Hello everyone, I bought my phone from amazon and its originally from Brazil (its unlocked) BUT now since I'm trying to fix a WiFi issue ( I can't turn it on) , I discovered that the firmwares has the XX code for the region which I made a search for and its for Poland and etc, but deffinately not Brazil, and I live in Bulgaria . I had the UB code (for Brazil) when I was with the KitKat android. And I'm confused now which firmwares should I reflash to try to restore that system file for the WiFi ? Could that cause the problem with the WiFi? I need to say my phone updated by itself I didn't do anything. Thank you
P.S. I'm with 5.0.1. Lollipop all stock firmwares and everything, rooted, Galaxy S4 GT-I9500
Try here. Since you're unlocked, you're not limited to ROMs from a specific region and can flash any package you desire. The one I provided the link to however is the closest one to Bulgaria that apparently does not have carrier branding.
Thank you very much for the fast respond I will try that
Currently running Android's Lolipop 5.0 on my Galaxy Note 3. My phone model is SM-N900s and I was thinking of switching the firmware so that I'd able to use an international firmware. A little back story was that I was living in Korea and moved back to Malaysia. Is there any chance that there is a firmware for me to install or flash into my Note 3 so that I am able to use it without it showing the carrier my phone originally was with. Reason being is because, I'm constantly having an error stating my phone is in roaming when it should not be because I am actually in my home country with my home country's carrier sim card.
Any help or advice..? If you guys could kindly either post a link to where I can refer to or a guide of which I can follow.
Good day
I need your help, I just flashed my Note 3 (SM-N9005) with Lollipop 5.0 from sammobile.com
I used odin to do the flash and it ended up successfully pass. Right now, the phone is running with lollipop but it can't detect any SIM card !!!!??
the build number I flashed is for my country and this is the number
N9005XXUGBOEA_N9005OJVGBOE4_N9005XXUGBOD3_HOME.taror
Any hints or help guys??:crying:
Please any help guys
I'm still stuck with this problem, I tried all kinds of ideas after deep searches but non of them work so far
I even rooted my device and tried three custom ROMs but still my note 3 can't detect the SIM card and the IMEI is nul and baseband version is Unknown
any ideas
The issue is you must have chosen the wrong rom for your region. What Country are you in and is your sim from that country?
YOu need to flash a rom based on your CSC and sim ... I've done this a few times before and it always messed up when flashing custom roms, etc. The only way I found to fix it was to flash back to stock rom for my phones original region (ex: if my phone is from Japan, need to flash Japanese official rom for my mobile provider).
That should restore your IMEI and sim card issues.
If you're not sure, you can post back with details of your phone (CSC - region).
thanks for the reply . I can't really tel the exact location or region of my phone. but whe nI look at the box it all written in Bulgarian language.
I will try to flash N9005XXUGNG1_BGL and see what will happen
Hy all! This is my first thread.
And so sorry for my english.
So I bought a galaxy s7 edge (g935f) from the internet and it has a lot of weird issue...first this phone is a single sim t-mobile (hungary) version, but the software says this is a dual SIM version (935FD) I flashed a full-wipe 4 file from with Odin but after that the problem is still there. If I go to the ONE I menu the first imei is the phone's own imei, but the second imei is just a lot of zeros.
My second problem is that the wireless connections doesn't works.
The Bluetooth can't find any BT devices and the Wi-Fi is recognize only the 5ghz networks.(2.4ghz networks are invisible)
Is it possible to get this phone back to normal?
Is it should work if I try to reinstall the phone with smart switch? That app is download firmware that is match with the phone original carriers Rom.
Thanks in advance.
If the phone is the dual sim one (SM-G935FD) flashing the BTU ROM from SM-G935F (single SIM model) or the INU ROM from the SM-G935FD, it'll detect the second SIM slot that also works as microSD card.
By detecting it, it seems you have an G935FD...
try flashing one of those ROM's I have mentioned above with ODIN and do full wipe of the phone.
That will probably solve everything
Sent from SM-G935FD using Tapatalk
Where did you get your phone from? Better return it...
Uzsidoboz20 said:
Hy all! This is my first thread.
And so sorry for my english.
So I bought a galaxy s7 edge (g935f) from the internet and it has a lot of weird issue...first this phone is a single sim t-mobile (hungary) version, but the software says this is a dual SIM version (935FD) I flashed a full-wipe 4 file from with Odin but after that the problem is still there. If I go to the ONE I menu the first imei is the phone's own imei, but the second imei is just a lot of zeros.
My second problem is that the wireless connections doesn't works.
The Bluetooth can't find any BT devices and the Wi-Fi is recognize only the 5ghz networks.(2.4ghz networks are invisible)
Is it possible to get this phone back to normal?
Is it should work if I try to reinstall the phone with smart switch? That app is download firmware that is match with the phone original carriers Rom.
Thanks in advance.
Click to expand...
Click to collapse
Download samsung phone info app from play store. Find all your phone info chipset etc . .if you have exynos chip flash btu firmware or if Qualcomm then flash t-mobile one as you said it's saying t-mobile.....
But if you can, return it because as you said bt and wifi issues.
......it could be possible if you flash seller don't accept return.
Anik49 said:
Download samsung phone info app from play store. Find all your phone info chipset etc . .if you have exynos chip flash btu firmware or if Qualcomm then flash t-mobile one as you said it's saying t-mobile.....
But if you can, return it because as you said bt and wifi issues.
......it could be possible if you flash seller don't accept return.
Click to expand...
Click to collapse
Phone info app says it is an exynos modell.
My original firmware Was TMH at this moment i use the superman nougat rom and the problem is still there. What's so special with that BTU rom?
I found one BTU rom (4file) in tsar3000.com but that rom is 6.0. Can i flash it?
Uzsidoboz20 said:
Phone info app says it is an exynos modell.
My original firmware Was TMH at this moment i use the superman nougat rom and the problem is still there. What's so special with that BTU rom?
I found one BTU rom (4file) in tsar3000.com but that rom is 6.0. Can i flash it?
Click to expand...
Click to collapse
Btu is samsung stock 7 firmware basically for Uk region it's available here on xda. Try to flash the full firmware and see if it's work for you or not. Also you can flash stock 935fd firmware.
I bought an unlocked G950FD which turns out to be CSC THR (part of OXM) so should mean it's from Iran. I have found it generic enough in almost every way to be used internationally (in English) with two noticeable exceptions that i'm trying to solve.
1) there is pre-installed Persian Calendar in the OS which appears after the Gregorian date on the AOS and lock screen. I also noticed this extra date appearing on the Samsung Calendar app under the western date, but i don't use this app at all so can easily ignore. The AOS and lock screen is seen all the time and would displays: "MON, JUNE 5 (KHOR 15)". I looked through every settings on the phone and many forums online, and there is no software way to turn this off.
I thought a potential solution would be to replace this stock ROM with another region since any of the multi-CSC OXM firmwares should be compatible with the phone. So I tried to flash another region using Odin. I tried Singapore (SIN and STH) and completely reset/wiped the phone two separate times. However, despite flashing a large (almost 6GB) file onto the phone it still remains in THR when i looked in settings. I guess I misunderstood the purpose of different firmware regions, I thought i would be changing my phone's existing firmware to another region and get a different set of default apps and localization behavior. But the Persian date is still there on all the same screens.
Am I flashing the rom incorrectly? Is there some setting that i omitted that would give me the desired result of a Singapore OS? Any other ways to change CSC and get rid of unwanted parts of a regional firmware?
2) Another problem is when i receive calls on my local sim card, the phone number shows up without the country code, but if i store my numbers (on Google contacts) in "+<country code> <phone number>" format then the contact is not linked to the incoming call.
Apparently this is fairly common with international phones being used in another market. There is a workaround where i can edit my numbers on google to not have any numerical country codes but instead use the flag drop-down menu on google to indicate country associated with the number. I'm ok with that solution but is there another way? Would flashing a regional firmware that is my location solve this? The region that i intend to use the phone is not part of the OXM multi-CSC list of countries since they only sell the snapdragon variant here.
I would like to find solutions that would avoid root and custom roms, but if that is the only option here, i am not against going down that route.
Thanks a lot in advance.
My eventual solution and what i've learned.
So as i described above, i tried to flash many different versions of G950FD or G950F firware with multi-CSC OXM, but never saw my CSC change from THR. Nothing changed on my phone despite installing large files through odin which was always confusing to me. For the record, i tried BTU (UK), STH (Singapore), and SIN (Singapore) which are all part of the OXM.
I learned from another forum that the sim-card installed matters, so i was just trying different non-middle-east regions by picking UK or Singapore but my actual home region does not support this model/cpu variant. I don't have a sim-card from any OXM regions, only Hong Kong and US ones.
Then i found an old Australian (Optus) sim card from a trip and found a G950F firmware version with CSC OPS on Updato. Not part of CSC OXM but same PDA/Phone version and was told it's safe to flash. When i flashed that firmware with the AU sim card installed, i got the AU OS and all the old regional apps were gone. I got some Australian ones but nothing i can't uninstall. My caller ID problem also seem to be fixed. So i consider the problem fixed.
In all of this, the PDA version numbers were always the same (AQDG), so i'm still a bit unclear as to what the CSC file is specifying and doing.
Am i correct to assume that multi-CSC OXM firmware contained regional apps/settings for all the various regions but without a sim card installed to tell it which one to pick, it kept selecting the factory region of THR? And when i flashed the Optus firmware, did i really need the sim-card installed? Would it have changed the firmware to OPS because it's outside the multi-CSC OXM group?
You live in Hong Kong, right ?
I do too, and have a UAE S8, and Samsung Pay doesn't work.
Does your working around things allow you to use Pay, or you get stuck on the splash screen as well ?
tarkil said:
You live in Hong Kong, right ?
I do too, and have a UAE S8, and Samsung Pay doesn't work.
Does your working around things allow you to use Pay, or you get stuck on the splash screen as well ?
Click to expand...
Click to collapse
Yes i live in HK, so with the AU Optus Firmware I got a AU version of Samsung Pay with all AU ads and suggested businesses. I can get past the splash and login using my normal Samsung Account, which shouldn't have a region. BUT so far i haven't had any success adding any of my HK credit cards, i assume it's a version compatibility issue. There is no way to pick which regional version of Samsung Pay on the Play Store, so i guess it looks at your phone's origin to determine that part of the app.
I am not that keen to use Samsung Pay, but of course interested to know if it is possible. It says to call the banks to get my credit cards added, so maybe there is still a chance and i will post if i do succeed.
Do you think Samsung Pay is particularly good for HK? Would using Android Pay be comparable here? I'm not that experienced with mobile payment apps in the past. Seems like the membership card storage function will still work on my Samsung Pay so at least i have that and can slim down the wallet a bit.
Hey there buddy,
Finally found a thread that represents my problem also, in my case i have a s8 G950FD that shows the same thing on my lockscreen, by me it shows (KHOR18)!
Is there any way around it, i mean a fix?? I would greatly appreciate any help
Yes that's the Iranian calendar date so the day will increment everyday. Khor is abbrev for the current month.
Yes I have a solution (read my second post in thread) but involves flashing with a sim card and 950f or 950fd firmware of the same region as the sim card. You will need to reset and erase phone data.
If you need help flashing stock firmware there is a long thread on this forum and where I found the answer about how the sim card installed might make difference.
What region/sim are you currently trying to use your s8?
derf574 said:
Yes that's the Iranian calendar date so the day will increment everyday. Khor is abbrev for the current month.
Yes I have a solution (read my second post in thread) but involves flashing with a sim card and 950f or 950fd firmware of the same region as the sim card. You will need to reset and erase phone data.
If you need help flashing stock firmware there is a long thread on this forum and where I found the answer about how the sim card installed might make difference.
What region/sim are you currently trying to use your s8?
Click to expand...
Click to collapse
Hey there again,
Thank you very much for the time. I am in SE Europe, to be more precise Republic of Kosovo. My SIM is from Kosovo ( we are considered i believe to be in Europe carrier wise)
I do need help flashing the phone as i have no experience whatsoever i just recently switched from Iphone to Samsung, this being said i must also mention the fact that i would definitely need help. I dont want to mess up the phone i just got it like 2 days ago
Things to consider:
- You can flash both 950F and 950FD firmware on your 950FD.
- You need to find your desired firmware. And that region needs to match your sim card, use Updato or SamMobile but the firmware package is a >3GB file and takes a while to download. Make sure you only look for versions for model 950F or FD.
- You will need to download Odin and Samsung usb drivers to flash the firmware onto your phone. Follow the thread "OFFICIAL STOCK Firmware-update (Odin) thread Samsung GALAXY S8 SM-G950F" for the guide.
Colonel_Kosova said:
Hey there again,
Thank you very much for the time. I am in SE Europe, to be more precise Republic of Kosovo. My SIM is from Kosovo ( we are considered i believe to be in Europe carrier wise)
I do need help flashing the phone as i have no experience whatsoever i just recently switched from Iphone to Samsung, this being said i must also mention the fact that i would definitely need help. I dont want to mess up the phone i just got it like 2 days ago
Click to expand...
Click to collapse
If you decided to go the "SIM card CSC" method then follow this step by step:
https://www.sammobile.com/forum/showthread.php?t=37711
But I personally think you should do it through flashing a firmware with odin but properly and pay attention to step 6:
https://www.sammobile.com/forum/showthread.php?t=37508
Hope they help you resolve your issues.
Good luck.
samteeee said:
If you decided to go the "SIM card CSC" method then follow this step by step:
https://www.sammobile.com/forum/showthread.php?t=37711
But I personally think you should do it through flashing a firmware with odin but properly and pay attention to step 6:
https://www.sammobile.com/forum/showthread.php?t=37508
Hope they help you resolve your issues.
Good luck.
Click to expand...
Click to collapse
Again thank you very much for everything i do have one last question please. Regarding the step 6 should i do it or not i am not sure
Colonel_Kosova said:
Again thank you very much for everything i do have one last question please. Regarding the step 6 should i do it or not i am not sure
Click to expand...
Click to collapse
Yes, if you are changing country/code of CSC, then the system needs to recalculate the partitions.
And don't forget no short cuts! Every step should be done.
Good luck.
ooo man this things is killing me now the problem i have after i have rooted the phone is that the computer wont recognize my phone in download mode ??????????
Hey Peeps,
Small update on how things are for the time being. I have been following all steps as described with odin. Last night i had issues with my laptop not recognizing my phone in download mode, got rid of this issue by changing laptops. Once the procedure was finished i ended up with the same thing on my phone???
I have flashed a european software ( from france) but still no go on removing or changing the region!!!
To be honest dont really know what to do again help is appreciated since that date thing is really annoying
Any other way to get rid of khor on aod/aos
Went through the whole thread. Def not keen to flash or run csc. Any other way to turn off khor date from aod? Help !!!
Hey there all, again just a quick thank you for the tips and tricks. To be honest i dont really know what i did exactely but it worked for me.
What did the change by me was the first step, namely: https://www.sammobile.com/forum/showthread.php?t=37711
i really cant tell how but it worked ( used a sim card i have from Slovenia)
till the next one thank you again