Where to get hold of a replacement USB port? - Galaxy Grand Prime Q&A, Help & Troubleshooting

Hi Guys/Gals,
I've accidentally scratched my usb port and need to replace it. but can't find a replacement part in the UK.
Does anyone know where I can get hold of it? or would a usb port for another phone work for it?
thanks.

Related

Help!! Replace USB port on MDA...

I broke the mini usb connector on my MDA (the center plastic piece fell out, and I broke a metal pin trying to glue it back in). Is there a place I can get a new USB connector so I can take the phone somewhere for someone to solder it on for me? Or anyone on here willing to do the job relatively cheaply?
http://www.rs-components.com/index.html
they have tons of components
How do I know which one is the one in the MDA though?
anyone ???

[Q] Antenna (Coax) cable replacement

Hi All,
So I replaced the screen + digitizer in my Touch Pro and managed to break the connector on the Coaxial cable for the antenna.....
I have emailed everyone I can find in google with the HTC part number and description, but no one can get them! They all say I have to send the whole phone in....
Anyone know where I can get just the coax cable by itself?
Cheers in advance!
Here too
Yesterday wasn't a happy day...

[Q] Faulty USB Connector?

Hey guys,
I purchased my Xperia X8 back in October 2010 and have been using it to date. I think its a wonderful phone .. One problem, my USB connector seems to be faulty. It wont recognize my phone as connected unless I push the USB cable towards me, and have to keep holding it or have to put a book over the USB so it charges. I'm wondering does anyone else have that problem, and is there a quick fix to it? I'm going to mess with it for a while to see what exactly is the problem. Feel free to reply ..
MomoMaxedOut

[Q] USB and digitizer hardware issues.

My usb port has been flaky for a while but finally gave out totally recently. It's actually loose inside the case. Over the past couple weeks my digitizer has also been going bad. I read about how you can press the power button hard to get it working again, which works but it seems only a matter of time for that thing too. Anyone got any recommendations for what I could do? I ordered an external battery charger and battery but all it accomplished was frying my old battery. :/ I might try to solder a new usb port on once I have good reason to (read: solid mango wp7 rom.) but if my digitizer is done it's not really worth it. Why would pressing on the power button revive it when it's not working? I'm hoping it's just a loose cable.
Bottom line, does anyone who's had these problems (they're the two most common HD2 hardware issues afaik) have any recommendations for solutions?
Your USB port issue probably can't be fixed.. unless you can find someone who is willing to help you solder a new usb port to your motherboard (or you can do it yourself if you have enough skills)
As for your Digitizer, you can open up your hd2, and check if the digitizer plug is loose (located under the lcd). If it isn't, that means your hd2 digitizer is dead, and you should order a replacement.. (of course, please see here
I have the same issue with my Infuse. The digitiser only seems to have a problem for the four bottom buttons. They have a mind of their own. The rest of the screen is fine. My USB port is intermittant. I'll probably just take it back to the store though. Sorry I cannot help.

Broken nexus 6p display

Hey Guys!
So my nexus 6p dislay broke yesterday and the display is completely f****d... the digitizer reacts on a few places but i can't boot the phone because i have secure start-up encryption enabled and the screen doesn't react at the first number of the pin but on every else it does.
but i really really need some of the files that are on the phone so my question is: do you think i can somehow get them from my phone? I have TWRP installed if that somehow could help
Thanks!
stevebxp said:
Hey Guys!
So my nexus 6p dislay broke yesterday and the display is completely f****d... the digitizer reacts on a few places but i can't boot the phone because i have secure start-up encryption enabled and the screen doesn't react at the first number of the pin but on every else it does.
but i really really need some of the files that are on the phone so my question is: do you think i can somehow get them from my phone? I have TWRP installed if that somehow could help
Thanks!
Click to expand...
Click to collapse
Hook up OTG and connect USB mouse n keyboard. You can try this....https://forum.xda-developers.com/showthread.php?t=2786395. You might need screen replacement if you realllllly want your files.
00111101 said:
Hook up OTG and connect USB mouse n keyboard.
Click to expand...
Click to collapse
i only have a micro-usb OTG.... do you think it would be possible to solder some cheap usb c connector i have laying around here and then connect everything?
the problem is that the screen is also completley black
stevebxp said:
i only have a micro-usb OTG.... do you think it would be possible to solder some cheap usb c connector i have laying around here and then connect everything?
the problem is that the screen is also completley black
Click to expand...
Click to collapse
I don't know if this would help you but I bought my nexus second hand and only have micro usb chargers. My phone didn't come with one but my family got an s8 and it comes with a micro usb to type c... Maybe someone you kno has am s8 that could help you.
lil_ith said:
I don't know if this would help you but I bought my nexus second hand and only have micro usb chargers. My phone didn't come with one but my family got an s8 and it comes with a micro usb to type c... Maybe someone you kno has am s8 that could help you.
Click to expand...
Click to collapse
thank you i wanted to try that but somehow my usb c port died also yesterday..... so i can completely forget that phone unless i buy a new display for it but it's just not worth it for me anymore unfortunately :/

Categories

Resources