I broke the mini usb connector on my MDA (the center plastic piece fell out, and I broke a metal pin trying to glue it back in). Is there a place I can get a new USB connector so I can take the phone somewhere for someone to solder it on for me? Or anyone on here willing to do the job relatively cheaply?
http://www.rs-components.com/index.html
they have tons of components
How do I know which one is the one in the MDA though?
anyone ???
Related
Hi,
My boss has an i-mate PPC (Himalaya), but in putting it back in it's cradle he's managed to somehow bend some of the pins on the bottom connector.
I've managed to gently bend them back to the best I can see, but the PC can't see it any more; I think something in either the cradle or the connector has been broken.
Is there any way to pull it apart enough to get a good look at the connector? Is this something myself - as a reasonably technically-minded person with a decent set of tools - can do, or should I consider getting it repaired professionally?
Anyone got any idea what the warranty will cover?
-m
Hello,
I have the T-mobile MDA2 and something tragic happened this weekend. When I went to plug the device into the cradle, there was some resistance. When I looked at the connector on the bottom of the unit, two of the connector wires were bent. I tried to bend them back with a small screw driver, but the unit will no longer dock. Therefore, I cannot sync or charge. Does anyone know of a place that might be able to fix the unit. It is otherwise in perfect shape. Is there a way to replace the connector myself. Any help is greatly appreciated! Feel free to use my e-mail to respond at wal[email protected].
Thanks.
Brent
Look at
http://www.pdatechcenter.nl/reparatie_xda.html
A new connector only costs EUR 49,-
Kees
Hi all!
Does anybody know where can I buy the flat cable for the Universal (and cheap if possible )
I managed to make it working for now by taking off the isolation part of the flat behind the screen and this way I changed the loose length of the cable going trough the hole to the motherboard. So it doesnt rotate on the same place as before... It was tricky and needed some hot silicone to fix the broken part of the cable inside the cabel guide in order not to move the "broken" part.... But I will need to change the cable SOON.
Help!
I know it's been a while but:-
http://cgi.ebay.co.uk/ws/eBayISAPI....MEWA:IT&viewitem=&item=300124185023&rd=1&rd=1
So I bought a new housing for my O2 XDA II Mini, during the removal of the display ribbon I broke the little black part on the display connector which holds the ribbon down, and after hours of trying to get the ribbon back in and secured I have bent the pins in the connector to buggery.
The ribbon appears to be untouched, however the connector which the display ribbon goes into is broken.
Is there anywhere I can get hold of one of these little connectors to replace my broken one, obviously very sensitive soldering will be needed to remove the old one and solder the new one in place.
Alternatively, does anyone know any mobile phone repair shops in Auckland, New Zealand who would be able to help out with my situation?
I fear all i'm going to hear back is "the motherboard needs to be replaced", however I am determined not to go through this route, as I am a poor student and the phone sounds as if it functions fine, makes the beepy noise when first starting up on the setup screen.
I was very careful with the actual screen unit while removing it, and I have had signs of life earlier on in the broken connector episode, however I can no longer get anything showing as I can't fit the cable in.
Cheers for any help.
Anything would be appreciated.
"obviously very sensitive soldering will be needed"
And that only can be done by machines/robots. I don't think humans are even able to sloder those kind of connections...
But, could you post a picture? cause I might have suggestions on how to fix it. One would be to bend back the pins on the tiny slot with a toothpick and when done to tape the flatcable, so it stays there.
I've maybe got a spare creen for you.
g0atNZ said:
So I bought a new housing for my O2 XDA II Mini, during the removal of the display ribbon I broke the little black part on the display connector which holds the ribbon down, and after hours of trying to get the ribbon back in and secured I have bent the pins in the connector to buggery.
The ribbon appears to be untouched, however the connector which the display ribbon goes into is broken.
Is there anywhere I can get hold of one of these little connectors to replace my broken one, obviously very sensitive soldering will be needed to remove the old one and solder the new one in place.
Alternatively, does anyone know any mobile phone repair shops in Auckland, New Zealand who would be able to help out with my situation?
I fear all i'm going to hear back is "the motherboard needs to be replaced", however I am determined not to go through this route, as I am a poor student and the phone sounds as if it functions fine, makes the beepy noise when first starting up on the setup screen.
I was very careful with the actual screen unit while removing it, and I have had signs of life earlier on in the broken connector episode, however I can no longer get anything showing as I can't fit the cable in.
Cheers for any help.
Anything would be appreciated.
Click to expand...
Click to collapse
Hi, I've still got a SPV 500 and a MDA Compact, need to find it if you want you can have my MDA Compact screen.
Just PM if you are interested.
Just bought a new screen for a cracked hd2 and hit some problems. Firstly, its a uk hd2, so it was a solder connection, i bought the screen + digi from ebay and noticed it was a ribbon connection (not sure if that will make a difference). When undoing these plastic clips
http://imgur.com/Faiyig3
Both broke. They were so brittle, has anybody seen/heard of a way to fix this? I put it all back together and the screen does come on, but touch doesnt work.
Can anybody tell me what these cables do? Is one for touch, what about the other?
Gutted about my hd2, its been going so well all these years...is it fixable?
Not good :-/
those 2 clips: one is the flex ribbon connector & other is the LCD ribbon connector.
The ribbon from LCD also is feed for digitizer.
Not sure if the locking arms are replaceable by themselves ! will look at an old mainboard & see.
you may get some function by bending a very light V in the ribbon so point of v is ribbon contact face & thus pushes tighter in socket promoting better contact.
putting a bit of tape on back may help too! be careful though as actual socket is very fragile too ...
Mister B said:
Not good :-/
those 2 clips: one is the flex ribbon connector & other is the LCD ribbon connector.
The ribbon from LCD also is feed for digitizer.
Not sure if the locking arms are replaceable by themselves ! will look at an old mainboard & see.
you may get some function by bending a very light V in the ribbon so point of v is ribbon contact face & thus pushes tighter in socket promoting better contact.
putting a bit of tape on back may help too! be careful though as actual socket is very fragile too ...
Click to expand...
Click to collapse
Tell me about it, thanks for explaining what the ribbon connectors do...I couldn't understand why the screen would turn on if the connector was broke. That's a good idea about slightly bending the cable, I will try that tomorrow afternoon. If i could swap them out, that would be awesome.
Thanks for answering, I appreciate you talking time to help a fellow hd2 fan!
Have made none working digitizer work via creating very light v shape bend in middle of contact area (bending across width of cable)
Do be gentle though ... not sure how successful it will be without clamp though :-/
fracmo2000 said:
Just bought a new screen for a cracked hd2 and hit some problems. Firstly, its a uk hd2, so it was a solder connection, i bought the screen + digi from ebay and noticed it was a ribbon connection (not sure if that will make a difference). When undoing these plastic clips
http://imgur.com/Faiyig3
Both broke. They were so brittle, has anybody seen/heard of a way to fix this? I put it all back together and the screen does come on, but touch doesnt work.
Can anybody tell me what these cables do? Is one for touch, what about the other?
Gutted about my hd2, its been going so well all these years...is it fixable?
Click to expand...
Click to collapse
how did they break? i'm going to attempt this myself soon and would appreciate any advice on getting the clips open safely.