Has any one taken a universal apart, or could help me with some guidelines.
Read the Wiki or do some searching.. :evil:
We have the whole service manual of the thing! :roll:
Bonzo said:
We have the whole service manual of the thing! :roll:
Click to expand...
Click to collapse
Please post the link of the service manual!!!
Please scan it in if you don't have it in electronic form.
When I say "we", I'm referring to the users of this forum...
It's available for download from the FTP server.. :roll:
And you would know this if you bothered using 20sek on SEARCHING!
A search for UNIVERSAL SERVICE MANUAL gives all the info you need!
quiblet:
You are new to this site; please use the search function before asking. :!:
I find it highly unlikely that your problems are unique and never asked before.
Leek:
I'm at work, so I don't have FTP access.
It should be in the upload folder if I remember corectly.. :wink:
Are you saying I'm not a "user"?
I spent hours searching. I browsed the FTP server.
The Wizard manual is there (Prodigy dah dah dah).
In fact, I helped people find it, by linking to it (see my posts). We're not all clueless, but the site needs improvement as far as linking information. Just a week ago, the Wiki was entirely broken.
I don't see a Universal manual. I browsed around 6 days ago. I haven't seen any recent anouncements of a new one.
The Wiki has no link on the Universal page to any service manual. Lots of technical information and pictures, but no PDF service manual -- nothing like the Wizard's.
I'm a computer scientist and have been programming assembly code since 1985, so it's not like I can't navigate.
leek:
It was there when I downloaded a few weeks ago..
If it has been removed, I shall extend my sincere appologies to you.
I shall allso see if I have a copy on my harddrive when I get home..
Well, it looks like I don't have to appologize at all!
It took me less than a minute when I found a computer with FTP acces..
ftp://xda:[email protected]/Un...C_CONFIDENTIAL_-_UNIVERSAL_SERVICE_MANUAL.pdf
Now, I haven't been programming since 1985, cuz I was born in 1985.
But root\Universal\Manuals etc doesn't seem to be the worst place to look for a manual, is it?
Anyway; I'm glad you took the time to write a constructive reply to my post..
Most people don't bother..
Strange... I did not see that last week when I searched. If it was there, I don't know how I missed it.
I will fix the Wiki (assuming it works again) to point to it.
You have redeemed yourself. And so shall I.
Thanks - I have taken the Universal completely apart.
Thanks - I have taken the Universal completely apart.
I have a headset fault that I have tried to fix by inserting the headset several times. And looks like I need a Motherboard. Does anyone know where I can get one????
Try this. You will have to send it to them I think.
http://www.htceurope.com/uk/
Bonzo said:
Well, it looks like I don't have to appologize at all!
It took me less than a minute when I found a computer with FTP acces..
ftp://xda:[email protected]/Un...C_CONFIDENTIAL_-_UNIVERSAL_SERVICE_MANUAL.pdf
Now, I haven't been programming since 1985, cuz I was born in 1985.
But root\Universal\Manuals etc doesn't seem to be the worst place to look for a manual, is it?
Anyway; I'm glad you took the time to write a constructive reply to my post..
Most people don't bother..
Click to expand...
Click to collapse
Do i need special access to the ftp site?
Been trying to access to the ftp server and look at the service manual. but then it just say permission denied when i key in my user name. Do i need any special rights to enter the ftp site?
You need to right click on this link, select copy shortcut, open your browser and paste into the address bar.
ftp://xda:[email protected]/Universal/Original_German_and_Englsh_Manuals_etc/
Re: Thanks - I have taken the Universal completely apart.
quiblet said:
Thanks - I have taken the Universal completely apart.
I have a headset fault that I have tried to fix by inserting the headset several times. And looks like I need a Motherboard. Does anyone know where I can get one????
Click to expand...
Click to collapse
eh? surely all you need is a 3.5mm 4 point headphone jack? the usual fault is the detection microswitch 'sticks' in place and closes the circuit so the phone always thinks there is a headset attached. What makes you thnk you need a board? And why isn't your unit under warranty being less than a year old? :?: ( exec brand universals have 2 years)
Richard
p.s if you *really* need a board drop me a pm.
Thanks for the info !
I have the 4 point jack that came with the unit, as for the microswitch is there any way to reset it ?? manually.
I bought my unit from Ebay shortly after the unit developed this fault and the O2 warranty states that the original purchaser only can use the warranty, HTC Europe on reading the website will repair it but for a charge.
So I'm painfully living with the fault currently.
quiblet said:
Thanks for the info !
I have the 4 point jack that came with the unit, as for the microswitch is there any way to reset it ?? manually.
I bought my unit from Ebay shortly after the unit developed this fault and the O2 warranty states that the original purchaser only can use the warranty, HTC Europe on reading the website will repair it but for a charge.
So I'm painfully living with the fault currently.
Click to expand...
Click to collapse
Does the microswitch work? Have you put a metre accross the contacts and checked it? Usually they just stick rather than fail, but they are available as a spare if you look hard enough. ( Farnell's / CPC etc )
HTCeurope will not ( from experience ) repair XDA branded units. As for the warranty not being transferrable according to their terms, threaten to sue as it's against your 'hooman writes' or summat- works for me :wink: ( but never tried with o2 )
Richard
Where is the microswitch ????
Where can I measure on the actual headset jack??
Thanks
quiblet said:
Where is the microswitch ????
Where can I measure on the actual headset jack??
Thanks
Click to expand...
Click to collapse
It's *inside* the socket, when you insert the headphone jack plug, it depresses to detect insertion. You measure across the contacts.
Richard
Richard
I see 4 contacts on the top of the Jack plug, I have measured for open & closed circuit but have come to no conclusion - to fix this If I unsolder the heaset Jack and then turn the unit on again will this cancel the microswitch just to prove the fault?? Then I will buy another jack??
Your thoughts
Thanks
Aldrin
Hai folks,
Did some one have Idea from where can I purchase DiskOnChip MD4331-D1G-V3Q18-X-P. I've a died one and I want to repair him. I've found only one seller in E-Bay but unfortunately the delivery is only to US and payment method is from Paypal.
I repaired one Universal with DOC pulled from some strange MP3 player and now I have to repar another one - but no luck with finding this module over Internet.
Please if someone have some information about price and from where can this be purchased to be nice and share it.
Best Regards
Well ... may be I must wait... :-(
Same problem
Hallo, I have same problem as You. Now I will order this DOC at my friend in mobil service shop. After I will tell You the price and result.
Thank's in advanced - I'll wait
Is there any way to use microphone from the headset while using speaker on phone in calls? I need some kind of registry hack or something.
My microphone is not working, i've sent phone to repair shop, but they couldn't help me. If i manage to do it, i'll make a guide to help other people with mic problems.
please help.
i 2nd this, anyone can help with repairing or opening up the hermes?
Sylpheed said:
i 2nd this, anyone can help with repairing or opening up the hermes?
Click to expand...
Click to collapse
This question is not related to the first posted question!
If you are asking about changing the microphone, I suggest this is not possible unless you have specialised equipment. The Hermes has a multi-layer m'board and it's not a simple case of removing one and soldering in another mic.
Dismantling and Service Manual info - see my signature website
Mike
mikechannon said:
This question is not related to the first posted question!
If you are asking about changing the microphone, I suggest this is not possible unless you have specialised equipment. The Hermes has a multi-layer m'board and it's not a simple case of removing one and soldering in another mic.
Dismantling and Service Manual info - see my signature website
Mike
Click to expand...
Click to collapse
ic ic . that's for the answer..
Please forgive my English
At dismantling at HTC Magician has been broken off SMD an element which is near the reserve accumulator, this element has been soldered with to edge, nearby an inscription about a year of release 2004-10-06. On all photos on dismantling which already spread it it is visible...
It by the way not marked, on a payment is also similar elements... What it for an element (probably resistor) what face value??? And for what it is necessary???
Give the link to the Service instruction or the scheme.
Send somebody the SERVICE MANUAL on HTC Magician on
e-mail: [email protected]
Thought that here will help, but nobody has responded. Here has found the helpful information.
It is the ceramic condenser. Has alignment function on a direct current so its absence should not affect device work considerably. Presumably has capacity to 0,1 мкF, working pressure - to 4 V.
Спасибо Смиту за предоставленную информацию.
The audio/headphone jack in my HD2 T-mobile US broke and I want to replace it. I have been looking all over the internet to find the replacement part, part number or service manual of the HD2. Unfortunately, I have not found anything. Would anybody please provide the part number or place where I can buy new connector/socket?
Thanks in advance.
I am also interested to find this part. Have you had success in finding it?
Hi,
If yall there need it and I can try to get for you. Just drop me a pm
Cheers
Symon L