Hello i gave my Note 3 N9005 rooted with custom rom to a guy for fixing no network issue in GSM. He flashed some SPT firmware file as he told me and now phone is not going to recovery.It shows something like dis.
PRODUCT NAME: SM-N9005
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
REACTIVATION LOCK(KK): OFF
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
QUALCOM SECUREBOOT: ENABLE (CSB)
RP SWREV: S2, T2, A2, A3, P3
WRITE PROTECTION: ENABLE
UDC STARThows odin mode like this
Phone goes into download mode.I have tried to flash stock rom using odin but it fails in between.Can somebody please guide me to solve this..I want my phone back to normal as I have bought it 2 months back.
Change odin version and take last region version. Remove battery and flash in dl mode
rayman95 said:
Change odin version and take last region version. Remove battery and flash in dl mode
Click to expand...
Click to collapse
thanks for response.Can u explain what u mean by last region version or give me link to download right firmware.
choose the firmware version from your country or at least europe or asia..
rayman95 said:
choose the firmware version from your country or at least europe or asia..
Click to expand...
Click to collapse
Actually that is the main problem.I am located in India and bought this phone from eBay.in.The seller imported it from Europe i think.He told me that it was locked to Spain Vodafone. Now i don't know which firmware to flash.
xx for europe dx for asia...
so tahe last XXNF4 or XXNG2 rom
but maybe you need the vodafone code.....
rayman95 said:
xx for europe dx for asia...
so tahe last XXNF4 or XXNG2 rom
but maybe you need the vodafone code.....
Click to expand...
Click to collapse
Phone was already unlocked but it won't work in GSM mode.Thanks for help i'll try with above firmware and then i'll report you back.
Related
so i was trying to update my n9005 to the newest software, and the file i picked had the wrong region code on it apparently. now all i can do is get into download mode. tried 3 different files already and cant get any of them to work, keep getting the ext4 error in odin.
my previous baseband was N9005XXUBMHK
download mode i get this now:
ODIN MODE
PRODUCT NAMEL SM-9005
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
REACTIVATION LOCK: OFF
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x0
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, R1, A1, P0
WRITE PROTECTION: Enable
Help? What file can i update this with? Or if I install a custom recovery can i put any region software or custom rom on here?
Bump
no one
do you guys know if i put a custom recovery on it, if ill be able to install any of the custom roms?
Adamkopo said:
no one
do you guys know if i put a custom recovery on it, if ill be able to install any of the custom roms?
Click to expand...
Click to collapse
Hi, i'm in the same situation, can someone help us for find a solution??
Thanks in advance
Hi ..
This thread is for Malaysia user who owned unroot note 3 to keep updating latest OTA firmware update.
I use DiGi and at this moment still haven't received any update since bought it . (MJ1)
Well of course since mj1 is still the latest full rom for malaysia. Mj3 and others are for uk at the moment.
Sent from my SM-N9005 using Tapatalk
http://forum.xda-developers.com/showthread.php?t=2496902
Maybe u should try search button first...
Sent from my SM-N9005 using xda app-developers app
HELP rooting note 3 4.4.2
hello everybody!!, i have issue rooting my note 3 everytime i try to root i get FAIL in odin using CF-Auto-Root-hlte-hltexx-smn9005.
I Previously had root on 4.3 but i am currently at stock 4.4.2
here is the info i have on my phone
Booloader
N9005XXUENB4
BASEBAND VERSION
N9005XXUENB1
PDA VERSION
N9005XXUENB4
CSC VERSION:
N9005OLBENA3
Odin mode info:
Reacivation lock(kk): on
Knox kernel lock: 0x0
Knox warranty void : 0x1
Qualcom secureboot: enable (CSB)
Write protection: enable
sorry i am such a noob please help i dont understand how to get root again....thanks
rav2113 said:
hello everybody!!, i have issue rooting my note 3 everytime i try to root i get FAIL in odin using CF-Auto-Root-hlte-hltexx-smn9005.
I Previously had root on 4.3 but i am currently at stock 4.4.2
here is the info i have on my phone
Booloader
N9005XXUENB4
BASEBAND VERSION
N9005XXUENB1
PDA VERSION
N9005XXUENB4
CSC VERSION:
N9005OLBENA3
Odin mode info:
Reacivation lock(kk): on
Knox kernel lock: 0x0
Knox warranty void : 0x1
Qualcom secureboot: enable (CSB)
Write protection: enable
sorry i am such a noob please help i dont understand how to get root again....thanks
Click to expand...
Click to collapse
Set reactivation lock off. It's in setting>general>security
Hi,
I have Note 3 16gb and I bought here in Saudi last 2 weeks ago but after i flash my Note 3 using official 4.4.2 using Philippine Firmware i got FAILED in ODIN and there's EXT4 error then every time i turn on my Note 3 it showing UDC Start,please see below little detail.
I read all the forum about this issue but still not working, I believe my Note 3 maybe came from Hongkong because of the box showing.
I wanted to know if i use Official Firmware using Hongkong which is "TGY" is there any solution or i need to do something to make my Note 3 back to life?
Thank you very and I hope you can give me exact procedure or which file I can use.
ODIN MODE
PRODUCT NAME: SM-N9005
CURRENT BINARY: Custon
SYSTEM STATUS: OFFICIAL
REACTIVACION LOCK (KK): OFF
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
QUALCOMM SECURE BOOT: ENABLE (CSB)
AP SWREV: S2, T2, A2, A3, P2
WRITE PROTECCION: Enable
UDC START
16gb unit are limited to the HK (TYG) rom because of the memory allocation, so go ahead and download the latest NE6 for HK and flash your device with odin.
golalmo said:
16gb unit are limited to the HK (TYG) rom because of the memory allocation, so go ahead and download the latest NE6 for HK and flash your device with odin.
Click to expand...
Click to collapse
Thnx for the reply..I downloaded "N9005ZHUENE3_N9005ZZHENE3_TGY" from sammobile, is this possible to resolve my problem regarding in Note 3?
Please give me some procedure or which file I download.
Thank you very much
Hi,
I just flashed 5.0 (N9005XXUGBOD3 - Not Rooted) via Odin from rooted 4.4.1.
Odin Mode now shows:
Product Name: SM-N9005
Current Binary: Samsung Official
System Status: Official
Reactivation Lock: Off
Knox Warranty Void: 0x1 (0) - I know this cannot be changed, I used to run CM
Qualcomm Secure Boot: Enable (CSB)
RP SWREV: S2, T2, R2, A3, P3
Secure Download: Enable
UDC Start
But Settings > General > About Device > Status shows Custom and I cannot get OTA.
Any ideas?
Thanks!
RyanH898 said:
Hi,
I just flashed 5.0 (N9005XXUGBOD3 - Not Rooted) via Odin from rooted 4.4.1.
Odin Mode now shows:
Product Name: SM-N9005
Current Binary: Samsung Official
System Status: Official
Reactivation Lock: Off
Knox Warranty Void: 0x1 (0) - I know this cannot be changed, I used to run CM
Qualcomm Secure Boot: Enable (CSB)
RP SWREV: S2, T2, R2, A3, P3
Secure Download: Enable
UDC Start
But Settings > General > About Device > Status shows Custom and I cannot get OTA.
Any ideas?
Thanks!
Click to expand...
Click to collapse
You have the match the CSC (country code) with the firmware you flashed for get OTA updates.
Joku1981 said:
You have the match the CSC (country code) with the firmware you flashed for get OTA updates.
Click to expand...
Click to collapse
It is matched as far as I can tell. I cannot link you to a picture properly yet due to not having 10 posts.
i.imgur.co m/JDnwhrK.jpg
RyanH898 said:
It is matched as far as I can tell. I cannot link you to a picture properly yet due to not having 10 posts.
i.imgur.co m/JDnwhrK.jpg
Click to expand...
Click to collapse
No, it's not. BTU is United Kingdom code country. And the latest firmware 5.0 is this ONE. Do you have installed it?
Hi,
I already had this installed but re-flashed using your link just in case - I still have the same issue
Any ideas?
Thanks!
RyanH898 said:
Hi,
I already had this installed but re-flashed using your link just in case - I still have the same issue
Any ideas?
Thanks!
Click to expand...
Click to collapse
Simplest fix was the best... System restore!
Hello,
Here's my device information:
Storage: 32 GB
Bootloader Version:
N900AUCUCNC2
PDA Version:
N9005ZHUENF1
CSC Version:
N9005OJVENE1
Baseband Version:
N900AUCUCNC2
Latest Firmware:
N/A
Android Version:
4.4.2 / SDK 19
I tried flashing a Colombian Lollipop stock ROM ( PDA N9005VJSGBRH1 ) but Odin (v 3.13.1) fails at aboot.mbn.
The device is not bricked or anything, but I am unable to flash the Android 5.0 ROM.
Could you please let me know which stock ROM should I download and flash, or any other steps I should follow to get stock Lollipop on this device?
Thanks!
What is your device ??
Boot to download mode.
You have n9005 firmware. and N900 boatloader That's 100%wrong.
JJEgan said:
What is your device ??
Boot to download mode.
You have n9005 firmware. and N900 boatloader That's 100%wrong.
Click to expand...
Click to collapse
Thank you for your reply, I am still learning all of this since I am a newbie.
I have a SM-N9005. And yes, the bootloader and firmware are weird because I think it I got it soft bricked before so I fixed it in any way I could at that time.
What would you recommend me to download and flash now? I would like to flash stock 5.0 for Latin America if possible.
Thanks! :good:
JJEgan said:
What is your device ??
Boot to download mode.
You have n9005 firmware. and N900 boatloader That's 100%wrong.
Click to expand...
Click to collapse
To be clear:
In phone info it says N9005 and when I bought the phone it was supposed to be that model.
But when I boot in download mode it says,
PRODUCT NAME: SM N900A
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
Knox Kernel Lock: 0x0
Knox Warranty Void: 0x0
Qualcomm SecureBoot: Enable (CSB)
RP SREV: S2, T2, R2, A3, P2
Write Protection: Enable
UDC START
Any help is appreciated.
PRODUCT NAME: SM N900A
Thats what it is , what does it say under the battery ??
AT&T model N900A with locked bootloader .
AT&T forum here .
https://forum.xda-developers.com/note-3-att
JJEgan said:
PRODUCT NAME: SM N900A
Thats what it is , what does it say under the battery ??
AT&T model N900A with locked bootloader .
AT&T forum here .
https://forum.xda-developers.com/note-3-att
Click to expand...
Click to collapse
Thanks, man. I was really off track.