Hey guys i've Hard Bricked my Yureka. Phone Doesnt turn on nor goes to fastbooot, instead is only detected in windows as Qusbs-Bulk. Please help ME
Follow the steps shown in link below;
https://cyngn.com/support/
http://forums.yuplaygod.com/threads/factory-images-and-flashing-tools-official.2178/
But my phone does not boot into fastboot
Search at play god forum, there are some procedures given there which may solve your prob. http://forums.yuplaygod.com/threads/help-completely-bricked.4641/#post-45794
HI thanks for help but in all above cases they were soft bricked ..i.e their phones booted in fastboot but mine isnt.
Hmmm ... seriously worried situation haan. {Kiya kya tumne}
If you can tell us what exactly you did, may be then we can help.
I also hardbricked when i tried to port MIUI. But i got replaced by YU without any cost and within 3 days
Exactly me too flashed miui of f2 without boot.img..Was trying to port...
@ Suhas Is the new phone same as old one or a used one??
suhas.holla said:
I also hardbricked when i tried to port MIUI. But i got replaced by YU without any cost and within 3 days
Click to expand...
Click to collapse
I also hardbricked when i tried to port MIUI, Now waiting for the repacement.
Called them and raised the ticket 6 days before, but they are yet to dispatch.. . . . Very frustrating !
Do you have any information on how to unbrick. I searched much but wouldn't find files to unbrick !
1. 8939_msimage.mbn
2. MPRG8939.hex
3. rawprogram0.xml
4. patch0.xml
Hope some one comes to rescue me :crying:
Video Tutorial HOW TO UNBRICK YUREKA
Srry i cant post the youtube link as i am new here
Just go to youtube
Search kanwal deep unbrick yureka
And watch the video
To go in fastbool mode remove battery insert again and press vol up while connecting usb
quakze said:
I also hardbricked when i tried to port MIUI, Now waiting for the repacement.
Called them and raised the ticket 6 days before, but they are yet to dispatch.. . . . Very frustrating !
Do you have any information on how to unbrick. I searched much but wouldn't find files to unbrick !
1. 8939_msimage.mbn
2. MPRG8939.hex
3. rawprogram0.xml
4. patch0.xml
Hope some one comes to rescue me :crying:
Click to expand...
Click to collapse
ahh Same situation I too searched for that files when i had bricked my device
Since the chipset is new. So not able to find
suhas.holla said:
ahh Same situation I too searched for that files when i had bricked my device
Since the chipset is new. So not able to find
Click to expand...
Click to collapse
I have got rom of Huawei C199s (MSM8939), which has many file packed into UPDATE.APP.
I have unpacked it, but the file name and extensions are unknown.
At present I am trying to identify the msimage.mbm and mprg files.
The rom link is http://www.needrom.com/wp-content/uploads/2015/03/C199s-V100R001C92B260-Telecom.zip
Shrihari007 said:
Hey guys i've Hard Bricked my Yureka. Phone Doesnt turn on nor goes to fastbooot, instead is only detected in windows as Qusbs-Bulk. Please help ME
Click to expand...
Click to collapse
ask for replace in customer care. as they told they will replace your mobile even after unlocking boot loader, root.
my device also gone hard bricked not get into the fastboot mode..
and no customer care no. to contact not correct > this one 18602122122
any help
thnks..
You guys can take a look at this thread -
http://forum.xda-developers.com/yureka/help/question-qualcomm-download-mode-k-t3068040
Hit thanks to the creator and me if helped.
suhas.holla said:
I also hardbricked when i tried to port MIUI. But i got replaced by YU without any cost and within 3 days
Click to expand...
Click to collapse
What did you tell the customer support about your phone getting bricked.
I tried calling the support, but they said that they will chargers. 3000 for replacing .
please help
my device got bricked 2 days ago and now there is no fastboot mode and not even the led lights showing up if the device is connected to the pc!! and whats even worse the cc is not picking up the calls
my mobile also hard bricked.
suhas.holla said:
I also hardbricked when i tried to port MIUI. But i got replaced by YU without any cost and within 3 days
Click to expand...
Click to collapse
hi.... my yu yureka also get hard bricked after installing lollipop update from yu.. please tell me the steps you followed to replace your yureka...... please reply fast...
:crying::crying::crying:
issue regarding in functionality in yu yureka after upgrading with lpllipop
dear sir,
my name is anurag. i am using yureka ao 5510 phone after launching official update for phone i upgrade my phone.
i faced sevral problem after updating. the list are provided below.
1) overheating device than normal one while comparing with kitkat.
2) automatically turned off and un- responsive and on screen multicolor circle appeared wih cross over circle, its upto 5-6 hrs after that suddenly screen appeared after turning on mobile and start working.(in this process sevral times i remove battery & reinsert and trying to start it normally).
3) when phone connecting to wi-fi hotspot network (apple tablet over 3g) and i am trying to update apps from playstore its not updated(google play services unfortunately stopped) over wi fi network, but its working good on mobile data.
4) now currently issue in brightnesss control and in setting < storage option < USB computer connection the checkbox option are not apperared & phone not connected to computer(using windows 8.1 ),
please kindly fix this buges...
and provide some patch or system updates as earliar as possible to overcomethis issue.
HELP ME :crying::crying::crying::crying::crying: MY YUREKA PLUS STUCKED IN THE YU LOGO ....NEVER CAME OVER .THE LOGO CAME AGAIN AND AGAIN..IT RUNNING ON COS 12.1...AND I INSTALLED TWRP THEN I FACTORY RESET THE PHONE...AFTER THAT I REBOOT INTO RECOVERY BUT PHONE STUCKED IN YU LOGO.... HELP ME FRIENDS .....IM A NOOB....THANKS IN ADVANCE
flash stock ROM
Hey buddy there is nobody noob
Just downloads your stock ROM and flash it
JEEVAMYIL said:
HELP ME :crying::crying::crying::crying::crying: MY YUREKA PLUS STUCKED IN THE YU LOGO ....NEVER CAME OVER .THE LOGO CAME AGAIN AND AGAIN..IT RUNNING ON COS 12.1...AND I INSTALLED TWRP THEN I FACTORY RESET THE PHONE...AFTER THAT I REBOOT INTO RECOVERY BUT PHONE STUCKED IN YU LOGO.... HELP ME FRIENDS .....IM A NOOB....THANKS IN ADVANCE
Click to expand...
Click to collapse
1.) Dont write in capitals as it denotes you are shouting
2.) Your phone is soft brick , search youtube for yu yureka softbrick and you will get helpful video.
3.) Dont worry
Thanks#toriya and #king
Why isnt my pc not detecting yu yureka plus CM 12 ON COMMAND PROMPT.I WANT TO ROOT.please help me guys
swegswegnoicenoice said:
Why isnt my pc not detecting yu yureka plus CM 12 ON COMMAND PROMPT.I WANT TO ROOT.please help me guys
Click to expand...
Click to collapse
you might have problem with the drivers . Install pdanet+ in Pc and then check it , it will work you for sure
recently i ported miui v7 for yureka but it got me bootloops
so i tried flashing stock 5.1.1 rom via fastboot but then my electricity went off.
now when i connect to my pc or charger a red light turn on.
i installed drivers of qloader 9008 and device is detected but everytime i try flashing with qfil i got shara error.
its been 5 days after contacting cc they said ur device will be replaced or repaired within 15 days, and u will get a call from
shipping company to get the device to our service centre but no calls.
any1 who unbricked yureka ?>?
msg me on xda or fb vkd linkin(9871633867)
Even mine Yureka also hard bricked...
Please help me, same as above , not getting ON only showing red light when USB connected...
i was using Miui7 , i got update once, after automatic update it went blank.
Please help me guys.... !
as i was having a bootloop problem when i tried to root my Yureka which was on Lollipop.
So searched for a softbrick fix guide and I used the yureka fastboot tools with cm11 stock by allflash.bat.
the procedure finished and the cmd window closed but when i pressed the power button it won't start.
when i connect it to the PC it won't recognize.
I think I have hardbricked my phone because i flashed a 32bit over a 64bit.
can anyone help me please?
some guide as to revive my phone?
Also my phone is not in the warranty period anymore.
I'll really appreciate if someone gives me a fix for this.
You shouldn't have used a batch file like allflash.bat - Did you notice any errors/issues while flashing the ROM ?
Follow this blog step by step - http ://webtrickz.com/how-to-downgrade-yureka-from-cm12-lollipop-to-cm11-kitkat
All should be good. Best of Luck.
dalvi.nishant9 said:
as i was having a bootloop problem when i tried to root my Yureka which was on Lollipop.
So searched for a softbrick fix guide and I used the yureka fastboot tools with cm11 stock by allflash.bat.
the procedure finished and the cmd window closed but when i pressed the power button it won't start.
when i connect it to the PC it won't recognize.
I think I have hardbricked my phone because i flashed a 32bit over a 64bit.
can anyone help me please?
some guide as to revive my phone?
Also my phone is not in the warranty period anymore.
I'll really appreciate if someone gives me a fix for this.
Click to expand...
Click to collapse
http://forum.xda-developers.com/yureka/help/recover-yu-yureka-softbricks-hardbricks-t3477139
Hi
I had bricked my yureka ..while trying to change custom rom , I have already bricked my yureka once but I recovered with help of xda forums
but now the issue is *when I trying to power on the device it suddenly goes to fastboot mode and gets restarts .it's repeat untill the battery is removed *
now the device is not showing in my PC ..it shows usb not recognized ...
it goes to fastboot mode
it is charging
I don't know what to do .... plz help me friends....