i have yureka and cwm recovery ,but i want to update my software with ota updates ,so i installed flashify to change recovery from cwm to stock but after but unable install ota update on the yureka with rrecovery ,it shows following error pls see attached image and it has another issue with wifi ,wifi connects once then after some time it hangs and only shows saved device and cannot connect network unless restart the whole device ....please help me and one thing as my original device was hardbricked and customer support gave me another one working and these issues are due to software of hardware pls help me coz i could not recognize the issues
OK , my problem is i was downgrading my yu yureka from 6.0.1 rr rom to official kitkat. which i had done many time and firmware is ok.but, three days back i was doing that once again,this time after successfully flashing i tried it to boot up but it is not booting. I have tried many guide of unbricking but no luck. My laptop acer aspire v3-571-6850 windows 10 pro 64- bit some time shows up yureka as QHSUSB_BULK . QFIL also showing "no port avaiable". When i plug in my phone to my pc my pc gets hang. i tried with mi-flash tool too but no luck......
Its been 3 days
guys i have softbricked my lenovo a6000 and its stucked on lenovo logo
i have tried adb method to flash back recovery mode but when i rum commands it gives error == device null found
when i connect my device to pc it makes an connected sound help me out of this as this is the only mobile i was having
plzzzzzzzzzz guyzzhelp me out
Bro need help I installed twrp and then cm 13 on my a6000 and by mistake I deleted backup of my stock kk rom and now when I try to go in download mode, recovery it doesn't open it show only Lenovo logo . By mistake I flashed a6000+ stock recovery and after that when I try to flash stock recovery of a6000 using adb nothing open .. so now nothing download mode or recovery mode is opening but i still boot into cm13 how solve it to revert back to kk ?
Solution
Shubhamraaj said:
guys i have softbricked my lenovo a6000 and its stucked on lenovo logo
i have tried adb method to flash back recovery mode but when i rum commands it gives error == device null found
when i connect my device to pc it makes an connected sound help me out of this as this is the only mobile i was having
plzzzzzzzzzz guyzzhelp me out
Click to expand...
Click to collapse
I had also stuck in boot logo once in a custum ROM .
but i fixed it : steps .
Download twrp recovery in your pc. ( rename it as twrp.img ) ,
Boot your phone in to fastboot mode .,
Make sure ur pc has ADB drivers ,
Once , phone get into fastboot mode ,
Type this Commands : 1)fastboot devices ( to check if ur phone is getting detected or not , if it shows no device found , check connection )
2) fastboot flash recovery twrp.img ( to flash recovery)
3) fastboot reboot recovery ( to boot into recovery )
4) download any ROM to SD card and flash it from recovery.
Hit thanks button if this helped you.
Hello guys I have a6000 (Lenovo)
But my problem I saw this video
. Which is easy to revert back to kk rom but I have installed twrp which is not useful for above video method .so when I try to to install Philly or cwm which is used in above video it not installing only twrp will installing other custom recoveries not installing so please help me!!! If anybody have the twrp backup of stock kk rom of a6000 please send me!!
My lenovo a6000 also got stock on boot logo in a custom rom. Its now in no use. Now when i try to connect ut to my pc, its only charging. My device is not being connected to pc. Now what to do ??
Androidsabya said:
My lenovo a6000 also got stock on boot logo in a custom rom. Its now in no use. Now when i try to connect ut to my pc, its only charging. My device is not being connected to pc. Now what to do ??
Click to expand...
Click to collapse
FOLLOW THIS
Need help
sasukay said:
FOLLOW THIS
Click to expand...
Click to collapse
Actually 1st i did root my lenovo a6000. Then i was trying to install cyanogen rom through sd card. But it showed e verification failed. And while booting it gets stock showing cyanogen logo. I tried my phone to connect to pc, but it only charges my phone but doesn't show up in connected device in my laptop. I went to an mobile repair shop, bcoz i thought may be i was missing something. But after visiting 3 repair shops, they also couldn't solve my problem. Now how can i get my mobile to back condition ? Need help. If anyone can help plz give quick rply. But i need to talk to someone who can help regarding this issue. So if you can talk to me, plz call me 7008678740. Thank. Plz give response.
New problem arrised
sasukay said:
FOLLOW THIS
Click to expand...
Click to collapse
I could successfully restored my lenovo a6000 kitkat rom. But a new problem arrised. When i try to power on, it just starts for 2 seconds and vanishes immediately just showing the lenovo logo. Again n again it just being on and off. When i put this battery in another a6000 plus mobile, the same problem occurs. I mean , i want to know why is this happening ? Is the battery gone !!!
Androidsabya said:
I could successfully restored my lenovo a6000 kitkat rom. But a new problem arrised. When i try to power on, it just starts for 2 seconds and vanishes immediately just showing the lenovo logo. Again n again it just being on and off. When i put this battery in another a6000 plus mobile, the same problem occurs. I mean , i want to know why is this happening ? Is the battery gone !!!
Click to expand...
Click to collapse
On first look, it seems like your phone is in bootloop and you need to flash new ROM after wiping the partitions correctly. But, then you are saying that same thing is happening when you insert this battery in another A6000. I think your battery has gone rogue due to some virus, just throw it away. Jokes apart, if another device is showing same behaviour then its almost 100% sure, that your battery has issues and need to be replaced. And, why don't you actually check switching on your phone by putting the battery from that another A6000 into your A6000.
I have checked with another battery, my phone works fine. But that particular battery is doing only on off continuously. But #important thing is , i don't think the battery has gone. Bcoz during the on off process, if i press volume down key, it shows lenovo logo and gets stock there. If the battery has problem, then how can be it stays on showing the logo ?? Confused ???
I am an Yu Yureka user starting March, 2015. I have waited 2 years to get the Marshmallow update through OTG before getting root. But this new update is full of glitches such as
1. When my phone is switched off and charging no percentage of charge completion is shown.
2. When pictures taken in HDR mode, camera screen turns green and stay like that until the phone is restarted. Also the picture quality degraded.
3. This new update takes away the advanced reboot option which was under the Developer Options( in Lollipop), so there is no way to go into recovery mode without connecting phone to pc through usb.
Now coming to the main part,
4. There is nothing that can root my phone. Starting from phone applications to pc applications nothing can root it.:crying:
5. So I tried the cmd Process by using command window through PC by unlocking my Bootloader first, after that I installed TWRP.
6. When the above processes were successful, I transferred the Supersu Zip file in the internal and external of my phone and then executed them from TWRP. Surprisingly it was also successful.:good:
7. Now when I turned my phone on and checked with 2 different root checker apps, my phone was still not rooted.:crying:
8. Then I probably tried the Supersu installation more than 10 times, factory reset it more than I can even remember but still nothing.
9. My phone developed a new problem that is it randomly reboots itself.:crying:
If anyone knows any solution to the above problems, specially on how to successfully root my Yu Yureka, plz help me. I lost all my hope and confidence.
Thank You for taking your time and reading this.
I don't know if u have done stuffs properly....so here's the thing...IF U R RUNNING LOLLIPOP OR ABOVE!!!!!! then------------
1. Download latest TWRP from the official site and flash it
2. Flash any latest nougat based roms like ---- lineage os, official RR, aosp extended etc. (there r so much astonishingly beautiful roms and i can't name all of them....please don't mind devs )
X. Flash GApps if you want to from here : opengapps.org (arm64,7.1.x,pico variant)
3. Very imp. for you !!!!!!Flash magisk (latest v13.3) from here : (tiny.cc/latestmagisk) and flash it
P.S. Lineage might not support magisk so you have flash there supersu addon which can be found on their official website (in device tree on the left side search for "extras" on the very last option)
Hit Thanks Button if I helped you
yureka plus not getting detected in pc
hey i too have the same problem but one more is that i cannot connect it to pc its just charge my phone unable to connect it and if i connect it in switched off position it just act as is its charging for a second and stop yu boots abd again it charge and yu boots
Need some input to downgraded from marshmallow to official lollipop for YU Yureka...
I am facing the some issues like automatic restart for yu yureka due tounstable Marshmallow update. Can you please share the steps to downgraded to official update like lollipop.
My Yureka goes to bootloop but works fine when connected to charging. I'm able to go in recovery mode as well. Flashing custom roms dint work . I also flashed stock rom. Please need help as i know we wont get good battery offline and online.