Hi
please advice shortly if i'm correct
device LT15i. unlocked BL, updated from 2.3.4 (0.62) to 4.0.4 (.587), then kernel downgraded to 4.0.3, then rooted and updated to the last .587
what i want now:
i prefer to get CM10 or MIUI v4 or any other custom rom, but i can not ___as i can not get CMW installed___
(x parts does not install even it says OK, custom rom app does not override x-parts mess it did and refuses install cwm 3.x.x.x on to unsuscessful 5.x.x.x., I can not find stand alone recovery.img for ARC etc... )
please advice if i should look for CWM installled somehow!!! (HOW?)
or should I
1: install Doom kernel, which suppose to be with CWM and then proceed to any other rom through CWM right after that kernel?
or
2: wipe totally to official SEUS ROM no root... and start over again as i did already?
sorry if i got lost somewhere here (and could not find my answer in other topics)
i'd appreciate your replies.
thx
Download cm, extract only boot.img from it other leave untouch.
Fastboot kernel on phone, it will have cwm, (put rom on sd card before fastbooting) and then in cwm flash rom and gapps (finf by your self and put on sd card before fastboot)
Sent from my LT26i
Hello, i messed up my phone:
I updated successfully to AURORA_4.1_4.0.4:
http://forum.xda-developers.com/showthread.php?t=1532662
But then i wanted to go back to official ISC and I updated to this:
http://forum.xda-developers.com/showthread.php?t=1951481
After that my baseband turned to unknown and I tried to install this 'Changelog Final Full B928 ICS Baseband':
http://forum.xda-developers.com/showthread.php?t=1793014
I replaced my previous ics recovery (6,0,1.0) with 5,0,2,7 recovery and install 'Changelog Final Full B928 ICS Baseband' from SD card. After that I can only go to recovery and my phone always restarts at white Huawei screen if I try to start it normaly.
Can anyone tell me how to go back to official GB or ICS?
How to delete or move my post? I see now that it's in wrong section of the forum :/
Thanks to Bronxitas, i was able to install stock ICS and here is the guide:
androidmanija.lt/forum/viewtopic.php?p=56996#p56996
I have installed official jb + unlocked bootloader and cwm and after i have installed miui rom by flatzki (or smth) it gives me this http://i.imgur.com/beyrYZY.jpg . So the phone boots,it shows the bootanimation and after that appears this and the phone shuts down. Please tell me how to fix this asap because i dont have a notebook or a pc.
Have you tried to reflash the JB? Or you had this problem after you unlocked the bootloader? Maybe you did something wrong.
This appear after i flashed the miui rom. Before when i was on official jb i had no problems.
Reply
I think if you flashed miui on jelly bean you must flash v10 baseband from xoxodemo http://forum.xda-developers.com/showthread.php?t=2275969 , because miui is for android 4.0.3.
Thats right mate. Right now i have downloaded another jb rom but my cwm doesnt recognize it. When i tap on external sd card it appears the miui zip but the jb zip not. How can i fix this?
Hi,
My phone detail --
MB526, have android 4.1.2 and have rom -CM-X MIG 2.02
I have two issues :-
1. my wifi disconnects after some time and i have to disable it for long time and then enable it to work ,so any way to solve it -on my other phone
there is no issue about wifi atall.
2.I been trying to install kitkat 4.4 on my defy plus but always fails to do in recovery with message like this:--
error in /sdcard/.....zip, installation aborted"
tried both recoveries but now on touch TWRP -- any idea ?
Thanks
vaibhavm said:
Hi,
My phone detail --
MB526, have android 4.1.2 and have rom -CM-X MIG 2.02
I have two issues :-
1. my wifi disconnects after some time and i have to disable it for long time and then enable it to work ,so any way to solve it -on my other phone
there is no issue about wifi atall.
2.I been trying to install kitkat 4.4 on my defy plus but always fails to do in recovery with message like this:--
error in /sdcard/.....zip, installation aborted"
tried both recoveries but now on touch TWRP -- any idea ?
Thanks
Click to expand...
Click to collapse
I tooo faced the same problem at the beginning with cm11 (cm-11-20140117-NIGHTLY-mb526) by quarx, though I was able to install cm11(cm-11-20131229-NIGHTLY-mb526) by quarx successfully.... Im a noob to this flashing stuff still managed and understood a bit of this procedure... I believe I read this some where on this forum that if you want to install ***cm11 (cm-11-20140117-NIGHTLY-mb526)*** then you need to go back to the custom rom first then from there you can install , though I'm not 100% Sure and afraid to do any experimentation with my Defy+.... As of now Im on
"Android 4.3.1"
Kernel 2.6.32.9-Aerokernel
10.2-20131030-NIGHTLY-mb526
I am facing almost the same problems as yours "Installation failed" as if there is a problem with the zip file which I'm sure of that isnt the case :/
Please somebody help the noobs...!!!
Thank you.
imdroid87 said:
I tooo faced the same problem at the beginning with cm11 (cm-11-20140117-NIGHTLY-mb526) by quarx, though I was able to install cm11(cm-11-20131229-NIGHTLY-mb526) by quarx successfully....
Thank you.
Click to expand...
Click to collapse
Did you update recovery?
Link for that is in OP of http://forum.xda-developers.com/showthread.php?t=2515036
becer said:
Did you update recovery?
Link for that is in OP of http://forum.xda-developers.com/showthread.php?t=2515036
Click to expand...
Click to collapse
Yes I did the recovery Update and then rebooted and then tried installing cm11 (cm-11-20140117-NIGHTLY-mb526) but unfortunately it failed "Aborted"
imdroid87 said:
Yes I did the recovery Update and then rebooted and then tried installing cm11 (cm-11-20140117-NIGHTLY-mb526) but unfortunately it failed "Aborted"
Click to expand...
Click to collapse
Try maybe installing from scratch (starting with original sbf).
I reinstalled Kitkat on my Defy+ tonight - sbf, rooted sbf, 2ndInit, cm-10-20131030, recovery update and then 140120.
becer said:
Try maybe installing from scratch (starting with original sbf).
I reinstalled Kitkat on my Defy+ tonight - sbf, rooted sbf, 2ndInit, cm-10-20131030, recovery update and then 140120.
Click to expand...
Click to collapse
Buddy "becer" can u please guide me step wise to go back to the Stock Rom then 2init what ever it is I dont understand a thing
I know what stock Rom is but don't know how to degrade to the stock rom from 4.3.1 and how to install this 2init thing
would be a great help if you could guide me through the procedure step wise
Thank You.
1. root with Framaroot http://forum.xda-developers.com/showthread.php?p=37508806
2. Install 2nd init http://forum.xda-developers.com/showthread.php?p=12837303
3. Update recovery with this http://forum.xda-developers.com/showthread.php?p=48501247
4. Install CM11
Sent from my MB526 using Tapatalk
cyrusct82 said:
1. root with Framaroot http://forum.xda-developers.com/showthread.php?p=37508806
2. Install 2nd init http://forum.xda-developers.com/showthread.php?p=12837303
3. Update recovery with this http://forum.xda-developers.com/showthread.php?p=48501247
4. Install CM11
Sent from my MB526 using Tapatalk
Click to expand...
Click to collapse
Buddy Im already running cyanogenmod on my defy+ and in the second link what you gave for installing the 2ndinit Recovery it says:
DO NOT INSTALL THIS IF ARE YOU ALREADY RUNNING CYANOGENMOD. That ROM already has bootmenu pre-installed, and you'll probably end up having to flash an SBF file to recover your phone.
NOTE: You need ROOT installed on your Defy to use this application.
What should I do ???
I will try from start by using original sbf file using RSD and then CM11 and updating recovery after that Kitkat ,btw can you mention which ROM you tried because i tried these 2 earlier --> omni-4.4.2-20140117-mb526-HOMEMADE .zip and AOSPA 4.0+ PARANOIDANDROID [beta]
Kitkat 4.4.2 KOT49H android-4.4.2_r1.
Also can some1 help me with my wifi frequently disconnection problem too please .
vaibhavm said:
I will try from start by using original sbf file using RSD and then CM11 and updating recovery after that Kitkat ,btw can you mention which ROM you tried because i tried these 2 earlier --> omni-4.4.2-20140117-mb526-HOMEMADE .zip and AOSPA 4.0+ PARANOIDANDROID [beta]
Kitkat 4.4.2 KOT49H android-4.4.2_r1.
Also can some1 help me with my wifi frequently disconnection problem too please .
Click to expand...
Click to collapse
I tried this
Mokee
"MK43.1-jordanplus-201312040138-NIGHTLY"
with Gapps
gapps-jb+-20130730_defy-minimal
and
update-recovery
CM11 by Quarx
"cm-11-20131229-NIGHTLY-mb526"
with Gapps
1-16_GApps_Standard_4.4.2_signed
They both worked for me but unable to install the latest one.... I'm trying the method just mentioned by the senior member but unable to root again using framaroot as its showing me this error
"Half-Success :-/ ... system partition is read-only, use local.prop trick. Reboot your device and use adb to see if it run as root"
I don't know what to do now :silly:
imdroid87 said:
I tried this
Mokee
"MK43.1-jordanplus-201312040138-NIGHTLY"
with Gapps
gapps-jb+-20130730_defy-minimal
and
update-recovery
CM11 by Quarx
"cm-11-20131229-NIGHTLY-mb526"
with Gapps
1-16_GApps_Standard_4.4.2_signed
They both worked for me but unable to install the latest one.... I'm trying the method just mentioned by the senior member but unable to root again using framaroot as its showing me this error
"Half-Success :-/ ... system partition is read-only, use local.prop trick. Reboot your device and use adb to see if it run as root"
I don't know what to do now :silly:
Click to expand...
Click to collapse
Mine sbf is rooted alredy so maybe try it first then go to CM10 .
its DEFYPLUS_U3_4.5.1-134_DFP-231_CEE_ROOTED_No_Signed.rar
downloaded it earlier from here only.
I have tried Mokee, but direct return to Quarx compilation made big stability problems too. Solution was to flash with original rom, then rooted one, 2ndInint and Quarx cm10, then cm11.
As I had Android 2.3.6 (3.4.5.1 - 231), I used these roms - http://forum.xda-developers.com/showthread.php?t=1542956.
It is very important to wipe data and cache just after first, original flash - otherwise you will have infinite boot loop and cannot run phone.
Look at http://forum.xda-developers.com/showthread.php?t=966537 too.
becer said:
I have tried Mokee, but direct return to Quarx compilation made big stability problems too. Solution was to flash with original rom, then rooted one, 2ndInint and Quarx cm10, then cm11.
As I had Android 2.3.6 (3.4.5.1 - 231), I used these roms - http://forum.xda-developers.com/showthread.php?t=1542956.
It is very important to wipe data and cache just after first, original flash - otherwise you will have infinite boot loop and cannot run phone.
Look at http://forum.xda-developers.com/showthread.php?t=966537 too.
Click to expand...
Click to collapse
Im phone is f***** , what I did is install this framaroot and installed rootchecker..... I tried to do the rooting using "installsu" and then clicked Gilmo and it gave me this message:
“Half-Success :-/ … system partition is read-only, use local.prop trick. Reboot your device and use adb to see if it runs as root”
then I restarted my phone and check with root checker and found its saying its saying Root access successful and then I wondered which I suppose I shudnt have wondered :crying: to user framaroot and do the "unroot" and again restarted , and now after restart I tried to do the regular thing wipe cache ,Dalvik , Data and the phone is not even mounting them its sayin
E: Can't mount /cache/recovery/command etc
Im able to open the android 4.1.2 (Jb - quarx)
but not able to install a thing in my internal memory coz I messed up bad with the partition table bad:crying:
I tried to fix it through this
http://forum.xda-developers.com/showthread.php?t=1759558&highlight=status+0
but no luck :/
I been able to flash and run cm-10.2-20140120-NIGHTLY-mb526.zip thts-- android 4.3 ,so do factory reset and go here http://quarx2k.ru/roms/defy-cm10.2/ --get latest build .
my problem is only wifi disconnects frequently -seems on this working fine ,will check it for few days ,anyway 4.4 will still have bugs so better be on some lower version.
For the opening post: the first issue is a known bug in 4.4, I did not know it is wrong even in 4.1...
vaibhavm said:
I been able to flash and run cm-10.2-20140120-NIGHTLY-mb526.zip thts-- android 4.3 ,so do factory reset and go here http://quarx2k.ru/roms/defy-cm10.2/ --get latest build .
my problem is only wifi disconnects frequently -seems on this working fine ,will check it for few days ,anyway 4.4 will still have bugs so better be on some lower version.
Click to expand...
Click to collapse
Oooh in that case even if I can install the latest Cm11 by Quarx then I should not be doing it as the problem your saying about the wifi getting disconnecting frequently is not acceptable :silly:
anyways just fighting with my Defy+ as of now , Installing the Stock sbf on it as I bricked the phone
So the new Question arises what CM version is more stable or can I ask whose performance is Better in terms of speed.... As I don't mind with Features but I dont want Lags.... Previously I installed 4.2.1 I Suppose and installed the mininal gapps and was have around 240mb free of RAM...
is that good ???
Thank you for the responses buddies :fingers-crossed:
imdroid87 said:
Oooh in that case even if I can install the latest Cm11 by Quarx then I should not be doing it as the problem your saying about the wifi getting disconnecting frequently is not acceptable :silly:
anyways just fighting with my Defy+ as of now , Installing the Stock sbf on it as I bricked the phone
So the new Question arises what CM version is more stable or can I ask whose performance is Better in terms of speed.... As I don't mind with Features but I dont want Lags.... Previously I installed 4.2.1 I Suppose and installed the mininal gapps and was have around 240mb free of RAM...
is that good ???
Thank you for the responses buddies :fingers-crossed:
Click to expand...
Click to collapse
vaibhavm I have installed this 4.4.2 Android Panroid
http://forum.xda-developers.com/showthread.php?t=2576930
[AOSPA 4.4.2 KOT49H] [Beta] Defy(+) PARANOIDANDROID 4.0+ [18/01/2014]
Working awesome fast and seems stable until now and I have gone through some reviews about it on defy+ on that forum even they are giving it positive reviews..
Check it out for sure:good::fingers-crossed:
hey guys.i need your help.my sgy stuck in bootlogo after i reboot my recovery and then i tried to reboot system and its also stuck in bootlogo.what is the best thing to do or the best way without flashing thru odin.heres what happen...
i flash my sgy to stock rom with this version [S5360_DXMJ1_OLBMJ1_DXMI1] and then i flash the hyperion 9 GM final build and it works fine.after that, i tried to flash the Merruk tech kernel 2.0 thru kernel update by Fakbly followed by ext4 flasher and system 1.0.8.it works fine.i test it thru root checker and i found out that theres no busybox installed.so i plan to flash back my old kernel,the one that was backup by kernel update by Fakbly.and when i reboot my recovery...that where the problem started.sorry for the bad english.hope you all understand what im trying to say.thanks alot and hope you can help me.