Database Users

No screen after firmware flash with odin

hey,
i've updatet my note with odin 1.85 and the firmware "N7000XXKK9_N7000OXAKK9_N7000XXKK5_HOME.tar.md5".
My problem is that my note has no screen any more. I hear the sound im able to unlock my screen (without seeing it) but there are only the sounds of my note. I've flashed a second time (not easy to get to the note to the download mode without seeing anything.
So what can I do now?
My note was rooted first also by using odin and the CF-Root-SGN_XX_DBT_KK9-v5.0-CWM5.zip
have you any idea what I could try now?
greetings flo

From your description, you did everything right. But you may get a corrupted file. Download the same file again from the below source. (You will lose your root access, but I'm sure you won't mind re-root it later).
Here are the steps I did to make my Galaxy Note GT-N7000 work after a scary day:
I found a place to download firmware at:http://fus.nanzen.se/
just in case you can't see the link: h**p://fus(dot)nanzen(dot)se/
(from Hoffighter's posting) http://forum.xda-developers.com/show....php?t=1350960
I downloaded Fus Check Downloader 2.1 and downloaded Firmware N7000XXKK9 (for Germany). It will automatically decode the .enc2 file to.zip file
I extracted the .zip file generated from decoding file to a folder and I got
"N7000XXKK9_N7000OXAKK9_N7000XXKK5_HOME.tar.md 5" file.
I downloaded Odin3 1.85 (search "odin3 1.85" in XDA Dev forum)
opened Odin3 1.85, attach the file .md5 to the PDA field on Odin.
I went to download mode on mt G-Note (Power + home + Volume down)
and click start. It took about 6 to 7 minutes to do the flashing.
Just remember to put the .tar or .md5 file in PDA only..

my display is back
yappoe said:
From your description, you did everything right. But you may get a corrupted file. Download the same file again from the below source. (You will lose your root access, but I'm sure you won't mind re-root it later).
Here are the steps I did to make my Galaxy Note GT-N7000 work after a scary day:
I found a place to download firmware at:http://fus.nanzen.se/
just in case you can't see the link: h**p://fus(dot)nanzen(dot)se/
(from Hoffighter's posting) http://forum.xda-developers.com/show....php?t=1350960
I downloaded Fus Check Downloader 2.1 and downloaded Firmware N7000XXKK9 (for Germany). It will automatically decode the .enc2 file to.zip file
I extracted the .zip file generated from decoding file to a folder and I got
"N7000XXKK9_N7000OXAKK9_N7000XXKK5_HOME.tar.md 5" file.
I downloaded Odin3 1.85 (search "odin3 1.85" in XDA Dev forum)
opened Odin3 1.85, attach the file .md5 to the PDA field on Odin.
I went to download mode on mt G-Note (Power + home + Volume down)
and click start. It took about 6 to 7 minutes to do the flashing.
Just remember to put the .tar or .md5 file in PDA only..
Click to expand...
Click to collapse
Thanks for your post I tried it 3 times but it won't work. The screen was still black.
now what I did:
I downloaded the files from here: http://www.samsdroid.com/2011/11/samsung-galaxy-note-n7000-flashing.html
I did it like they subscribe step by step
** Open Odin3 v1.85 software
** Check Re-Partition, Auto Reboot, and F. Reset Time options.
** Check and select .pit file ( looks like Q1_20110914_16GB.pit )
** Check and select PDA file ( Looks like CODE_N7000xxxxx_CL627135_REV02_user_low_ship.tar.md5 )
** Check and select Phone file ( Looks like MODEM_N7000xxxxx_REV_05_CL1067428.tar.md5 )
** Check and select CSC file ( looks like GT-N7000-MULTI-CSC-Oxxxxx.tar.md5 )
after the first reboot my display shows an error by receiving the tar files.
I did the same procedure a second time and my sgn retourned with Kernel 2.3.5.
Im happy now that my sgn is back!
thanks a lot

[Q] Corrupted tar files from sammobile and samsung updates

I looking for updated roms (with no operator customisations) for s5360b but all the latest versions comes with corrupted tar files and I'm unable to extract the files.
Tried to repair the tar file with no success either.
7zip/winrar latest versions unable to decompress it...
There is another way or my sources are bad?

Maybe download didn't get complete.. Try again..
** rooting is new for me,
nd i am a noob to root....**

Only option: Redownload the whole thing again
This post is in compliance with the national potato safety regulation.
[Galaxy S 4 LTE]

gusnd said:
I looking for updated roms (with no operator customisations) for s5360b but all the latest versions comes with corrupted tar files and I'm unable to extract the files.
Tried to repair the tar file with no success either.
7zip/winrar latest versions unable to decompress it...
There is another way or my sources are bad?
Click to expand...
Click to collapse
they are not corrupt. their headers are such that you cant see or extract the files inside. only flash them in odin in pda section or if you want files then use splitfus2 by doky73

amit34521 said:
they are not corrupt. their headers are such that you cant see or extract the files inside. only flash them in odin in pda section or if you want files then use splitfus2 by doky73
Click to expand...
Click to collapse
I tried to flash them directly but got an error, that's why I'm trying to decompress it. I just downloaded it many times always getting the same results.
I'll try to use a 2.3.5 release and then update it with Kies. I didn't tried using another country's rom afraid of modem file incompatibility issues, I'll do some more tests

gusnd said:
I tried to flash them directly but got an error, that's why I'm trying to decompress it. I just downloaded it many times always getting the same results.
I'll try to use a 2.3.5 release and then update it with Kies. I didn't tried using another country's rom afraid of modem file incompatibility issues, I'll do some more tests
Click to expand...
Click to collapse
flashd it in which section?????????

amit34521 said:
flashd it in which section?????????
Click to expand...
Click to collapse
Pda

Corrupted .tar files
gusnd said:
I looking for updated roms (with no operator customisations) for s5360b but all the latest versions comes with corrupted tar files and I'm unable to extract the files.
Tried to repair the tar file with no success either.
7zip/winrar latest versions unable to decompress it...
There is another way or my sources are bad?
Click to expand...
Click to collapse
Well first of all sorry for being late, seems you haven't resolved your problem or have you? If not, then I wanna suggest you something here. I've also faced a situation like .tar file corruption in my past and resolved it successfully, believe me. How did you try to repair the .tar file? Did you use any third-party application like a repair or recovery software? I also used a third-party recovery application named as SysInfoTools Archive Recovery, to repair my corrupt .tar files. I had two very important .tar files which were corrupted, don't know why. Then I came to know about this application and used it. Though it didn't execute a hundred percent recovery, but I was quite satisfied to recover my maximum data from those corrupt .tar files. I will recommend you check its free demo version first. If it shows your preview of your recovered data, this means the data has been successfully recovered from the corrupt file. You can download the demo of this software from sysinfotools' website.
If this application helps you, please let me know.
Regards.

gusnd said:
I looking for updated roms (with no operator customisations) for s5360b but all the latest versions comes with corrupted tar files and I'm unable to extract the files.
Tried to repair the tar file with no success either.
7zip/winrar latest versions unable to decompress it...
There is another way or my sources are bad?
Click to expand...
Click to collapse
flash the .tar file in pda section
they are not corrupt
they are just un-decompressable

Shw-m250k 4.1.2 firmware

If you want SHW-M250K firmware and you are searching that. Then I will say you have come to the right place.
N.B: Sammobile has published a corrupted zip file of latest firmware M250KKKJMG1. for that reason you will have to download M250KKKJMB1 to upgrade M250KKKJMG1
I am uploading the latest Stock firmware of SHW-M250K 4.1.2 to google drive, mediafire.
links:
you will get links tomorrow . stay tuned
Google Drive: https:// drive. google. com /file/d/0B8Uc2onR8VpsU0xZeG9nZXdGMEU/edit?usp=sharing
Mediafire:
Instruction:
If you are using roms of GT-I9100 (International), Then you must flash pit file with odin otherwise you will have boot loop.
Use the provided pit file for pit option and pda for tar.md5 option.

Can i install stock ROM(zip file) using TWRP? N910F

Lot of confusion please help i want to go back to stock for my gear VR
According to
this thread where i posted photos of my phones INFO
I downloaded N910F( UK BTU) 6.0.1 firmware (.ZIP) file
When i tried to flash using TWRP it says ZIP file is corrupted.
I downloaded it from two website
sammobile
and
samsung.org
both are corrupted(it should not be i think)
When i look into it it has only one file .tar.md5
i tried to extarct it using winrar and it says file is corrpted
\BTU-N910FXXS1DQFA-20170726090446.zip: The archive is corrupt
Although it extracted the N910FXXS1DQFA_N910FBTU1DPL1_N910FXXS1DQA1_HOME.tar.md5
In both files i got the same result same
i dont know what to do now
I tried Odin and it stuck at "there is no pit file partition" or something like that
(yes i wiped out cache and system delvik etc.)
I also tried inserting PIT file but no luck
i would prefer without Odin if possible
As I can go into TWRP recovery
Please guide me or at least answer a few question
1. Is it even possible to flash stock rom using twrp like i flash other roms?
2. Can i install extracted .md5 file from that zip? will it be the same like stock zip?
3. Why my Both zip files are corrpted? your opinion?
4. Should i download again same stock rom?
5. Can / Should i flash or download and /or downgrade Stock firmware (same 6.0.1 )but different release date?
6. Am i downloading the right firmware for my device here is my device details posted??
Lot of confusion please help i want to go back to stock for my gear VR

Based on the amount and type of questions, I believe you need to read up on basic Note 4 flashing/customization knowledge first. Go and read up on the stickies.
Without knowledge and experience, we can tell you how to do a brain surgery, but doesn't make you a surgeon.
No, twrp cannot be used to flash stock rom. Stock rom are most of the time md5 files, used by ODIN only.
Since you downloaded the zip files, use the "Test" function to see if it is corrupted?
Maybe you should just flash a stock based custom rom with VR and be done with it.
https://forum.xda-developers.com/no...om-bob4-devbase-multi-csc-safe-bloat-t3033881
---------- Post added at 01:13 PM ---------- Previous post was at 01:05 PM ----------
Oh, according to your screen shots, DBT is in a carrier in Germany?

I installed BTU (UK) stock rom and it is is working fine (using odin)

nicholes said:
Lot of confusion please help i want to go back to stock for my gear VR
According to
this thread where i posted photos of my phones INFO
I downloaded N910F( UK BTU) 6.0.1 firmware (.ZIP) file
When i tried to flash using TWRP it says ZIP file is corrupted.
I downloaded it from two website
sammobile
and
samsung.org
both are corrupted(it should not be i think)
==================================================
Check your Winzip version. It may be old and doesnt handle large zipfiles too well. I had the same problem but I know the file was good as I downloaded it at work, and Winzip worked just fine; but when I got home, winzip failed on my pc - old 8.1 version. I used the trial version just fine to unzip.
Click to expand...
Click to collapse

Flashing Rom
"I downloaded N910F( UK BTU) 6.0.1 firmware (.ZIP) file
When i tried to flash using TWRP it says ZIP file is corrupted.
I downloaded it from two website "​
Did you keep the ROM as a Zip file when you loaded it in to Odin?
Do not unzip the ROM file.
Try again.

Fool2242 said:
"I downloaded N910F( UK BTU) 6.0.1 firmware (.ZIP) file
When i tried to flash using TWRP it says ZIP file is corrupted.
I downloaded it from two website "
Did you keep the ROM as a Zip file when you loaded it in to Odin?
Do not unzip the ROM file.
Try again.
Click to expand...
Click to collapse
As far as I remember it was zip file

Downgrade to previous version & SW REV. Check Fail

Samsung Bootloader does not allow to downgrade the ROM, Therefore I found a way to Downgrade Specially from Nougat to Marshmallow and Solution to SW REV. Check Fail.
Required:
1. Marshmallow or which you need Odin Firmware (Can be downloaded from Sammobile) for your Mobile.
2. 7zip installed.
3. WinRar installed (if 7Zip Shows error while Extracting the .tar file of firmware). I recommend this for extracting the tar file.
Steps:
1. Rename the Firmware from .tar.md5 to .tar so that WinRar can open it.
2. Extract the Firmware files except sboot.bin, cm.bin and modem.bin .
3. Now compress the extracted files to tar archive using 7Zip.
4. Done, Firmware is ready to flash through Odin.
cm.bin and sboot.bin causes to SW Rev check fail so If you face this error remove them from firmware.
If you like please hit Thanks button.

Hello, So basically we need to remove all .bin files? ok
I also need to downgrade my modem.bin because I'm facing Wi-Fi and Bluetooth issues (they don't turn on). So is it possible to flash those files separately after? Will it work?

x.shayan.x said:
Hello, So basically we need to remove all .bin files? ok
I also need to downgrade my modem.bin because I'm facing Wi-Fi and Bluetooth issues (they don't turn on). So is it possible to flash those files separately after? Will it work?
Click to expand...
Click to collapse
Yes you can flash

Afzal922 said:
Yes you can flash
Click to expand...
Click to collapse
I removed the files you mentioned and I flashed marshmallow on Nougat successfully but i have constantly getting error message ""Unfortunately, Touchwiz has stopped"" and "Unfortunately, The process. Android.process has stopped" and I can't boot in my mobile. Please help..!

alipezu said:
I removed the files you mentioned and I flashed marshmallow on Nougat successfully but i have constantly getting error message ""Unfortunately, Touchwiz has stopped"" and "Unfortunately, The process. Android.process has stopped" and I can't boot in my mobile. Please help..!
Click to expand...
Click to collapse
Try another firmware.

Afzal922 said:
Samsung Bootloader does not allow to downgrade the ROM, Therefore I found a way to Downgrade Specially from Nougat to Marshmallow and Solution to SW REV. Check Fail.
Required:
1. Marshmallow or which you need Odin Firmware (Can be downloaded from Sammobile) for your Mobile.
2. 7zip installed.
3. WinRar installed (if 7Zip Shows error while Extracting the .tar file of firmware). I recommend this for extracting the tar file.
Steps:
1. Rename the Firmware from .tar.md5 to .tar so that WinRar can open it.
2. Extract the Firmware files except sboot.bin, cm.bin and modem.bin .
3. Now compress the extracted files to tar archive using 7Zip.
4. Done, Firmware is ready to flash through Odin.
cm.bin and sboot.bin causes to SW Rev check fail so If you face this error remove them from firmware.
If you like please hit Thanks button.
Click to expand...
Click to collapse
mind telling us how to flash the .bin files to get back signals and wifi and other stuff?

if we not going to flash the CM and modem, i dont think the Wifi and the mobile signal is going to work....
Regards

i try this wat downgrade samsung 51 and its not work

Afzal922 said:
Samsung Bootloader does not allow to downgrade the ROM, Therefore I found a way to Downgrade Specially from Nougat to Marshmallow and Solution to SW REV. Check Fail.
Required:
1. Marshmallow or which you need Odin Firmware (Can be downloaded from Sammobile) for your Mobile.
2. 7zip installed.
3. WinRar installed (if 7Zip Shows error while Extracting the .tar file of firmware). I recommend this for extracting the tar file.
Steps:
1. Rename the Firmware from .tar.md5 to .tar so that WinRar can open it.
2. Extract the Firmware files except sboot.bin, cm.bin and modem.bin .
3. Now compress the extracted files to tar archive using 7Zip.
4. Done, Firmware is ready to flash through Odin.
cm.bin and sboot.bin causes to SW Rev check fail so If you face this error remove them from firmware.
If you like please hit Thanks button.
Click to expand...
Click to collapse
Hello, this is a well old post. Would this work with the Note 20 Ultra Snapdragon version?

N1NJATH3ORY said:
Hello, this is a well old post. Would this work with the Note 20 Ultra Snapdragon version?
Click to expand...
Click to collapse
Yes