Hi;
When i try to open settings it says "settings has stopped" and force closing.
I tried QS's TW based OG4 , OH3 rom
tried alexndr POF3 rom,
tried Aryamod POF3,
tried Audax TW rom.
tried audax kernel, civz kernel, arter97 kernel and stock one.
It happens all the 5.0 base TW roms.
I tried Aurora Note 4 Port never happen.
I opened in safe mode, the same issue !
I'm waiting for your helps
Thanks in advance..
plus
i scanned eset, avast, antivir and malwarebytes. No threat found.
What is the phone's model #? Just curious if this happen on stock ROM.
eqxteh said:
Hi;
When i try to open settings it says "settings has stopped" and force closing.
I tried QS's TW based OG4 , OH3 rom
tried alexndr POF3 rom,
tried Aryamod POF3,
tried Audax TW rom.
tried audax kernel, civz kernel, arter97 kernel and stock one.
It happens all the 5.0 base TW roms.
I tried Aurora Note 4 Port never happen.
I opened in safe mode, the same issue !
I'm waiting for your helps
Thanks in advance..
Click to expand...
Click to collapse
I assume you did a factory reset between the roms you tried?
Sent from my SM-N9005 using Tapatalk
@audit13 n9005 lte @celderic yes sure. Today i made mega wipe including my datas and installed full stock from sammobile when i reinstall my apps with titanium backup it happened again.
Does the stock ROM work without restoring any apps?
Yes it work. After restoring my apps hours days or weeks later it occurs. İ suspect some apps which i installed on internet, non google play. ?
I flashed stock through odin and install just google play s app some minutes later it happened again.
But it just 5.0 stock based roms issue for me.
Totally weird !
Yes, it is totally weird that this would happen.
Have you tried flashing stock ROM with a pit file? Not sure if this would make a difference.
Yes i tried. Not that happened on Note 4 port rom. I'm gonna try with temasek's aosp now.
But first time i face this kind of error. Note 3 phone with note 3 base error.
I also pull out my sd card, re install all apps from google play (not titanium backup).
Are there any app or xposed module to show the background whats going on or is there any app conflict to settings ? Because i made mega wipe and install QS 'S note 3 base rom and installed all google play apps and 1 day after this morning when i push to settings it says settings has stopped again...
Related
I recently flashed the temasek and official CM11 roms, but the baseband has been unknown since.
So I had flash back to the original rom that I was using, my QUESTION is that I like cm11 alot, so how can i fix this problem?
Which Note model? -- N9005 or N9005 variant? -
T/w8 ?
Which recovery do you use?
radicalisto said:
Which Note model? -- N9005 or N9005 variant? -
T/w8 ?
Which recovery do you use?
Click to expand...
Click to collapse
It is actually N9006 but temasek's v45 for n9005 and earlier worked fine, I am using CWM rec.
Until recently, temasek's v46 and 47, the baseband becomes unknown
Last time a user had that issue, he fixed it by flashing stock via odin and then CM but he was using a n9005 so I am not sure if that will work for you as well...However no harm in trying.
Sent From My SM-N9005 To All You Wonder Nobodies!!
Khizar said:
Last time a user had that issue, he fixed it by flashing stock via odin and then CM but he was using a n9005 so I am not sure if that will work for you as well...However no harm in trying.
Sent From My SM-N9005 To All You Wonder Nobodies!!
Click to expand...
Click to collapse
I'm sorry but I speak poor English. What is a Stock? I've tried flashing kernel and baseband but it did not work.
When I use Temasek's v45, it shows that my baseband is ML1, but when I use further version, it becomes unknown.
Stock is your original Samsung ROM
Sent from my CM11 Kitkat powered N9005
radicalisto said:
Stock is your original Samsung ROM
Sent from my CM11 Kitkat powered N9005
Click to expand...
Click to collapse
ok i see, i tought it was sth like baseband or kernel or sth else.
I just flashed a n9006 rom made by chinese romers to get my note mp4 into a note3, or i could just use temasek's v45.
I just wanna use the latest cm11 rom but it seems that it's not quite possible for now, so i'll just stick to my original rom...
radicalisto said:
Stock is your original Samsung ROM
Sent from my CM11 Kitkat powered N9005
Click to expand...
Click to collapse
are there kernels and basebands that don't match, i mean they just don't work when put together?
I actually got to a similar problem, after some cyanogenmod update I suddenly got no cellular service at all signal strength stuck on -120db and its stuck on searching for service, flashing older versions, wipes, all did nothing
qlum said:
I actually got to a similar problem, after some cyanogenmod update I suddenly got no cellular service at all signal strength stuck on -120db and its stuck on searching for service, flashing older versions, wipes, all did nothing
Click to expand...
Click to collapse
We have probably same issue
Aditmac1 said:
We have probably same issue
Click to expand...
Click to collapse
I am going to try flashing back to stock tonight, I will report back if it works.
qlum said:
I am going to try flashing back to stock tonight, I will report back if it works.
Click to expand...
Click to collapse
it worked for me though
It also worked for me although sadly I could not use my backup again after flashing back to cyanogenemod so its time to start downloading. At least my phone is fully functional now, even if I lost a bit of data.
I had the same issue move than once, i would lose imei number etc.
Found out that it wasn't prompting for pin unlock on boot.
Since removing this I've had no problems
Yea it also wasn't prompting for ping with mine.
Though starting again fresh does work, I am currently again on the latest nightlies. however if this happens again I will probably wait for a stable release because having to reinstall everything is not really desirable.
qlum said:
Yea it also wasn't prompting for ping with mine.
Though starting again fresh does work, I am currently again on the latest nightlies. however if this happens again I will probably wait for a stable release because having to reinstall everything is not really desirable.
Click to expand...
Click to collapse
it is rather annoying to reinstall everything,even with kies
I didn't even use kies nor any other tool like that.
Hi everyone
I root my n9005 and flash x-note 13 and it was a good rom ...then I want to try cyanogenmod rom so I flashed cm11 snapshot then I faced a problem with whatsapp which works great while using cm11 rom but when I go back to x-note 13 rom the app wont be able to download media ....
so any suggestion ..
Follow the sdcard fix guide that is linked in my sig....
Sent From My SM-N9005 To All You Wonder Nobodies!!
that was quick ... thaaaanks alot my friend it works with simple steps..
but could you explain the reason why AOSP conflict with sammy any ideas ... also did I have to do this fix every time I switch between the sammy and AOSP
badersksk said:
that was quick ... thaaaanks alot my friend it works with simple steps..
but could you explain the reason why AOSP conflict with sammy any ideas ... also did I have to do this fix every time I switch between the sammy and AOSP
Click to expand...
Click to collapse
Yes you must do this every time. It's either do this or flash stock tw FW via Odin. And AFAIK this happens due to the recovery not restoring data/media correctly.
Sent From My SM-N9005 To All You Wonder Nobodies!!
thanks ... I hope this will end with the next builds
I'm trying to install a custom rom onto my ATT Galaxy S4. I have Safestrap installed and I can boot to the recovery.
I've tried putting BeanStalk on it and it shows the "SafeStrap Enabled" and then shuts off. So then I did some more searching and put ProjectChaos on it. It'll boot to the custom bootlogo that I've chosen and it just stays there. It won't go past that.
I don't exactly know what I'm doing wrong here...
Can anyone give me any insight?
Bbychaos said:
I'm trying to install a custom rom onto my ATT Galaxy S4. I have Safestrap installed and I can boot to the recovery.
I've tried putting BeanStalk on it and it shows the "SafeStrap Enabled" and then shuts off. So then I did some more searching and put ProjectChaos on it. It'll boot to the custom bootlogo that I've chosen and it just stays there. It won't go past that.
I don't exactly know what I'm doing wrong here...
Can anyone give me any insight?
Click to expand...
Click to collapse
which firmware are you coming from? Are you flashing the right kernel modules?
Thr33-F0ur said:
which firmware are you coming from? Are you flashing the right kernel modules?
Click to expand...
Click to collapse
I'm on 4.3 trying to get on 4.4
I'm not completely sure about the kernel. I tried 2 different ones with ProjectChaos
http://forum.xda-developers.com/showthread.php?t=2680868
Sent from my SGH-I337 running GPE using Tapatalk
Check this thread out as well please:
http://forum.xda-developers.com/showthread.php?t=2616221
I don't know about ProjectChaos, but thought Beanstalk was CM based. You can't run CM/AOSP roms. Only TW based with TW kernels--
Check out Mapleleaf rom.... it is tw based and runs beautifully with the googy-max kernel....dumb question but you are wiping between rom changes right?
Gage_Hero said:
Check out Mapleleaf rom.... it is tw based and runs beautifully with the googy-max kernel....dumb question but you are wiping between rom changes right?
Click to expand...
Click to collapse
Yes I am.
I'll check out the links. I've been busy so I haven't been able to try anything just yet. I'll report back when I get to mess with it
rugmankc said:
I don't know about ProjectChaos, but thought Beanstalk was CM based. You can't run CM/AOSP roms. Only TW based with TW kernels--
Click to expand...
Click to collapse
I am assuming ProjectChaos is TW, I got it installed and it's running nicely.
The only problem I've had thus far (I just got it installed a few hours ago) is when it boots up it says "com.android.phone" has stopped when it boots up.
I had to go back into SS and Fix Permissions and rewipe cache, etc. because I was having a reboot issue. But that solved that.
Thanks for the help everyone!!
Bbychaos said:
I am assuming ProjectChaos is TW, I got it installed and it's running nicely.
The only problem I've had thus far (I just got it installed a few hours ago) is when it boots up it says "com.android.phone" has stopped when it boots up.
I had to go back into SS and Fix Permissions and rewipe cache, etc. because I was having a reboot issue. But that solved that.
Thanks for the help everyone!!
Click to expand...
Click to collapse
Glad you got it.
Sent From My Samsung Galaxy S4
Hi!
I had a g900x phone. I flashed it with Omega rom, but got stuck in bootloop. I installed other TouchWiz roms and even tried the nandroid restore but I always get stuck in bootloops.
I tried reinstalling the pit with odin, but that did not change anything.
I installed CM11 and the phone booted without issue. I tried other aosp roms and they all worked without issues.
Another weird issues is that when I switch off the phone then plug it, a grey battery appears, except with aosp roms.
Any one knows what is wrong and how I can once more install a stock or TW rom?
Found this http://forum.xda-developers.com/showthread.php?t=2566816
Not the same handset, but will give it a try.
coami said:
Hi!
I had a g900x phone. I flashed it with Omega rom, but got stuck in bootloop. I installed other TouchWiz roms and even tried the nandroid restore but I always get stuck in bootloops.
I tried reinstalling the pit with odin, but that did not change anything.
I installed CM11 and the phone booted without issue. I tried other aosp roms and they all worked without issues.
Another weird issues is that when I switch off the phone then plug it, a grey battery appears, except with aosp roms.
Any one knows what is wrong and how I can once more install a stock or TW rom?
Click to expand...
Click to collapse
I would suggest installing a different kernel.
SM-G900W8, 0x1
I have. But only aosp kernels work. Offical ones and TouchWiz based kernels result in bootloops.
coami said:
I have. But only aosp kernels work. Offical ones and TouchWiz based kernels result in bootloops.
Click to expand...
Click to collapse
Are you using the latest bootloaders and modems?
What actual version do you have 900?
What recovery do you use?
SM-G900W8, 0x1
It is a g900x (demo)
I root with CF-Auto-Root-klte-kltexx-smg900f.tar.md5 using Odin3 v3.09
For recovery philz_touch_6.57.8-klte.tar.md5
I tried:
- the official Samsung rom g900f xef from sammobile http://www.sammobile.com/firmwares/download/37911/G900FXXU1ANJ1_G900FOXX1ANJ1_XEF.zip/ I deleted some files and renamed it ldu900x.tar by following this tutorial http://forum.xda-developers.com/showthread.php?t=2733083
- Omega http://omegadroid.co/samsung-galaxy-s5-g900f/
- the stock version inside Omega
- Samsung Galaxy S5 G900F - Alliance ROM
- Pyrana V0.2 SM-G900F-NJ1 Aroma
And the all end up in bootloops
But aosp
- CM 11 http://download.cyanogenmod.org/?device=klte
- XtreStoLite http://downloadandroidfiles.org/fil...te/XtreStoLite_ROM_v1.2.1_XXU1ANE4-signed.zip
Booted without issue. It also solves they grey battery issue when phone is off and plugged.
One thing that I did notice is that both CM and xtrestolite are 4.4.4 while the others are 4.4.2 Not
ragz said:
I would suggest installing a different kernel.
SM-G900W8, 0x1
Click to expand...
Click to collapse
Sorry, I confused rom and kernel for a moment. You were right, installing a Kernel did work.
Just need to find an official Samsung one since the one I used says "kernel is not seandroid enforcing"
coami said:
Sorry, I confused rom and kernel for a moment. You were right, installing a Kernel did work.
Just need to find an official Samsung one since the one I used says "kernel is not seandroid enforcing"
Click to expand...
Click to collapse
Seandroid not enforcing is normal and no problem, it is booting up right.
SM-G900W8, 0x1
Solved: Bootloops with TouchWiz Roms
Yes but I really do not want to have it. And problem solved:
I downloaded Full-S5-SM-G900F-DUMP.zip from http://forum.xda-developers.com/showthread.php?t=2696410
Took the boot.img and put it in .tar file with Total Commander and problem solved
I was wondering if there is a way to skip track with the volume keys without having Xposed installed because I am using stock rom and framwork get my phone stuck on boot. I am rotted etc so if there is anything I| could flash it would be appreciated.
A custom rom.
All Cyanogenmod roms have this feature.
There's a GPE rom with this feature.
And the TW custom roms might have this feature too. You'll have to ask in the TW custom rom threads.
Other than that, Xposed is the only option.
GDReaper said:
A custom rom.
All Cyanogenmod roms have this feature.
There's a GPE rom with this feature.
And the TW custom roms might have this feature too. You'll have to ask in the TW custom rom threads.
Other than that, Xposed is the only option.
Click to expand...
Click to collapse
I have tried installing 2 custom roms, but always gets stuck in the boot screen. I had no problem flashing my old phone but this one it just doesnt work.
Well, obviously you're doing something wrong.
No im doing a full whipe cache data etc then flashing rom
There must be something else. Does the rom even support your model?
Yeah it does I get it from the i9505 section
Apexpredator12 said:
Yeah it does I get it from the i9505 section
Click to expand...
Click to collapse
What recovery are you using? Give us more info.
GDReaper said:
What recovery are you using? Give us more info.
Click to expand...
Click to collapse
I am using TWRP 2.5.0.0, I created a backup before I flashed the new ROM but when it would get stuck on boot screen with the new ROM I tried to restore the backup but then that also got stuck at boot screen. So reinstalled the stock ROM that fixed it but, still no luck with any ROMS.
Full details
Model: GT-i9505
Version 5.0.1
TWRP: 2.5.0.0
Build number: LRX22.I9505XXUHOB7
try Frinky Music Controller https://play.google.com/store/apps/details?id=frinky.volumeKeys.music.controller&hl=en
supports more than 200 music player including spotify and soundcloud.
Enjoy if it works in your phone