Hello all,
I bought the a display assembly for my LG G2 on Fixez (because I am new to XDA I can't post a link). My LG G2 had a small crack on the screen, the touch functionality malfunctioned so I had to fix my screen.
Unfortunately, I did not check the compatibility of the parts I ordered with the specific model of the LG G2 that I used. My LG G2 is the D802 model. I ordered a display assembly which did not work for this model. I noticed this while I already installed the new screen and was connecting the connectors.
The only thing that I could not connect is the top connector of the display assembly. The top connector of the new display assembly was too large.
It seems that this top connector is too large. It does not fit on the top left part. I googled on which part of the phone I need to connect it too. It's called: the Dock Connector & Headphone Jack Assembly.
So I thought the following: If I change the Dock Connector & Headphone Jack Assembly to a D801 model. Will the display assembly AND the dock connector&headphone jack assembly (which are D801 models) work on the rest of my LG G2 D802 model?
Related
I've listed my Hermes - HTC branded version - on eBay. Originally put it up on Marketplace. Also listed a few parts that seem to be harder to find including a rear camera, dpad board from a 8525 and a keyboard sub board and antenna/speaker. Don't know if I should link to ebay but here goes:
Camera
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=150395603571&ssPageName=STRK:MESELX:IT
Phone:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=150395614424&ssPageName=STRK:MESELX:IT
Scroll Wheel/Flash
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=150395616347&ssPageName=STRK:MESELX:IT
Speaker/Antenna Module
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=150395617919&ssPageName=STRK:MESELX:IT
dPad/Front Keyboard PCB
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=150395620644&ssPageName=STRK:MESELX:IT
All the parts were from a donor phone and work perfectly. The phone is in great physical condition and everything works perfectly as described - the front dPad gets a little flaky - generally works - sometimes won't but can start up again by moving scroll wheel. Can't use the existing part I'm selling because it doesn't match up. Apparently there are TWO version os the dpad one has the controller chip at the edge of the PCB (ATT/Cingular - DOPOD 838) and original HERMES has it more toward the center. The keypads are different. I also have the sliding keyboard PCB without the keys and a flex cable (BLACK) and keyboard FLEX. OH - have another rubber plug for the antenna as well.
If interested just PM me and I can either sell it through Ebay or take it down and do it privately.
Trying to find an LCD/Digitizer with Frame for my phone. I can't seem to clear up whether it matters what model I look at for parts.
Looking at a bundle of parts that include LCD Screen, Digitizer Touch Screen, Front Housing, Front Facing Camera, Earphone Jack with Ear Speaker Flex Cable Ribbon, Charging Port Flex Cable Ribbon, Signal Wire Vibrating Motor and Power Button Flex Cable Ribbon.
All of these are for the N9005.
Does anyone know if these will work with the Canadian model? Alternatively I could just get the LCD/Digitizer with housing for the same model, or any US model.
nuttin?
Hi. Today I replaced my LCD + digitiser in my LG G2. After re-assembly, I noticed that I'm generally receiving low signal (1-2 bars lower than usual) and my rear facing camera isn't working (app states "cannot connect to the camera"). Front facing camera works fine. I quadriple checked all the connections, they seem to be plugged in correctly.
I have two questions:
1. Does anyone have a solid photo that shows which antenna cables have to be plugged in where? I searched online and some people say that it's one way, other people say its the other. I tried both, and the combination where the white cable goes to the left slot on the bottom (by the main speaker) and right at the top (vice versa for the black cable) seems to give the the highest signal.
2. Can I somehow check whether it's the camera that's broken or the motherboard without actually buying a new camera?
Thank you for your help.
So while replacing my rear facing camera I accidentally partially tore the ribbon cable for the recent apps button (thought it was just adhesive. Was terribly wrong). Now the button is kind of borked. It partially works but very inconsistently and seems to activate itself if I apply too much pressure to the frame of the phone.
Upon research I'm told that I need to match a part specific to the phone's carrier which is Sasktel (Canadian variant). However, I can't seem to find any replacement parts specifically for this variant of the S5.
I've activated the onscreen nav bar for now. Any ideas on how I should proceed?
I have a G530, the Tmobile version, though fully unlocked, rooted, etc. I had cracked the digitizer and while waiting for a new one I dropped it again and the LCD popped out with the digitizer, disconnecting itself and would come back on after that. I got a new LCD and attached it to the board (disassembled) and all worked. I mounted the board back in the case and reattached everything but then only the backlight would turn on during initial boot. The connection seemed loose and after 2-3 reconnects I got my display to work, but while attaching the digitzer, the glass at the very top, just before the lcd starts broke... So I got ANOTHER lcd and digitizer (They're cheap) This LCD only gives the backlight at initial power on, with no display response, but no matter what I do, I can't get it to kick on like the last one.
I'm trying to get an idea if it is the new LCD, or if my connector on the board is broken, It looks like maybe a bit of plastic at the top broke off.. and is making the connector a bit loose. Since I get a backlight, anyone have any experience as to which is more likely broken? I'm not sure if power from the connector goes straight to the backlight, or if it goes to the LCD first, and if I would get a backlight with a bad LCD. These are cheap $25 LCD & Digitizer bundles from Amazon, like 'Mencia' brand so good chance I could have gotten a new one that is dead.
I'll try to get another up close shot of the connector, this magnifying app didn't focus in as well and you cant see the individual connectors as well, but they are fine, its the very top part of the connector looks a bit smaller. The bottom part has a piece of metal sandwiched between the plastic, but the top doesn't have a bit of plastic after the metal tab, of course, it could be absolutely nothing :s