Hi,
I just flashed 5.0 (N9005XXUGBOD3 - Not Rooted) via Odin from rooted 4.4.1.
Odin Mode now shows:
Product Name: SM-N9005
Current Binary: Samsung Official
System Status: Official
Reactivation Lock: Off
Knox Warranty Void: 0x1 (0) - I know this cannot be changed, I used to run CM
Qualcomm Secure Boot: Enable (CSB)
RP SWREV: S2, T2, R2, A3, P3
Secure Download: Enable
UDC Start
But Settings > General > About Device > Status shows Custom and I cannot get OTA.
Any ideas?
Thanks!
RyanH898 said:
Hi,
I just flashed 5.0 (N9005XXUGBOD3 - Not Rooted) via Odin from rooted 4.4.1.
Odin Mode now shows:
Product Name: SM-N9005
Current Binary: Samsung Official
System Status: Official
Reactivation Lock: Off
Knox Warranty Void: 0x1 (0) - I know this cannot be changed, I used to run CM
Qualcomm Secure Boot: Enable (CSB)
RP SWREV: S2, T2, R2, A3, P3
Secure Download: Enable
UDC Start
But Settings > General > About Device > Status shows Custom and I cannot get OTA.
Any ideas?
Thanks!
Click to expand...
Click to collapse
You have the match the CSC (country code) with the firmware you flashed for get OTA updates.
Joku1981 said:
You have the match the CSC (country code) with the firmware you flashed for get OTA updates.
Click to expand...
Click to collapse
It is matched as far as I can tell. I cannot link you to a picture properly yet due to not having 10 posts.
i.imgur.co m/JDnwhrK.jpg
RyanH898 said:
It is matched as far as I can tell. I cannot link you to a picture properly yet due to not having 10 posts.
i.imgur.co m/JDnwhrK.jpg
Click to expand...
Click to collapse
No, it's not. BTU is United Kingdom code country. And the latest firmware 5.0 is this ONE. Do you have installed it?
Hi,
I already had this installed but re-flashed using your link just in case - I still have the same issue
Any ideas?
Thanks!
RyanH898 said:
Hi,
I already had this installed but re-flashed using your link just in case - I still have the same issue
Any ideas?
Thanks!
Click to expand...
Click to collapse
Simplest fix was the best... System restore!
Related
so i was trying to update my n9005 to the newest software, and the file i picked had the wrong region code on it apparently. now all i can do is get into download mode. tried 3 different files already and cant get any of them to work, keep getting the ext4 error in odin.
my previous baseband was N9005XXUBMHK
download mode i get this now:
ODIN MODE
PRODUCT NAMEL SM-9005
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
REACTIVATION LOCK: OFF
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x0
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, R1, A1, P0
WRITE PROTECTION: Enable
Help? What file can i update this with? Or if I install a custom recovery can i put any region software or custom rom on here?
Bump
no one
do you guys know if i put a custom recovery on it, if ill be able to install any of the custom roms?
Adamkopo said:
no one
do you guys know if i put a custom recovery on it, if ill be able to install any of the custom roms?
Click to expand...
Click to collapse
Hi, i'm in the same situation, can someone help us for find a solution??
Thanks in advance
Hi,
I have Note 3 16gb and I bought here in Saudi last 2 weeks ago but after i flash my Note 3 using official 4.4.2 using Philippine Firmware i got FAILED in ODIN and there's EXT4 error then every time i turn on my Note 3 it showing UDC Start,please see below little detail.
I read all the forum about this issue but still not working, I believe my Note 3 maybe came from Hongkong because of the box showing.
I wanted to know if i use Official Firmware using Hongkong which is "TGY" is there any solution or i need to do something to make my Note 3 back to life?
Thank you very and I hope you can give me exact procedure or which file I can use.
ODIN MODE
PRODUCT NAME: SM-N9005
CURRENT BINARY: Custon
SYSTEM STATUS: OFFICIAL
REACTIVACION LOCK (KK): OFF
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
QUALCOMM SECURE BOOT: ENABLE (CSB)
AP SWREV: S2, T2, A2, A3, P2
WRITE PROTECCION: Enable
UDC START
16gb unit are limited to the HK (TYG) rom because of the memory allocation, so go ahead and download the latest NE6 for HK and flash your device with odin.
golalmo said:
16gb unit are limited to the HK (TYG) rom because of the memory allocation, so go ahead and download the latest NE6 for HK and flash your device with odin.
Click to expand...
Click to collapse
Thnx for the reply..I downloaded "N9005ZHUENE3_N9005ZZHENE3_TGY" from sammobile, is this possible to resolve my problem regarding in Note 3?
Please give me some procedure or which file I download.
Thank you very much
Hello i gave my Note 3 N9005 rooted with custom rom to a guy for fixing no network issue in GSM. He flashed some SPT firmware file as he told me and now phone is not going to recovery.It shows something like dis.
PRODUCT NAME: SM-N9005
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
REACTIVATION LOCK(KK): OFF
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
QUALCOM SECUREBOOT: ENABLE (CSB)
RP SWREV: S2, T2, A2, A3, P3
WRITE PROTECTION: ENABLE
UDC STARThows odin mode like this
Phone goes into download mode.I have tried to flash stock rom using odin but it fails in between.Can somebody please guide me to solve this..I want my phone back to normal as I have bought it 2 months back.
Change odin version and take last region version. Remove battery and flash in dl mode
rayman95 said:
Change odin version and take last region version. Remove battery and flash in dl mode
Click to expand...
Click to collapse
thanks for response.Can u explain what u mean by last region version or give me link to download right firmware.
choose the firmware version from your country or at least europe or asia..
rayman95 said:
choose the firmware version from your country or at least europe or asia..
Click to expand...
Click to collapse
Actually that is the main problem.I am located in India and bought this phone from eBay.in.The seller imported it from Europe i think.He told me that it was locked to Spain Vodafone. Now i don't know which firmware to flash.
xx for europe dx for asia...
so tahe last XXNF4 or XXNG2 rom
but maybe you need the vodafone code.....
rayman95 said:
xx for europe dx for asia...
so tahe last XXNF4 or XXNG2 rom
but maybe you need the vodafone code.....
Click to expand...
Click to collapse
Phone was already unlocked but it won't work in GSM mode.Thanks for help i'll try with above firmware and then i'll report you back.
Hi, everyone. hope someone can help me.
I've installed CM 13 through TWRP in my N910C. After, I tried to flash stock FW from sammobile through ODIN but it always fail.
That's what appear on my screen in odin mode(dont know if matters):
reactivation lock: OFF
secure download: Enable
knox warranty void: 1
AP swrev: 2
Please, someone HELP !!! tnks
arthurbonicio said:
Hi, everyone. hope someone can help me.
I've installed CM 13 through TWRP in my N910C. After, I tried to flash stock FW from sammobile through ODIN but it always fail.
That's what appear on my screen in odin mode(dont know if matters):
reactivation lock: OFF
secure download: Enable
knox warranty void: 1
AP swrev: 2
Please, someone HELP !!! tnks
Click to expand...
Click to collapse
http://forum.xda-developers.com/note-4/help/fix-note4-exynos-n910c-bootloop-problem-t3312161
http://forum.xda-developers.com/showthread.php?t=3282641 Follow the instructions here.
I have been trying to flash my galaxy s5 sm-g900f with the stock ROM from sammobile but i have failed for the last twenty attempts . the information displayed in ODIN MODE is
PRODUCT NAME: SM-G900P
CURRENT BINARY: CUSTOM
SYSTEM STATUS :CUSTO
REACTIVATION LOCK KK ): OFF
KNOX WARRANTY VOID: 0X1 4 )
QUALCOMM SECUREBOOT: ENABLE CSB)
AP SWREV: S1, T3 , R1, A3, P1
SECURE DOWNLOAD :ENABLE
UDC START
SECURE CHECK FAIL : aboot
please help , how do i flash it the correct latest ROM
bantu97 said:
I have been trying to flash my galaxy s5 sm-g900f with the stock ROM from sammobile
Click to expand...
Click to collapse
You have no SM-G900F, you have an SM-G900P.
So just download and flash an appropriate firmware.