If you want SHW-M250K firmware and you are searching that. Then I will say you have come to the right place.
N.B: Sammobile has published a corrupted zip file of latest firmware M250KKKJMG1. for that reason you will have to download M250KKKJMB1 to upgrade M250KKKJMG1
I am uploading the latest Stock firmware of SHW-M250K 4.1.2 to google drive, mediafire.
links:
you will get links tomorrow . stay tuned
Google Drive: https:// drive. google. com /file/d/0B8Uc2onR8VpsU0xZeG9nZXdGMEU/edit?usp=sharing
Mediafire:
Instruction:
If you are using roms of GT-I9100 (International), Then you must flash pit file with odin otherwise you will have boot loop.
Use the provided pit file for pit option and pda for tar.md5 option.
Related
After download Official Firmware 4.3 for s4, unzip it but there is only I9500XXUEMJ5_I9500OLBEMJ5_I9500DXUEMJ5_HOME.tar.md5 file. There is not 4 file AP,BL,CP, CSC. How can i flash by Odin? Please help me. Can i flash just like a custom ROM?
jaychou8899 said:
After download Official Firmware 4.3 for s4, unzip it but there is only I9500XXUEMJ5_I9500OLBEMJ5_I9500DXUEMJ5_HOME.tar.md5 file. There is not 4 file AP,BL,CP, CSC. How can i flash by Odin? Please help me. Can i flash just like a custom ROM?
Click to expand...
Click to collapse
If it ain't broken, don't fix it, I have never actually tried ODIN v3.09 but v3.04 and even 1.85 still work well. And you can flash that through PDA in those versions of ODIN.
However if you must use ODIN v3.09, use 'AP' option and place that file you mentioned there. Cheers!
Here you find the how to for flashing with Odin ( post 1 ) You only need the tar.
Pda in Odin 3.09 is AP
http://forum.xda-developers.com/showthread.php?p=41072377
GT-I9505 ~ SlimBean / Aosp 4.3.1
i am trying to flash stock firmware N9005XXUGBOH8 but after download it i got error with winrar while extract tells me "archive is corrupt" and continue extracting , should i flash it or it may damage my mobile !
Try to download again with another browser. Do not flash corrupted fw coz will fail
After a download always check for MD5 value, and match it with the given value. If they don't match then you have a corrupt download, don't even think about flashing it, it won't be flashed anyway.
For MD5 value I use HashTab. Google for the link.
If you're downloading from sammobile.com, the download will be a zip file which unzips to a tar.md5 file. Don't unzip it beyond this.
--
thanks all for reply
i downloaded it form this samsung-firmware.org and download it before from link someone posted here and same problem in extracting , i will download it from sammobile and see
OH8 of Lebanon:
http://www.sammobile.com/firmwares/download/55656/N9005XXUGBOH8_N9005OJVGBOH1_LEB/
OH8 of Iraq:
http://www.sammobile.com/firmwares/download/55657/N9005XXUGBOH8_N9005OJVGBOH1_MID/
--
i downloaded it from sammobile and i have the same problem in extracting
postimg.org/image/twq3p27lb
Dont't use Winrar, try 7zip to unzip the file.
Lot of confusion please help i want to go back to stock for my gear VR
According to
this thread where i posted photos of my phones INFO
I downloaded N910F( UK BTU) 6.0.1 firmware (.ZIP) file
When i tried to flash using TWRP it says ZIP file is corrupted.
I downloaded it from two website
sammobile
and
samsung.org
both are corrupted(it should not be i think)
When i look into it it has only one file .tar.md5
i tried to extarct it using winrar and it says file is corrpted
\BTU-N910FXXS1DQFA-20170726090446.zip: The archive is corrupt
Although it extracted the N910FXXS1DQFA_N910FBTU1DPL1_N910FXXS1DQA1_HOME.tar.md5
In both files i got the same result same
i dont know what to do now
I tried Odin and it stuck at "there is no pit file partition" or something like that
(yes i wiped out cache and system delvik etc.)
I also tried inserting PIT file but no luck
i would prefer without Odin if possible
As I can go into TWRP recovery
Please guide me or at least answer a few question
1. Is it even possible to flash stock rom using twrp like i flash other roms?
2. Can i install extracted .md5 file from that zip? will it be the same like stock zip?
3. Why my Both zip files are corrpted? your opinion?
4. Should i download again same stock rom?
5. Can / Should i flash or download and /or downgrade Stock firmware (same 6.0.1 )but different release date?
6. Am i downloading the right firmware for my device here is my device details posted??
Lot of confusion please help i want to go back to stock for my gear VR
Based on the amount and type of questions, I believe you need to read up on basic Note 4 flashing/customization knowledge first. Go and read up on the stickies.
Without knowledge and experience, we can tell you how to do a brain surgery, but doesn't make you a surgeon.
No, twrp cannot be used to flash stock rom. Stock rom are most of the time md5 files, used by ODIN only.
Since you downloaded the zip files, use the "Test" function to see if it is corrupted?
Maybe you should just flash a stock based custom rom with VR and be done with it.
https://forum.xda-developers.com/no...om-bob4-devbase-multi-csc-safe-bloat-t3033881
---------- Post added at 01:13 PM ---------- Previous post was at 01:05 PM ----------
Oh, according to your screen shots, DBT is in a carrier in Germany?
I installed BTU (UK) stock rom and it is is working fine (using odin)
nicholes said:
Lot of confusion please help i want to go back to stock for my gear VR
According to
this thread where i posted photos of my phones INFO
I downloaded N910F( UK BTU) 6.0.1 firmware (.ZIP) file
When i tried to flash using TWRP it says ZIP file is corrupted.
I downloaded it from two website
sammobile
and
samsung.org
both are corrupted(it should not be i think)
==================================================
Check your Winzip version. It may be old and doesnt handle large zipfiles too well. I had the same problem but I know the file was good as I downloaded it at work, and Winzip worked just fine; but when I got home, winzip failed on my pc - old 8.1 version. I used the trial version just fine to unzip.
Click to expand...
Click to collapse
Flashing Rom
"I downloaded N910F( UK BTU) 6.0.1 firmware (.ZIP) file
When i tried to flash using TWRP it says ZIP file is corrupted.
I downloaded it from two website "
Did you keep the ROM as a Zip file when you loaded it in to Odin?
Do not unzip the ROM file.
Try again.
Fool2242 said:
"I downloaded N910F( UK BTU) 6.0.1 firmware (.ZIP) file
When i tried to flash using TWRP it says ZIP file is corrupted.
I downloaded it from two website "
Did you keep the ROM as a Zip file when you loaded it in to Odin?
Do not unzip the ROM file.
Try again.
Click to expand...
Click to collapse
As far as I remember it was zip file
Samsung Bootloader does not allow to downgrade the ROM, Therefore I found a way to Downgrade Specially from Nougat to Marshmallow and Solution to SW REV. Check Fail.
Required:
1. Marshmallow or which you need Odin Firmware (Can be downloaded from Sammobile) for your Mobile.
2. 7zip installed.
3. WinRar installed (if 7Zip Shows error while Extracting the .tar file of firmware). I recommend this for extracting the tar file.
Steps:
1. Rename the Firmware from .tar.md5 to .tar so that WinRar can open it.
2. Extract the Firmware files except sboot.bin, cm.bin and modem.bin .
3. Now compress the extracted files to tar archive using 7Zip.
4. Done, Firmware is ready to flash through Odin.
cm.bin and sboot.bin causes to SW Rev check fail so If you face this error remove them from firmware.
If you like please hit Thanks button.
Hello, So basically we need to remove all .bin files? ok
I also need to downgrade my modem.bin because I'm facing Wi-Fi and Bluetooth issues (they don't turn on). So is it possible to flash those files separately after? Will it work?
x.shayan.x said:
Hello, So basically we need to remove all .bin files? ok
I also need to downgrade my modem.bin because I'm facing Wi-Fi and Bluetooth issues (they don't turn on). So is it possible to flash those files separately after? Will it work?
Click to expand...
Click to collapse
Yes you can flash
Afzal922 said:
Yes you can flash
Click to expand...
Click to collapse
I removed the files you mentioned and I flashed marshmallow on Nougat successfully but i have constantly getting error message ""Unfortunately, Touchwiz has stopped"" and "Unfortunately, The process. Android.process has stopped" and I can't boot in my mobile. Please help..!
alipezu said:
I removed the files you mentioned and I flashed marshmallow on Nougat successfully but i have constantly getting error message ""Unfortunately, Touchwiz has stopped"" and "Unfortunately, The process. Android.process has stopped" and I can't boot in my mobile. Please help..!
Click to expand...
Click to collapse
Try another firmware.
Afzal922 said:
Samsung Bootloader does not allow to downgrade the ROM, Therefore I found a way to Downgrade Specially from Nougat to Marshmallow and Solution to SW REV. Check Fail.
Required:
1. Marshmallow or which you need Odin Firmware (Can be downloaded from Sammobile) for your Mobile.
2. 7zip installed.
3. WinRar installed (if 7Zip Shows error while Extracting the .tar file of firmware). I recommend this for extracting the tar file.
Steps:
1. Rename the Firmware from .tar.md5 to .tar so that WinRar can open it.
2. Extract the Firmware files except sboot.bin, cm.bin and modem.bin .
3. Now compress the extracted files to tar archive using 7Zip.
4. Done, Firmware is ready to flash through Odin.
cm.bin and sboot.bin causes to SW Rev check fail so If you face this error remove them from firmware.
If you like please hit Thanks button.
Click to expand...
Click to collapse
mind telling us how to flash the .bin files to get back signals and wifi and other stuff?
if we not going to flash the CM and modem, i dont think the Wifi and the mobile signal is going to work....
Regards
i try this wat downgrade samsung 51 and its not work
Afzal922 said:
Samsung Bootloader does not allow to downgrade the ROM, Therefore I found a way to Downgrade Specially from Nougat to Marshmallow and Solution to SW REV. Check Fail.
Required:
1. Marshmallow or which you need Odin Firmware (Can be downloaded from Sammobile) for your Mobile.
2. 7zip installed.
3. WinRar installed (if 7Zip Shows error while Extracting the .tar file of firmware). I recommend this for extracting the tar file.
Steps:
1. Rename the Firmware from .tar.md5 to .tar so that WinRar can open it.
2. Extract the Firmware files except sboot.bin, cm.bin and modem.bin .
3. Now compress the extracted files to tar archive using 7Zip.
4. Done, Firmware is ready to flash through Odin.
cm.bin and sboot.bin causes to SW Rev check fail so If you face this error remove them from firmware.
If you like please hit Thanks button.
Click to expand...
Click to collapse
Hello, this is a well old post. Would this work with the Note 20 Ultra Snapdragon version?
N1NJATH3ORY said:
Hello, this is a well old post. Would this work with the Note 20 Ultra Snapdragon version?
Click to expand...
Click to collapse
Yes
Hello guys!
I saw that the OneUI update is rolling out in Russia, I wanted to try it, I downloaded samsung drinvers, odin latest version v3.13.3 and accesed samobile website and downloaded the SER firmware, i opened all 5 files, bl, ap etc in the right field in odin then i went donwload mode but when i pressed start, i got this error re partition failed and on the phone something with the PIT file, then after a day I tried again to download, i waited cca 30 mins, the file says that is 1,1GB then when it was done i wanted to extract and it said that the file is corrupt..like what? And the sammobile news says if I cant wait, we can flash manualy
Diugan45 said:
Hello guys!
I saw that the OneUI update is rolling out in Russia, I wanted to try it, I downloaded samsung drinvers, odin latest version v3.13.3 and accesed samobile website and downloaded the SER firmware, i opened all 5 files, bl, ap etc in the right field in odin then i went donwload mode but when i pressed start, i got this error re partition failed and on the phone something with the PIT file, then after a day I tried again to download, i waited cca 30 mins, the file says that is 1,1GB then when it was done i wanted to extract and it said that the file is corrupt..like what? And the sammobile news says if I cant wait, we can flash manualy
Click to expand...
Click to collapse
You cant just simply extract a rom zip you need tools to do it thats why you are getting errors when extracting.
Did you go into developer options and enable OEM unlock and usb debugging??
garylawwd said:
You cant just simply extract a rom zip you need tools to do it thats why you are getting errors when extracting.
Did you go into developer options and enable OEM unlock and usb debugging??
Click to expand...
Click to collapse
the firmware which I downloaded from sammobile contains ap bl csc home files that are needed in the Odin fields? how should I upload the zip in the Odin? I cant.
Diugan45 said:
the firmware which I downloaded from sammobile contains ap bl csc home files that are needed in the Odin fields? how should I upload the zip in the Odin? I cant.
Click to expand...
Click to collapse
Do what I said in my last post. Check the ap BL CSC checkboxes in Odin and choose the file from sammobile to flash