Related
I currently have a brand new Canadian S4 with the MDJ firmware/baseband version.
Most of the roms are MDL based.
Do i have to change the base firmware/baseband to MDL before flashing and MDL rom ?
My goad is to install CleanRom wich is MDL based.
Thanks for the guidance.
Xetalx
Xetalx said:
I currently have a brand new Canadian S4 with the MDJ firmware/baseband version.
Most of the roms are MDL based.
Do i have to change the base firmware/baseband to MDL before flashing and MDL rom ?
My goad is to install CleanRom wich is MDL based.
Thanks for the guidance.
Xetalx
Click to expand...
Click to collapse
You can just flash the ROM. Just make a Nandroid backup first. Some ROM's come with a custom kernel and you may need to flash a Canadian kernel directly after flashing the ROM.
blyndfyre said:
You can just flash the ROM. Just make a Nandroid backup first. Some ROM's come with a custom kernel and you may need to flash a Canadian kernel directly after flashing the ROM.
Click to expand...
Click to collapse
I did get the original Kernel file for my cell provider. It is a TAR file with boot.img into it.
What is the easyest way to apply it after flashing the Rom in TWRP ?
Thanks
Xetalx
TARs are flashed with Odin or Mobile Odin.
Xetalx said:
I did get the original Kernel file for my cell provider. It is a TAR file with boot.img into it.
What is the easyest way to apply it after flashing the Rom in TWRP ?
Thanks
Xetalx
Click to expand...
Click to collapse
If you are flashing the STOCK firmware for your specific carrier it will include the STOCK kernel.
If you are using a custom ROM like Mint Jelly or something, I'd say flash Adam kernel after flashing the ROM. You won't want to flash a STOCK kernel with a custom ROM.
Did you end up updating to MDL?
I also have the MDJ kernel and I installed CleanRom, I now cannot get wifi and TWRP will not boot in recovery mode. I thought it would be easier just to update to MDL to get wifi but mobile Odin did not work.
Thank you
travisobvs said:
Did you end up updating to MDL?
I also have the MDJ kernel and I installed CleanRom, I now cannot get wifi and TWRP will not boot in recovery mode. I thought it would be easier just to update to MDL to get wifi but mobile Odin did not work.
Thank you
Click to expand...
Click to collapse
Regarding wifi on CleanROM, did you check post #2 here?
bo8 said:
Regarding wifi on CleanROM, did you check post #2 here?
Click to expand...
Click to collapse
No I did not,
Truthfully I am a pretty big Noob to all of this and was afraid of changing my kernel to MF3 from MDJ. I really didn't know how that would affect my phone / carrier situation here in Canada. The main problem was that I could not get the phone into recovery mode. Turns out I just needed to re-root the phone. So when I got the phone to actually go into recovery I jumped at the CM Rom. When I find a forum that helps me understand what updating my Kernel does to my phone I will try to update Kernel and go back to CleanRom. I kind of miss multiwindow.... maybe a little bit of Touchwiz...
Thanks for the reply!
EDIT : I also found this : http://www.scottsroms.com/downloads.php?do=file&id=421 which is a version of CleanROM made for the MDJ but it is dated further back which threw me for a loop too.
travisobvs said:
No I did not,
Truthfully I am a pretty big Noob to all of this and was afraid of changing my kernel to MF3 from MDJ. I really didn't know how that would affect my phone / carrier situation here in Canada. The main problem was that I could not get the phone into recovery mode. Turns out I just needed to re-root the phone. So when I got the phone to actually go into recovery I jumped at the CM Rom. When I find a forum that helps me understand what updating my Kernel does to my phone I will try to update Kernel and go back to CleanRom. I kind of miss multiwindow.... maybe a little bit of Touchwiz...
Thanks for the reply!
EDIT : I also found this : http://www.scottsroms.com/downloads.php?do=file&id=421 which is a version of CleanROM made for the MDJ but it is dated further back which threw me for a loop too.
Click to expand...
Click to collapse
No worries and you're very welcome! Don't sweat, I'm still on stock ROM because I'm hesitant to make the ROM dive. Don't know how or if installing MF3 kernel via custom ROM would affect the phone in terms of rooting or custom recovery either. I'd probably be sticking with MDJ build if possible.
You and me both on multiwindow! Helps a ton when it comes to referencing something while emailing/texting! I'd miss the TW camera as well ... maybe. haha
Which version of TWRP are you on? Version 2.6 has an often-experienced issue where it just hangs at the "teamwin" splash screen. Downgrading to 2.5.0.2 resolves that.
Any updates?
bo8 said:
No worries and you're very welcome! Don't sweat, I'm still on stock ROM because I'm hesitant to make the ROM dive. Don't know how or if installing MF3 kernel via custom ROM would affect the phone in terms of rooting or custom recovery either. I'd probably be sticking with MDJ build if possible.
You and me both on multiwindow! Helps a ton when it comes to referencing something while emailing/texting! I'd miss the TW camera as well ... maybe. haha
Which version of TWRP are you on? Version 2.6 has an often-experienced issue where it just hangs at the "teamwin" splash screen. Downgrading to 2.5.0.2 resolves that.
Click to expand...
Click to collapse
Hey guys,
I am also a 1337m Rogers S4 (MDJ) owner, also a noob as well. I managed to flash my phone with CM and had a pretty good AOSP experience and learned a little bit on the way. I can legitimately say that I miss a couple thing about stock / Touch wiz, mainly the multiwindow support and camera. Cyanogenmod is also acting up and drains battery pretty bad when I am roaming in the states.
What did you guys end up doing? Did you update your base-band to mdk and install CleanRom? Right now that looks like it's my goal but I truthfully have no idea how to do it.
Did you guys go back to stock after changing? Do I just find a stock ROM on the forum and use ODIN to bring it back?
Is switching roms as easy as choosing something in Goo manager or do you need to go into a recovery in recovery mode?
Thank you!
I installed safestrap 3.6 as explained in http://forum.xda-developers.com/showthread.php?t=2448942
Everything worked fine, created a new slot with 3Gbyte size. However, I could ntot get custom ROM installed there. I copied ROM .zip file (CARBON-JB-1.8-jflteatt.zip) to internal SD card + gapps -jb-20130813-signed.zip. Got "installation completed" message for both ZIPs, and then :
Updating partition details...
E: Unable to mount internal storage. Got green "Successful" message under the window where all log messages were running.
Then when rebooting with newly-flashed ROM slot, the phone does not boot, it is stuck with back screen and the only way to get it back to life is to power-cycle it and boot into stock ROM slot.
Any idea what went wrong?
Phone details:
Model: SAMSUNG-SGH-I337
Android 4.2.2
Baseband version - I337UCUAMF3
Kernel version 3.4.0-812098
Thanks,
Carbon is not tw based. Only touch wiz based roms will work.
I think the only aosp ROM that works is GPE 4.2.2 try that. But check its compatibility first
Sent from my Samsung Galaxy S4 (SGH-i337) via Tapatalk 4
all the google edition roms work with safestrap as far as I know, I've tested most of them. if it's one from another carrier the most you have to change are the apn settings. I'll be testing VirginROM later.
http://forum.xda-developers.com/showthread.php?t=2341376
http://forum.xda-developers.com/showthread.php?t=2356276
Just to be clear for OP
Google Edition (GE) roms are Touch Wiz---
Did not manage to turn WiFi on
deadenz said:
all the google edition roms work with safestrap as far as I know, I've tested most of them. if it's one from another carrier the most you have to change are the apn settings. I'll be testing VirginROM later.
http://forum.xda-developers.com/showthread.php?t=2341376
http://forum.xda-developers.com/showthread.php?t=2356276
Click to expand...
Click to collapse
thanks for the reply.
Tried ge4.2.2clean-20130907.zip, but it did not manage to turn WiFi during sign-in process.
Tried ge4.3clean-20130907.zip, this one did not boot at all.
Any tip? thanks
michaelkagan said:
thanks for the reply.
Tried ge4.2.2clean-20130907.zip, but it did not manage to turn WiFi during sign-in process.
Tried ge4.3clean-20130907.zip, this one did not boot at all.
Any tip? thanks
Click to expand...
Click to collapse
on the first boot of installing any rom, I always skip the initial setup. wait until the rom has booted first then add your google account and setup wifi and 4.3 roms are not compatible with safestrap
If you want a good GE 4.3 ROM, try this one:
http://forum.xda-developers.com/showthread.php?t=2395030
That's what I use as my daily driver. It works great, and is an untouched 4.3 GE ROM, except for the kernel. You can customize it yourself if you want before you install it.
chocodough said:
If you want a good GE 4.3 ROM, try this one:
http://forum.xda-developers.com/showthread.php?t=2395030
That's what I use as my daily driver. It works great, and is an untouched 4.3 GE ROM, except for the kernel. You can customize it yourself if you want before you install it.
Click to expand...
Click to collapse
4.3 roms don't work with safestrap.
It's been my understanding GE ones are TW based--
Got that from playing with KT's kernels
Maybe I am wrong--
rugmankc said:
It's been my understanding GE ones are TW based--
Got that from playing with KT's kernels
Maybe I am wrong--
Click to expand...
Click to collapse
Pretty sure you are right, I haven't installed a GE rom that hasn't worked yet
deadenz said:
Pretty sure you are right, I haven't installed a GE rom that hasn't worked yet
Click to expand...
Click to collapse
Currently only TouchWiz and GE 4.2.2 roms work. I tried GE 4.3 and it wouldn't turn on. Hopefully within the next week at&t treats us with a cookie and release 4.3 update.
DrXTC said:
Currently only TouchWiz and GE 4.2.2 roms work. I tried GE 4.3 and it wouldn't turn on. Hopefully within the next week at&t treats us with a cookie and release 4.3 update.
Click to expand...
Click to collapse
That's good info, didn't think about it stopping with 4.2.2--
chocodough said:
If you want a good GE 4.3 ROM, try this one:
http://forum.xda-developers.com/showthread.php?t=2395030
That's what I use as my daily driver. It works great, and is an untouched 4.3 GE ROM, except for the kernel. You can customize it yourself if you want before you install it.
Click to expand...
Click to collapse
It seems like this is ROM for i9505, my phone is i9500. WIll it work?
thanks,
Still could not make wifi work
deadenz said:
on the first boot of installing any rom, I always skip the initial setup. wait until the rom has booted first then add your google account and setup wifi and 4.3 roms are not compatible with safestrap
Click to expand...
Click to collapse
Tried to skip initial setup, but still WiFi would not turn on. Tried with ge4.2.2clean-20130907.zip
Any hint?
michaelkagan said:
Tried to skip initial setup, but still WiFi would not turn on. Tried with ge4.2.2clean-20130907.zip
Any hint?
Click to expand...
Click to collapse
did you flash the mf3 kernel module after you installed the rom?
You might get a lot more help here
Official AT&T S4 Safestrap Discussion Q/A
deadenz said:
did you flash the mf3 kernel module after you installed the rom?
Click to expand...
Click to collapse
No, I did not flash kernel, just installed ROM. SHould I flash kernel?
michaelkagan said:
No, I did not flash kernel, just installed ROM. SHould I flash kernel?
Click to expand...
Click to collapse
no. you should stop everything that you're doing and READ before you do anything else
http://forum.xda-developers.com/showthread.php?t=2428254
http://forum.xda-developers.com/showthread.php?t=2448925
http://blog.hash-of-codes.com/how-to-safestrap/
deadenz said:
no. you should stop everything that you're doing and READ before you do anything else
http://forum.xda-developers.com/showthread.php?t=2428254
http://forum.xda-developers.com/showthread.php?t=2448925
http://blog.hash-of-codes.com/how-to-safestrap/
Click to expand...
Click to collapse
thanks for the pointers.
hey guys, how do i root a galaxy s4 (SGH-I337M) from rogers running 4.3 MK6?
Try cf auto root suppose to work
http://forum.xda-developers.com/showthread.php?t=2293800
zild8 said:
Try cf auto root suppose to work
http://forum.xda-developers.com/showthread.php?t=2293800
Click to expand...
Click to collapse
thanks bro it worked, which rom are you on n can u send me the link also or do the at&t roms work as well?
i use omega v15 for now and i love it ,they just release v 16,i always flash rom from i9505,dont use i9500 rom its different
http://forum.xda-developers.com/showthread.php?t=2253528
You also will need to flash a recovery like this one
http://forum.xda-developers.com/showthread.php?t=2322682
Dont use the loky version its for att
zild8 said:
i use omega v15 for now and i love it ,they just release v 16,i always flash rom from i9505,dont use i9500 rom its different
http://forum.xda-developers.com/showthread.php?t=2253528
You also will need to flash a recovery like this one
http://forum.xda-developers.com/showthread.php?t=2322682
Dont use the loky version its for att
Click to expand...
Click to collapse
What's a good lightweight, no bloat TW rom? I noticed Omega has a lot of additional features, which I would never use like the Xposed framework.
I was thinking of going with Goldeneye, but not sure if it has been updated to support I337M again.
WarbyParker said:
What's a good lightweight, no bloat TW rom? I noticed Omega has a lot of additional features, which I would never use like the Xposed framework.
I was thinking of going with Goldeneye, but not sure if it has been updated to support I337M again.
Click to expand...
Click to collapse
same here ..
you should try xposed framework ,and wanam xposed .There a lot of xposed module and i can costumize touchwiz like i want,like maximize widget,wich allow me to click on a notification without having to unlock.For shure its a personnal choice.
But in omega you can choose the app that you want ,if you dont want xposed just unselect it ,it use aroma installer when you flash it,you can remove a lot of apps
dajj said:
same here ..
Click to expand...
Click to collapse
Goldeneye never lost compatibility with our phones, so not sure what kind of support you expect or require.? IB4STiD simply requested not to complain from Canadian side for known problems, like lack of 4.3 modem for our phone, which we now got.
Simply flash Canadian compatible third party kernel, (one without knox) after flashing goldeneye, that's it.
Sent from my SGH-I337M
Idan73 said:
Goldeneye never lost compatibility with our phones, so
Simply flash Canadian compatible third party kernel, (one without knox) after flashing goldeneye, that's it.
Click to expand...
Click to collapse
Could you add the kernel link.
Thank you a lot.
EDIT: Do you mean the kernel in step 6 in this post: http://forum.xda-developers.com/showpost.php?p=47819176&postcount=9322
It's in GE thread, first post, Canadian fix. Guess iB4STiD opened it up for us again.
But basically go to original development and whichever tw kernel you pick, follow the links to Canadian or T-Mobile compatible version. Kernel makers usually describe whether we have our own or we should use T-Mobile one
Sent from my SGH-I337M
zild8 said:
i use omega v15 for now and i love it ,they just release v 16,i always flash rom from i9505,dont use i9500 rom its different
http://forum.xda-developers.com/showthread.php?t=2253528
You also will need to flash a recovery like this one
http://forum.xda-developers.com/showthread.php?t=2322682
Dont use the loky version its for att
Click to expand...
Click to collapse
So, as I understand, we absolutely need this Advanced CWM recovery if we are running MK6.
We can't use standard CWM or TWRP recovery?
Bleedos said:
So, as I understand, we absolutely need this Advanced CWM recovery if we are running MK6.
We can't use standard CWM or TWRP recovery?
Click to expand...
Click to collapse
From what I gather, we can use CWM or TWRP, it just blows the Knox counter and warranty is void. Which is why cf-auto-root can still root, and why u can just throw rom manager on to install cwm (then remove, dont install roms with rom manager). This is only for MK6 (rogers/canadian). I would try a cwm or twrp, and just use cf-auto root to reinstall the stock recovery with odin if you run into problems.
.
dajj said:
Could you add the kernel link.
Thank you a lot.
EDIT: Do you mean the kernel in step 6 in this post: http://forum.xda-developers.com/showpost.php?p=47819176&postcount=9322
Click to expand...
Click to collapse
This is only relevant for GE versions 13/14. The latest is GE15. As already explained, just follow steps in 1st post. There is a section called 'Canadian install guide', can't miss it. The fix you flash after the rom is the kernel for our baseband (Step A). Easy as pie. Step B is optional, changes network icons from default to whatever your carrier uses (e.g., 4G to LTE).
I would recommend creating a backup of stock once rooted before flashing custom roms. Not sure if there's ever going to be a fix for resetting knox, but traditionally it was a good idea to have this in case you ever want to revert back to stock and unroot. Also backup EFS to be safe, for more info: http://forum.xda-developers.com/showthread.php?t=1308546. I personally had to use an app for that after updating, knox kept preventing me from connecting to the program but that was when OTA was launched, might work for you.
azuziel said:
From what I gather, we can use CWM or TWRP, it just blows the Knox counter and warranty is void. Which is why cf-auto-root can still root, and why u can just throw rom manager on to install cwm (then remove, dont install roms with rom manager). This is only for MK6 (rogers/canadian). I would try a cwm or twrp, and just use cf-auto root to reinstall the stock recovery with odin if you run into problems.
.
Click to expand...
Click to collapse
FYI I did it the easy way using the Cyanogen Installer.
Ended with CM10.2 and CWM 6.0.4.4.
Then I flashed CWM Touch 6.0.4.4 from CWM. Downloaded TWRP but did not try it.
mafioso345 said:
thanks bro it worked, which rom are you on n can u send me the link also or do the at&t roms work as well?
Click to expand...
Click to collapse
Chaeck out this ROM. Nice and light. Quick with great battery.
http://forum.xda-developers.com/showthread.php?t=2537495
help me modify my galaxy s4 to make it work on wind
zild8 said:
i use omega v15 for now and i love it ,they just release v 16,i always flash rom from i9505,dont use i9500 rom its different
http://forum.xda-developers.com/showthread.php?t=2253528
You also will need to flash a recovery like this one
http://forum.xda-developers.com/showthread.php?t=2322682
Dont use the loky version its for att
Click to expand...
Click to collapse
Hey, i'm new to XDA and i was just wondering if you know how to modify Galaxy S4, Canadian version (SGH-I337M) to make it work on WIND or you might know someone who can help me through this, phone was offically with rogers but now its unlocked and running android 4.3 on it, ill be really greatful if you could help me. waiting for your reply.
Thanks
I've been trying many things to no avail. I am able to get recovery on my i9505G (which I have read is built into the CWM version now for the i9505) and it seems to work fine. I have the 01/08 nightly CM11 on the phone, but whenever I reboot and select "recovery" it gives me this error. Sometimes if I hit the restart the device, it will boot into recovery correctly. I've even started fresh by wiping the entire phone and the multiple partitions (from having started on 4.2) and flashed a fresh 4.4.2 stock (rooted) tar through odin. From there I flashed the recovery, installed CM as I always have, but it is still happening.
What am I doing wrong?
The photo u attached is STOCK RECOVERY. If u want install CUSTOM RECOVERY for install CUSTOM ROMS: HERE
* EDIT: Dont flash custom recovery/Roms/Kernels/Basebands of i9505 for ur i9505G. Its completely different
Joku1981 said:
The photo u attached is STOCK RECOVERY. If u want install CUSTOM RECOVERY for install CUSTOM ROMS: HERE
* EDIT: Dont flash custom recovery/Roms/Kernels/Basebands of i9505 for ur i9505G. Its completely different
Click to expand...
Click to collapse
That is the weird thing, it does have the custom CWM recovery on it, but this happens when I click to reboot into recovery in CM11. I've tried reinstalling CWM numerous times, but I still get this same situation after the first time.
mrmartin86 said:
That is the weird thing, it does have the custom CWM recovery on it, but this happens when I click to reboot into recovery in CM11. I've tried reinstalling CWM numerous times, but I still get this same situation after the first time.
Click to expand...
Click to collapse
Coz u are installing CWM for i9505 no for i9505G maybe?
Joku1981 said:
Coz u are installing CWM for i9505 no for i9505G maybe?
Click to expand...
Click to collapse
I've read on many of the threads here that the i9505G build-specifics were incorporated into "jfltexx" builds.
mrmartin86 said:
I've read on many of the threads here that the i9505G build-specifics were incorporated into "jfltexx" builds.
Click to expand...
Click to collapse
No:
- GT-i9505 is into "jfltexx" builds
- GT-i9505G is into "jgedlteue" builds
Joku1981 said:
No:
- GT-i9505 is into "jfltexx" builds
- GT-i9505G is into "jgedlteue" builds
Click to expand...
Click to collapse
What I meant was the i9505G specifics were builts in the CWM and Cyanogenmod builds of the jfltexx.
mrmartin86 said:
What I meant was the i9505G specifics were builts in the CWM and Cyanogenmod builds of the jfltexx.
Click to expand...
Click to collapse
Yes and no, but we dont gona speak about that now. It will be soooo long :highfive:. You asked one thing sir in this thread... If i helped ya Im happy for it :good:
Joku1981 said:
Yes and no, but we dont gona speak about that now. It will be soooo long :highfive:. You asked one thing sir in this thread... If i helped ya Im happy for it :good:
Click to expand...
Click to collapse
Well here is what I am trying to do. Root isn't a problem, but getting recovery on it is. I've been using the jltflexx builds of CWM and Cyanogen because I read that it was built into it. They both install with no problem and I can get up and running. The problem I run into is getting back into custom recovery and I get that picture error above when I try. I don't know if the custom recovery is getting overwritten by something or what, but it does get installed otherwise I wouldn't be able to get CM11 on it in the first place.
mrmartin86 said:
Well here is what I am trying to do. Root isn't a problem, but getting recovery on it is. I've been using the jltflexx builds of CWM and Cyanogen because I read that it was built into it. They both install with no problem and I can get up and running. The problem I run into is getting back into custom recovery and I get that picture error above when I try. I don't know if the custom recovery is getting overwritten by something or what, but it does get installed otherwise I wouldn't be able to get CM11 on it in the first place.
Click to expand...
Click to collapse
How i see u still having the STOCK RECOVERY and u was telling me it worked ok. If i was u i will try the post #2
Joku1981 said:
How i see u still having the STOCK RECOVERY and u was telling me it worked ok. If i was u i will try the post #2
Click to expand...
Click to collapse
That is what I don't get. How could I have flashed the custom CWM recovery, used it to install CM, but then have stock recovery and can't get back into the custom one all the time? It is really bizarre.
mrmartin86 said:
That is what I don't get. How could I have flashed the custom CWM recovery, used it to install CM, but then have stock recovery and can't get back into the custom one all the time? It is really bizarre.
Click to expand...
Click to collapse
These are my sources about the i9505 jltflexx builds.
http://forum.xda-developers.com/showthread.php?t=2370101
http://forum.cyanogenmod.com/topic/75444-gt-i9505g-cyanogenmod/
EDIT: Seems this is a problem with CWM itself. When I just used TWRP to do all the same things, everything worked fine.
mrmartin86 said:
These are my sources about the i9505 jltflexx builds.
http://forum.xda-developers.com/showthread.php?t=2370101
http://forum.cyanogenmod.com/topic/75444-gt-i9505g-cyanogenmod/
EDIT: Seems this is a problem with CWM itself. When I just used TWRP to do all the same things, everything worked fine.
Click to expand...
Click to collapse
CWM 6.0.4.4 work fine on the i9505G. I use it on mine and have since it came out.
I'm trying to install a custom rom onto my ATT Galaxy S4. I have Safestrap installed and I can boot to the recovery.
I've tried putting BeanStalk on it and it shows the "SafeStrap Enabled" and then shuts off. So then I did some more searching and put ProjectChaos on it. It'll boot to the custom bootlogo that I've chosen and it just stays there. It won't go past that.
I don't exactly know what I'm doing wrong here...
Can anyone give me any insight?
Bbychaos said:
I'm trying to install a custom rom onto my ATT Galaxy S4. I have Safestrap installed and I can boot to the recovery.
I've tried putting BeanStalk on it and it shows the "SafeStrap Enabled" and then shuts off. So then I did some more searching and put ProjectChaos on it. It'll boot to the custom bootlogo that I've chosen and it just stays there. It won't go past that.
I don't exactly know what I'm doing wrong here...
Can anyone give me any insight?
Click to expand...
Click to collapse
which firmware are you coming from? Are you flashing the right kernel modules?
Thr33-F0ur said:
which firmware are you coming from? Are you flashing the right kernel modules?
Click to expand...
Click to collapse
I'm on 4.3 trying to get on 4.4
I'm not completely sure about the kernel. I tried 2 different ones with ProjectChaos
http://forum.xda-developers.com/showthread.php?t=2680868
Sent from my SGH-I337 running GPE using Tapatalk
Check this thread out as well please:
http://forum.xda-developers.com/showthread.php?t=2616221
I don't know about ProjectChaos, but thought Beanstalk was CM based. You can't run CM/AOSP roms. Only TW based with TW kernels--
Check out Mapleleaf rom.... it is tw based and runs beautifully with the googy-max kernel....dumb question but you are wiping between rom changes right?
Gage_Hero said:
Check out Mapleleaf rom.... it is tw based and runs beautifully with the googy-max kernel....dumb question but you are wiping between rom changes right?
Click to expand...
Click to collapse
Yes I am.
I'll check out the links. I've been busy so I haven't been able to try anything just yet. I'll report back when I get to mess with it
rugmankc said:
I don't know about ProjectChaos, but thought Beanstalk was CM based. You can't run CM/AOSP roms. Only TW based with TW kernels--
Click to expand...
Click to collapse
I am assuming ProjectChaos is TW, I got it installed and it's running nicely.
The only problem I've had thus far (I just got it installed a few hours ago) is when it boots up it says "com.android.phone" has stopped when it boots up.
I had to go back into SS and Fix Permissions and rewipe cache, etc. because I was having a reboot issue. But that solved that.
Thanks for the help everyone!!
Bbychaos said:
I am assuming ProjectChaos is TW, I got it installed and it's running nicely.
The only problem I've had thus far (I just got it installed a few hours ago) is when it boots up it says "com.android.phone" has stopped when it boots up.
I had to go back into SS and Fix Permissions and rewipe cache, etc. because I was having a reboot issue. But that solved that.
Thanks for the help everyone!!
Click to expand...
Click to collapse
Glad you got it.
Sent From My Samsung Galaxy S4