Please Help me
I have grand 2. Stock rom 4.3 jelly bean. Rooted using kingroot apk.
And my device is ms103g. I repeat ms103g.
It has only one cwm recovery beta version.
I flashed it via odin.
After flashing a custom rom NOTE 4 ALPHA S6 PORT or ROM KK TECHMATE S ROM V1.0 4.4.2 NH3. It was flashed but when I reboot it stucks on boot logo.
After this I was switched off my mobile and rebooted to recovery. In mount s
ection system and data are not mounted. I was remount it and reboot but nothing happened please help me how to flash custom rom. Or is there any other recovery. Thanks in advance. Sorry for my bad English.
vowels787 said:
Please Help me
I have grand 2. Stock rom 4.3 jelly bean. Rooted using kingroot apk.
And my device is ms103g. I repeat ms103g.
It has only one cwm recovery beta version.
I flashed it via odin.
After flashing a custom rom NOTE 4 ALPHA S6 PORT or ROM KK TECHMATE S ROM V1.0 4.4.2 NH3. It was flashed but when I reboot it stucks on boot logo.
After this I was switched off my mobile and rebooted to recovery. In mount s
ection system and data are not mounted. I was remount it and reboot but nothing happened please help me how to flash custom rom. Or is there any other recovery. Thanks in advance. Sorry for my bad English.
Click to expand...
Click to collapse
try twrp for ms013g..it that too dosen't work,reflash stock rom via odin.
neonkat said:
try twrp for ms013g..it that too dosen't work,reflash stock rom via odin.
Click to expand...
Click to collapse
I was also did. But blank recovery open and phone reboot.
My device is ms103g and there is all recovery for ms013g.
In terminal emualter app it shows [email protected] I m very confused.
vowels787 said:
I was also did. But blank recovery open and phone reboot.
My device is ms103g and there is all recovery for ms013g.
In terminal emualter app it shows [email protected] I m very confused.
Click to expand...
Click to collapse
flash stock rom via odin
U need flash kitkat stock den do
Related
Tried to install CWM from rom manager 6.0.4.6 but i had 6.0.4.7.
This cus i have problem installing CM updates directly by pressing restart and install.
Efter this i was in a boot loop an could not access CWM only the DL mode. So i installed CWM from the original source i did the first time and then the boot was ok all the way but then tried PWR VOL+ HOME but then i gut in to the boot loop again untli i reinstalled the CWM tried once more but same result.
So now i have CWM installed and i can boot up but i cant access CWM to make backup or restore the previus one.
Any ideas of what could be wrong?
Wrong section
Sent from my SM-N900T using Tapatalk
6.0.4.7 is for KK bootloader. If you haven't that's why
go back to 4.6
I have kitkat cm11
maybe thats why it does not work now?
With one should i have? Link to dl pls.
Sorry if posting wrong could someone move it please?
spyvingen said:
I have kitkat cm11
maybe thats why it does not work now?
With one should i have? Link to dl pls.
Sorry if posting wrong could someone move it please?
Click to expand...
Click to collapse
its your bootloader thats still 4.3, cm kitkat works on the old bootloader .... just go and download a older version of cwm
ratcom said:
its your bootloader thats still 4.3, cm kitkat works on the old bootloader .... just go and download a older version of cwm
Click to expand...
Click to collapse
I upgraded to samsung stock kikat before and its non reversible as i got it does that matter?
to be frank, I never try to flash anything from ROM manager.
This tools I've left it very very long time ago.
Have you tried to reflash the KK stock firmware, since you said you are on KK already (to get your stock recovery first), make sure everything is ok. Then reflash the CWM through ODIN. Don't use ROM manager.
antique_sonic said:
to be frank, I never try to flash anything from ROM manager.
This tools I've left it very very long time ago.
Have you tried to reflash the KK stock firmware, since you said you are on KK already (to get your stock recovery first), make sure everything is ok. Then reflash the CWM through ODIN. Don't use ROM manager.
Click to expand...
Click to collapse
Could try that. The problem is i cant make a backup now when i dont have access to CWM
But if it is the only way sure i will try it.
Just bought a note 3 N900T. I used cf auto root and no problem. I went flash recovery through odin and no Im in a boot loop. Can someone help me?
Which recovery u flashed ?? Try another recovery..may b a bad download
Sent from my SM-G900F using XDA Free mobile app
goater1220 said:
Just bought a note 3 N900T. I used cf auto root and no problem. I went flash recovery through odin and no Im in a boot loop. Can someone help me?
Click to expand...
Click to collapse
Is it CWM recovery? You need a different version depending on if you were on stock 4.3 JB or stock 4.4 KK.
This thread has the CWM recoveries I've been using. If you were on 4.3 JB you need 6.0.4.5 or earlier. 4.4 KK needs any version after that.
Your stock does not need to be rooted to flash these recoveries normally.
1. Download correct recovery from thread depending on which stock version you have (4.3 or 4.4
2. Flash recovery with Odin 3.09
That should fix your bootloop.
Hi Guys
I'm on a note 3 n9005 a d have installed the lollipop firmware by the method shown here
http://forum.xda-developers.com/galaxy-note-3/general/guide-t2983873
but now since I have flashed CWM recovery all it tells me is Could not boot normal and goes back to download mode. Normal booting of the phone works fine.
Can anyone help with this ?
Thanks
Richie
Flash the latest version of TWRP (2.8.5).
how did you install cwm? Try using twrp flash it using pc odin.
Thanks for getting back to my guys.
I eventually flashed TW on and it worked then tried using ROM manager to put CWM on. All this got me was a recovery loop.
The problem I have is I have a CWM backup of my phone and want to restore it but cant using TW.
Any thoughts on how to get CWM working on the phone ?
is there any 2.8.5 TWRP for SM 9005?
I cant find any...
Greatdane said:
is there any 2.8.5 TWRP for SM 9005?
I cant find any...
Click to expand...
Click to collapse
C'mon... you can do better than that...
Hi,
I have rooted and installed TWRP on my 910F Note4 as I was fed up waiting on the lollipop update rolling out. I am currently on 4.4.4 and have made a full backup using TWRP of the stock rom.
My intention was flashing the Cyanogen ROM and using that, but i now see on sammobile there is a stock 5.01 rom available. I have a few questions about this.
1. If I flash to Cyanogen can I still revert back to the stock rom 4.4.4 I have made a backup with? I read somewhere there might be problems as I was on KitKat then moved to lollipop(Cyanogen).
2. Can I flash the stock lollipop rom from within TWRP? Or do you have to do this via ODIN?
3. If I flash the Lollipop stock ROM with Odin I assume I will lose root and TWRP? So this would have to done again?
Guess I am asking what is the best way to proceed?
Thanks again
Paul
pmlfrew said:
Hi,
I have rooted and installed TWRP on my 910F Note4 as I was fed up waiting on the lollipop update rolling out. I am currently on 4.4.4 and have made a full backup using TWRP of the stock rom.
My intention was flashing the Cyanogen ROM and using that, but i now see on sammobile there is a stock 5.01 rom available. I have a few questions about this.
1. If I flash to Cyanogen can I still revert back to the stock rom 4.4.4 I have made a backup with? I read somewhere there might be problems as I was on KitKat then moved to lollipop(Cyanogen).
2. Can I flash the stock lollipop rom from within TWRP? Or do you have to do this via ODIN?
3. If I flash the Lollipop stock ROM with Odin I assume I will lose root and TWRP? So this would have to done again?
Guess I am asking what is the best way to proceed?
Thanks again
Paul
Click to expand...
Click to collapse
hi Paul,
1. i beleve to flash CM from kitkat you will need to install the lollipop bootloader first.
2. You have to flash the stock rom via Odin, you will keep all apps settings and files but you will lose root (you u can re root in 3 minutes)
Best thing you could do is flash the stock rom first with odin, see how that feels (IMO its good been using it for months now) and then root it and back it up and flash CM12 (you dont have to flash any boatloader at this point)
grtz
Luc
Racinghart91 said:
hi Paul,
1. i beleve to flash CM from kitkat you will need to install the lollipop bootloader first.
2. You have to flash the stock rom via Odin, you will keep all apps settings and files but you will lose root (you u can re root in 3 minutes)
Best thing you could do is flash the stock rom first with odin, see how that feels (IMO its good been using it for months now) and then root it and back it up and flash CM12 (you dont have to flash any boatloader at this point)
grtz
Luc
Click to expand...
Click to collapse
Thanks will flash to lollipop today then....
pmlfrew said:
Thanks will flash to lollipop today then....
Click to expand...
Click to collapse
Ok tried to flash Stock O2 UK lollipop ROM via ODIN and got error message on screen. MD5 too big or something. Had to pull battery on phone. Had to then reflash TWRP. Got back into TWRP and tried to do a recovery of the backup I took but phone is stuck at Galaxy note 4 screen. It then shuts down and restarts and gets to the same screen again.
Do I try a different ROM? What can I do?
Thanks
Paul
pmlfrew said:
Ok tried to flash Stock O2 UK lollipop ROM via ODIN and got error message on screen. MD5 too big or something. Had to pull battery on phone. Had to then reflash TWRP. Got back into TWRP and tried to do a recovery of the backup I took but phone is stuck at Galaxy note 4 screen. It then shuts down and restarts and gets to the same screen again.
Do I try a different ROM? What can I do?
Thanks
Paul
Click to expand...
Click to collapse
I got it working by flashing the German non branded ROM... Got the error message again but then used a "All samsung recovery.tar" as stated on another post in here and it booted fine eventually... Now on Lollipop. Now time to flash with TWRP.... Again!!!
Please, i need help !
I need help, urgently !
My Note 4 SM-N910C does not work. I can enter the Recovery and the Download Mode. When attempting to install a Custom ROM gives me an error that says I have no data. In the internal memory I have 0mb.
I tried using odin, but I can not .. Salta error.
Someone who can make a backup of your phone (which is factory), leave me a link to download it? So I install the TWRP. Please.
They have another solution?
Thank you.:good:
I rooted my SM-G7102 using KingoRoot App for Windows.
Later I installed Twrp recovery using Odin 3.10.7 :http://forum.xda-developers.com/galaxy-grand-2/orig-development/twrp-unofficial-twrp-recovery-t2798433
Booted into recovery, did a factory reset and tried installing Resurrection Remix: http://forum.xda-developers.com/galaxy-grand-2/orig-development/rom-resurrection-remix-m-v5-6-7-t3360391
It installed successfully I latter install 6.0 micro gapps as advised on the ROM's Page and rebooted however it just showed me Sammy BootLogo and then a blue screen and then restarted again
I later did a complete format including /data and also tried installing CM13 unofficial: http://forum.xda-developers.com/galaxy-grand-2/orig-development/cm-13-0-ms013g-cyanogenmod-13-grand-2-t3299635
however same results.
Another alter I tried was installing both ROMs mentioned above without GAPPS however it didn't work too!
Would love to recieve some help, Thanks.
[EDIT]
p.s: I was using Samsung's Stock Andorid v4.3 firmware before flashing.
Also here is my recovery log: https://gist.githubusercontent.com/ArchKudo/ab4738a2482121fde280643fc86b5ab6/raw/0cae8a800552fc331d841bd1a6798c9a41e524ec/recovery.log
[EDIT 2]
It worked! Installed 4.4.2 and re-flashed
Flash 4.4.2 firmware
Then flash custom roms
Igor2906 said:
Flash 4.4.2 firmware
Then flash custom roms
Click to expand...
Click to collapse
Thanks for the reply!
Should I use the same TWRP recovery as mentioned before?
Also is 4.3 known to cause bootloops or is there some guesswork involved?
noobno.NaN said:
Thanks for the reply!
Should I use the same TWRP recovery as mentioned before?
Also is 4.3 known to cause bootloops or is there some guesswork involved?
Click to expand...
Click to collapse
Yeah use TWRP
me2 facing same problrm but i have first install from official 4.4.2 firmeware plz help