Database Users

win xp final driver wlan ok touchscreen OK except calibration

This post is for people who want to install win xp on HTC SHIFT:
The driver i've found and WORK are: UPDATED LINK 10-05-2008
graphic card: http://downloadcenter.intel.com/dow...All&OSFullName=All+Operating+Systems&lang=eng
usb network: http://www.asix.com.tw/products.php?...emID=86;71;101
touchpad: http://drivers.synaptics.com/Synapti...0_1_8_XP32.exe
intel chipset: http://downloadcenter.intel.com/dow...All&OSFullName=All+Operating+Systems&lang=eng
wlan marvell sd-8686: work!!! howto is here
audio: ftp://152.104.238.19/pc/audio/WDM_R195.zip
bluetooth: work without driver
3g connettivity: sharing with active sync
fingerprint: www.ngt.cn/files/fingerprint.rar
vitakey for fingerprint:copy c:\program files\vitakey from vista partition and execute setup
htc control panel: work only on Vista?????
change resolution: work only on Vista??????
touchpad: WORK !!howto is here
please post link for driver only if tested WORK on XP.
WLAN DRIVER HOWTO:
download wlan driver at: http://www.raondigital.com/data/WLAN Driver_1_1.zip
download sdbus at: http://www.raondigital.com/data/SD Bus Driver_1_1.zip
now unpack sdbus driver to root of your o.s.
reboot your shift and start windows xp disk
run recovery terminal
copy sdbus.sys to yourxpdrive:\windows\system32\drivers
reboot
open device manager
on controller host secure digital->properties->driver detail
the driver version now is 6.053.......OK
go to marvell sd-8686->properties->update driver->select the directory of wlan1.1 driver
and all WORK FINE!!!!!!
Now i need someone to port resolution and htc shift control manager!!!!!!!
fabio
EDITED TOUCH SCREEN
TOUCHSCREEN HOWTO
Installation proces for touch screen:
1.Download HTC Shift Driver Updates (Windows Vista) from htc.com
2.From the drivers packet choose following items:
Vista ECDrvV1 and
Touch Screen 1.0.1.10
3.First instal Vista ECDrvV1
4.Install Touch Screen 1.0.1.10(please do not forget to confirm the announcement
......The software was not tested for windows system ETC......which will appear during the installation process and continue the installation)
5.Restart
6.Go to Start-Control Panel-System-Hardware-device Manager-Human Interface Devices-and here are two HID-compliant device.Disable only the first HID-compliant device (the first HID - compliant from the top)
7.Now the calibration is working
-------------------------------------10-05-08-------------------------------------
Thx to Pof for htcset for enable and disable wifi and bluetooth!!!!
Pof Greate work!!!
IMPORTANT!!!!!!!
-------------------------------16-06-08------------------------------------------------
uploaded htc hid pen driver and controller
please use FULL driver magician with demo doesn't work!!!
i need help to :
2° create an intuitive howto with pictures
4° port resolution changer to windows XP
5° resolve if exist vitakey issue!!!
HELP is appreciated!!
HELP ME! HELP ME!

I tested graphic card, usb network, touchpad, fingerprint,Realtech Audio, all works well.
3g connetion will works by itself after you install activesnyc(mine is ver4.5) and run internet sharing in WM side

please post the link for fingerprint........there are someone who have a wlan driver tested???

has anyone found the drivers for the wlan adapter?
the fingerprint sensor is the same used on some hp laptops i've seen in the past. i'll try their drivers and will reply if it succedes.

post post post!!! win xp is the grate s.o. for this device after linux.....boot time is 20" !!!!
please post driver link!!!!

now have some wlan driver extract from vista...all is ok but s.o. can't start device!!!!!

there is some news!!!!
wlan driver downloadable from http://www.raondigital.com/data/WLAN Driver_1_1.zip
the driver is ok but there are a problem to start the device and seem to be a microsoft hotfix.... i can't try this because isn't downloadable from microsoft (KB921413) and i find only english version here http://hf.xable.net/files/KB921413-v4.exe(i have italian shift so this hot fix doesn't install).
please try this and post result!!!

The driver for WLAN device comes through windows update and comes up as cannot satrt coz the control center starts the device.
Bluetooth installs fine under win XP apparently - cannot confirm. but you have to have it turned on in vista before installing xp otherwise it doesnt pick it up - again cant confirm but may explain why no bt devices have been picked up in my xp installation.
finger print driver from vista works perfectly under win XP, cant upload atm as both the shifts im workin g on are at at work and im not in all this week, but i thing theres a folder called finger print reader or sumthing like tht in program files under the vista image, just copy that file and the x32 executable file and the reader is installed the vitakey app also works under xp.

fingerprint driver
fingerprint driver
winxp confirmed
may download from: www.ngt.cn/files/fingerprint.rar

now wlan WORK!!!!!!!

Sticky
I Think that you should sticky the thread.
Now we need only the touchpanel driver and we will have a perfect Win XP Machine!

febelus said:
Now i need someone to port touchscreen driver,resolution and htc shift control manager!!!!!!!
fabio
Click to expand...
Click to collapse
I had extracted all the drivers previously from vista to have a look at but couldnt manage to get them to work, im due back into work tomora evening and will upload them all then and see if any of you guys can mange to get them to work

audio
noticed you didnt have the audio drivers listed (realtek alc268) so here you go
http://www.realtek.com.tw/downloads/...&GetDown=false

someone know a valid fingerprint software?????

vitakey install sufccessfully but doesn't work!!!!!!!!!!finger print software needed!!!

First 5 links don't work for me. Can you put the full urls in please? Or zip them up and host them all somewhere?
I also agree this thread should be stickied!!! Fantastic work.

I can not find bluetooth after winxp install, Should turn it on under vista before installing Winxp? How can i find bluetooth under winxp if i not? thanks.

before install winxp you need to turn bluetooth and wifi on in vista!!!!

And If I ve removed vista?

I think the only way to use touchscreen for XP right now is by running the Remote Desktop on the WM(SnapVue).

[Q] HELPP!!!!...TX2 N-trig driver NOT installed!!! :(

the N-Trig driver is not installing in windows 8 x64 bit.
i downloaded the latest driver from HP for windows 7 x64, but no luck
it gives
"Fatal Error during Installation", "the OS is not adequate"
i can use the digitizer....and can touch the screen on lockscreen but in the desktop or the metro start menu, the finger touch is not working
i can see a small "ripple" that shows that the screen is actually identifying the touch. reverted back to windows 7 and i can use the touchscreen. any suggestions???

come on!!!!...anyone PLEASEEEEEEE!!!!...i beg you!!!!....i really want windows 8!!!..but have the above problem!!!

If the driver comes as an installer, run it in "Windows 7" compatibility mode, if that doesn't work try vista compatibility and then windows xp compatability. If that doesn't work, try extracting the installer (7z) as if it were a zip, goto device manager and try to force the drive install by selecting the driver manually from the directory you extracted it to.

Driver now available
You can now download the driver here:
http://www.ntrig.com/Content.aspx?Page=Downloads_Drivers
Cheers
andrew-in-woking

Silead mssl 1680

Hey, I need the silead mssl 1680 touchscreen driver for an 8" windows 8.1 tablet, the touchscreen is like a mirror, my one finger tap appears as two or three.

Hi, Im in the same situation, badly need the MSSL1680 driver for Windows 8.x
Anyone who can make a bakup for us ?
Thanks in advance
Bjonne

Drivers you requested
Bjonne said:
Hi, Im in the same situation, badly need the MSSL1680 driver for Windows 8.x
Anyone who can make a bakup for us ?
Thanks in advance
Bjonne
Click to expand...
Click to collapse
I have the Windows 8.1 and Android driver for this model

MJ-Tech said:
I have the Windows 8.1 and Android driver for this model
Click to expand...
Click to collapse
Thanks alot! Strangely the drivers install succesfully, but the touch is off by like 2 inches, and only Works on the left side of the screen, like I need a second "part" of the driver or another device driver is missing, though nothing is missin in device manager.
Any ideas ?

MSSL1680
Hi, did you ever sort your touch screen problem? I have the same problem searched everywhere for solution.
can install driver but touch is all over the place.

Driver buggy for Windows 10
Bjonne said:
Thanks alot! Strangely the drivers install succesfully, but the touch is off by like 2 inches, and only Works on the left side of the screen, like I need a second "part" of the driver or another device driver is missing, though nothing is missin in device manager.
Any ideas ?
Click to expand...
Click to collapse
Hi,
i have the same issue -- the response on the right side of the landscaped screen is mirrored. Still looking for a suitable touchscreen driver or driver update for Silead.

Hello, I have a tablet with Windows 10 1511 and a touch 10.1 MSSL1680 and I am in the same situation, the touch done anything! Anyone found a solution?

my tablet also has this issue - genuine Windows 8.1 w/ Bing was fine, but after fresh install of Windows 10 - touchscreen is some kind of mirrored...
I tried at least ten different drivers or FW-files, always rebootet and fully deleted the not working driver before. no success so far...

Still looking for the Silead for my tablet, a Proscan PLT7064-B-K
I thought I made a backup of the drivers but sadly seems like the touch screen driver got corrupted (left half of the screen is ok except for a small offset and right side of the screen is mirrored horizontally ie right side edge touch register in the middle of the screen and right side middle of the screen register on the edge...)
I can't seem to find the drivers for my tablet but in my search I found other Silead MSL1680 & GSL1680 drivers ... one of those drivers might be the ones that MJ-Tech uploaded, sorry, renamed a few folders for better organization and have lost track from where I got some of them!
Hope it helps some of you that are looking for those!!

Hello everybody, i had the same issue (x axis mirrored) and solved it extracting data from the restore data following these steps:
-used these files: www . dropbox . com /s/x0tuibvuz0fqxle/silead_reverse.zip?dl=0 <-without spaces
-from windows device manager uninstalled the current driver for silead touchscreen (checking delete driver software for this device)
-copied the files in the "copy" folder (from the zip) into the C:\Windows\System32\Drivers folder
-now going back to the windows device manager right clicked on the device -> update software driver -> find in the computer -> selected the "KMDF HID Minidriver for Touch I2C Device" folder (from the zip)
-rebooted and the touch screen worked perfectly

VortHex said:
Hello everybody, i had the same issue (x axis mirrored) and solved it extracting data from the restore data following these steps:
-used these files: www . dropbox . com /s/x0tuibvuz0fqxle/silead_reverse.zip?dl=0 <-without spaces
-from windows device manager uninstalled the current driver for silead touchscreen (checking delete driver software for this device)
-copied the files in the "copy" folder (from the zip) into the C:\Windows\System32\Drivers folder
-now going back to the windows device manager right clicked on the device -> update software driver -> find in the computer -> selected the "KMDF HID Minidriver for Touch I2C Device" folder (from the zip)
-rebooted and the touch screen worked perfectly
Click to expand...
Click to collapse
Hi there any chance you can reupload the fixed driver as your link isn't working. Thanks

hatton920 said:
Hi there any chance you can reupload the fixed driver as your link isn't working. Thanks
Click to expand...
Click to collapse
Here's another link to the same file:
https://drive.google.com/file/d/0B6_CricfVw7BMHNuTERrNHNMcUU/view?usp=drivesdk

I hope you feel like a beast! You are awesome!
Thank you VortHex

didn't work for me, it actually reversed both side of the screen now!!!

WakedPaul said:
didn't work for me, it actually reversed both side of the screen now!!!
Click to expand...
Click to collapse
Hello i got a Mpman Converter 10 tablet runninf windows 10 i cannot found anywhere to right settings for the touch screen, all the drivers found so far got offset from the touch or reversed x y axis. Any sugggestion? Anyone got this kind of tablet who could extract the correct firmware for this?
Thanks

I have same issue. Any help would be highly appreciated

Hello i got windows 10 running on this tablet now, everything is ok, i sent back and they reinstalled windows 8.1 on it and after that i managed to upgrade to windows 10, if anyone knkws jow can i extract the driver or the configuration, please contact me.
Sent from my Redmi Note 2 using Tapatalk

Drivers W10x64
Hi to everyone. After some month fighting this pice a crap tablet X view Quantum Carbono wich have the same touchscreen, I found some russian page with all the drivers. Here is the link to my google drive file with all the drivers for W10x64
drive. google. com/open?id=1OdZXL4YeDY5FZh0pSckooEzmNsRyU2Ki
I hope it helps someone.

can you reupload the silead reverse zip , vorthex ?

I will to report versions:
Code:
09/05/2014,14.37.21.378 Silead KMDF HID
10/30/2014,11.59.20.989 Chuwi Vi8
11/05/2014,17.49.51.980 GSL1680 portrait common 1
11/05/2014,17.49.51.980 GSL1680 portrait common 2
11/05/2014,17.56.57.390 TSP Win8 driver
11/05/2014,17.56.57.390 TSP driver
11/05/2014,17.59.24.923 Silead reverse
11/05/2014,18.3.21.190 GSL3680 landscape common
11/05/2014,18.3.21.190 Win8 TP driver
12/08/2014,15.46.55.386 PG-HK70DR2503
01/04/2015,17.9.46.979 Proscan_PTL7064-corrupted
03/17/2015,15.13.25.219 i701_Win10
05/07/2015,19.18.24.864 Viglen Connect 8.9 (attachment) unsigned driver
06/29/2015,17.22.25.740 Chuwi Vi10
I have tested some versions, but not working. Latest unsigned works for me and i download it from here. Microsoft update catalog: http://www.catalog.update.microsoft.com/Search.aspx?q=Touch I2C Device

[Q] Windows 10 installed on Chuwi vi8 but with one problem.

As the title says I've installed Windows 10 TP on a Chuwi vi8. Easy enough to do, iso on to USB stick (fat32) with GPT part for uefi, then just hit escape on startup and go to boot menu, even added Wifi drivers to usb and loaded them during install which worked. Upon finishing I had to load a lot of drivers manually but managed to get a clear device manager. Had to manually install Intel HD drivers as it sees the MS drivers as newer, until you do this it's at a snails pace.
Anyway, the one problem I have is the touchscreen. It's recognising touches, just nowhere near where I'm actually touching it. Ran the calibration and having no luck. The current drivers are 'KMDF HID Minidriver for touch I2C Device' and these are the ones I found for W8.1 .
Anyone know of an alternative/fix or is this just a W10 TP problem? TIA

That's weird. I just went back to 8.1 but had been running 10 for weeks. I just installed the 8.1 driver, it complained initially (exclamation mark) but cleared after a reboot. No touch accuracy issues for me on 10074, 10122, and 10130. I think I got my 8.1 drivers from a link on techtablets.com.
BTW, the only issue I had was constant battery drain, even on standby. Are you experiencing that?
I also have the dual boot VI8 and wiped all partitions before installing 10, if that matters.
Edit: I've pretty sure these were the drivers I used: http://techtablets.com/download/Chu...ivers/Chuwi Vi8 Win8.1 drivers April 2015.zip

Hi my2sense, cheers for the reply. I used the same drivers, mine's the single OS no hdmi version. I found another set on a Chinese web site last night, I'll try them out today. After a lot of searching it seems some people are having the same issue after reinstalling 8.1. So maybe the drivers have been updated and are to blame. I may try pulling the old drivers out of the recovery drive I made, see if that helps.
As for the battery, yeah it's on constant drain when in use. Before I installed the drivers it seems to have charged as I was on 40% when I started in 8.1 and 75% when I finished in 10. The brightness levels also seem off in 10, just nowhere near bright enough. I'll probably head back to 8.1 after I have it working and wait for an official version. It's a shame as windows 10 has a much smaller footprint than wimboot 8.1 + recovery drive and seems like a nice OS.

Try regoing to 8.1 and hard reset for best results
Sent from my SM-G7102 using XDA Free mobile app

zorlac said:
As the title says I've installed Windows 10 TP on a Chuwi vi8. Easy enough to do, iso on to USB stick (fat32) with GPT part for uefi, then just hit escape on startup and go to boot menu, even added Wifi drivers to usb and loaded them during install which worked. Upon finishing I had to load a lot of drivers manually but managed to get a clear device manager. Had to manually install Intel HD drivers as it sees the MS drivers as newer, until you do this it's at a snails pace.
Anyway, the one problem I have is the touchscreen. It's recognising touches, just nowhere near where I'm actually touching it. Ran the calibration and having no luck. The current drivers are 'KMDF HID Minidriver for touch I2C Device' and these are the ones I found for W8.1 .
Anyone know of an alternative/fix or is this just a W10 TP problem? TIA
Click to expand...
Click to collapse
me too (win10 10240)
any solution ?

Hey,
I've ran into the same problem. I'm waiting for the tablet to reset but its taking ages.
Either way, I'm going trying the following;
(Just google "Chuwi Vi8 Windows 8.1 Reinstall Touchscreen Calibration Problem: Resolved" first link)
I'm not allowed post urls yet with my low post count
Seems like it might be worth a shot at least. I'm assuming the drivers work with Windows 10 however.
Jim

Just to note that following the instructions exactly as indicated in the post referred to in my post above leads to a correctly functioning touchscreen on the VI8 in Windows 10

i had the exact same problem with my vi10, just download the win 8.1 touchscreen drivers from somewhere and restart your tablet

Open device manager - human interface device - right click KMDF HID Minidriver for Touch I2C Device then choose Uninstall (tick delete the driver from þos device). Download this driver ht tps:// drive .google .com /file/d/0B8WYoM0IL-EHX1lMV2FZcUdibkE/view?usp=sharing
On device manager right click and scan new hardware. You can see new hardware found. Use the new driver.. now restart the device.. hope this can help

zorlac said:
As the title says I've installed Windows 10 TP on a Chuwi vi8. Easy enough to do, iso on to USB stick (fat32) with GPT part for uefi, then just hit escape on startup and go to boot menu, even added Wifi drivers to usb and loaded them during install which worked. Upon finishing I had to load a lot of drivers manually but managed to get a clear device manager. Had to manually install Intel HD drivers as it sees the MS drivers as newer, until you do this it's at a snails pace.
Anyway, the one problem I have is the touchscreen. It's recognising touches, just nowhere near where I'm actually touching it. Ran the calibration and having no luck. The current drivers are 'KMDF HID Minidriver for touch I2C Device' and these are the ones I found for W8.1 .
Anyone know of an alternative/fix or is this just a W10 TP problem? TIA
Click to expand...
Click to collapse
you havent got problem with calibration it is problem with firmware
but here is driver for you
http://www.mediafire.com/download/j...6_Drivers_Update_Sorted_By_Junnie_V150806.rar

My problem was the same after installed Windows 10 on chuwi vi8 (single boot version), the touch was comepletely inverted: when i touched left bottom corner the touch showed at the top right corner and so on. I remembered that on Android when i ported roms from different devices i had the same problem.
How to fix it?
1. remove the touch driver (KMDF HID Minidriver for touch I2C Device).
2. The screen rotation is disabled by default on Windows 10, you need to enable it. After that you did that, rotate the tablet upside down: with the tablet's Windows logo at the top of the screen (IMPORTANT!).
3. install the KMDF HID Minidriver for touch I2C Device driver again. The driver will take the initial directions now, so be sure that you dont rotate the screen during this step.
4. reboot, and its fixed!
Hope it helps....

Just Thanks!!
tehanget said:
Open device manager - human interface device - right click KMDF HID Minidriver for Touch I2C Device then choose Uninstall (tick delete the driver from þos device). Download this driver ht tps:// drive .google .com /file/d/0B8WYoM0IL-EHX1lMV2FZcUdibkE/view?usp=sharing
On device manager right click and scan new hardware. You can see new hardware found. Use the new driver.. now restart the device.. hope this can help
Click to expand...
Click to collapse
Thanks for sharing this post :good::good:,
I followed your simple instructions and finally, this really worked for me after a lot of time having issues with the touch screen.
Hope this works for most people too.
Best regards.

tehanget said:
Open device manager - human interface device - right click KMDF HID Minidriver for Touch I2C Device then choose Uninstall (tick delete the driver from þos device). Download this driver ht tps:// drive .google .com /file/d/0B8WYoM0IL-EHX1lMV2FZcUdibkE/view?usp=sharing
On device manager right click and scan new hardware. You can see new hardware found. Use the new driver.. now restart the device.. hope this can help
Click to expand...
Click to collapse
I followed your instructions, the device is recognizated but the touch present multi points on the screen and the miviments is inverted.

I have the same problem.
I had it windows 10 out of the box, however I had to reset it to defaults recently. Upon booting up I'm on the page where you choose your time zone/keyboard layout/language/country..etc, there is a next button on it too. Its part of the windows steps before it actually boots into Windows for the first time, unfortunately the touch screen isn't working on at all on this page. So im unable to even get to device manager or reload touchscreen drivers.
So for me, What are my options?
Could I use a micro USB to USB converter and plug a mouse in the tablet???. Im not sure if the mouse would get recognized or not though... I cannot think of any other way to solve this??.

Silead MSSL168C

I'm looking to find the driver for the device with the hardware ID MSSL168C, ive tried several Silead Drivers but they were all for MSSL1680 and wouldnt allow the touchscreen to function on the MDG Visiontab i have with windows installed.