Database Users

I9505 no sound, no calls, cant flash with odin

Hi!
My phone is a standard samsung I9505 and i live in Sweden.
Everying i descripe here i have done with 2 diffrent usb cabels stock from s4 and s1 on 3 diffrent computors and in all usb ports. I have killed kies in taskmanager if its there and the phone comes up ok in Odin. I have tried it with odin vers. 1.85, 3.07 and 3.09.
Okey it all started with me flashing CWM recovery with odin and something whent wrong. I got a fail and then i flashed stock recovery and tried to install I9505_-_Official_Google_Edition_4.4.2_by_Jamal2367_Final-R1.2 via the stock bootloader and it failed. Then i got the black screen with "Firmware update encounterd an issue... kies..".
So i tried to flash I9505XXUEMKF_I9505OXXEMK4_I9505XXUEMKF but i only got auth fail on aboot.mdn. Then the only thing that worked for me was to flash I9505XXUAMDE-Stock-Recovery.tar.md5. Then the phone got back to life and stock firmware booted up. But this time it had no media sound and i was not able to recive or make phonecalls, black screen, laggy and no sound. But everthing els worked. So i did som factory wipes and cache but stil no sound.
I tried again to flash other stock fw but allways failed on aboot.mbn. I then tried to flash diffent recovery TWPR and CWM but none worked i the got "There is no PIT partition." i even tried to flash CSB_signed_Fusion3_EUR_0325_V2.pit but that fialed to with re-partion ticked (IIIIIIH) but i could still go to downloadmode after.
I also tried to do the emergency firmware stuff and firmware upgrade initialisation with Kies with no success.
After a while i finaly got CWM recovery 6.0.4.7 to flash. And now it that works. So i installed galaxy s4(I9505)Official_Google_Edition_4.3_MH5 via CWM recovery and it booted with the google logo and started optimizing apps but then it got stuck. I rebooted wiped and nothing, tried to install it again and wipe but it wont even come to the optimizing apps.
So i downloaded cm-10.2.0-jfltexx and installed (via cwm recovery) it and it works, but i still have no sound and cant recive or make any calls.
After this i have tried to flash(with odin):
- I9505XXUEMJ7_I9505VDSEMJ8_I9505XXUEMJ7_HOME.tar.md5
- I9505XXUEMKF_I9505OXXEMK4_I9505XXUEMKF_HOME.tar.md5 (again)
- I9505XXUENA4_I9505NEEENA1_I9505XXUENA4_HOME.tar.md5 (i think this one is the latest)
All donwloaded from sammobile or samfirmware.com.
All fails on aboot.mdn (fail Auth) and i get this in the phones download mode
WRITE PROTECTION: Enable
eWWC Burst control: Enable
Start [224, 1440]
SW. Rev. CHECK FAIL : fused :4, Binary : 3
(I have Knox warranty 0x1 after installing CWM recovery)
This happends no matter what in odin..
The only thing that works is Cm10.2.0 rom and thers is no sound.
What should i do?! This is the 3rd day without any calls or sound and i use the phone both in work (i have a small business) and at home.
Please Help!

Endombed said:
Hi!
My phone is a standard samsung I9505 and i live in Sweden.
Everying i descripe here i have done with 2 diffrent usb cabels stock from s4 and s1 on 3 diffrent computors and in all usb ports. I have killed kies in taskmanager if its there and the phone comes up ok in Odin. I have tried it with odin vers. 1.85, 3.07 and 3.09.
Okey it all started with me flashing CWM recovery with odin and something whent wrong. I got a fail and then i flashed stock recovery and tried to install I9505_-_Official_Google_Edition_4.4.2_by_Jamal2367_Final-R1.2 via the stock bootloader and it failed. Then i got the black screen with "Firmware update encounterd an issue... kies..".
So i tried to flash I9505XXUEMKF_I9505OXXEMK4_I9505XXUEMKF but i only got auth fail on aboot.mdn. Then the only thing that worked for me was to flash I9505XXUAMDE-Stock-Recovery.tar.md5. Then the phone got back to life and stock firmware booted up. But this time it had no media sound and i was not able to recive or make phonecalls, black screen, laggy and no sound. But everthing els worked. So i did som factory wipes and cache but stil no sound.
I tried again to flash other stock fw but allways failed on aboot.mbn. I then tried to flash diffent recovery TWPR and CWM but none worked i the got "There is no PIT partition." i even tried to flash CSB_signed_Fusion3_EUR_0325_V2.pit but that fialed to with re-partion ticked (IIIIIIH) but i could still go to downloadmode after.
I also tried to do the emergency firmware stuff and firmware upgrade initialisation with Kies with no success.
After a while i finaly got CWM recovery 6.0.4.7 to flash. And now it that works. So i installed galaxy s4(I9505)Official_Google_Edition_4.3_MH5 via CWM recovery and it booted with the google logo and started optimizing apps but then it got stuck. I rebooted wiped and nothing, tried to install it again and wipe but it wont even come to the optimizing apps.
So i downloaded cm-10.2.0-jfltexx and installed (via cwm recovery) it and it works, but i still have no sound and cant recive or make any calls.
After this i have tried to flash(with odin):
- I9505XXUEMJ7_I9505VDSEMJ8_I9505XXUEMJ7_HOME.tar.md5
- I9505XXUEMKF_I9505OXXEMK4_I9505XXUEMKF_HOME.tar.md5 (again)
- I9505XXUENA4_I9505NEEENA1_I9505XXUENA4_HOME.tar.md5 (i think this one is the latest)
All donwloaded from sammobile or samfirmware.com.
All fails on aboot.mdn (fail Auth) and i get this in the phones download mode
WRITE PROTECTION: Enable
eWWC Burst control: Enable
Start [224, 1440]
SW. Rev. CHECK FAIL : fused :4, Binary : 3
(I have Knox warranty 0x1 after installing CWM recovery)
This happends no matter what in odin..
The only thing that works is Cm10.2.0 rom and thers is no sound.
What should i do?! This is the 3rd day without any calls or sound and i use the phone both in work (i have a small business) and at home.
Please Help!
Click to expand...
Click to collapse
You can no longer downgrade to 4.3 stock rom mate it shows that you flashed the 4.4.2 kitkat.
The only thing that works is Cm10.2.0 rom and thers is no sound. Download and extract this File and flash the .Tar file via odin by Selecting Phone/Cp.

Repulsa said:
You can no longer downgrade to 4.3 stock rom mate it shows that you flashed the 4.4.2 kitkat.
The only thing that works is Cm10.2.0 rom and thers is no sound. Download and extract this File and flash the .Tar file via odin by Selecting Phone/Cp.
Click to expand...
Click to collapse
Thx man!!! It worked!!
3 days later and can tell you screamed of happieness!
I freakin love you m8te!!

Endombed said:
Thx man!!! It worked!!
3 days later and can tell you screamed of happieness!
I freakin love you m8te!!
Click to expand...
Click to collapse
No problem mate,Glad that helps have a nice day.
Sent from Hell ?

Same issue - any help?
Hi - I believe I've managed to run into the same problem as poster.
I have just flashed the new Echoe Rom for my I9505. I couldn't manage to get the correct modem file flashed (tried a few), so attempted to go back to my CWM backup (which was 4.2 based).
However once on my backup, I cannot make calls & there is no sound.
Any help is hugely appreciated.
Thanks

[Q] I9500 flash gone wrong, need help please

HI Guys,
I flashed the Lollipop 5.0.1 CHN firmware and rooted the phone to install the Google apps, then when the India Firmware came i tried to flash that via Odin, it failed. and bricked the phone, could get into download mode but all firmware i've tried fails.
i tried numerous thing to a point where i can now only get CWM- recovery or TWRP open recovery on the phone, and then it allows me to get back into download mode with swver A3, but Odin still fails almost immediately.
help would be much appreciated
regards
Brendan

Vergil069 said:
HI Guys,
I flashed the Lollipop 5.0.1 CHN firmware and rooted the phone to install the Google apps, then when the India Firmware came i tried to flash that via Odin, it failed. and bricked the phone, could get into download mode but all firmware i've tried fails.
i tried numerous thing to a point where i can now only get CWM- recovery or TWRP open recovery on the phone, and then it allows me to get back into download mode with swver A3, but Odin still fails almost immediately.
help would be much appreciated
regards
Brendan
Click to expand...
Click to collapse
So this means you can into Download Mode which is quite a good thing.
Now what you do is download the particular Kies for S4 from the OEM site and connect it when your phone is in Download or that wierd Yellow Triangle with the sign to connect to PC, and then kies will try to save ur phone.

came accross this http://forum.xda-developers.com/showthread.php?t=2269941
Odin completed success fully, but now phone just hangs just after it askes to select the OS language ps. i used the lollipop india rom with the pit in the mentioned post

install a custom recovery using odin like philztouch and do a full wipe to install new rom

will i need a new PIT file?, after full wipe just Odin and lollipop 5.0.1 as normal?

[Q] G901f rooted bricked after stock firmware lolipop flash

Actually it was not known to me that my g901f was rooted. I just flashed it with NEE stock firmware lolipop, which eventually bricked the set.
I tried Smart Switch manual insertion of Model and S/N, but it says no database verification. So i tried again odin 3.09 to flash with various firmwares which results in zero.
Set is in white screen mode, upon pressing power+lower vol+home it enters in downloading mode. I flashed 4 files + PIT of jovilonas but to disappointment. One strange thing I experienced that during flashing it always struck at image.ext.4 and failed, but I selected the T Flash option then it completed successfully but after reboot it is same as if there was no flashing at all. Before bricked it was having KitKat 4.4.2 and upon Kies software update check it showed country KSA Product Code NHK7 (as i recall but not sure about Product Code accuracy but at last there was 7, but dead sure about KSA as Country).
Please help me with flashable firmware link and proper procedure. Grateful to you.
____________________________________
Memory 1: as i have come to realize that my G901F was not Stock Rom Flashed and then Reflash to Root that ROM. It was already a Rooted Firmware Mod. Cause simply rooted Stock ROM when executed as Factory Reset it removes Root (as some one told me during my quest to unbrick it). Now it is clear to me that before flashing with Stock ROM, i factory restored the set but there was nothing changed and the root was there. Only issue was that it asks for wifi password whenever it restarts rather than storing it once.
Memory 2: There was no KNOX counter while it was on KITKAT 4.4.2. Neither in the Device Info nor in the Downloading mode (power+vol down+home). It always shows, ODIN MODE
MODEL G901F
System Binary Samsung official
System Status Custom

broken I9505 after downgrand from 6.0, looking for 3 files repair rom

Dear Friends,
I would kindly ask for help on my I9505. I got it with android 5.0 or 5.1 if I remember. After a while i flash it with crdroid 6.0. Almost everything was working fine, except bluetooth. I decided to back to oryginal rom, because there wasn't any problems. I flashed stock 5.0 for Poland, did the factory restart because got a botloop and finally it started.
but - there is no IMEI right now. When i type *#06# there is "none" and i can't reach any network. I tried to install some 4.4.2 but failed in odin at the start and it's botloop again.
I read a lot of here on xda but can't find right solution for me, also can't find 3 files room to install modem there. Please let me know what i can do. Thank You

Where did you get the stock ROM? You confirmed the model # in download mode is gt-i9505?

Thank U for reply. Yes it's a I9505 there You have what's on the screen in download mode.
PRODUCT NAME: GT-I9505
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: OFFICIAL
KONOX KERNEL LOCK: 0x0
KONOX WARRANTY VOID: 0x1
CSD...: 0X30
WRITE PROTETION: Enable
eMMC... mode enabled
Sorry but i downloaded and tested few roms and right now im consfused which one i installed - just simply downloaded from somwhere on xda

I wanted check what's going on right now and when i turn on device i got the screen "firmware upgrade encoutered an issue. Please select recovery mode in Kies and try again" - but Kies don't see the phone - just stuck on connecting

anyone could help plz?

The firmware can be flashed using Odin when the phone is showing the "firmware enountered an error" screen.
Download the latest stock ROM from sammobile.com and flash it on Odin.

lol i flashed once the last rom for my I9505 and wasn't work but it wasn't from sammobile.com (same name file but maybe was corrupted). Right now i downloaded lastest rom from sammobile.com, flashed with Odin and it finally works! Thanks a milion! Topic to close

LOS 14 Update Caused Recovery Bootloop

I am new to flashing and custom roms but i have had lineage OS installed for awhile on my old galaxy note 3 SM-N900W8. When i went to OTA update lineage it caused my note 3 to go into a recovery Bootloop. I could not actually boot into recovery or boot system it kept restarting. So i read some forums and watched some videos. It kept saying seandoid not enforcing. I went and got a original note 3 md5 file and put it into odin put my old phone into download mode and connected it to Odin Loaded the md5 file in to the AP section of odin and hit start. Now it says firmware upgrade encountered please select recovery mode in kies. Also at the top left it says
Current Binary: Samsung Official
System Status: Custom
Does anyone know how i could fix this or if i could reinstall a custom binary or kernel from lineage.
I would like to just get my old pictures off the phone. Or would i have to connect to kies and install original firmware and just re flash a new rom?
If i brick the phone i brick it i use a S7 now. I don't know if this makes sense but i might need some help.

Try flashing TWRP again.