So my phone have an update about 1gb and I just finished download it
But when I flash it via Odin I get this error ( see attachment)
And my phone show Secure check fail : aboot
Do I have to unroot my phone before using Odin
Syaoran Lord said:
So my phone have an update about 1gb and I just finished download it
But when I flash it via Odin I get this error ( see attachment)
And my phone show Secure check fail : aboot
Do I have to unroot my phone before using Odin
Click to expand...
Click to collapse
Are you sure you're updating the same baseband version?
where did you download it?
I download it via Sammobile
I just check it,it had 2 PDA version and I didn't know. one can update by Kies,one can't
Thank you so much
Syaoran Lord said:
I download it via Sammobile
I just check it,it had 2 PDA version and I didn't know. one can update by Kies,one can't
Thank you so much
Click to expand...
Click to collapse
Try using kies version its works fine in my SM-G530M
pd i also installed the lastest firmware (in my case G530MUBU1AOF1) with odin 3.07 grand prime mohan
Related
I have galaxy s4 when i flash new rom ....odin fail
Help pleas
ranor said:
I have galaxy s4 when i flash new rom ....odin fail
Help pleas
Click to expand...
Click to collapse
what appears Odin
who ROM want to flash
what you're doing
the question you have set,
thus no one can answer you
CleanSolidness said:
what appears Odin
who ROM want to flash
what you're doing
the question you have set,
thus no one can answer you
Click to expand...
Click to collapse
i used odin v3.09
i want to flash ROM android I9500XXUFNB3 kk
ranor said:
i used odin v3.09
i want to flash ROM android I9500XXUFNB3 kk
Click to expand...
Click to collapse
Hey There!
Please provide the error message that Odin displays.
1. Was your phone on Download Mode before you start flashing?
2. If the answer is yes to the above, did you try plugging the USB cable to another port on your PC/Laptop ?
3. If yes to the above, under Odin Message did it display as "Added!!" before you started flashing via PDA option ?
ranor said:
i used odin v3.09
i want to flash ROM android I9500XXUFNB3 kk
Click to expand...
Click to collapse
You cant flash that stock ROM coz you have a SGH-I337:
- Sig in and log in Sammobile.com
- Download and unzip this firmware: HERE (Dont try to flash other firmware coz ur phone haven't updates)
- Flash through Odin like in pic attached.
I am using note 3 i got it from hkk and i guess its rooted thats why i am not getting any update for 4.4 so can anyone help me with it
Model no SM-N9005
Android version 4.3
Baseband version N900TUVUBMI7
Build number JSS15J.N9005XXUBMJ3
SELinux status permissive
Wrong section of wrong forum. You need to be in the standard note 3 forum, not tmo (sm900t), and in the q&a/help section, not development.
Sent from my leanKernel 2.5 powered stock 4.4.2 SM-N900T
Thread moved
vaibhavj007 said:
I am using note 3 i got it from hkk and i guess its rooted thats why i am not getting any update for 4.4 so can anyone help me with it
Model no SM-N9005
Android version 4.3
Baseband version N900TUVUBMI7
Build number JSS15J.N9005XXUBMJ3
SELinux status permissive
Click to expand...
Click to collapse
why Baseband is N900T while PDA is N9005? What is your CSC and Model?
You can install this app and open menu --> 'Firmware Browser...' to obtain the latest firmware for your device.
I installed that app but nothing is happening my screen got freezed and lately its saying " Phone INFO isn't responsing do you want to close it
re: update
vaibhavj007 said:
I am using note 3 i got it from hkk and i guess its rooted thats why i am not getting any update for 4.4 so can anyone help me with it
Model no SM-N9005
Android version 4.3
Baseband version N900TUVUBMI7
Build number JSS15J.N9005XXUBMJ3
SELinux status permissive
Click to expand...
Click to collapse
You will not be able to get the ota or kies updates since your phone is rooted.
The best way to get the latest 4.4 Kitkat firmware is to go to SamMobile.com
and find the SM-N9005 official odin flash rom/firmware for your phone.
Good luck!
reallysorry but please can you tell me how to install it as i'm new in it and there are many issues in my current rom so please and if possible can you suggest me the rom i should install so that i can have all s-pen features
vndnguyen said:
why Baseband is N900T while PDA is N9005? What is your CSC and Model?
You can install this app and open menu --> 'Firmware Browser...' to obtain the latest firmware for your device.
Click to expand...
Click to collapse
CSC is N9005OXABMJ3
AP IS N9005XXUBMJ3
CP IS N900TUVUBMI7
vaibhavj007 said:
reallysorry but please can you tell me how to install it as i'm new in it and there are many issues in my current rom so please and if possible can you suggest me the rom i should install so that i can have all s-pen features
Click to expand...
Click to collapse
vaibhavj007 said:
CSC is N9005OXABMJ3
AP IS N9005XXUBMJ3
CP IS N900TUVUBMI7
Click to expand...
Click to collapse
No offense but this is the worst kind of people here...people who root their phones without reading every single important thread carefully, ending up messing their phone up and blaming it on their "new-ness", so we gotta spoonfeed them.
Regardless, go to Sammobile and download an N9005 stock ROM for your region. Then use Odin to flash it. Check using that app above to make sure you have an N9005 bootloader (first four characters are N9005) to make sure you have an N9005 or you'll end up with a brick. Or you could go to the flashable modems thread and flash an MJ3 N9005 modem in Odin.
vaibhavj007 said:
I installed that app but nothing is happening my screen got freezed and lately its saying " Phone INFO isn't responsing do you want to close it
Click to expand...
Click to collapse
You have to install SuperSU from the Play Store, and grant root permission for this app to work.
Otherwise it will wait for the permission accepting, once your phone has been rooted.
re: step by step guide
vaibhavj007 said:
reallysorry but please can you tell me how to install it as i'm new in it and there are many issues in my current rom so please and if possible can you suggest me the rom i should install so that i can have all s-pen features
Click to expand...
Click to collapse
Setting up Odin :
1. Make sure you have installed the Samsung usb drivers for windows.
2. Run Odin as administrator in windows.
Add the TAR/MD5 file in the PDA section/slot in odin.
4. Now that Odin is setup, put the phone in download mode and connect usb cable.
Power off the phone then press 'home+power+volume down' buttons at the same time.
Keep the buttons pressed till Download mode appears.
5. Now that Odin and the phone are setup, connect the usb cable from phone to computer.
Odin will detect the device and show something like [com:4l]
6. Click START in Odin.
7. The flash will take 5 minutes for a full flash on average
8. When the flashing is complete, DO NOT disconnect usb until Odin shows ' PASS '.
9. The phone will reboot. Unplug usb cable from phone and computer then go into
recovery mode and select "factory/data reset".
That's it. Happy flashing ..!!
The SM-9005 4.4.2 Kitkat firmware from sammobile comes with the Odin Windows utility.
Unzip the zip file from Sammobile into a new empty folder in your windows desktop and
you will see the TAR/MD5 firmware file and you will see Odin after unzip is completed.
You will need to create a free account on Sammobile to be able to download
the SM-N9005 Kitkat 4.4.2 official firmware zip file.
Just follow the step by step instructions above.
Good luck!
Misterjunky said:
Setting up Odin :
1. Make sure you have installed the Samsung usb drivers for windows.
2. Run Odin as administrator in windows.
Add the TAR/MD5 file in the PDA section/slot in odin.
4. Now that Odin is setup, put the phone in download mode and connect usb cable.
Power off the phone then press 'home+power+volume down' buttons at the same time.
Keep the buttons pressed till Download mode appears.
5. Now that Odin and the phone are setup, connect the usb cable from phone to computer.
Odin will detect the device and show something like [com:4l]
6. Click START in Odin.
7. The flash will take 5 minutes for a full flash on average
8. When the flashing is complete, DO NOT disconnect usb until Odin shows ' PASS '.
9. The phone will reboot. Unplug usb cable from phone and computer then go into
recovery mode and select "factory/data reset".
That's it. Happy flashing ..!!
The SM-9005 4.4.2 Kitkat firmware from sammobile comes with the Odin Windows utility.
Unzip the zip file from Sammobile into a new empty folder in your windows desktop and
you will see the TAR/MD5 firmware file and you will see Odin after unzip is completed.
You will need to create a free account on Sammobile to be able to download
the SM-N9005 Kitkat 4.4.2 official firmware zip file.
Just follow the step by step instructions above.
Good luck!
Click to expand...
Click to collapse
I made an accont on sammobile but i am not able to find the firmware for my phone as i dont know its region
vaibhavj007 said:
I made an accont on sammobile but i am not able to find the firmware for my phone as i dont know its region
Click to expand...
Click to collapse
Use my app Phone INFO and you will get all need info.
But at first you should install SuperSU if your phone has been rooted.
vndnguyen said:
Use my app Phone INFO and you will get all need info.
But at first you should install SuperSU if your phone has been rooted.
Click to expand...
Click to collapse
I did it says there is no SU binary installed and superSU cannot install it this is a problem if you just upgraded to android 4.3, you need to manually re-root-consult the relevant forums for your device
vaibhavj007 said:
I did it says there is no SU binary installed and superSU cannot install it this is a problem if you just upgraded to android 4.3, you need to manually re-root-consult the relevant forums for your device
Click to expand...
Click to collapse
Can you suggest me any ROM
re: regon - baseband
vaibhavj007 said:
I made an accont on sammobile but i am not able to find the firmware for my phone as i dont know its region
Click to expand...
Click to collapse
Go into the phone's settings then go to "About Device" and the region is the
BASEBAND so find the BASEBAND under settings "About Devce".
Good luck!
Misterjunky said:
Go into the phone's settings then go to "About Device" and the region is the
BASEBAND so find the BASEBAND under settings "About Devce".
Good luck!
Click to expand...
Click to collapse
i have checked it
Baseband version N900TUVUBMI7
Model no is SM-N9005
there is no rom which have such spec and i search a rom in tmobile usa with device N900T it have a similar baseband
I was trying to root my note 3 today using kingo root and i bricked my device and i don't no what to do i have watched all the YouTube videos on how to reinstall the software back to factory i have tried to do this also and i have a no luck every time i reinstall using Odin it gets to the end and fails. Additionally my device now will not show up on Samsung kies 3 so i'm a bit stuck.
I have used all versions of the Odin software.
1.85
3.07
3.09
3.10.6
Any help will be great thanks
What model
What firmware
What error message in Odin .
JJEgan said:
What model
What firmware
What error message in Odin .
Click to expand...
Click to collapse
SM-N9005
N9005XXUGBOA5_N9005VFGGBOA2_N9005XXUGBOA1_HOME.tar
The was no error message just said failed.
Possible bad download .
JJEgan said:
Possible bad download .
Click to expand...
Click to collapse
I got the tar from sammobile DOT com
Repeat possible bad download
download errors not source errors .
Hello
I'm trying to flash the official lollipop stock rom on my j500h
I'm downloaded this stock Galaxy-j5-SM-J500h-full-factory-ROM-5.1.1.zip on androidfilehost
I'm extrect the Rom 4 file
BL
AP
CP
CSC
AP CP AND CSC flashing parfect but BL is not flashing
Please GUYS help me how to flash the bootloader tar via Odin tool
My phone is fully dead
AAMIR_KH said:
Hello
I'm trying to flash the official lollipop stock rom on my j500h
I'm downloaded this stock Galaxy-j5-SM-J500h-full-factory-ROM-5.1.1.zip on androidfilehost
I'm extrect the Rom 4 file
BL
AP
CP
CSC
AP CP AND CSC flashing parfect but BL is not flashing
Please GUYS help me how to flash the bootloader tar via Odin tool
My phone is fully dead
Click to expand...
Click to collapse
What is the error?
JohnTryingToRoot said:
What is the error?
Click to expand...
Click to collapse
thanks for your reply
My phone is showing this ERROR on downloading... mode SW REV FAIL : [aboot]Fused 2 > binary 1
please tell me sir how to fix the problem
AAMIR_KH said:
Hello
I'm trying to flash the official lollipop stock rom on my j500h
I'm downloaded this stock Galaxy-j5-SM-J500h-full-factory-ROM-5.1.1.zip on androidfilehost
I'm extrect the Rom 4 file
BL
AP
CP
CSC
AP CP AND CSC flashing parfect but BL is not flashing
Please GUYS help me how to flash the bootloader tar via Odin tool
My phone is fully dead
Click to expand...
Click to collapse
Hi, so from what i understand you flash with Odin so i have Odin 3.12 you should take this one , put your phone into Download Mode and when you see your phone on odin ,click on AP and choose the xxxxxxxx.tar.md5 ,from what i know you need only AP , the rest are :
BL: your bootloader
CP: your modem
CSC: this is what features you get in some countries or carriers like Wi-Fi Calling.
Not a Pro , but that s what i can do for you
EDIT: And i don t think is a big of a problem i had some devices that were screwed by me and i gave them live again ) ,hope you make it buddy.
pantynpc said:
Hi, so from what i understand you flash with Odin so i have Odin 3.12 you should take this one , put your phone into Download Mode and when you see your phone on odin ,click on AP and choose the xxxxxxxx.tar.md5 ,from what i know you need only AP , the rest are :
BL: your bootloader
CP: your modem
CSC: this is what features you get in some countries or carriers like Wi-Fi Calling.
Not a Pro , but that s what i can do for you
EDIT: And i don t think is a big of a problem i had some devices that were screwed by me and i gave them live again ) ,hope you make it buddy.
Click to expand...
Click to collapse
As you said of the flash only AP xxxj500h.tar.m5d on I'm already tried but odin showing only one error fail Auth I'm downloaded latest firmware on sammobile website but all firmware showing same problems on my j500h
Downloading mode
SW REV FAIL : [aboot]Fused 2 > binary 1
please let me tell have any solutions to fix this problem
AAMIR_KH said:
As you said of the flash only AP xxxj500h.tar.m5d on I'm already tried but odin showing only one error fail Auth I'm downloaded latest firmware on sammobile website but all firmware showing same problems on my j500h
Downloading mode
SW REV FAIL : [aboot]Fused 2 > binary 1
please let me tell have any solutions to fix this problem
Click to expand...
Click to collapse
Make sure you just choose the CSC, PA and cache to flash thru odin dont try to flash the BL that is what will cause the revision check error.
Don't use from sammobile. Use one from the xda threads.
Maybe check ,idk if u will find something important... : https://forum.xda-developers.com/showthread.php?t=2785363
hello
today i updated my phone to G950FOXM3CRG1 using the ota update from here.
everything was fine until i decided to install TWRP
since than i got boot loop , so i tried to install full firmware from sammobile
i tried to install firmware with june path ( i cant fine full G950FOXM3CRG1 !!!!) and now my phone is stuck on " an error has...)
where can i find full G950FOXM3CRG1 or G950FOXM3CRG1 recovery ?
thanks !
lidor578 said:
hello
today i updated my phone to G950FOXM3CRG1 using the ota update from here.
everything was fine until i decided to install TWRP
since than i got boot loop , so i tried to install full firmware from sammobile
i tried to install firmware with june path ( i cant fine full G950FOXM3CRG1 !!!!) and now my phone is stuck on " an error has...)
where can i find full G950FOXM3CRG1 or G950FOXM3CRG1 recovery ?
thanks !
Click to expand...
Click to collapse
maybe this helps, firmware crg1
http://renovate-ice.com/firmware.html
Thor1964 said:
maybe this helps, firmware crg1
http://renovate-ice.com/firmware.html
Click to expand...
Click to collapse
thanks but i need stock recovery not twrp
now i cant install firmware from odin !!! its faild after 1 secend
lidor578 said:
now i cant install firmware from odin !!! its faild after 1 secend
Click to expand...
Click to collapse
you do not have root? This firmware can only be flashed with root.
wait a few days until the official firmware comes out
i do not have root
twrp destroyed my phone
what can i do so i could use it ?
lidor578 said:
i do not have root
twrp destroyed my phone
what can i do so i could use it ?
Click to expand...
Click to collapse
guess you have to wait until the official firmware from samsung comes out, then you can install the with odin.
I do not know any more, sorry
i think the reason i can not install version f7 with odin that the twrp destroyed something in my data
when i press start after 1 secend its failed
and its official firmware
but not G950FOXM3CRG1...one erlier...
lidor578 said:
i think the reason i can not install version f7 with odin that the twrp destroyed something in my data
when i press start after 1 secend its failed
and its official firmware
but not G950FOXM3CRG1...one erlier...
Click to expand...
Click to collapse
you use twrp without root ?? twrp = works only with root
lidor578 said:
i think the reason i can not install version f7 with odin that the twrp destroyed something in my data
when i press start after 1 secend its failed
and its official firmware
but not G950FOXM3CRG1...one erlier...
Click to expand...
Click to collapse
You have already upgraded your bootloader to version 3. You cannot flash older firmware now. You will have to wait for an official CRG1 firmware to be released
Sent from my SM-G950F using Tapatalk
use samfirm and zto region manual mode !
And you will can download the fw, i did it yesterday because i was stuck on blue screen and cant flash earlier fw because i updated through twrp fw of CRG1
https://4pda.ru/forum/index.php?showtopic=819057&st=7220
Thor1964 said:
maybe this helps, firmware crg1
http://renovate-ice.com/firmware.html
Click to expand...
Click to collapse
coroneta said:
use samfirm and zto region manual mode !
And you will can download the fw, i did it yesterday because i was stuck on blue screen and cant flash earlier fw because i updated through twrp fw of CRG1
https://4pda.ru/forum/index.php?showtopic=819057&st=7220
Click to expand...
Click to collapse
when i use samfirm i can download all the versions exept the new !
when i tried i got this
Checking firmware for SM-G950F/ZTO/G950FXXS3CRG1 /G950FOXM3CRG1/G950FXXS3CRG1 /G950FXXS3CRG1
Error: Could not send BinaryInform. Status code 200/400
Request was invalid. Are you sure the input data is correct?
can you upload for me the full firmware ?
You have to put the region in manual mode and write the name of the fw like in the thread i linked before of 4pda.ru !
coroneta said:
You have to put the region in manual mode and write the name of the fw like in the thread i linked before of 4pda.ru !
Click to expand...
Click to collapse
i did it = the same error
This is why you create a back up
Help ? I flashed the new firmware and now i cant use :
Samsung browser - secret mode
Secure folder
Samsung health
What can i do ? I didnt root my phone just flashed twrp
Now i have stock rom
lidor578 said:
Help ? I flashed the new firmware and now i cant use :
Samsung browser - secret mode
Secure folder
Samsung health
What can i do ? I didnt root my phone just flashed twrp
Now i have stock rom
Click to expand...
Click to collapse
Installing twrp trips your Knox.
So you never be able to use secure folder, s health etc ...
Sent from my Samsung Galaxy S8 using XDA Labs
lidor578 said:
Help ? I flashed the new firmware and now i cant use :
Samsung browser - secret mode
Secure folder
Samsung health
What can i do ? I didnt root my phone just flashed twrp
Now i have stock rom
Click to expand...
Click to collapse
Don't know if still helps but some custom roms let you use s health an other apps that got locked by tripped knoxx but in regards to secure folder it's lost