guys can you help me plz in my g2 (f320k ) im stuck in 2% too no recovery and lg security error only in download mode and im using cloudy 3.3 before how to fix it plzzzz
:crying::crying::crying::crying::crying:theres an error
MODEL DLL Event : (100, 51)
08:12:04 : Step : TYPE_WPARAM_UPGRADE_ERROR
plz how to fix it anyone:crying::crying:
Related
I am stuck with my l7 at emergency mode after i tried to flash v10k from CM10.When i want to flash v10k,kdz give me wParam:100 and Lparam 4010 error...what can i do ?
when i tried to updated my phone ( LG E612 ) to 4.2 by KDZ (my own was 4.0.3) at the middle of work an error :
UPGRADE Error
Wparam = 500
Lparam = 100
so the upgrade crashed and my phone is ON and didnt turn OFF even i hold the power botton
in the screen just is a note : " Download is in progress Do Not disconnect Cable." whit LG logo
what should i do?
Are you sure that 4.2 kdz is for e612/e610 ?
Did you had a custom ROM before?
Anyway, download v10d_firmware (for e610, no matter, its the same for e612/e612g/f). Flash it and then try flash that KDZ again (after you confirm its for YOUR phone)
Hello !!!
Click to expand...
Click to collapse
I have international LG G2 D802 16 GB....
I have problem with flashing stock firmware,i use method "back to stock" from this link : http://forum.xda-developers.com/showthread.php?t=2432476
My LG SUPPORT TOOL freaze in 47% and give my a error...On the mobile 49%
10:57:38 : MODEL DLL Event : (100, 3146241)
10:57:38 : Step : TYPE_WPARAM_UPGRADE_ERROR
10:57:38 : CleanModelDll() : Free Model.dll
10:57:38 : _DetachDLL Call
10:57:43 : _DetachDLL Call End
10:57:43 : Page_Error şÎşĐŔÔ´Ď´Ů
10:57:43 : ż©±â´Â Retry şÎşĐŔÔ´Ď´Ů
My LG com ist changed to 41
LG modem disabled
Trying with 5-6 diferent .KDZ file-s
NOTHING WORK !!!
No acces to recovery ( Default stock recovery image)
I can not turn on the phone
Does not appear fastboot
I now how to fix error or my phone in fastboot mode by code, but I can not enter the fastboot mode...
I'm traying to flash .tot file system on my lg but i give a error...
"wrong system or dll"
Please guys help my...
Sry for my bad language...
Check out this thread: http://forum.xda-developers.com/showthread.php?t=2582142
Recently saved another member :fingers-crossed:
I'm stuck with "Security Error" on boot up
I have a Tmobile d801... was trying to flash a d802 4.2.2 rom with TWRP 2.6.3.2.
Install flashed fine... after install I have the Tmobile stock kernel save as a restore... so I restored the stock kernel and rebooted system.
Got bootloop... booted back into recovery. TWRP 2632 can take a very long time to wipe and restore so I flashed philz_touch_6.27.5-d801.
I guess that fail because when I boot into recovery I get a prompt in the top left...
Code:
[9110] Fastboot mode started
[9160] udc_start()
I can get into download mode but R&D tools fails at 45% with "T-Mobile USA D80110C_00.kdz"
Code:
18:52:51 : MODEL DLL Event : (13, 41)
18:52:58 : wParam : 13, lParam = 42
18:53:04 : wParam : 13, lParam = 43
18:53:10 : wParam : 13, lParam = 44
18:53:17 : wParam : 13, lParam = 45
18:53:19 : wParam : 6002, lParam = 0
18:53:19 : #################################################
18:53:19 : Indirect Internal / PC to Phone send end
18:53:39 : wParam : 13, lParam = 46
I try the TOT method with LGFlashTool but when I use the d801.dll it fails because it thinks the phone is a d802 because of the d802 rom I flashed.
I try TOT with d802.dll just to see if I could get something on the phone... but it fails on the modem check. kinda stuck in the middle of no mans land.
Is there a way to flash recovery and or a way to force LGFlashTool to continue with the d801 dll?
Thanks in advance.
any d802 rom can´t work on a d801 phone
Why do you do that?
[FIX] LG G2 "Booting Error" under LG Logo. Stuck in Boot Loop.
I received "Booting Error" below the LG logo and was then stuck in a boot loop. It happened to me after updating to Lollipop 5.0.2 and installing AutoRec.apk. This is the TWRP recovery program that you can install like any other app after rooting your LG G2. The cause for the problem is that I accidentally installed the AutoRec.apk for firmware's 4.x.x and not for Lollipop 5.0.x.
TO PREVENT THIS FROM HAPPENING DOWNLOAD & INSTALL '(D801) LG G2 AutoRec-Lollipop' FROM GOOGLE PLAY STORE :good:
Fix Booting Error:
Download Load LG Flash Tool 2014 and run & install
Follow this tutorial Follow this tutorial: .KDZ Flash Method using LG Flash Tool 2014 and you will be back up in running.
-Staylecrate
Hello Everyone,
I have a Telus/Koodo D803 currently running CM12.1 and I'd like to revert to stock to test some signal issues. The problem is, the LG Flash tool fails at 1% or 2%. I'm using a Telus KDZ so it should match.
There are the last 6 lines of the log file.
00:32:18 : Step : TYPE_WPARAM_UPGRADE_ERROR
00:32:18 : CleanModelDll() : Free Model.dll
00:32:18 : _DetachDLL Call
00:32:23 : _DetachDLL Call End
00:32:25 : Page_Error ºÎºÐÀÔ´Ï´Ù
00:32:25 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
Any suggestions for getting this to flash? Alternatively, are there any threads for restoring the D803 specifically from a brick? That may also be helpful...
Thanks!