Chuwi Vi8 problem
i have Chuwi Vi8 Win8.1 first its working good bus after upgrading to Window 10 its touch screen not working properly so is make a full reset but at 66% resetting its stuck so i power off and again power on but now its not booting window now when i try to reset agian its showing error.
so please can any body help me how can i reset it or how can i reinstall Win8.1 or reinstall its firmware now what i have to do
You can use Bootable disc installer, if know someone has windows 10, you can ask him to create windows 10 installer using media creation tool
Related
I succesfully downgraded my shift to XPe. All worked fine for many days.
I replaced boot.bmp in windows directory to overwrite common windows boot logo.
After reboot I forget an USB stick (probably with active partition) inserted in USB port ... and I suddenly removed it after bios screen... from that moment XP refuses to start and blocks itself before loading boot screen.
I removed USB stick, tried to load bios default etc etc... no luck.
How can I do ? Can the HD be failed ? How can I do to know for sure ?
Perhaps booting with WINPe ?
Any advice much appreciated. Best regards.
F.
Trying to get this tablet to work after being stuck in android boot loop. and nothing seems to have any effect. Friend needs it for their school and want to get this running again.
Downloaded a few updates and tried them all to different results but no matter what after the tablet reboots it goes to acer boot logo.
I have read around and seem to be have to use apx mode to recover it but when trying to run pbj2.0 tdv4 rollback rom i get this error message. "Your operating system isn't compatible with the upgrade application. Please download .NET Framework 2.0 or above from Microsoft website." The thing is .net 2.0 is installed and verifies using the .net verification tool.
I an running w8.1 x64 on this pc and w10 x64 on my old laptop but get that same error message on each.
I can get the tablet into apx mode but the a500 manager sees it but complains about drivers which should be installed. It shows up in device manager as APX device but no drivers installed.
Is there any way around this as i dont have access to a pc running win7 or lower. Currently downloading an ubuntu virtual box image to try and get cpuid and sbk.
Any help would be appreciated
Recently for a nuvision windows 10 tablet. Worked ok but since it was give. I hard reset. During the windows install the battery died. When rebooting I got the unexpected error cannot process restart loop. I worked my way around that and now the installation got to 64% and just restarts. I have tried booting from usb and it errors. Ive tried downloading the tablets software and a regular windows 10 iso both 64 and 32 bit. Nothing works. Any help? I would like to use this for my kid.
In response to another post, I followed the instructions to root and install a ROM
https://forum.xda-developers.com/fire-hd/general/2017-root-kindle-fire-hd-6-4th-gen-t3677600/page2
I got to the last part and rebooted to Fire OS .. then ...
Black Screen - no boot screen.
MT65XX Preloader appearing and disappearing, and not booting to Fastboot or TWRP. Just connecting/disconnecting
This has happened for me and I have tried everything to get it going again. Even bought a factory cable.
Please does someone have a fix for this. Have tried the drivers on Win 7, Win 8 and Win 10 with everycombination of MTK Preloader drivers
Frustrated but dont believe it's 100% dead?
Hi,
I have iBall Slide i701 Windows Tablet which is stuck at boot screen (originally it had Windows 8.1 but I upgraded it to Windows 10). Now, request to please share the step by step guide to reinstall/repair Windows 10 / 8.1 in the tablet.
Thanks,
Vijay Gupta
Hi!
I dont know your device but by default the steps will be:
1 - Find, download and create a boot pendrive with firmware.
2 - need a OTG cable to plug in tablet
3 - Figure it out how to boot from pendrive, maybe a combination of keys like volume up + power, etc.
4 - plug OTG with pendrive in tablet and try to boot on pendrive.
5 - If successful you will able to recover or reinstall firmware.
Will be something like this I guess