Hi, everyone. hope someone can help me.
I've installed CM 13 through TWRP in my N910C. After, I tried to flash stock FW from sammobile through ODIN but it always fail.
That's what appear on my screen in odin mode(dont know if matters):
reactivation lock: OFF
secure download: Enable
knox warranty void: 1
AP swrev: 2
Please, someone HELP !!! tnks
arthurbonicio said:
Hi, everyone. hope someone can help me.
I've installed CM 13 through TWRP in my N910C. After, I tried to flash stock FW from sammobile through ODIN but it always fail.
That's what appear on my screen in odin mode(dont know if matters):
reactivation lock: OFF
secure download: Enable
knox warranty void: 1
AP swrev: 2
Please, someone HELP !!! tnks
Click to expand...
Click to collapse
http://forum.xda-developers.com/note-4/help/fix-note4-exynos-n910c-bootloop-problem-t3312161
http://forum.xda-developers.com/showthread.php?t=3282641 Follow the instructions here.
Related
so i was trying to update my n9005 to the newest software, and the file i picked had the wrong region code on it apparently. now all i can do is get into download mode. tried 3 different files already and cant get any of them to work, keep getting the ext4 error in odin.
my previous baseband was N9005XXUBMHK
download mode i get this now:
ODIN MODE
PRODUCT NAMEL SM-9005
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
REACTIVATION LOCK: OFF
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x0
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, R1, A1, P0
WRITE PROTECTION: Enable
Help? What file can i update this with? Or if I install a custom recovery can i put any region software or custom rom on here?
Bump
no one
do you guys know if i put a custom recovery on it, if ill be able to install any of the custom roms?
Adamkopo said:
no one
do you guys know if i put a custom recovery on it, if ill be able to install any of the custom roms?
Click to expand...
Click to collapse
Hi, i'm in the same situation, can someone help us for find a solution??
Thanks in advance
Hi,
I have Note 3 16gb and I bought here in Saudi last 2 weeks ago but after i flash my Note 3 using official 4.4.2 using Philippine Firmware i got FAILED in ODIN and there's EXT4 error then every time i turn on my Note 3 it showing UDC Start,please see below little detail.
I read all the forum about this issue but still not working, I believe my Note 3 maybe came from Hongkong because of the box showing.
I wanted to know if i use Official Firmware using Hongkong which is "TGY" is there any solution or i need to do something to make my Note 3 back to life?
Thank you very and I hope you can give me exact procedure or which file I can use.
ODIN MODE
PRODUCT NAME: SM-N9005
CURRENT BINARY: Custon
SYSTEM STATUS: OFFICIAL
REACTIVACION LOCK (KK): OFF
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
QUALCOMM SECURE BOOT: ENABLE (CSB)
AP SWREV: S2, T2, A2, A3, P2
WRITE PROTECCION: Enable
UDC START
16gb unit are limited to the HK (TYG) rom because of the memory allocation, so go ahead and download the latest NE6 for HK and flash your device with odin.
golalmo said:
16gb unit are limited to the HK (TYG) rom because of the memory allocation, so go ahead and download the latest NE6 for HK and flash your device with odin.
Click to expand...
Click to collapse
Thnx for the reply..I downloaded "N9005ZHUENE3_N9005ZZHENE3_TGY" from sammobile, is this possible to resolve my problem regarding in Note 3?
Please give me some procedure or which file I download.
Thank you very much
I rooted my S5 SM-G900F over a year ago to get rid of the vodafone bloatware, I used odin and if my memory serves me right i used phils touchwizz to flash it with i think.
Anyway that was over a year ago and it was a massive effort back then as i'm not very good with this sort of thing. I've now got a s6 so I thought I'd give my wife the s5 but before I did I tried to factory reset it.
Big mistake as now it only boots up into a screen that says "could not do normal boot" ODIN MODE
Product name = SM-G900F
Current Binary = custom
System status = custom
Reactivation lock (KK) = off
Knox warrenty void = 0x1 (4)
Qualcomm secureboot = enable (csb)
RP SWREV = S1, T1, R1, A1, P1
UDC START
Downloading do not turn off target !!
Could I have some advice on this please.
Flash a stock ROM from my sig or sammobile dot com with ODIN
Instructions under the download on sammobiles site
*Detection* said:
Flash a stock ROM from my sig or sammobile dot com with ODIN
Instructions under the download on sammobiles site
Click to expand...
Click to collapse
Thank you very much it worked a treat.
Nice one
Hi,
I just flashed 5.0 (N9005XXUGBOD3 - Not Rooted) via Odin from rooted 4.4.1.
Odin Mode now shows:
Product Name: SM-N9005
Current Binary: Samsung Official
System Status: Official
Reactivation Lock: Off
Knox Warranty Void: 0x1 (0) - I know this cannot be changed, I used to run CM
Qualcomm Secure Boot: Enable (CSB)
RP SWREV: S2, T2, R2, A3, P3
Secure Download: Enable
UDC Start
But Settings > General > About Device > Status shows Custom and I cannot get OTA.
Any ideas?
Thanks!
RyanH898 said:
Hi,
I just flashed 5.0 (N9005XXUGBOD3 - Not Rooted) via Odin from rooted 4.4.1.
Odin Mode now shows:
Product Name: SM-N9005
Current Binary: Samsung Official
System Status: Official
Reactivation Lock: Off
Knox Warranty Void: 0x1 (0) - I know this cannot be changed, I used to run CM
Qualcomm Secure Boot: Enable (CSB)
RP SWREV: S2, T2, R2, A3, P3
Secure Download: Enable
UDC Start
But Settings > General > About Device > Status shows Custom and I cannot get OTA.
Any ideas?
Thanks!
Click to expand...
Click to collapse
You have the match the CSC (country code) with the firmware you flashed for get OTA updates.
Joku1981 said:
You have the match the CSC (country code) with the firmware you flashed for get OTA updates.
Click to expand...
Click to collapse
It is matched as far as I can tell. I cannot link you to a picture properly yet due to not having 10 posts.
i.imgur.co m/JDnwhrK.jpg
RyanH898 said:
It is matched as far as I can tell. I cannot link you to a picture properly yet due to not having 10 posts.
i.imgur.co m/JDnwhrK.jpg
Click to expand...
Click to collapse
No, it's not. BTU is United Kingdom code country. And the latest firmware 5.0 is this ONE. Do you have installed it?
Hi,
I already had this installed but re-flashed using your link just in case - I still have the same issue
Any ideas?
Thanks!
RyanH898 said:
Hi,
I already had this installed but re-flashed using your link just in case - I still have the same issue
Any ideas?
Thanks!
Click to expand...
Click to collapse
Simplest fix was the best... System restore!
I have been trying to flash my galaxy s5 sm-g900f with the stock ROM from sammobile but i have failed for the last twenty attempts . the information displayed in ODIN MODE is
PRODUCT NAME: SM-G900P
CURRENT BINARY: CUSTOM
SYSTEM STATUS :CUSTO
REACTIVATION LOCK KK ): OFF
KNOX WARRANTY VOID: 0X1 4 )
QUALCOMM SECUREBOOT: ENABLE CSB)
AP SWREV: S1, T3 , R1, A3, P1
SECURE DOWNLOAD :ENABLE
UDC START
SECURE CHECK FAIL : aboot
please help , how do i flash it the correct latest ROM
bantu97 said:
I have been trying to flash my galaxy s5 sm-g900f with the stock ROM from sammobile
Click to expand...
Click to collapse
You have no SM-G900F, you have an SM-G900P.
So just download and flash an appropriate firmware.