hey guys.i need your help.my sgy stuck in bootlogo after i reboot my recovery and then i tried to reboot system and its also stuck in bootlogo.what is the best thing to do or the best way without flashing thru odin.heres what happen...
i flash my sgy to stock rom with this version [S5360_DXMJ1_OLBMJ1_DXMI1] and then i flash the hyperion 9 GM final build and it works fine.after that, i tried to flash the Merruk tech kernel 2.0 thru kernel update by Fakbly followed by ext4 flasher and system 1.0.8.it works fine.i test it thru root checker and i found out that theres no busybox installed.so i plan to flash back my old kernel,the one that was backup by kernel update by Fakbly.and when i reboot my recovery...that where the problem started.sorry for the bad english.hope you all understand what im trying to say.thanks alot and hope you can help me.
Related
Plzz help me i have root my arc 2.3.4 42 and installed cwm installer and installed recovery after I download a rom Ics and update it, so it retryed know it frezzing on sony ericsson i waited 1 hour nothing happend, I update back to normal use -updater servies after I trying again update new rom Ics is frezzing again what to do
Unlock bootloader Yes
Supercharger v6 not installed
did you flashed a compatible Boot.img? It seems that you've missed that part.
Flash either Stock Advanced ICS Kernel or Doomlord's ICS Kernel V4 and from there install the update.zip
Did u clear all cache and so on?
Today I got my Nexus 4 and started to play with it .I am a complete novice to rooting and android .
I wanted to dual boot Android and Ubuntu Touch , came across this nice app called MultiRom which needed rooting .I dug around a bit .
Finally rooted the phone using CMW ( recovery-clockwork-touch-6.0.4.3-mako ) / SuperUs ( 1.80 ) . I followed the how to from a bunch of videos in youtube .
I was able to install Multiboot . on opening the app , some warnings were thrown that MultiRom, backup and kernel patch were not installed . I have checked the three checkboxes and proceded with install . It went for a reboot .After reboot ( it started to boot from the "internal", which is the default stock android i believe ) nothing happens . The initial "Google" logo comes , then the screen starts flickering and stays like that ( so far one hour ) .I tried to boot to recovery and did a factory reset .That did not help either.
Please let me know if there is something I could try, may be collect some logs . The device is not definitely bricked because I can see the boot menu .I suspect the kernel patch did something fishy . Any way where I can look to find the issue ?
Thanks .
What rom are you on? It sounds like the multirom patched kernel is not compatible. Flash a compatible kernel and you'll be able to boot again.
Factory images are available at https://developers.google.com/android/nexus/images#occam
All you'd need to do is flash the boot.img.
Thank You !!
ziddey said:
What rom are you on? It sounds like the multirom patched kernel is not compatible. Flash a compatible kernel and you'll be able to boot again.
Click to expand...
Click to collapse
Thanks ! flashed the official images, up and running agan .
Lesson learnt : If something is not enabled by default , there is a good reason for it . Do your homework before patching the kernel.
Hello Xda. my phone is a D802 With CloudyG3 2.0 and cloudy kernel. i debloated the kernel and coul start up normally then ibooted ut in twrp recovery to flash a zip file for quickwindow fix and a 24 dpi nav bar,
but when i flashed the last to zip files i ran into a boot loop where my phone is restarting all the time. how can i get out of this boot loop ?
Reflash the ROM and check if those mods are compatible with Cloudy G3 2.0 or not...
I know there is a specific QW version for that ROM... And not sure if the navbar has been updated or not
Thx for the anwser. i had some troubles about getting into recovery but i managed to reflash and boot up again
Please help needed!!
I'm stuck here for 3 days
Ok I'm going to tell everything I did,,
My Gionee E7 is indian version.
First I rooted my phone with kingo Root.
Than I flashed CWM chinese version.
I upgraded my system to kitkat and changed the recovery to stock.
I used it for a week than some how my music player and gallery were corrupted.
I don't have any rom so I download one but it was in chinese, flashed it to my gionee. than after rooting,,
I flashed the CWM, same I flashed weeks ago
Here my problem started :crying:
The CWM is not starting. I used recoery tool to boot into recovery after boot up it shows black screen. I used every method holding Vol+ and power button but the same result.
than I tired to get back to my stock recovery but it does the same.
flashed many times both recoveries but didn't worked.
I searched a lot and find a TWRP. I flashed it and wow it worked Finally I can boot into recoery mode.
Now I find the Nandroid backup of indian version. I made it a zip and flashed it through twrp.
My phone is back to indian version but its slow, not too much but its slow; camera, gallery and other apps take some time to open. I can't make or rcv phone calls. Now what i did is download the update form System update.
Now i got kitkat rom.zip but twrp failed to install it.
Some one on the internet was saying that its the problem with my Kernel. I have the latest kernel so CWM won't work cuz it uses old kernel and display drivers.
My
android version is 4.2.2
Kernel version is 3.4.0-svn2155
I also got TWRP for lolipop,
and I patched binary_update in my kitkat rom too but TWRP can't flash it
Thats my whooooolllleeeee story. "
I got stuck with this for almost 3 days now I'm damn tired can't do it anymore plz help :crying::crying::crying:
I figured it out by myself
Ok guyz didn't get any help so I figured it out by my self.
I'm posting it here so if anyone gets stuck like me could solve his issue
I used GNQC Download tool and flashed the whole firmware of my cell including, kernel, rom, recovery, boot everything.
Now I'm back to stock indian rom (jellybean) with stock recovery and now I'm going to upgrade to kitkat
I'm new user so I can't posts links just replace the (dot) in the link,
First download stock firmware of Gionee e7 in following link, GNQC download tool and drivers also included in this zip:
www(dot)androidxda.com/download-gionee-stock-rom-models
Just unzip it and follow the instructions on this site:
www(dot)androidxda.com/gnqc-downlod-tool
I didn't slept last night bcuz of this mess now going to sleep whole day :silly:
Goodnite and bless you all :angel:
AkashX4686 said:
Ok guyz didn't get any help so I figured it out by my self.
I'm posting it here so if anyone gets stuck like me could solve his issue
I used GNQC Download tool and flashed the whole firmware of my cell including, kernel, rom, recovery, boot everything.
Now I'm back to stock indian rom (jellybean) with stock recovery and now I'm going to upgrade to kitkat
I'm new user so I can't posts links just replace the (dot) in the link,
First download stock firmware of Gionee e7 in following link, GNQC download tool and drivers also included in this zip:
www(dot)androidxda.com/download-gionee-stock-rom-models
Just unzip it and follow the instructions on this site:
www(dot)androidxda.com/gnqc-downlod-tool
I didn't slept last night bcuz of this mess now going to sleep whole day :silly:
Goodnite and bless you all :angel:
Click to expand...
Click to collapse
Hello my friend, please help me.
I am trying to flash stock inidan rom 4.2 but.. I installed all CWM for E7 found on the internet and I am getting black screen. I managed to Install TWRP but TWRP cannot flash the rom that I need to flash. I flashed a chinese 4.2 but is piece of garbage..
gngc-download-tool said that the com port is closed.
I have windows 64 is this the problem causing gngc not working?
No its not, it is working on 64bit windows very well.
In TWRP factory reset and format system and data, than install
Chinese 4.2 ROM. After that boot it and try it again.
It should work!
bllkarv said:
Hello my friend, please help me.
I am trying to flash stock inidan rom 4.2 but.. I installed all CWM for E7 found on the internet and I am getting black screen. I managed to Install TWRP but TWRP cannot flash the rom that I need to flash. I flashed a chinese 4.2 but is piece of garbage..
gngc-download-tool said that the com port is closed.
I have windows 64 is this the problem causing gngc not working?
Click to expand...
Click to collapse
For me...problem!
there´s a cwm recovery that flashes over the kernel...
i flashed it and than i was unable to go to recovery, every time i tried the phone power off
Solution: Flash the stock boot.img
Use the file according to the Android version...
Help
I just rooted my gionee elife e7. Flashed the chinese recovery which seemed to be the only one which would be compatible. But, while changing a few setting using pimp my rom, the software just stopped working. Errors keep showing up on the screen - "system.ui is not working", "android app is not working", I cannot even go the settings because "settings is not working". Third party apps still seem to work, so, whatsap and stuff continue to function. Doing a factory reset or flashing firmware again seem to be the only viable option.
But, when I try to load up the bootloader using the power and volume keys, it gets stuck on the screen showing the gionee logo and it reads 'fastboot mode' in the bottom left hand side corner. So,
a. can you offer any advice which may be useful ?
b. can you share the link from where you got a TWRP recovery which will work on the Elife ?
c. do you have any idea what exactly went wrong here ?
Any help you can provide will be appreciated because, it's my mausi's phone and I will have a very tough time explaining what really went down here.
Regards,
hi everybody
i'm new at lenovo development thread ,and as i'am bored of laggy a6000 firmware especially after updates i decided to do root and flash custom roms so i did root successfully and installed TWRP recovery and then downloaded Carbon rom and placed it on memory and flashed "CM11 MoStock v1.48 .img"Kernel ,after flashing kernel system couldn't start and stucked on Lenovo logo and i think it's normal as the kernel not compatible with the stock rom so on TWRP i did wipe for data ,cach and dalvik cach and flashed the rom but i'm not sure if it was flashed properly or not it always says at the start of installation "not found MD5 " and after 2 minutes it say successful
after rebooting system it goes on bootloop and now i don't no what i have to do to please help me
http://forum.xda-developers.com/lenovo-a6000/help/unbrick-lenovo-a6000-plus-lenovo-a6000-t3137247
You can read my guide on how to fix nearly all software sided problems HERE.
I'd appreciate a Thanks! thrown my way!
try this tutorial
my phone lenovo a6000 once was bricked, and solved with follow those tutorial.
thnx every body i tried to flash another rom "MIUI 8" via recovery and finally it worked well
miz0ooo0 said:
thnx every body i tried to flash another rom "MIUI 8" via recovery and finally it worked well
Click to expand...
Click to collapse
Try using CM 12.1 by ED300.
if we are in any custom rom then how to flash different kernel.
if we directly flash through recovery then phone stuck on lenovo logo.