hey,
i've updatet my note with odin 1.85 and the firmware "N7000XXKK9_N7000OXAKK9_N7000XXKK5_HOME.tar.md5".
My problem is that my note has no screen any more. I hear the sound im able to unlock my screen (without seeing it) but there are only the sounds of my note. I've flashed a second time (not easy to get to the note to the download mode without seeing anything.
So what can I do now?
My note was rooted first also by using odin and the CF-Root-SGN_XX_DBT_KK9-v5.0-CWM5.zip
have you any idea what I could try now?
greetings flo
From your description, you did everything right. But you may get a corrupted file. Download the same file again from the below source. (You will lose your root access, but I'm sure you won't mind re-root it later).
Here are the steps I did to make my Galaxy Note GT-N7000 work after a scary day:
I found a place to download firmware at:http://fus.nanzen.se/
just in case you can't see the link: h**p://fus(dot)nanzen(dot)se/
(from Hoffighter's posting) http://forum.xda-developers.com/show....php?t=1350960
I downloaded Fus Check Downloader 2.1 and downloaded Firmware N7000XXKK9 (for Germany). It will automatically decode the .enc2 file to.zip file
I extracted the .zip file generated from decoding file to a folder and I got
"N7000XXKK9_N7000OXAKK9_N7000XXKK5_HOME.tar.md 5" file.
I downloaded Odin3 1.85 (search "odin3 1.85" in XDA Dev forum)
opened Odin3 1.85, attach the file .md5 to the PDA field on Odin.
I went to download mode on mt G-Note (Power + home + Volume down)
and click start. It took about 6 to 7 minutes to do the flashing.
Just remember to put the .tar or .md5 file in PDA only..
my display is back
yappoe said:
From your description, you did everything right. But you may get a corrupted file. Download the same file again from the below source. (You will lose your root access, but I'm sure you won't mind re-root it later).
Here are the steps I did to make my Galaxy Note GT-N7000 work after a scary day:
I found a place to download firmware at:http://fus.nanzen.se/
just in case you can't see the link: h**p://fus(dot)nanzen(dot)se/
(from Hoffighter's posting) http://forum.xda-developers.com/show....php?t=1350960
I downloaded Fus Check Downloader 2.1 and downloaded Firmware N7000XXKK9 (for Germany). It will automatically decode the .enc2 file to.zip file
I extracted the .zip file generated from decoding file to a folder and I got
"N7000XXKK9_N7000OXAKK9_N7000XXKK5_HOME.tar.md 5" file.
I downloaded Odin3 1.85 (search "odin3 1.85" in XDA Dev forum)
opened Odin3 1.85, attach the file .md5 to the PDA field on Odin.
I went to download mode on mt G-Note (Power + home + Volume down)
and click start. It took about 6 to 7 minutes to do the flashing.
Just remember to put the .tar or .md5 file in PDA only..
Click to expand...
Click to collapse
Thanks for your post I tried it 3 times but it won't work. The screen was still black.
now what I did:
I downloaded the files from here: http://www.samsdroid.com/2011/11/samsung-galaxy-note-n7000-flashing.html
I did it like they subscribe step by step
** Open Odin3 v1.85 software
** Check Re-Partition, Auto Reboot, and F. Reset Time options.
** Check and select .pit file ( looks like Q1_20110914_16GB.pit )
** Check and select PDA file ( Looks like CODE_N7000xxxxx_CL627135_REV02_user_low_ship.tar.md5 )
** Check and select Phone file ( Looks like MODEM_N7000xxxxx_REV_05_CL1067428.tar.md5 )
** Check and select CSC file ( looks like GT-N7000-MULTI-CSC-Oxxxxx.tar.md5 )
after the first reboot my display shows an error by receiving the tar files.
I did the same procedure a second time and my sgn retourned with Kernel 2.3.5.
Im happy now that my sgn is back!
thanks a lot
Related
After some problems to get Kies to recognize my SGT7 rom after custom rom tour i solved it like this.
Get the software CheckFusDownloader v2.1
Download at fus.nanzen.se
Open and choose: android, GT-P1000 and your region.
Then press firmware check and download.
You'll get a zip file, unpack the .zip and put the .tar file in a easy to remember place.
Flash the Restock Package from TeamOvercome (use odin v1.7 supplied in the .zip)
Download at teamovercome.net/
(Use Re-Partition, Auto Reboot and F.Reset Time)
Then do factory reset/wipe in recovery mode. (Power + Volume up at boot)
Then flash the .tar file you downloaded with CheckFusDownloader v2.1
NO re-partition, just klick PDA and choose the downloaded .tar file, and flash.
Then again factory reset/wipe.
Then flash the Restock Package again with and factory reset/wipe at boot
After that Kies recognise my SGT7 as original Samsung rom.
Can somebody tell me if there is a easier way?
I hex edited /efs/nv_data.bin, and flashed a Froyo ROM which included the CSC with the right country code. Kies recognised my Tab straight away and updated it to GB 2.3.6 successfully. See my more detailed post in the other thread (help me i have only 2 weeks left on my garanti!).
I'm not sure it's an easier way though.
Here is a complete guide to Flash ROMs -
Download ODIN Multidownloader 4.43. Link: Download
After it has downloaded, extract it anywhere u want (i suggest desktop, easier)
RUN ODIN.
Power off your phone.
Put your phone into downloading mode. Hold together: Power+Volume Down+Home (phone boots to Downloading mode)
Connect your phone to PC via USB cable.
Wait for the drivers to install. After that, in ODIN, one of the top line “bars” should turn yellow and some text should appear there.
Download the AriesVE.ops file and check it as OPS. Link to download (attached, scroll down the first post, credits goes to manveru0): Download From XDA Developers
Then check the ‘one package’ from the top left
The ROM you’ve downloaded, check it as one package. If it’s MD5 file. Then click flash.
Flashing will take about 9 minutes.
When you see “Close serial port and wait until rebooting” in odin, you can unplug your phone.
Enjoy!
— If the flashing doesn’t complete. Or you face some other problems, just try another USB port, or computer if possible.
----------- Source : The Samsung Galaxy S Plus.tk
What do you think ?
meh.
It's by no means complete at all.
I don't think the galaxy s plus is the same as the i9000.
This reads like upgrading firmware because its ODIN. Custom ROMS require root and a recovery module.
What is an ops file? Your links are for downloads and don't point to the original context or user's post.
.ops file contains informations about partitions for Odin (probably for prevent flashing to wrong partition).
nyloncrack said:
meh.
It's by no means complete at all.
I don't think the galaxy s plus is the same as the i9000.
This reads like upgrading firmware because its ODIN. Custom ROMS require root and a recovery module.
What is an ops file? Your links are for downloads and don't point to the original context or user's post.
Click to expand...
Click to collapse
Well, I meant this post for Galaxy S plus and also the links are from site : www(.)thegalaxysplus.tk
So if this is imcomplete plz forgive me ! :-(
How do I install stock rom on I9000 ? Country - India
I downloaded I9000DDJVB_I9000ODDJVB_INU.zip ( Android 2.3.3 March 2012 ) file from samfirmware .
After I extract it i get JVB_JVB_JV7.tar and SS_DL.dll file .
How do I install these files . There are no tutorials available for .tar file . Only .tar.md5 and one with 3 files methods are available .
BTW I am currently on CM9 RC2
Help Please .
Thank You .
Read the sticky notes
Sent from my GT-I9000 using xda premium
Flash with samsung software
First of all you do not need do unzip the file you have downloaded.
Get Samsung Kies at this address, then put your phone into download mode and connect. And follow the screen.
samsung.com/us/kies
Note to enter into download mode:
- Put the phone OFF
- Hold Power+Volume_Down+Home together
- Connect USB Cable
On the other hand you can find the tutorial about the software named ODIN. That could also help. Do this only if you don't have any other way.
Everybody's gotta start somewhere. This is the guide on how to install the stock leaked 4.1.2 JB ROM for the Galaxy S2 I9100.
1. You'll need the following files:
Odin:
http://forum.xda-developers.com/showthread.php?t=1703998
The Samsung USB Drivers:
http://drivers.softpedia.com/get/MOBILES/Samsung/SAMSUNG-USB-Driver-for-Mobile-Phones-15150.shtml
And last but not least, the files to flash:
Torrent: magnet:?xt=urn:btih:9C907CAFC986005720D2A038A49350 AA948542BB&dn=4.1.2%20JB&tr=udp%3a%2f%2ftracker.cc c.de%3a80%2fannounce
Download all the files and move all of them to a folder to avoid confusion.
2. Install the USB drivers unless you already got them installed.
3. You will only need the following files, you may delete the other files to avoid any possible confusion:
CODE_I9100XXLSJ.tar.part1.rar
CODE_I9100XXLSJ.tar.part2.rar
CSC_HOME_OXX_I9100OXXLS1.tar.md5
MODEM_I9100XXLS6.tar.md5
Odin3_v3.04.zip
4. Now extract Odin to the folder where you got your files.
5. Moving on, extract "CODE_I9100XXLSJ.tar.part1.rar". This process will extract "CODE_I9100XXLSJ.tar.md5" from both the part1 and part2 archives to your folder.
6. Remove the MD5 extension from the following files:
CODE_I9100XXLSJ.tar.md5
CSC_HOME_OXX_I9100OXXLS1.rar.md5
MODEM_I9100XXLS6.tar.md5
7. Put your phone in download mode and plug in your USB-cable. (turn of your phone, then press and hold the volume-down, home and power).
8. Now run Odin as administrator (Odin3 v3.04.exe). One of the rectangular boxes under ID:COM should be yellow now which means your device is ready to be flashed.
9. Make sure Re-Partition is unchecked, Auto Reboot is checked, F. Reset Time is checked, and Flash Lock is unchecked.
10.
Press "PDA" and select the "CODE_I9100XXLSJ.tar file".
Press "Phone" and select the MODEM_I9100XXLS6.tar file".
Press "CSC" and select the CSC_HOME_OXX_I9100OXXLS1.tar file".
11. Hit the ‘Start’ button. Now pray to the smartphone gods and wait patiently for the process to finish. Do not unplug your phone, unless you want to brick it. You may close Odin when your phone is rebooting.
Enjoy your update.
Screenshots attached.
Etherezz said:
Everybody's gotta start somewhere. This is the guide on how to install the stock leaked 4.1.2 JB ROM for the Galaxy S2 I9100.
1. You'll need the following files:
Odin:
http://forum.xda-developers.com/showthread.php?t=1703998
The Samsung USB Drivers:
http://drivers.softpedia.com/get/MOBILES/Samsung/SAMSUNG-USB-Driver-for-Mobile-Phones-15150.shtml
And last but not least, the files to flash:
Torrent: magnet:?xt=urn:btih:9C907CAFC986005720D2A038A49350 AA948542BB&dn=4.1.2%20JB&tr=udp%3a%2f%2ftracker.cc c.de%3a80%2fannounce
Download all the files and move all of them to a folder to avoid confusion.
2. Install the USB drivers unless you already got them installed.
3. You will only need the following files, you may delete the other files to avoid any possible confusion:
CODE_I9100XXLSJ.tar.part1.rar
CODE_I9100XXLSJ.tar.part2.rar
CSC_HOME_OXX_I9100OXXLS1.tar.md5
MODEM_I9100XXLS6.tar.md5
Odin3_v3.04.zip
4. Now extract Odin to the folder where you got your files.
5. Moving on, extract "CODE_I9100XXLSJ.tar.part1.rar". This process will extract "CODE_I9100XXLSJ.tar.md5" from both the part1 and part2 archives to your folder.
6. Remove the MD5 extension from the following files:
CODE_I9100XXLSJ.tar.md5
CSC_HOME_OXX_I9100OXXLS1.rar.md5
MODEM_I9100XXLS6.tar.md5
7. Put your phone in download mode and plug in your USB-cable. (turn of your phone, then press and hold the volume-down, home and power).
8. Now run Odin as administrator (Odin3 v3.04.exe). One of the rectangular boxes under ID:COM should be yellow now which means your device is ready to be flashed.
9. Make sure Re-Partition is unchecked, Auto Reboot is checked, F. Reset Time is checked, and Flash Lock is unchecked.
10.
Press "PDA" and select the "CODE_I9100XXLSJ.tar file".
Press "Phone" and select the MODEM_I9100XXLS6.tar file".
Press "CSC" and select the CSC_HOME_OXX_I9100OXXLS1.tar file".
11. Hit the ‘Start’ button. Now pray to the smartphone gods and wait patiently for the process to finish. Do not unplug your phone, unless you want to brick it. You may close Odin when your phone is rebooting.
Enjoy your update.
Screenshots attached.
Click to expand...
Click to collapse
Thanks for this TUT! But is this the Original Firmware from Samsung? Would it work on our local version of i9100 (Philippines) or just for international version?
juapao said:
Thanks for this TUT! But is this the Original Firmware from Samsung? Would it work on our local version of i9100 (Philippines) or just for international version?
Click to expand...
Click to collapse
Our sgs2 in the Philippines is the international version since it is the i9100.
Sent from my GT-I9100 using xda premium
Hi,
I had used the Odin Mobile and the original UK JB 4.1.2 from SamFirmware, and I preserved the root.
All what I need to reinstall was the CWM.
Working excelent from almost a month.
Sent from my GT-N8000 using xda premium
Can it get better than this??
Does it requires rooting?
am new to this, just want to confirm if device requires a root before following the steps. or i can simply go ahead and install JB rom on top of my stock ICS rom ?
androidGennie said:
am new to this, just want to confirm if device requires a root before following the steps. or i can simply go ahead and install JB rom on top of my stock ICS rom ?
Click to expand...
Click to collapse
no need for rooting. just flash it
About to do a warranty on my Galaxy Note 3 for VZW but I had it rooted with kingo and safetrap installed I removed safetrap and wanted to know what else I need to look and do to ensure that is back to stock and not recognized as modified as well as where do I go to determined everything is ok onces all is done. Appreciate the help:silly:
Wrote this previously for another post, but once you flash the .tar file, you'd be pretty much as stock as stock can be:
-------------------------------
I used Odin v3.09
Downloaded the .zip file in az_biker's post here:
http://forum.xda-developers.com/show....php?t=2543386
Extracted the .zip file to get the .tar file
Opened Odin.
Click the AP button.
Browsed to folder containing .tar file and clicked Start.
Sit back and let it do it's thing.
When it's done, you've updated your phone to JE
hctimin said:
Wrote this previously for another post, but once you flash the .tar file, you'd be pretty much as stock as stock can be:
-------------------------------
I used Odin v3.09
Downloaded the .zip file in az_biker's post here:
http://forum.xda-developers.com/show....php?t=2543386
Extracted the .zip file to get the .tar file
Opened Odin.
Click the AP button.
Browsed to folder containing .tar file and clicked Start.
Sit back and let it do it's thing.
When it's done, you've updated your phone to JE
Click to expand...
Click to collapse
So as long as on download mode shows Knox 0x0 I'm good right?
Jun1orV said:
So as long as on download mode shows Knox 0x0 I'm good right?
Click to expand...
Click to collapse
Correct. Also make sure that it says samsung official firmware, which is will if you are successful.
♢NoteIII♢
Thanks everything was succeful