Every Firmware flashed with Odin = Black Screen - Galaxy S 5 Q&A, Help & Troubleshooting

Hello,
I'm trying to downgrade my G900F using this method to obtain Root without tripping KNOX, however after flashing my screen stays blank. After 5 mins managed to turn the Download mode, and to Initialize recovery software in KIES, initializing Recovery mode is not possible (see below) ...
Tired about 6 different Firmwares, all stock , the last one even with the same CSC that I've had installed by KIES:
Product code AUT
PDA G900FXXU1POF4
CSC G900FAUT1POF1
nothing works for me - every single time black screen. After flashing Stock BL from Kies download through Odin I'm able to get to Download mode, but Recovery wont boot up so I do not have possibility to .factory reset (wipe data).
Is there any possibility to wipe data through abd or some external software, maybe that will help?
OK I've got it.... Looks like new protection .... Is there any way to install any other firmware (including custom)? Looks like I have to give up on KNOX but with the new protection I'm not possible to flash any other firmware anyway....

Use Kingroot/SuperSuMe and then use FlashFire.
You have a lot of reading to do mate.

Related

[Q] Killed my Tab 4 (SM-T230NU)

I was looking to factory reset my Tab 4 7.0 to sell, but since I've rooted it and installed TWRP, the process wasn't as simple as I'd have liked. I tried the standard Factory Reset function of TWRP, but it didn't do anything. I tried Wipe Data, still nothing. Then I did an Advanced Wipe and checked off everything, not realizing one of the options was to wipe /system. Now my Tab 4 keeps rebooting to TWRP, and the recovery also states "No OS is installed".
I'm currently downloading the new NH1 firmware from SamMobile and considering flashing it through Odin 3.09. Would this be the most effective method, considering I had no prior backup made to the tablet? Will this likely remove my root access and custom recovery? Is there a chance of tripping something like a Knox counter and bricking my device (happened once when I tried an old method to root my Note 3, Knox blocked part of the flash and left the system halfway between two OS images)
Sounds like you're on the right track with downloading the firmware off of SamMobile. I had a similar issue with my Galaxy Tab 2 and that got my tablet out of its funk.
Sent from my SM-T330NU using Tapatalk
At this point I've tried all the ROMs listed on SamMobile for my tablet and all fail to completely flash. Odin says it was fully successful, but when the tablet tries to boot, I only hear half the boot sound and then the boot animation just sits there saying Samsung with the little blue dots popping out of it, and that's it.
Are there any other types of ROMs I can flash to this system? Does it matter what version of Odin I'm using? (Tried 3.06 and 3.09, both unsuccessful)
chuman72486 said:
At this point I've tried all the ROMs listed on SamMobile for my tablet and all fail to completely flash. Odin says it was fully successful, but when the tablet tries to boot, I only hear half the boot sound and then the boot animation just sits there saying Samsung with the little blue dots popping out of it, and that's it.
Are there any other types of ROMs I can flash to this system? Does it matter what version of Odin I'm using? (Tried 3.06 and 3.09, both unsuccessful)
Click to expand...
Click to collapse
hi i have a tab 3 7.0. why dont you try using odin 3.07 if that fails try emergency firmware recovery in kies. odin flashing of official firmware does not increase binary counter as stated by sammy tech support. but you flashing twrp does increase binary count. hope i helped.
Sent from my SAMSUNG-SGH-I337 using XDA Free mobile app
chuman72486 said:
At this point I've tried all the ROMs listed on SamMobile for my tablet and all fail to comCellular allsh. Odin says it was fully successful, but when the taalso tries to boot, I only hear half the boot sound and then the boot animation just sits there saying Samsung with the little blue dots popping out of it, and that's it.
Are there any other types of ROMs I can flash to this system? Does it matter what version of Odin I'm using? (Tried 3.06 and 3.09, both unsuccessful)
Click to expand...
Click to collapse
I have successfully flashed ND9 and N2E firmwares with Odin 3.07. The NH1 firmware is corrupt when I download it. These are the Cellular South versions which I assume are the US firmwares. I did also flash the Canada versions and I couldn't tell them apart. Currently on ND9 firmware so I could get it rooted. I only have the WiFi 230NU.
chuman72486 said:
At this point I've tried all the ROMs listed on SamMobile for my tablet and all fail to completely flash. Odin says it was fully successful, but when the tablet tries to boot, I only hear half the boot sound and then the boot animation just sits there saying Samsung with the little blue dots popping out of it, and that's it.
Are there any other types of ROMs I can flash to this system? Does it matter what version of Odin I'm using? (Tried 3.06 and 3.09, both unsuccessful)
Click to expand...
Click to collapse
this question may sound silly but have you tried to wipe data/cache after full odin firmware install?
I believe i was able to keep all my apps and data after full firmware upgrade using odin, so it isnt doing full wipe after all.
.
I rooted and installed TWRP on this device and decided I wanted to get the SM-T330NU instead. I returned the T230 and the clerk tried to factory reset the device and it booted up into TWRP - the clerk made the comment "What in the world" but did not say anything. I had tried to factory reset it before returning and it would not work either.
rsktkr1 said:
I rooted and installed TWRP on this device and decided I wanted to get the SM-T330NU instead. I returned the T230 and the clerk tried to factory reset the device and it booted up into TWRP - the clerk made the comment "What in the world" but did not say anything. I had tried to factory reset it before returning and it would not work either.
Click to expand...
Click to collapse
If you power off the device and then boot up into download mode, connect the usb to your pc and run odin you can flash the factory stock image to the device using odin and that will reset the device to stock. Replacing TWRP with the factory recovery image and everything else. You can download the stock files for the device either by searching these forums or going to sammobile. Try starting with the oldest version available and update from there. I rooted and unrooted the SM-T230NU several times using this method and had no issues. Be patient. Allow the device 5 minutes to boot up after flashing the stock. Make sure the device has 80% charge or better before starting. Leave the device connected to the PC with odin open until you see a message in odin that reads, "passed".
chuman72486 said:
I was looking to factory reset my Tab 4 7.0 to sell, but since I've rooted it and installed TWRP, the process wasn't as simple as I'd have liked. I tried the standard Factory Reset function of TWRP, but it didn't do anything. I tried Wipe Data, still nothing. Then I did an Advanced Wipe and checked off everything, not realizing one of the options was to wipe /system. Now my Tab 4 keeps rebooting to TWRP, and the recovery also states "No OS is installed".
I'm currently downloading the new NH1 firmware from SamMobile and considering flashing it through Odin 3.09. Would this be the most effective method, considering I had no prior backup made to the tablet? Will this likely remove my root access and custom recovery? Is there a chance of tripping something like a Knox counter and bricking my device (happened once when I tried an old method to root my Note 3, Knox blocked part of the flash and left the system halfway between two OS images)
Click to expand...
Click to collapse
Just install deodexed rom from twrp
I don't think sm-t230's have Knox do they? You didn't kill your tablet just flash a stock ROM from sammobile. And you'll be a-OK
Sent from my SM-T230 using XDA Free mobile app

[Q] I9500 flash gone wrong, need help please

HI Guys,
I flashed the Lollipop 5.0.1 CHN firmware and rooted the phone to install the Google apps, then when the India Firmware came i tried to flash that via Odin, it failed. and bricked the phone, could get into download mode but all firmware i've tried fails.
i tried numerous thing to a point where i can now only get CWM- recovery or TWRP open recovery on the phone, and then it allows me to get back into download mode with swver A3, but Odin still fails almost immediately.
help would be much appreciated
regards
Brendan
Vergil069 said:
HI Guys,
I flashed the Lollipop 5.0.1 CHN firmware and rooted the phone to install the Google apps, then when the India Firmware came i tried to flash that via Odin, it failed. and bricked the phone, could get into download mode but all firmware i've tried fails.
i tried numerous thing to a point where i can now only get CWM- recovery or TWRP open recovery on the phone, and then it allows me to get back into download mode with swver A3, but Odin still fails almost immediately.
help would be much appreciated
regards
Brendan
Click to expand...
Click to collapse
So this means you can into Download Mode which is quite a good thing.
Now what you do is download the particular Kies for S4 from the OEM site and connect it when your phone is in Download or that wierd Yellow Triangle with the sign to connect to PC, and then kies will try to save ur phone.
came accross this http://forum.xda-developers.com/showthread.php?t=2269941
Odin completed success fully, but now phone just hangs just after it askes to select the OS language ps. i used the lollipop india rom with the pit in the mentioned post
install a custom recovery using odin like philztouch and do a full wipe to install new rom
will i need a new PIT file?, after full wipe just Odin and lollipop 5.0.1 as normal?

[Q] G901f rooted bricked after stock firmware lolipop flash

Actually it was not known to me that my g901f was rooted. I just flashed it with NEE stock firmware lolipop, which eventually bricked the set.
I tried Smart Switch manual insertion of Model and S/N, but it says no database verification. So i tried again odin 3.09 to flash with various firmwares which results in zero.
Set is in white screen mode, upon pressing power+lower vol+home it enters in downloading mode. I flashed 4 files + PIT of jovilonas but to disappointment. One strange thing I experienced that during flashing it always struck at image.ext.4 and failed, but I selected the T Flash option then it completed successfully but after reboot it is same as if there was no flashing at all. Before bricked it was having KitKat 4.4.2 and upon Kies software update check it showed country KSA Product Code NHK7 (as i recall but not sure about Product Code accuracy but at last there was 7, but dead sure about KSA as Country).
Please help me with flashable firmware link and proper procedure. Grateful to you.
____________________________________
Memory 1: as i have come to realize that my G901F was not Stock Rom Flashed and then Reflash to Root that ROM. It was already a Rooted Firmware Mod. Cause simply rooted Stock ROM when executed as Factory Reset it removes Root (as some one told me during my quest to unbrick it). Now it is clear to me that before flashing with Stock ROM, i factory restored the set but there was nothing changed and the root was there. Only issue was that it asks for wifi password whenever it restarts rather than storing it once.
Memory 2: There was no KNOX counter while it was on KITKAT 4.4.2. Neither in the Device Info nor in the Downloading mode (power+vol down+home). It always shows, ODIN MODE
MODEL G901F
System Binary Samsung official
System Status Custom

My Galaxy S4 stuck in system section in odin

Hello. I've got a problem with my S4. I had Andoid 5.0.1 on my Galaxy S4. I bought a new phone so i installed CyanogenMOD on my S4 just to see how it works. When i noticed that battery drain is super high (it wouldnt survive one night of doing nothing) i wanted to install android 4.3 because it was my first android on this phone and from what i remember S4 worked best with this version. I downloaded firmware from sammobile and i didnt use original samsung cable. Something went wrong. It failed like 0,5 sec after i clicked start. I couldnt start my phone (it said that firmware upgrade encountered an issue). and from this moment i cant install any firmware. Im using original cable now. I downloaded like 10 firmwares already from 4.2.2 to 4.3, 4.4 and 5.0.1. different countries (including my original Germany Vodafone). I managed to install it once but it got stuck after Galaxy S4 text ("Samsung" showed up and it kept blinking and blinking.). From this time it always got stuck on system.img.ext4 but not always on 50% for example. Sometimes 10%, 25%, 90%. Used versions of Odin: 3.07, 3.08, Odin3_v3.11.1
Okay. So:
1. Got S4 with Android 5.0.1
2. Installed CyanogenMOD (13 i think)
3. Tried to install 4.3 with not original cable and failed.
4. Tried to install 5.0.1 with original cable. Installed it but it got stuck on Samsung logo.
5. Tried to install various versions of android. It always got stuck on system.img.ext4 in System section of flashing with Odin.
Is there any way to fix that? I know that may be very chaotic but i hope you understand. Thank you.
After flashing 5.01 with Odin, did you perform a factory wipe before booting 5.01 for the first time?
No, my Odin was set to reboot my phone automatically
Anybody?
Hi,
Just trying to add some things:
1) Untick Auto Reboot before flashing.
2) After stock firmware successfully flashed, reboot manually to recovery mode by Home+Power+Vol(+) buttons.
3) Wipe data/factory reset.
You're ready to go.
EDIT: My bad. Got no idea about stucking on system.img.ext4.
Sent from my ASUS_Z00A using XDA Labs
You tried using kies and smart switch to perform an emergency recovery?
When flashing system, it fails or it just stops there and never proceeds?
You confirmed that the model number in download mode matches rom you are flashing?
You tried flashing with a pit file?
Can you flash twrp and another custom rom?
Kies doesn't see my phone after just plugging it in and after clicking emergency recovery. Doesn't matter if its in Download mode or just turned on with "Firmware upgrade encountered an issue..." error. Smart Switch too. Smart Switch gives me an error that my device isn't compatible with this software.
When flashing system it just stops and never proceeds.
In download mode i see this:
ODIN MODE
PRODUCT NAME: GT-I9505
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
CSB-CONFIG-LSB: 0x30
WRITE PROTECTION: Enable
eMMC BURST MODE enabled
And yes, im installing rom for my model.
I will try flashing with pit file and try to flash twrp and another custom rom and let you know. I won't be able to do this today.
I tried to flash rom the normal way (Spanish version, i chose it randomly) and it flashed my device. I was stuck in Samsung logo once again (after wiping cache and all data) but after like 2-3 restarts the system started. I don't know what was causing the problems and why Spanish version worked but Germany didn't. Thank you for all your help.

[HELP] AutoRoot in the last firmware.

Hi everyone, I wanted to put a root issue on the Galaxy S7 edge.
I installed via Odin the latest version of ITV PDA G935FXXU1DQIC and CSC G935FITV1DQI1.
Once you've finished flashing once, I put it back in Download Mode and always flash through Odin the latest version of AutoRoot.
However, the phone still hangs before loading with a screen that warns me that the integrity of the system has not been checked out. I had tried to disable all security settings several times, but nothing. Once I install the root the phone gives me an error telling me that to reset the device I should do a factory reset.
How can I fix it is what? With previous firmware it did not work out what.
ExileTM said:
Hi everyone, I wanted to put a root issue on the Galaxy S7 edge.
I installed via Odin the latest version of ITV PDA G935FXXU1DQIC and CSC G935FITV1DQI1.
Once you've finished flashing once, I put it back in Download Mode and always flash through Odin the latest version of AutoRoot.
However, the phone still hangs before loading with a screen that warns me that the integrity of the system has not been checked out. I had tried to disable all security settings several times, but nothing. Once I install the root the phone gives me an error telling me that to reset the device I should do a factory reset.
How can I fix it is what? With previous firmware it did not work out what.
Click to expand...
Click to collapse
If you are using Chainfire's Autoroot it wont work on Nougat.. if you use some third-party AutoRoot i can't help you.
Best way i can recommend to you is to flash latest TWRP and easly get root also you can flash some of great custom roms you can get here!

Categories

Resources