Database Users

[Q] Clarification Needed

Hey guys. GOt my AT&T s4 here. first one i got couple weeks ago got the MK2 OTA and downloaded just fine, never got TWRP thru GooManager or CWM thru ROM Manager to work n install a recovery. SafeStrap is the only thing i had gotten working. Phone ended up getting wet, switched the board inside with that from a slightly older s4. this one came with the MDL firmware. However this time TWRP thru GooManager worked. So i installed couple other recoveries that wouldnt work before, one with Auto-Loki feature and the other was SafeStrap. With SafeStrap i installed two versions of CM11, none of which got beyond a black screen. Also i have little to no signal since dealing with MDL. Tried to update to MK2, but this time i get a reboot 2 my custom recovery followed by Status 7 error. I am interested in trying out a CM11 ROM, as well as maybe one or two TouchWiz ROMS. Mainly CM, really love the Torch app. What do i need 2 do in general to accomplish this? Ive got ODIN, pretty sufficient experience rooting and modding phones,so not a completely dummy here. Was wondering if i maybe needed to flash a kernel to get those CM ROMS working. any guidance is extremely appreciated.

You were trying to use SS. If you would read, you would know that only 4.2.2 TW and GPE ROMs work with SS unless you have the latest SS, but then again no AOSP, AOSP, CM or MIUI will work. Since the new board is able to have a custom recovery because it is pre MF3, use that to flash those types of ROMs .the error 7 is because you tried to OTA update with a custom recovery. Can't do it.
You say you are not a noob, but I disagree. Every concern you have mentioned is on the first page of both the QA section and general section. Read before you brick.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app

Flash ROM & some crazy nintendo graphics

Hi guys, I'm wondering if anyone can shed some light on a few things for me.
I have an ATT SGH i-337 MK2 with SafeStrap 3.71
Today I tried to flash PAC ROM and Dirty Unicorn into ROM Slot-1, and upon reboot when the ROM's logo should appear the whole screen just looked like when a nintendo cartridge isn't working. It was just a few crazy colors with some blocks and lines here and there.
Then I tried AOKP with it's Loki'd Kernel being part of the ROM. The nintendo screen came back again, but then the AOKP logo popped up clear as day for a second. Then went back to the lines and colors.
So could this be a problem with Safestrap compatibility? If so, how can I uninstall it? (I did read the dev's thread, and it just says use .APK and IDK what that means)
Or could it be that I also need to use Loki Doki with the other two? (Didn't see anything about that in PAC or DU threads)
Thanks!

Same issues apon using The Samsung Galaxy S4 for Verizon (jfltevzw) Build MK2 rooted using vRoot (English) and using safestrap. if needed I can upload the safestrap apk or version. If I install any type of AOSP ROM the boot logo is either missng or baby blue with wierd static lines. AOKP is the only AOSP ROM that eventually boots (with static boot logo) but no wireless works, and this is the same wether MK2 and/or MJ7 modules are installed or not. the only rom I can successfuly install and use daily that has no bootloader based issues is Hyperdrive ROM For jfltevzw & jflteatt. Any info would be much apreciated!
Sent from my SCH-I545 using xda app-developers app

^ Interesting. I didn't expect anyone else to have this issue. I never read about it before. I really feel like it has something to do with SafeStrap.

Heath Cliff said:
Hi guys, I'm wondering if anyone can shed some light on a few things for me.
I have an ATT SGH i-337 MK2 with SafeStrap 3.71
Today I tried to flash PAC ROM and Dirty Unicorn into ROM Slot-1, and upon reboot when the ROM's logo should appear the whole screen just looked like when a nintendo cartridge isn't working. It was just a few crazy colors with some blocks and lines here and there.
Then I tried AOKP with it's Loki'd Kernel being part of the ROM. The nintendo screen came back again, but then the AOKP logo popped up clear as day for a second. Then went back to the lines and colors.
So could this be a problem with Safestrap compatibility? If so, how can I uninstall it? (I did read the dev's thread, and it just says use .APK and IDK what that means)
Or could it be that I also need to use Loki Doki with the other two? (Didn't see anything about that in PAC or DU threads)
Thanks!
Click to expand...
Click to collapse
If you would have read 1st, then you would know that you can NOT flash any non TW rom on MK2. This is stated over & over on XDA. Safestrap is NOT the problem it is a Godsend from Hashcode for us to be able to flash custom roms onto our locked boot loader devices. Please read before flashing, bricking & then bashing the developers. Follow the directions posted on how to restore your phone, or better yet make a trip to Best Buy & they'll do it for you. Good Luck.

REEEEEEAAAAADDDD!!!!
It's been very well documented that AOSP does not work with safestrap. Neither does loki. There currently is no way/fix to flash AOSP.
So
1. No AOSP or GPE
2. No loki
3. No flashing custom kernels
Sent from my GT-I9505 using Tapatalk

John The Rhino said:
If you would have read 1st, then you would know that you can NOT flash any non TW rom on MK2. This is stated over & over on XDA. Safestrap is NOT the problem it is a Godsend from Hashcode for us to be able to flash custom roms onto our locked boot loader devices. Please read before flashing, bricking & then bashing the developers. Follow the directions posted on how to restore your phone, or better yet make a trip to Best Buy & they'll do it for you. Good Luck.
Click to expand...
Click to collapse
I did read first. I've been reading this forum for quite a while actually. But there is so much information it's hard to keep it all straight. This ATT stuff is a lot different then my VZW Razr was. That phone was just flash and forget. There are so many different ROM's for this phone now that are 4.3 or KitKat I guess I just didn't realize that, that Android version came with the ROM and was originally something more mod-able stock.
Any way I wasn't bashing SS or Hashcode. I clearly said "compatibility issue" i.e. some programs just don't play well together hence the existence of compatibility mode, virtual machines, and x86 processors. So maybe you should read before bashing novice community members and making yourself look like a big asshole.
And I don't need best buy to fix anything I have a NANDroid, backup on Kies3, and Google+. Besides, I did all of this flashing I on a separate partition so the stock ROM was never altered. Thanks for absolutely nothing at all.
For anyone else that feels like they can move on with me, I would really like to try to install TWRP in place of SS. I'd appreciate any help with how to go about doing that. TIA

Heath Cliff said:
I did read first. I've been reading this forum for quite a while actually. But there is so much information it's hard to keep it all straight. This ATT stuff is a lot different then my VZW Razr was. That phone was just flash and forget. There are so many different ROM's for this phone now that are 4.3 or KitKat I guess I just didn't realize that, that Android version came with the ROM and was originally something more mod-able stock.
Any way I wasn't bashing SS or Hashcode. I clearly said "compatibility issue" i.e. some programs just don't play well together hence the existence of compatibility mode, virtual machines, and x86 processors. So maybe you should read before bashing novice community members and making yourself look like a big asshole.
And I don't need best buy to fix anything I have a NANDroid, backup on Kies3, and Google+. Besides, I did all of this flashing I on a separate partition so the stock ROM was never altered. Thanks for absolutely nothing at all.
For anyone else that feels like they can move on with me, I would really like to try to install TWRP in place of SS. I'd appreciate any help with how to go about doing that. TIA
Click to expand...
Click to collapse
Well stating Safestrap may have a compatibility issue is offensive to the developer, especially since you did not read the instructions or posts from other members who did as you. If you would follow the directions it's perfect. I have 4 different roms on my phone + stock to choose from! How cool is that? I understand the overwhelming urge to flash a rom, as I too have been flashing on my Skyrocket since the factory warranty expired last year, and flashing roms is a breeze on that device. However, this S4 is more complicated since the introduction of the KNOX & the LOCKED boot loader. These phones are expensive so unless you really want a $700.00 brick, read, read some more, then read it all again. Safestrap uses TWRP to flash the roms, but TWRP alone is not compatible with MK2 nor is CWM. If you want to flash roms on your ATT MK2 S4 Safestrap is the only way to do that at this writing.

John The Rhino said:
Well stating Safestrap may have a compatibility issue is offensive to the developer, especially since you did not read the instructions or posts from other members who did as you. If you would follow the directions it's perfect. I have 4 different roms on my phone + stock to choose from! How cool is that? I understand the overwhelming urge to flash a rom, as I too have been flashing on my Skyrocket since the factory warranty expired last year, and flashing roms is a breeze on that device. However, this S4 is more complicated since the introduction of the KNOX & the LOCKED boot loader. These phones are expensive so unless you really want a $700.00 brick, read, read some more, then read it all again. Safestrap uses TWRP to flash the roms, but TWRP alone is not compatible with MK2 nor is CWM. If you want to flash roms on your ATT MK2 S4 Safestrap is the only way to do that at this writing.
Click to expand...
Click to collapse
Okay, well thank you for that. I just see so many ATT S4's in here with other ROMs and Recoverys I thought I could get something to happen. Anyway, sorry for the poor thread and response. I appreciate the plain blunt fact that SS and the ROMs that work with it are my choices for now. And don't worry about me. The worst that I'd probably get is a soft brick and I've recovered from that before Thanks again

Heath Cliff said:
Okay, well thank you for that. I just see so many ATT S4's in here with other ROMs and Recoverys I thought I could get something to happen. Anyway, sorry for the poor thread and response. I appreciate the plain blunt fact that SS and the ROMs that work with it are my choices for now. And don't worry about me. The worst that I'd probably get is a soft brick and I've recovered from that before Thanks again
Click to expand...
Click to collapse
Hey man I totally understand. It's hard to watch all these other roms pop up for the original S4 & we can't flash them. But we no longer have to suffer with only the stock rom option since Hashcode's brilliant Safestrap was released. Once you get use to it, the ability of being able to multi-boot roms really kind of makes up for the locked boot loader. Soon though, we will have 4.4 Kit Kat & then we can start this process of getting off the stock rom all over again. Right? It could be worse, we could have I-phones. We do have a ever growing number of great custom TW based roms available to us here for our device. So try them, you'll be surprised how much better your phone performs. Glad I made sense & forgive my bluntness that's just how us Rhinos roll.

[Q] Verizon galaxy note 3 om Toubles!

Hi guys, I have a question regarding some roming stuff with the verizon version of the galaxy note 3. I am not new to roms by any means and I have been searching frantically to find one place with the complete answer im looking for. I made the early mistake of taking the OTA upgrade for KK, therefore I am currently running 4.4.2 with the NC4 build and NC4 baseband. Now while i have easily rooted my phone at this point with the towelroot. I also have had no problem getting the new 3.72 safestrap installed and running on my phone. My question now at this point is trying to figure out my next step with a new ROM I am trying install....I have been looking at all of my info to get the Hyperdrive ROM installed and I cant seem to find all the info I need in one location. Can I or can I not flash a new ROM to the NC4 baseband? I have seen some information where some people say I might be able to flash the NC2 kernal using ODIN and others say just trying to flash any ROM in general creates a black screen in which a battery pull needs to be done...yada yada.....? So in short, am I able to flash a ROM to the note 3 at this point or am I S.O.L?

sickorsane1 said:
Hi guys, I have a question regarding some roming stuff with the verizon version of the galaxy note 3. I am not new to roms by any means and I have been searching frantically to find one place with the complete answer im looking for. I made the early mistake of taking the OTA upgrade for KK, therefore I am currently running 4.4.2 with the NC4 build and NC4 baseband. Now while i have easily rooted my phone at this point with the towelroot. I also have had no problem getting the new 3.72 safestrap installed and running on my phone. My question now at this point is trying to figure out my next step with a new ROM I am trying install....I have been looking at all of my info to get the Hyperdrive ROM installed and I cant seem to find all the info I need in one location. Can I or can I not flash a new ROM to the NC4 baseband? I have seen some information where some people say I might be able to flash the NC2 kernal using ODIN and others say just trying to flash any ROM in general creates a black screen in which a battery pull needs to be done...yada yada.....? So in short, am I able to flash a ROM to the note 3 at this point or am I S.O.L?
Click to expand...
Click to collapse
Yes you can!! As long as the rom says that they support it you can. It says right here in red on the hyperdrive op-" This Rom is able to be installed on the Verizon Galaxy Note 3 On KitKat Bootloader with KK Safestrap" so make a backup with safestrap and try it out! And since it doesn't say anything about what specific one to use (I see what you are talking about) you won't have any harm with a backup. By the way the reason why a lot of roms were/are based on NC2 was because it was way more leniant than NC4 but now most if not all roms will support it. Just read the op.
Sent from my GalaxyAwesome

K03WL3R said:
Yes you can!! As long as the rom says that they support it you can. It says right here in red on the hyperdrive op-" This Rom is able to be installed on the Verizon Galaxy Note 3 On KitKat Bootloader with KK Safestrap" so make a backup with safestrap and try it out! And since it doesn't say anything about what specific one to use (I see what you are talking about) you won't have any harm with a backup. By the way the reason why a lot of roms were/are based on NC2 was because it was way more leniant than NC4 but now most if not all roms will support it. Just read the op.
Sent from my GalaxyAwesome
Click to expand...
Click to collapse
Hmmm....well I tried to do the jasmine rom and I seem to have had the same problem that quite a few people are having. I put it in slot 1, created the rom slot and such, reboots into the recovery mode on ss just fine but then it goes to a black screen as if it's off. Have to battery pull. Maybe gonna try a different rom and see where I end up.

I'm running JasmineRom on the stock slot, but I also have the NC2 kernel..
Sent from my GalaxyAwesome

K03WL3R said:
I'm running JasmineRom on the stock slot, but I also have the NC2 kernel..
Sent from my GalaxyAwesome
Click to expand...
Click to collapse
Should I try stock slot then? I used slot 1 with 3.75

You could try that (I would), or just flash the Nc2 stuff, then boot up (on stock), boot back to recovery and flash JasmineRom on stock. Those steps are just what I did and it worked for me. I'm really sorry but for the life of me that's the best I can remember about what I did. If none of that works, I'll try to install Jasmine onto a rom slot when I can.
Sent from my GalaxyAwesome

K03WL3R said:
You could try that (I would), or just flash the Nc2 stuff, then boot up (on stock), boot back to recovery and flash JasmineRom on stock. Those steps are just what I did and it worked for me. I'm really sorry but for the life of me that's the best I can remember about what I did. If none of that works, I'll try to install Jasmine onto a rom slot when I can.
Sent from my GalaxyAwesome
Click to expand...
Click to collapse
I flashed Nc2 from a post on here and still didn't work....I'm about to give up

Have you tried just making a backup and starting over from fresh stock?
Sent from my GalaxyAwesome
---------- Post added at 11:35 PM ---------- Previous post was at 11:27 PM ----------
Also ask here- http://forum.xda-developers.com/showthread.php?t=2780031
Sent from my GalaxyAwesome

You need to flash the rom after you've wiped everything, then reboot to download mode and install the unified firmware via odin. That should work.
Sent from my GalaxyAwesome

K03WL3R said:
You need to flash the rom after you've wiped everything, then reboot to download mode and install the unified firmware via odin. That should work.
Sent from my GalaxyAwesome
Click to expand...
Click to collapse
That did not work as that was the original plan of action. Only to come to a nice black screen

Okay, the dev just posted instructions in his last post on the JasmineRom thread. Check it out, it took me a while for it to work on my phone, it seems like a couple people are like us too.. Just a mix of trial and error
Sent from my GalaxyAwesome
Edit: and sorry I couldn't help so far, I don't really want to go back to stock considering this is my daily and I need a bigger sd card to make a full backup. [emoji53]

K03WL3R said:
Okay, the dev just posted instructions in his last post on the JasmineRom thread. Check it out, it took me a while for it to work on my phone, it seems like a couple people are like us too.. Just a mix of trial and error
Sent from my GalaxyAwesome
Edit: and sorry I couldn't help so far, I don't really want to go back to stock considering this is my daily and I need a bigger sd card to make a full backup. [emoji53]
Click to expand...
Click to collapse
All good! I finally got it working thanks to you saying the dev mentioned something! Jasmine up and running with no issues!

Jasmine V2
I never sign up for web sites but the Jasmine Rom is just so good I had to say thanks. Also concerning the excess power usage, I noticed that when plugged into AC charger the Android OS goes from 40% down to the 20's. Hope it helps. Again thanks to hsbadr for being a great DEV.
PS: K03WL3R I see you helping on hsbadr's forum, please convey my thanks and suggestion to him, for as I am a new member I can not post on his forum.
Thanks

Sorry it took me so long, there's an open discussion in the general/help section for jasminerom! I'm pretty sure new users can post there?

[Q] Can't get custom rom to load after install, keeps loading stock image

Thanks in advance to anyone who can help. I am new to this custom ROM stuff and am trying my best to follow all the guides, but I have no idea what I'm doing wrong.
I have a Samsung Galaxy S4. Android version 4.4.2 and Build version KOT49H.I337UCUFNC1, so I've been following the NC1 guides. I was able to successfully root using towelroot and verified that it worked using a root checker app. I then installed SafeStrap, backed up my stock image, and put two different custom ROMs on my external microSD card, Graviton (http://forum.xda-developers.com/showthread.php?t=2372742) and PurifieD (http://forum.xda-developers.com/showthread.php?t=2454205). After creating another ROM slot, and performing a factory wipe using SafeStrap, I installed Graviton and it went through and told me to reboot. However, when the phone loaded again, it looked just like the stock ROM again. So I wiped everything again and did the same with PurifieD. It gave me all the installation options of what bloatware I wanna get rid of, etc and also seemed to install successfully. But once again, when I rebooted after installation, it looked just like stock again.
Am i doing something wrong? I really want to use these nice looking ROMs!!
And if I can get that to work, it seems like I have no 4G connection, even though WiFi works. I'm assuming http://forum.xda-developers.com/showpost.php?p=50965837 is the guide I will want to be looking at to make it work?
Thanks for the help

I assume they are based on GNG8 AND GNG1 and you are running FNC1.
The rom based on stockrom is important too.
I suppose you downloaded Purified HD's v3.3? Because it is based on FNC1.
Try roms made specifically for your device to avoid problems and bricking. Experimenting without knowledge is also not supported here. Plus people are not responsible here for bricked devices or any weird thing that happens.
Towelroot worked for your phone as it is a universal app, made for S5 by the great @geohot, but works for many devices.
EDIT : Well I totally missed the i337 part. Thank you @Lennyz1988.
Sent from my Ozcan GT-i9500 using XDA mobile app

You need to read more carefully.
You have a I337 model. NOT an I9505 or an I9500. You can't flash other roms to your device. Stick to your model only the AT&T. Try what DeepankarS tells you.From what I remember your stock rom needs to be the same as the rom you are trying to flash.

Thanks for the assistance fellas. And yeah, knowing that I was looking in the wrong threads would have been a better start and I'm lucky I didn't permanently damage my phone. Thanks again for the heads up.

eeric248 said:
Thanks for the assistance fellas. And yeah, knowing that I was looking in the wrong threads would have been a better start and I'm lucky I didn't permanently damage my phone. Thanks again for the heads up.
Click to expand...
Click to collapse
Anytime. But you can always port roms to your phone. There are a lot many ways to port a rom for your phone
*A bit of perfect copy paste skills required for that
Sent from my GT-I9500 using XDA Free mobile app

Tried two roms, getting the 'com.android.phone' has stopped responding (immediately)

I've tried Paranoid Android 4.6 and CM 11, both with the same result.
I could not get any custom bootloader to install, aside from safestrap. This seems to be on there ok now, and I can install PA or CM roms from my sd card.
When they are finished installing though (along with Gapps), when it boots into the OS I instantly get the popup telling me the process com.android.phone has stopped. I hit ok and it comes back immediately, no matter how many times I hit it. I can't get into the menus or setup screens, the popup comes back instantly.
Since PA and CM both did this same thing, I am guessing my problem is perhaps not the rom. Any ideas please on what I might try next? The phone is basically bricked at this point.

Taymar said:
I've tried Paranoid Android 4.6 and CM 11, both with the same result.
I could not get any custom bootloader to install, aside from safestrap. This seems to be on there ok now, and I can install PA or CM roms from my sd card.
When they are finished installing though (along with Gapps), when it boots into the OS I instantly get the popup telling me the process com.android.phone has stopped. I hit ok and it comes back immediately, no matter how many times I hit it. I can't get into the menus or setup screens, the popup comes back instantly.
Since PA and CM both did this same thing, I am guessing my problem is perhaps not the rom. Any ideas please on what I might try next? The phone is basically bricked at this point.
Click to expand...
Click to collapse
Yea, you can't flash cm or pa on your device. They can only be flashed on devices with the mdb or mdl bootloader. If you're using safestrap, and it's the only recovery you can use, you're probably on 4.4.4, nb1 or nc1 or nj4, bootloader. You'll need tw based roms. See the ones that work with safestrap.
Sent from my Nexus 9 using XDA Free mobile app

Thank you,
I flashed to NJ4 after rooting. Could you recommend any custom rom that is tw based please, or am I basically limited to stock?
I tried flashing a new TW rom but now I'm stuck in a recovery mode bootloop (safestrap seems to be gone).
edit: tw = touchwiz? (Sorry, I'm new at this).
Really appreciate the explanation, thanks again.

Taymar said:
Thank you,
I flashed to NJ4 after rooting. Could you recommend any custom rom that is tw based please, or am I basically limited to stock?
I tried flashing a new TW rom but now I'm stuck in a recovery mode bootloop (safestrap seems to be gone).
edit: tw = touchwiz? (Sorry, I'm new at this).
Really appreciate the explanation, thanks again.
Click to expand...
Click to collapse
Your stuck to 4.4.4 unless you do the method mentioned on the forums and GoldenEye comments.
But a caution its not for the new, is risky and you lose the safestrap recovery boot because safestrap is not lollipop compatible right now.

Got it. Thank you.
I finally found a 'stock' firmware that I managed to load via Odin. Looks like AT&T just pushed the lollopop update to my phone as well so I guess stock lollipop will work for me until I upgrade my phone.
Out of interest, I'm looking at the oneplus one phone. Am I correct in thinking I should have way less problems trying to root & install custom roms on that, since it comes loaded with CM and the carrier isn't going to be constantly fixing exploits that allow root?
Really appreciate the help guys, thanks again.

Taymar said:
Got it. Thank you.
I finally found a 'stock' firmware that I managed to load via Odin. Looks like AT&T just pushed the lollopop update to my phone as well so I guess stock lollipop will work for me until I upgrade my phone.
Out of interest, I'm looking at the oneplus one phone. Am I correct in thinking I should have way less problems trying to root & install custom roms on that, since it comes loaded with CM and the carrier isn't going to be constantly fixing exploits that allow root?
Really appreciate the help guys, thanks again.
Click to expand...
Click to collapse
I don't own it so I couldn't tell you but I would look up the forum for it before hand and see what they say about it.
If it's not an ATT and Verizon phone most likely it's not boot loader locked.

Taymar said:
Got it. Thank you.
I finally found a 'stock' firmware that I managed to load via Odin. Looks like AT&T just pushed the lollopop update to my phone as well so I guess stock lollipop will work for me until I upgrade my phone.
Out of interest, I'm looking at the oneplus one phone. Am I correct in thinking I should have way less problems trying to root & install custom roms on that, since it comes loaded with CM and the carrier isn't going to be constantly fixing exploits that allow root?
Really appreciate the help guys, thanks again.
Click to expand...
Click to collapse
Oneplus you will be able to root and recovery, I believe even unlock the bootloader. You just have to pay full price of the phone of course, but it's separate from carrier so no root patching OTAs.

Awesome. Thank you so much guys. I think I'm going to try out the oneplus one. Sounds like it'll be a lot more straightforward than with AT&T's devices.