the N-Trig driver is not installing in windows 8 x64 bit.
i downloaded the latest driver from HP for windows 7 x64, but no luck
it gives
"Fatal Error during Installation", "the OS is not adequate"
i can use the digitizer....and can touch the screen on lockscreen but in the desktop or the metro start menu, the finger touch is not working
i can see a small "ripple" that shows that the screen is actually identifying the touch. reverted back to windows 7 and i can use the touchscreen. any suggestions???
come on!!!!...anyone PLEASEEEEEEE!!!!...i beg you!!!!....i really want windows 8!!!..but have the above problem!!!
If the driver comes as an installer, run it in "Windows 7" compatibility mode, if that doesn't work try vista compatibility and then windows xp compatability. If that doesn't work, try extracting the installer (7z) as if it were a zip, goto device manager and try to force the drive install by selecting the driver manually from the directory you extracted it to.
Driver now available
You can now download the driver here:
http://www.ntrig.com/Content.aspx?Page=Downloads_Drivers
Cheers
andrew-in-woking
Related
I'm using vista home and have flashed many a rom on my hermes with wmdc after following the steps here:
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=23&Itemid=27
My problem is i can flash my hermes but not my wizard.
I get MFC application has stopped working.
Anyone point me to why this is happening as when i've searched the results point to doing the above?
Bump
Just a quick bump see if i get lucky?
Im using Windows Server 2008 64bit so vista modem drivers n stuff are no go.I know how manually select the drivers, but windows just says they are incompatible (INCOMPATIBLE, not up-to-date or anything else - windows just says they perhaps arent good for x64 etc even for the 64bit ones).
So here is what i done and what WILL WORK ON ANY SYSTEM - from win 2000 to win server 2008 64bit or windows 7 beta or whatever your using.
Install vmware (i used VMware Workstation 6.0.4 Build 93057)
Install WinXP-SP2/3 on it
make sure the usb device is selected on the top of the vmplayer.
install activesync, sync the phone.
install .NET FRAMEWORK 2.0 OR NEWER
start the ruu wrapper
flash & enjoy.
no need for crappy drivers, just install vmware, flash, uninstall vmware.thats all.
Ive tried searching now for about 2 hours for a fix.
Ive just installed windows 7 x64 pro and i can not get it to work with my HD. It will not recognize it at all. Ive had various problems, always seems different.
Ive tried turning off the enable fast data. This changed the problem, but didnt fix it.
At the moment, i have that enabled and the problem from what i can tell is, in device manager Microsoft Windows Remote Adapter is not working.
If i disable fast data, i get a connecting to host message on my HD screen and nothing else really happens.
Ive tried updating the USB drivers, but that will not work, something to do with unsigned drivers.
Under mobile devices in device manager i get PocketPC USB Sync instead of the HTC usb Sync thing.
Is there a solution for this please?
With me it worked on windows 7x64 straight out of the box. I suggest re-installing win 7.
I'd have to agree, using Windows x64 Professional here and both my Touch HD and my partners work fine (I had to allow Windows to download an updated version of Windows Mobile Device Center first though).
I do not suggest reinstalling Win 7. Geez. Sorry, but that's using an axe to trim a toenail.
Try downloading and reinstall the x64 version of Windows Mobile Device Center. Make sure you get version 6.1. Do not download any driver updates meant for Vista - you don't need them. But this main file will be marked Vista - it includes you too.
Next, it's possible that when you first plugged in the blackstone, a driver install got canceled or didn't happen right. Use your hardware manager and look for any new generic devices or HID devices. You can try deleting the hardware from the list and asking device manager to look again.
MAKE SURE YOU CLOSE WINDOWS MEDIA CENTER.
Good luck.
Installed windows 7 last week.... i mainly use this pc at home and at work i use XP.
Anyway just connected it now to my notebook and after some driver downloads from windows the phone works fine...
make sure u download the latest mobile device center.
I had the same with my Topaz and windows 7. The fix was to disable the windows firewall while syncing.
This solved my sync problems with Windows 7 ultimate x64
Open notepad
write the text : net localgroup Administrators LocalService /add
save the file as e.g. HTC.bat somewhere on your hard drive where you can find it
Locate with Windows Explorer the .Bat file you just edited
Rightclick on the bat fil
select "run as administrator"
restart your computer. Your HTCH Touch HD should connect without problems
Hi guys, i am trying to flash the wp 7.8 rom and i have downloaded the samsung drivers ..note: i also have rev 1.3 . so i go into magldr on phone and plug usb in and it says "installing drivers" than it says it cannot install...does anyone have any ideas... btw i am using parallels windows 7 on a mac
same problem..
geauxlsu83 said:
Hi guys, i am trying to flash the wp 7.8 rom and i have downloaded the samsung drivers ..note: i also have rev 1.3 . so i go into magldr on phone and plug usb in and it says "installing drivers" than it says it cannot install...does anyone have any ideas... btw i am using parallels windows 7 on a mac
Click to expand...
Click to collapse
Might be a little late, but which drivers are failing to install? I had a couple of issues getting everything configured on Windows 8 64-bit. For the Samsung USB drivers I had to use Compatibility mode for Windows 7 to get them to install. When I installed Windows Mobile Device Center drivers for the DFT image installer, I had to use compatibility mode for Windows Vista. Might want to try using the compatibility mode and see if it helps. You can right-click on the .exe for the driver install and go to the compatibility tab to set the version.
See here for much more detail: sevenforums.com/tutorials/316-compatibility-mode.html
I had the same issue on Windows 8. I then tried it in Windows 7, even then it failed. Then I restarted the system and soon the driver got installed.
Hello XDA,
I have recently installed Windows 8 pro x64 and loving it so far But......
I have a Hp Pavillion with Amd Radeon Hd 6470M. Under 'Device Manager' it is indicated as 7400M with that little 'caution symbol'.
I have tried to update the drivers via the catalyst Program 'v12' for windows 8, but if I try to install it says "catalyst cannot download drivers because of incompatible software bla bla bla. I got another setup from hp.de and I managed to proceed with the installation. During installation the screen flickers a lot 'normal I presume' but after restarting I get a blank screen, lots of flickering and the fun going nuts. I managed to get the catalyst software running through 'run' and uninstalled the newly installed drivers, back to normal!!
Until now the 'caution' symbol is persistent.
Does any one know where to get 3rd party drivers or if you have a solution it will be highly appreciated!!
Sent from my LG-P990 using Tapatalk 2
TheNesski said:
Hello XDA,
I have recently installed Windows 8 pro x64 and loving it so far But......
I have a Hp Pavillion with Amd Radeon Hd 6470M. Under 'Device Manager' it is indicated as 7400M with that little 'caution symbol'.
I have tried to update the drivers via the catalyst Program 'v12' for windows 8, but if I try to install it says "catalyst cannot download drivers because of incompatible software bla bla bla. I got another setup from hp.de and I managed to proceed with the installation. During installation the screen flickers a lot 'normal I presume' but after restarting I get a blank screen, lots of flickering and the fun going nuts. I managed to get the catalyst software running through 'run' and uninstalled the newly installed drivers, back to normal!!
Until now the 'caution' symbol is persistent.
Does any one know where to get 3rd party drivers or if you have a solution it will be highly appreciated!!
Sent from my LG-P990 using Tapatalk 2
Click to expand...
Click to collapse
No third party drivers mate... I had the same problem... My advice is to dual boot your lappy.. I have a DV6 pavilion... Also do not install catalyst manager software... The only thing you can do right now is to update the driver using device manager...
i have a dv7 i tried everything except the obvious and it worked. I downloaded my drivers from hp's support site. Changed the compatability to windows 7 and installed as admin worked great all back to normal.
On my dv6 3006tx the default Windows 7 drivers work well - if you can force the installation of them.
Look for a swsetup folder on your C:\ root. There may be correct drivers within there.
If not, manually download the correct driver's from HP's site. Do NOT use an automatic driver detector. Run the installer, and everything will extract to C:\AMD or something. Then you must install the driver files directly through Device Manager. Right click, update driver software. Try both options. Also try the 'have disk' sub-option, and navigate to the .inf files you find in the directory.
Unfortunately, it's mostly trial and error. The drivers probably will work - but AMD just won't let you install them! If only there were a way to bypass every single OS version check they make...
Also try the generic Windows 8 GPU drivers from AMD's site. You probably won't get switchable graphics, though.
http://leshcatlabs.net/
You're welcome.
im also have Hp Pavilion but Amd Radeon 6480G and this drivers works work me good
http://sites.amd.com/us/game/downloads/Pages/radeon_win7-64.aspx#1
ps im have G6-1215SP and you?
hi everyone, i just upgrade my pc from 8.1 to windows 10.but after successfull installation there is no sound in pc..it shows that no audio device found.i attached screenshort below...
and i also clean install windows 7...but the problem still remained....i also install driver but not work.....need n help
Have you tried updating your driver's?
Sent from my BN Nook HD using Tapatalk
A AJAY said:
hi everyone, i just upgrade my pc from 8.1 to windows 10.but after successfull installation there is no sound in pc..it shows that no audio device found.i attached screenshort below...
and i also clean install windows 7...but the problem still remained....i also install driver but not work.....need n help
Click to expand...
Click to collapse
Install proper sound drivers
Sent from my Micromax A092 using Tapatalk
no driver worked......i try clean install of windows 7 and use my driver cd but,,there is no sound
So you formatted again and did another install of Windows 7, and it still doesn't show up? Is it onboard audio? Check the BIOS to ensure it's enabled.
Google brings up a lot of results, have you tried looking at them? What does Device Manager show?
If it still doesn't work, the sound card/motherboard if onboard might be dead.
I can't count on two hands how many people, including myself had this upgrade problem. Always audio or video.
Firstly, I'd check to see on the notebook/pc manufacturer website if they have Windows 10 drivers for your model. That's the best place to start.
Some older drivers are getting automatically updated through Windows Update. It seems Microsoft has encouraged some key driver updates. E.g. Intel integrated graphics.
Lastly, uninstall the driver, reboot your computer, now, install the driver again under compatibility mode for the version of Windows you have.
For audio, compatibility mode worked. Get this. My notebook came with Windows 7. The Windows 7 driver works (after about 20 attempts) but the Windows 8 driver doesn't. My understanding is that Windows 8 drivers are a bit more compatible with 10 than 7. But the 7 driver actually worked better.
Let us know how you get on.