Hello together,
I bougt a phone. It 's working well with Android 4.4.2. I would like to root it and update it to Android 5.0.1 with either the original rom or cyanogenmod.
The problem is hat the previous owner did something with the phone. I could not get into recovery mode (Vol Up + Home + Power ). In download mode I get the following error:
Could not do normal boot
odin mode
Current Binary: Custom
System Satus: Custom
Knox Kernel Lock: 0x0
Knox Warreny Void 0x1
Qualcomm secureboot: Enable
AP SWREV: S1 T1, R1, A1, P1
Write Protection: Enable
UDC Start
Buildnumber: KOT49H.I9506XXUCNI1
Basisbandversion
I9506XXXUCNF3
Is it possibel to reset the phone with the original rom and how? Where can I get it and which version is the right one?
How could I fix this? I searched a lot but could not solve the problem. Please help me.
Thank you very much.
Michael
- Just flash the stock rom through Odin.
or
- Install custom recovery and flash the custom rom you want.
That's it.
Related
hey everyone out there that can help me
i tried to root my phone but it stopped midway. then i got it working again, but my dataroaming was disabled. so i did a factory reset and now it is stuck in Odin mode.
i have red hundreds of threads on this put when i start up my phone it says:
Could not do normal boot
ODIN MODE
PRODUCT NAME: GT-I9506
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
QUALCOMM SECUREBOOT: ENABLE
RP SWREV: S1, T1, R1, A1, P1
WRITE PROTECTION: ENABLE
UDC Start
i have tried to pull out the battery and the sim card. it didn't work
i have tried reinstalling the stock firmware with odin3 v1.85
i have tried the same with samsung kies 3 it doesn't even recognise (sorry if mispelled) the device
please help
I would Odin flash a recovery and format everything on the phone before attempting to odin flash official firmware.
Make sure you are flashing the latest 4.4 that your carrier has released.
http://www.sammobile.com/firmwares/
Just flash a 4.4.2 stock rom true Odin that is for you device.
Hi. Samsung Galaxy S4 GT-i9506. Tried to root/install Lollipop 5.0.1 (I had 4.2.2 KitKat).
So everything failed miserably. As it stands now, I can ONLY enter download mode with the phone and in ODIN MODE. I can connect phone to PC and use odin on PC. Can NOT enter recovery mode, it fails and shuts down the device. Only download mode through vol.down+home+power button.
I just want to be able to use my phone, so can someone explain step-by-step what I need to do to get my phone working again? Full reset or anything like that doesn't matter, I have backup, I just want the phone to work again.
It says on the screen (Downloading... Do not turn off target!!) with an android logo.
Could not do normal boot.
ODIN MODE
PRODUCT NAME: GT-I9506
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
QUALCOM SECUREBOOT: ENABLE
RP SWREV: S1, T1, R1, A1, P1
WAITE PROTECTION: Enable
UDC START
I have Odin+3.09.
hi.
I get a new g7105 device with android 4.3
when I tried to flash (with odin) auto root or flash custom recovery- my recovery get locked.
i get the download screen and its write:
could not do normal boot
odin mode
product name: sm- g7105
current binary: custom
system status: custom
qualcomm secureboot: enable (csb)
warranty bit: 1
ap swrev: s1, t1, r1, a1, p1
write protection: enable
i just want to flash cm12 but i can get root premission or flash custom recovery.
thanks
First of all sm-g7105 doesn't have cm12 and if you want to root you can try it by a app called towel root it may work on jellybeans firmware
Hello guys,
Backstory(see my last thread (https://forum.xda-developers.com/general/help/samsung-galaxy-s5rooted-suddenly-stuck-t3674465).
Rooted S5 with 4.4.2 had some problems, random freezing etc. Then it suddenly got stuck in a recovery loop.
I managed to save all important data by flashing TWRP, and then wiped it and flashed 4.4.2 on it again.
I used the phone for about a week, then it suddenly started causing problems, it wouldn't charge anymore when it is booted up. I then tried to wipe it all again and restart the phone but it didnt help. I then tried flashing the newest Android version for the S5 on it. 6.0.1. and flashed the CF-Auto-Root file.
It worked but same problems: It doesn't charge while it's on. When I start it up it shows:
Set Warranty bit : kernel
When I turn it off and connect it to the power it will only show the battery sign with the flash(lightning sign) inside of it, then restart, then show it again, then restart, until infinity. I have even bought a new battery, this is has got to be some weird software thing.
When I enter into download/Odin mode it shows:
PRODUCT NAME: SM-G900F
CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID 0x1 (4)
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, R1, A1, P1
SECURE DOWNLOAD : ENABLE
UDC START
Is there anything I can do to return to stock, and make it work normally again or is there some hardware problem as well?
UPDATE:
It seems I made some progress, flashed 6.0.1 again and did the CF autoroot again.
"Set Warranty bit : kernel" is gone now, and Odin Mode now shows Samsung official as BINARY. Still doensn't charge though.
PRODUCT NAME: SM-G900F
CURRENT BINARY: Samsung Official
SYSTEM STATUS: CUSTOM
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID 0x1 (4)
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, R1, A1, P1
SECURE DOWNLOAD : ENABLE
UDC START
Mattson44 said:
Hello guys,
Backstory(see my last thread (https://forum.xda-developers.com/general/help/samsung-galaxy-s5rooted-suddenly-stuck-t3674465)...
Click to expand...
Click to collapse
Your best bet is to post this question within the following thread. Someone should be able to help you out or provide some guidance as to where to obtain it.
http://forum.xda-developers.com/showthread.php?t=2700073
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE
Hello , xda-developers,
I have a SM-N910F, and "played" today with the ROM and recovery, trying to root and put a custom recovery.
The Odin part worked smoothly, changed a couple of times the ROM but not succeeding the part with recovery.
After a wrong file being flashed (n915f-cwm-recovery-6.0.5.1(1128)), the screen mistakes the position of my finger onto screen.
Tried flashing stock ROM for it (COA-N910FXXU1ANK4_N910FCOA1ANK1-20141117 -Android 4.4.4 and N910FXXU1DRI2_N910FCOA1DQI1_COA - Android 6.0.1 ),no luck.
Screen not recognise corectly whereis my finger on screen, but the stilus work perfect, also mouse with OTG seems to work fine.
What is to be done to revert this.
Can be fixable?
THX!
find the solution on "https://www.youtube.com/watch?v=eAyZAa8ck8U" sorry for bother, although I would like to resolve the problem with the custom recovery and rooted with Magisk, what are the RIGHT steps
In IDIN mode I have on screen:
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-N910F
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
REACTIVATION LOCK: OFF
KNOX WARRANTARY VOID: 0x1 (4)
QUALCOM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, R1, A1, P1
SECURE DOWNLOAD : ENABLE
UDC START
MasterMarius said:
find the solution on "https://www.youtube.com/watch?v=eAyZAa8ck8U" sorry for bother, although I would like to resolve the problem with the custom recovery and rooted with Magisk, what are the RIGHT steps
In IDIN mode I have on screen:
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-N910F
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
REACTIVATION LOCK: OFF
KNOX WARRANTARY VOID: 0x1 (4)
QUALCOM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, R1, A1, P1
SECURE DOWNLOAD : ENABLE
UDC START
Click to expand...
Click to collapse
Open dialer and Dial *#2663#
Press TSP FW UPDATE
Wait until it finished
Reboot device
Done.
This will recalibrate your touch as normal to default.