Related
Does anyone know of such a ROM that I can have root, download, deodex, and debloat (but no mods) for the SGH-I337? I'd like to run a pure stock rooted ROM without bloat. I do not want the modded (black) apps with the messaging and etc. Just the full on debloated stock experience with root privileges. No, I do not want a competition with whatever ROM is best as I do not intend to start an argument about it. So, in that case, does anyone have suggestions or the link to another XDA thread? Also, please make sure that it's latest stock for AT&T. Thanks everyone!
Sent from my GT-I9505G using XDA Premium 4 mobile app
Ya could try this one http://forum.xda-developers.com/showthread.php?t=2364635 however how you flash it will depend on what firmware your running now. If your mdf then refer to the safestrap threads for proper flsshing procedures and if yur mdl then follow loki directions. Hope this helps
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
I've been using MDOB for a month or so and it is great. Great battery life, smooth, debloated stock, excellent support -- a great ROM. -- Bud
Let me tell ya I have owned hd2, gs2, gs3, gs4, nexus s , nexus 4,atrix hd,transformer 300tf, galaxy tab 2 7.0 galaxy tab 2 10.1, nexus 7, note 2 ,note 10.1, and note 8.0.
I always go for stock based ROMs for stability. For I instal tons of apps that I get issues one after another on custom. I try ROMs after another update after another. This was like a routine which could be enjoyable but annoying sometimes for ur times limited.
With I337, I tried one ROM and I felt no need or urge to flash or even try another. I just could not find flaws or problem with this one.
Which ROM is this?
MDOB!
Bloat free based on stock and has all features I need. Give it a try. Make sure u follow devs guide on installation though for best possible experience!
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
sharpeyedman said:
Let me tell ya I have owned hd2, gs2, gs3, gs4, nexus s , nexus 4,atrix hd,transformer 300tf, galaxy tab 2 7.0 galaxy tab 2 10.1, nexus 7, note 2 ,note 10.1, and note 8.0.
I always go for stock based ROMs for stability. For I instal tons of apps that I get issues one after another on custom. I try ROMs after another update after another. This was like a routine which could be enjoyable but annoying sometimes for ur times limited.
With I337, I tried one ROM and I felt no need or urge to flash or even try another. I just could not find flaws or problem with this one.
Which ROM is this?
MDOB!
Bloat free based on stock and has all features I need. Give it a try. Make sure u follow devs guide on installation though for best possible experience!
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Thank you so much BTW, should've thanked you sooner. Flashed MDOB and have been running it for about four days now. Very stable, has those white stock apps, and is absolutely amazing while also running stock kernel. Thanks so much!
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
I am so glad it has been working great for ya. I really wish other android devices that I use also had ROMs like MDOB.
Those add-ons listed on devs post for MDOB also work great as well for they are usually stock/hidden features. For example, torch light is from hidden stock menu and addon will unlock and enable it for you. Addon like in call recording is not an external third party app but it is like unlocking call recording menu within the stock dial/call pad which comes in very handy and convenient. If you have questions then the dev will try to help you promptly. I had minor issues but it was because I did not know how to use the features on ROM correctly. Of coarse the dev tried to help me find solutions along the way. He' s just a great guy and I feel lucky to have him here on gs4 community.
Sent from my GT-N5110 using xda app-developers app
I'm currently using this one
http://forum.xda-developers.com/showthread.php?t=2356276
Was about to post same question!
Hi there,
Thanks for this thread and the answers. I was searching for exactly this topic.
I would like to try the MDOB ROM, as it sounds like what I am looking for.
The current MDOB ROM is based on the *MF3 firmware. Is this an issue? I am reading about the AT&T bootloader lock and loki fix that was added in to MF3, plus other custom ROMs that list either a broken sound or broken Wi-Fi as a known issue with MF3.
Are these issues fixed in this ROM (and how?) I don't want to loose TWRP and/or WiFi.
Thanks for any clarification,
Gemini420
MDOB is based on the lastest stock MF3 however it would not give u problems that you would face from updating to notorious MF3 stock.
If I am not mistaken you are supposed to have UCUAMDL stock rooted with custom recovery twrp (preferably i337 version listed on the MDOB page) prior to flashing MDOB.
Check out installation or flashing instruction on the MDOB for more info. The dev points to several things you should watch out for. I just followed the guide and my phone has been running pefectly ever since. Well I wish u Good luck.
Edit: Though I never had any issues with custom recovery and wifi, you might wanna ask there and see if such issues exist on MDOB.
Sent from my GT-N5110 using xda app-developers app
sharpeyedman said:
MDOB is based on the lastest stock MF3 however it would not give u problems that you would face from updating to notorious MF3 stock.
If I am not mistaken you are supposed to have UCUAMDL stock rooted with custom recovery twrp (preferably i337 version listed on the MDOB page) prior to flashing MDOB.
Check out installation or flashing instruction on the MDOB for more info. The dev points to several things you should watch out for. I just followed the guide and my phone has been running pefectly ever since. Well I wish u Good luck.
Edit: Though I never had any issues with custom recovery and wifi, you might wanna ask there and see if such issues exist on MDOB.
Sent from my GT-N5110 using xda app-developers app
Click to expand...
Click to collapse
Thanks!
Definitely looking for MDOB by iB4STiD my friend
---------- Post added at 09:50 PM ---------- Previous post was at 09:49 PM ----------
gemini420 said:
Thanks!
Click to expand...
Click to collapse
If you look in the MDOB thread you can flash philz recovery. It's like a super CWM recovery...kinda..sorta lol. That's what iB4STiD recommends.
So are the locked bl folks like myself left behind in the long-term? What needs to happen for there to be more SS ROM development??
Sent from my XT907 using xda app-developers app
zombolt said:
So are the locked bl folks like myself left behind in the long-term? What needs to happen for there to be more SS ROM development??
Sent from my XT907 using xda app-developers app
Click to expand...
Click to collapse
Supposedly, there's a way to make every ROM SS compatible. I think it has to do with removing the boot.img, but I'm sure there's more it than that. I've seen people complain about there being no SS ROMs, then someone mentions this solution, but nobody takes action. Honestly, it's going to be up to someone that has a locked down device to start putting out these SS compatible ROMs.
Then, you will run into kernel issues like we used to run into on the older SS ROMs. Let's say you want CM10.2 that is 4.3 based. Your stock ROM is 4.1.2, so you'll run into kernel issues like an inop camera, WiFi, etc. Honestly, your best bet is to find one of the 2 SS compatible stock ROMs that are the same kernel as you and use Xposed to modify it. There's someone on DroidRzr that used Xposed on his X with a stock ROM and he has been able to load up the custom CM themes.
RikRong said:
Supposedly, there's a way to make every ROM SS compatible. I think it has to do with removing the boot.img, but I'm sure there's more it than that. I've seen people complain about there being no SS ROMs, then someone mentions this solution, but nobody takes action. Honestly, it's going to be up to someone that has a locked down device to start putting out these SS compatible ROMs.
Then, you will run into kernel issues like we used to run into on the older SS ROMs. Let's say you want CM10.2 that is 4.3 based. Your stock ROM is 4.1.2, so you'll run into kernel issues like an inop camera, WiFi, etc. Honestly, your best bet is to find one of the 2 SS compatible stock ROMs that are the same kernel as you and use Xposed to modify it. There's someone on DroidRzr that used Xposed on his X with a stock ROM and he has been able to load up the custom CM themes.
Click to expand...
Click to collapse
Yeah... It can't be that hard - all the other motos have SS CMs out. Just gotta have someone with the knowledge and need/want to make it happen
Sent from my XT907 using Tapatalk
You'd probably have to cook up a kexec kernel to get the newer ROMs functioning properly...
Sent from my XT907 using xda app-developers app
miui rom
[ROM] MIUI v5 is this rom for ss or cwm?
virusalone said:
[ROM] MIUI v5 is this rom for ss or cwm?
Click to expand...
Click to collapse
Unlocked only
Sent from my Nexus 7 using Tapatalk 4
Hey guys. GOt my AT&T s4 here. first one i got couple weeks ago got the MK2 OTA and downloaded just fine, never got TWRP thru GooManager or CWM thru ROM Manager to work n install a recovery. SafeStrap is the only thing i had gotten working. Phone ended up getting wet, switched the board inside with that from a slightly older s4. this one came with the MDL firmware. However this time TWRP thru GooManager worked. So i installed couple other recoveries that wouldnt work before, one with Auto-Loki feature and the other was SafeStrap. With SafeStrap i installed two versions of CM11, none of which got beyond a black screen. Also i have little to no signal since dealing with MDL. Tried to update to MK2, but this time i get a reboot 2 my custom recovery followed by Status 7 error. I am interested in trying out a CM11 ROM, as well as maybe one or two TouchWiz ROMS. Mainly CM, really love the Torch app. What do i need 2 do in general to accomplish this? Ive got ODIN, pretty sufficient experience rooting and modding phones,so not a completely dummy here. Was wondering if i maybe needed to flash a kernel to get those CM ROMS working. any guidance is extremely appreciated.
You were trying to use SS. If you would read, you would know that only 4.2.2 TW and GPE ROMs work with SS unless you have the latest SS, but then again no AOSP, AOSP, CM or MIUI will work. Since the new board is able to have a custom recovery because it is pre MF3, use that to flash those types of ROMs .the error 7 is because you tried to OTA update with a custom recovery. Can't do it.
You say you are not a noob, but I disagree. Every concern you have mentioned is on the first page of both the QA section and general section. Read before you brick.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Welcome to the note 3 forums. We welcome you as long as you do your job and search before making 1,000,000 new threads.
So,You just got your shiny new note 3 and dont know where to begin?
Well that's ok because, this is the all in one thread.
Lets begin​
How do I Root?
That is the common question around here. Im going to simplify this.. Here you go
For 4.3
1.The best and safest way is this method by @evilpotatoman. It does require a little work but in return you do get root Here is the link for That,
2.Another method that is faster, but does not offer busybox with install, nor did it originate from XDA-forums is Here,
For 4.4 Or KitKat
You have to Go to My thread located
Here,
This does root KitKat and provides a custom ROM.
How Do I Install Custom Rom's
First What you should know is that our phone has a locked bootloader. This means that we can not boot kernels. But we still can flash custom rom's Thanks to @Hashcode
To install custom rom's on 4.3, Head over Here,
Another method That i originally created, but does not work as good as safestrap, could be found Here
If you are on KitKat, Then you could either install my KitKat rom or wait for safestrap to be updated.
What Do I Do If I Bricked My Phone? Or if it wont boot?
Well There are 2 methods to get you back to stock and running again.
To Restore back to Jellybean (4.3) Follow this Thread Here
To Restore back to KitKat (4.4.2) Follow this Thread Here
Why are Rom's Based off different Bases & Whats the difference?
A little basic intro
MJ5,MI9 & MI1 Are all 4.3 AT&T Bases
Ml2 Is an international 4.3 Base
MlG is a leaked AT&T 4.4.2 Base
Mj5 Is the latest 4.3 AT&T Base
Ml2 Is the latest international Base
The difference depends on what you need. Right now There are pro's and con's to all bases
Mj5
-Fast Data speeds
-Better indoor Signal
-No Bluetooth internet tethering
Ml2
-NO group messaging
-lower signal in areas
-slower data
-Does have Bluetooth internet tethering
Leaked Kitkat base (MIG)
-Extremely fast
-Newer modem with better signal & speeds
-Safestrap is not yet updated to work with kitkat (But you could still install my 4.4 ROM)
Why is my GPS Crappy and How do i fix it?
This issue is well known with our phone. The main reason is bad software coding.
To fix this issue Flash this fix made by me, in safestrap or manually push the files using root explorer.
4.3-Click Here
4.4-(Coming Soon)
What is "SafeStrap & Why do i have to use it?
Safestrap is our main method of flashing Rom's and could be found Here,
Always WIPE before flashing a new ROM or expect to receive errors. DON'T BE LAZY
Issues with safestrap
-Sometimes the storage is messed up and shows that you are using all your memory, when you really are not.If you use a different app to check, then you should see your real memory usage.
Where are all the kernels located?
Like i stated earlier, We don't have kernels yet, because of our locked bootloader
Where are all the Roms compatible with my phone?
All compatible and ready to install rom's could be found Here
There is currently NO AOSP,CM Based Rom's, So don't ask
What is KNOX and how does it effect me?
KNOX is basically made to **** us. But Samsung calls it security.
KNOX is removed from most custom Rom's. Knox does prevent root apps from working properly and should be removed asap.
How do I transfer My bookmarks from ROM to ROM?
Follow the guide i created Here
Im still working on a list of roms,and cool mods that are compatible with our phone. they will be located in the second post.Mods please sticky this thread​
For me, to post mods and roms compatible with our phone
one more
Great information.
Thank you very much.
I have tried your KitKat 4.4.2. Glad to see it is rooted!
Now, it is easy to switch between MJ5 4.3 and MLG 4.4.2 through SafeStrap and Odin.
Wow very nice! Hopefully this will prove helpful.
Sent from my SM-P600 using Tapatalk
I will send people here. Thanks man. Wish we could donate to you. I bet there is a bunch of people who would love to buy you some drinks or whatever your in to....Thanks again for being organized and detailed. You have your Sh** together and its great!!!
Awesome work. Me personally Im waiting for SS to be updated but definitely keeping an eye out.
Im curious on one thing. When you discuss Knox and to 'remove it', would freezing this via TB server the same purpose? Also since youve had a go with 4.4, does Samsungs iteration of 4.4 still have the GPS issues or did they fix it? Just curious
Thanks!
Guys where can I get the stock rom my N900A (Note 3 AT & T) now install version 4.4.2 filtered want to go back to stock!
Enviado desde mi SAMSUNG-SM-N900A mediante Tapatalk
Read the first post!!
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
Thank you love your rom and glad to see you are so involved in the community
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
No problem buddy
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
hi, how do i manually fix push the GPS files?
So no root for sm900a. How can I load a custom rom without having to use a computer? Possible?
I really hate this thing as of right now wish I had my note 2 back
I found Ultimate rotation control but it fails to work properly
thanks, perfect thread for an android newbie :good:
Nix A Nerd 2 said:
So no root for sm900a. How can I load a custom rom without having to use a computer? Possible?
I really hate this thing as of right now wish I had my note 2 back
I found Ultimate rotation control but it fails to work properly
Click to expand...
Click to collapse
If you are referring to the N900A, thew is root! Just gotta search.
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
Thank you. Now my almost $800 Samsung Galaxy note 3 has basic gps working properly. Samsung needs to hire guys like you
only thing missing is how to back up and restore...
so if you want a new rom...youre good to go..
Wanting to down grade back to JB rom from KITKAT v2
I Used to be on JB rom 4.3 And I really liked it. But I wanted to upgrade to to KitKat v2 because alot of people said they liked it. After I upgraded to KITKAT 4.4.2 I really did not enjoy it as much JB 2.6. I used to get 35000 score from Antutu Benchmark but now on V2 I get about 30000 score. And I thought the JB 2.6 was setup nicer. I dunno, but what I do know is that I would like to go back to JB 2.6 because I think it was a nicer piece of work. Anyone know where I can find the tutorial to downgrade back to JB 2.6? I thought I seen it before but I cant seem to find it. Thank you for your time.
htsl
I have now soft bricked my phone I am lost and need help! no one last night would help me! PLEASE help me now!!! I am stuck on step 4 of http://forum.xda-developers.com/show....php?t=2559715
when I select "show all devices" it only list 2 "Samsung mobile usb cdc composite device" and " samsung mobile usb modem" what am I doing wrong????
some one on another thread said I am using the wrong drivers... where Do I find the correct drivers?
Thanks
Rick
Are you in download mode?
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
Hi, I've been trying to install a custom rom (at this point ANY custom rom) on my friend's phone. I have worked on several phones before, including my own sprint GS3, but this is my first time trying to work around a locked bootloader, and BOY is it a pain, haha. I'm no dev, but I would like to think that I'm pretty competent.
First a few things to note, are that the phone is currently on NI1 (Been too much of a sissy to go to NJ4 in case it screws something up, I don't even know why), it is the 16Gb version, I am using an external sd card to flash everything, and yes I am flashing loki-doki after everything.
So what I've done so far is:
- Try to install TWRP
- Find out that won't work and finally figure out I need safestrap
- Successfully install safestrap after using towelroot by ODIN-ing the NC1 kernel then going back to the NI1 kernel
- Try to flash Resurrection Remix and KToonsez kernel using a new rom-slot, and wind up soft-bricking (stuck on bootloader screen, can get to download mode)
- ODIN NB1 tar then ODIN NI1 update
- Repeat the last few steps several times because I'm too idiotic to realize that it JUST ISN'T GOING TO WORK!
- Finally find a reference to flashing the ATT kernel modules after the rom. That got me past the soft brick and safestrap screen, but I don't even see a boot animation
As of right now my sequence to successfully not soft-bricking (what an accomplishment) is to flash the rom>gapps>ATT kernel module>supersu>loki-doki>wipe dalvik/cache
Now, is it worth it having already spend a good 7 hours, just to get a custom rom? Of course not, it's not my phone and my friend isn't picky. He'd be just fine with rooted TW. However, It kills me that I don't know what's going on, so here I am lol.
TL;DR: Phone has safestrap, is rooted, but any time I flash a rom it gets past the boot loader/safestrap screen and never shows a boot animation, or anything past that. Can anyone help figure out what's going on please?
Thanks in advance.
You can only flash touch wiz based roms with safestrap and you can't flash kernels with safestrap. That's been your problem with soft bricking.
Edit, see this for roms you can flash http://forum.xda-developers.com/showthread.php?p=53758227
Sent from my Nexus 9 using XDA Free mobile app
http://forum.xda-developers.com/showthread.php?t=2616221
Thanks guys. I thought I read through the whole thread, but there is so much information, it's pretty scattered, I must have missed the thing about only TW roms working.
Now a few more questions:
1) Is it worth updating to NJ4? The phone is new and doesn't have any app data or anything that would be missed by updating. I see quite a few roms in 4.4.4, but it looks like most of them are AOSP based, which leads me to my next question...
2) Is there a way to get AOSP roms to work? I see all of these AOSP based roms, obviously for this phone, but it would be pointless to make them if they don't work.
Masterjuggler said:
Thanks guys. I thought I read through the whole thread, but there is so much information, it's pretty scattered, I must have missed the thing about only TW roms working.
Now a few more questions:
1) Is it worth updating to NJ4? The phone is new and doesn't have any app data or anything that would be missed by updating. I see quite a few roms in 4.4.4, but it looks like most of them are AOSP based, which leads me to my next question...
2) Is there a way to get AOSP roms to work? I see all of these AOSP based roms, obviously for this phone, but it would be pointless to make them if they don't work.
Click to expand...
Click to collapse
It wouldn't hurt to update to nj4. But it's not going to help you either. Only phones on mdb or mdl bootloader can flash non touch wiz based roms using loki. And you can't go back to those bootloaders
Sent from my Nexus 9 using XDA Free mobile app
Alright then. Hyperdrive looks pretty good, I'll try that along with Ktoonsez kernel. I'll report back later to let you know how it goes. Thanks again!
Masterjuggler said:
Alright then. Hyperdrive looks pretty good, I'll try that along with Ktoonsez kernel. I'll report back later to let you know how it goes. Thanks again!
Click to expand...
Click to collapse
Again, you can't flash a kernel in safestrap
Sent from my Nexus 9 using XDA Free mobile app
Oh, I get it now. That didn't quite register before. So just to confirm, after I flash the rom (which already has its own custom kernel included), I still need to flash the stock ATT kernel, correct?
Flash the rom, super su, and the att module for your base. Hyperdrive is a very good rom, good luck. Also the rom doesn't include a kernel, your original kernel stays put. That's why only tw roms work, because your new rom has to be compatible with the kernel already on your phone.
Just reporting in, I now have the phone up and running using Hyperdrive Rom. Thanks for the help!
I actually had a problem where it would not shut down correctly, but found out it was because I was installing the rom in a rom-slot in safestrap. As soon as I tried the stock rom slot, it worked flawlessly.