[Q] - Galaxy S 4 Q&A, Help & Troubleshooting

Hallo, this is my first post in such amazing forum. I have a Samsung galaxy s4 gt-i9500 with the below specification
android 4.3
kernel 3.4.5-1875800 [email protected] #1 mon Oct 14 17:56:57 KST 2013
build number : jss15j.i9500xxuemj5
USB port is not working when connecting to pc but it charging well . Which made it a special case.
All what I want to achieve is rooting my device then upgrade it or use a custom rom. Since usb port is not working, it gave me hard time.
what I have did :
1 trying to fix usb port I have used every method ( changing usb cable original one , *#0808# mpt , Samsung drivers , kies 3 , USB Debugging Mode is enabled.)
2 – trying to root without pc tried (TowelRoot keep getting “Phone Isn't Supported" changing code and older version not solving my problem . Besides TowelRoot, I used some chines
apps but not getting anywhere.
so please help me root my device
thanks in advance

Check the usb charging port..
Sent from my SCH-I535 using Tapatalk

chukwumadavid84 said:
Check the usb charging port..
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
yes I am consider that as last solution , but before that I will try to install new rom perhaps the 4.3 causing the problem

snpay said:
yes I am consider that as last solution , but before that I will try to install new rom perhaps the 4.3 causing the problem
Click to expand...
Click to collapse
It's 100% rom unrelated. It's your usb port that is malfuntioning. Try to clean it.
Your pc doesn't detect anything when you connect your phone in download mode?

Related

Facing troulbe in connecting my SAMSUNG GALAXY S4 GT- I9500

HI GUYS..! M NEW TO THIS FORUM SO KINDLY IGNORE MY NEWBIE MISTAKES
SO HERE IT GOES...
I HAVE A THREE MONTH OLD SAMMY'S GS4 ND I USUALLY KEEP IT UPDATED....
THE latest kernel is 3.4.5-1011208 TUE JUL 2.
LAST WEEK AGO IT WAS WORKING LIKE A CHARM BUT SINCE THEN I HAVE NOTICED AN UNUSUAL PROBLEM. THAT IS IT DOES'NT SHOW UP IN MY PC WHENEVER I TRY TO CONNECT IT THROUGH USB (MEDIA DEVICE OPT) ND IT ALSO DOES'NT SHOW UP ITS ICON IN THE
MY COMPUTER ZONE... I HAVE TRIED EVERYTHING FROM REINSTALLING THE DEVICE'S USB DRIVERS ND GETTING IT COMPLETELY REFRESHED..
BUT I HAVE FAILED... THE ONLY THING THAT WORKS IS ALTERING THE DEVICE'S SETTINGS IN DEVICE MANAGER. BUT THAT WORKS ONLY ONE TIME. I HAD TO RECONNECT THE DEVICE AND DO THESE SAME STEPS TO GET IT WORK AGAIN
PLZ HELP GUYS...!!!!!!
Do you have USB debugging enabled? You are also in the wrong thread if you have the I9500 this is a Sprint S4 thread.
Sent from my Sprint Galaxy S4 using Tapatalk 4 Beta
Kakewaheguru said:
HI GUYS..! M NEW TO THIS FORUM SO KINDLY IGNORE MY NEWBIE MISTAKES
SO HERE IT GOES...
I HAVE A THREE MONTH OLD SAMMY'S GS4 ND I USUALLY KEEP IT UPDATED....
THE latest kernel is 3.4.5-1011208 TUE JUL 2.
LAST WEEK AGO IT WAS WORKING LIKE A CHARM BUT SINCE THEN I HAVE NOTICED AN UNUSUAL PROBLEM. THAT IS IT DOES'NT SHOW UP IN MY PC WHENEVER I TRY TO CONNECT IT THROUGH USB (MEDIA DEVICE OPT) ND IT ALSO DOES'NT SHOW UP ITS ICON IN THE
MY COMPUTER ZONE... I HAVE TRIED EVERYTHING FROM REINSTALLING THE DEVICE'S USB DRIVERS ND GETTING IT COMPLETELY REFRESHED..
BUT I HAVE FAILED... THE ONLY THING THAT WORKS IS ALTERING THE DEVICE'S SETTINGS IN DEVICE MANAGER. BUT THAT WORKS ONLY ONE TIME. I HAD TO RECONNECT THE DEVICE AND DO THESE SAME STEPS TO GET IT WORK AGAIN
PLZ HELP GUYS...!!!!!!
Click to expand...
Click to collapse
Along with checking your USB debugging setting, you may want to consider uninstalling/reinstalling drivers.
and your specific device over here http://forum.xda-developers.com/forumdisplay.php?f=2164 maybe someone else has had the same issue...
GiantJay said:
Do you have USB debugging enabled? You are also in the wrong thread if you have the I9500 this is a Sprint S4 thread.
Sent from my Sprint Galaxy S4 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Not sure, but they certainly have the CAPS lock enabled... :crying:
I would do the same to make sure USB debugging is enabled. If non of this works I would unroot the phone and take it to sprint .
Sent from my SPH-L720 using Tapatalk 4 Beta
THANK U GUYS FOR SUCH WONDERFUL RESPONSE.....!!!! :good:
WITH U GUYS AROUND I DON'T HAVE TO WORRY ABOUT BY TECH PROBS
SO I TRIED ENABLING USB DEBUGGING MODE.. IT WAS STILL THE SAME AND SINCE M FROM INDIA, I DONT HAVE SPRINT, AT&T OR VERIZON
SO M STUCK WITH VODAFONE ND ONCE AGAIN THANX GUYS FOR RESPONDING SO QUICKLY

[Q] Wierd USB Sync/Charge Issue

Hi i have a GT-i9500 that recently has started acting really weird, the symptoms are.
Computer does not detect the phone, not even as an unrecognized device. It doesn't matter if its on, recovery or download mode.
After it goes to low Battery mode it won't charge with any 2.0 or 2.1 Amp Charger (tried car, iPad and Samsung original). It just charges with 0.5 amp charger (Huawei G510) or connected to a USB 2.0 port.
I have seen issues where the phone display a warning in the screen when charging with the power off, this is not the case, there are no warnings, the device works perfectly normal if you leave out the usb charging and syncing issue, battery lasts as it always has, no overheating, etc.
Changing charger or cord gives the exact same result
The issue was noticed after updating to 4.3 I9500UBUEMJ8
Developer options are enabled, so is USB Debugging
Any help will be greatly appreciated.
Check the huawei charger and it is not charging either, it just works with the laptop USB, any ideas?
Fuanda said:
Check the huawei charger and it is not charging either, it just works with the laptop USB, any ideas?
Click to expand...
Click to collapse
Uncheck USB debugging, reboot ur phone and try again.
EDIT: Where are u from? Maybe is problem of your firmware.
Joku1981 said:
Uncheck USB debugging, reboot ur phone and try again.
EDIT: Where are u from? Maybe is problem of your firmware.
Click to expand...
Click to collapse
Hey joku thank for the reply, I tried disabling USB debugging but the result was the same after reboot. I'm from Colombia, the 4.3 i'm using is brazilian but colombian FW are brazilians localized it's usually the same baseband and all.
Fuanda said:
Hey joku thank for the reply, I tried disabling USB debugging but the result was the same after reboot. I'm from Colombia, the 4.3 i'm using is brazilian but colombian FW are brazilians localized it's usually the same baseband and all.
Click to expand...
Click to collapse
Go to Apps - Settings - More - About device and make us a beaty screenshot pls
Joku1981 said:
Go to Apps - Settings - More - About device and make us a beaty screenshot pls
* Are u using Comcel?
EDIT: The problem becomes in Colombia didn't arrive the android 4.3
Click to expand...
Click to collapse
My network operator is indeed claro, the phone was unlocked international it didn't come with claro branding obiously. That's why i used brazilian Fw because i usually have good signal with brazilian and trinidad y tobago FW on booth my old gs2 and gs3
Fuanda said:
My network operator is indeed claro, the phone was unlocked international it didn't come with claro branding obiously. That's why i used brazilian Fw because i usually have good signal with brazilian and trinidad y tobago FW on booth my old gs2 and gs3
Click to expand...
Click to collapse
I found the correct firmware for ya. Indeed to Colombia didnt arrive the 4.3. And sorry for dissapoint u but u are using wrong firmware coz Colombia have own firmware for unlocked devices: - DOWNLOAD HERE - (but this is android 4.2.2)
Joku1981 said:
I found the correct firmware for ya. Im sorry I was wrong. Indeed to Colombia didnt arrive the 4.3. And sorry for dissapoint u but u are using wrong firmware coz Colombia have own firmware: - DOWNLOAD HERE - (but this is android 4.2.2)
Click to expand...
Click to collapse
Yes but that doesn't solve the problem of the phone not being detected by the PC so i can't use odin or KIES so firmware changing is hardly an option unless i use something like mobile odin
Fuanda said:
Yes but that doesn't solve the problem of the phone not being detected by the PC so i can't use odin or KIES so firmware changing is hardly an option unless i use something like mobile odin
Click to expand...
Click to collapse
Well. I think u are wrong but anyway the firmware u are using uses Kies 3 (android 4.3). Try to install Kies 3 and the drivers again. How u updated ur phone to MJ8 if u couldnt use Kies?
Joku1981 said:
how u updated ur phone to MJ8?
Click to expand...
Click to collapse
I used Odin, I had no problem until then but 2 weeks ago it started acting up. I read around and found that some people have been having charging issues after 4.3 tought it doesn't look like a widespread issue.
Joku1981 said:
Well. I think u are wrong but anyway the firmware u are using uses Kies 3 (android 4.3). Try to install Kies 3 and the drivers again. How u updated ur phone to MJ8 if u couldnt use Kies?
Click to expand...
Click to collapse
the problem is that the pc won't detect the phone, ther is no driver install, no device o device managment, no drive mounting, etc. so obiously kies 2 o 3 won't detect the phone
Fuanda said:
the problem is that the pc won't detect the phone, ther is no driver install, no device o device managment, no drive mounting, etc. so obiously kies 2 o 3 won't detect the phone
Click to expand...
Click to collapse
Maybe this help u: HERE
Joku1981 said:
Maybe this help u: HERE
Click to expand...
Click to collapse
Done that but nop, it didn't help, the damn thing doesn't charge from the wall or sync to the pc. it only charges from a usb port but no detection.

Galaxy Note 3 charging proplem!!!!

hey guys
i hope you all enjoyin the note 3 but recently i tried charging my note 3 sometimes it charges sometimes its not and it says dock is connected btw this happend to me in the note 1 back then so i decided to try cleanin the the usb on my phone wih a soft toothbrush or anything similar nothing worked so all what i have left is to get on back to the warrenty but the proplem is i rooted my phone using cf-root i worried they will cancel my warrenty but i noticed when i was using the firmware that it came with it had no warrenty bit 1.0 under download mod but now on the mk2 i have that so can i downgrade to mi5 so the warrenty bit should be gone and it will say official with hard rest without root
so what i need help about
is how to downgrade to mi5 using mobile odin tar version also remember i cant using pc odin because i cant connect my phone to my pc it says the dock is connected :S
thank you all
dannycanrock said:
hey guys
i hope you all enjoyin the note 3 but recently i tried charging my note 3 sometimes it charges sometimes its not and it says dock is connected btw this happend to me in the note 1 back then so i decided to try cleanin the the usb on my phone wih a soft toothbrush or anything similar nothing worked so all what i have left is to get on back to the warrenty but the proplem is i rooted my phone using cf-root i worried they will cancel my warrenty but i noticed when i was using the firmware that it came with it had no warrenty bit 1.0 under download mod but now on the mk2 i have that so can i downgrade to mi5 so the warrenty bit should be gone and it will say official with hard rest without root
so what i need help about
is how to downgrade to mi5 using mobile odin tar version also remember i cant using pc odin because i cant connect my phone to my pc it says the dock is connected :S
thank you all
Click to expand...
Click to collapse
Sorry mate you can't downgrade any more Sammy won't allow it
Have you turned on usb debugging
jaythenut said:
Sorry mate you can't downgrade any more Sammy won't allow it
Have you turned on usb debugging
Click to expand...
Click to collapse
opsss
r u sure about that not even a single way ?
dannycanrock said:
opsss
r u sure about that not even a single way ?
Click to expand...
Click to collapse
Nope not possible
What about usb debugging have you turned it on
Yes I did nothing is working
Sent from my SM-N900
does any one know how much the usb port cost ?

Error Initializing USB on SM-N9005

Dear All
Hey how are you guys? Almost a month user of this amazing android device note 3 LTE version in UAE.
Now I have updated this device via OTA, not thru Kies and now I am on kitkat 4.4.2
Not rooted and everything is on stock, don't want to trip on Knox
I got 1 minor glicth I am experiencing each and every time I boot and reboot my note 3 LTE version
it tells me that;
"Error Initializing USB"
What does this mean? I tried to transfer data back and forth to my PCs Laptops but USB functionality seems ok,
I am just afraid maybe this is hardware problem?
Can someone please Enlighten me on this minor issue?
Rgards,
Jes
Uhm anyone can help a brother out?
It is not really a big problem but until this time of writing, message still appears
"error intializing USB"
freaks me out knowing my phone is all stock ROM with paid apps...
jcagara08 said:
Uhm anyone can help a brother out?
It is not really a big problem but until this time of writing, message still appears
"error intializing USB"
freaks me out knowing my phone is all stock ROM with paid apps...
Click to expand...
Click to collapse
Don't know the cause, but I am getting the same message.
I am rooted but running mainly stock.
Not aware of any problems caused by this.
Googled and found your xda thread
Sent from my SM-N9005 using XDA Free mobile app
It's best to update your firmware again with Odin.
Afraid to use ODIN
kenny1991 said:
It's best to update your firmware again with Odin.
Click to expand...
Click to collapse
but nowadays I am afraid to use ODIN as it might trip my KNOX, I still want my warranty at this point..
I have had all my times before in modding and flashing roms from galaxy s1 until my nexus 4 but I don't have the time and courage anymore...
What to do what to do?
kenny1991 said:
It's best to update your firmware again with Odin.
Click to expand...
Click to collapse
My Knox bit has been set for over six months. I have no fear of using Odin.
I have reflashed with Odin 3.09
It didn't fix the problem.
Having said this, other than the error message I haven't had any issues relating to connection to pc via usb including usb 3 mode
Or connection via usb otg to usb dac.
Sent from my SM-N9005 using XDA Free mobile app
paul_59 said:
My Knox bit has been set for over six months. I have no fear of using Odin.
I have reflashed with Odin 3.09
It didn't fix the problem.
Having said this, other than the error message I haven't had any issues relating to connection to pc via usb including usb 3 mode
Or connection via usb otg to usb dac.
Sent from my SM-N9005 using XDA Free mobile app
Click to expand...
Click to collapse
Well how are you guys doing? Couple of weeks back I installed some Samsung OTA updates and so far that error prompt in every restart and start up made by the Note 3 is gone now!!
Furthermore, we are now able to root even with the latest stock firmware thru towelroot by none other than the greatest mr. geohot!
Donate to him and give homage!
Root and defeat Samsung KNOX!!!

[Q] Galaxy S5 OTG problems, need assistance

Hey friends here, since a few days i´m a proud user of the Galaxy S5 (Android 4.4.2, SM-G900F, Kernel: 3.4.0-2089850 Build KOT49H.G900FXXU1ANG2, rooted with chainfires root) .. for now i have only one problem .. i want to use an otg adapter to get access to my usb sticks...
first i tried it with an usb-2 otg adapter ... tried it with 5 different usb sticks, ntfs, fat, fat32, exfat ... none of them worked.. s5 said something like Usb memory empty or damaged .. with ef explorer i gained only read access ..
tried the same cable and same sticks with my s3 mini .. works directly read/write
but i need write access ... so i bougth an mini-usb-3 otg cable .. tried it with my s5 .. same as before. ..
has anyone an idea ? my device is from german celluar provider O2 ... but i dont believe that there are some modifications that prevents from using the otg functionality ..
any ideas ?
webmin said:
Hey friends here, since a few days i´m a proud user of the Galaxy S5 (Android 4.4.2, SM-G900F, Kernel: 3.4.0-2089850 Build KOT49H.G900FXXU1ANG2, rooted with chainfires root) .. for now i have only one problem .. i want to use an otg adapter to get access to my usb sticks...
first i tried it with an usb-2 otg adapter ... tried it with 5 different usb sticks, ntfs, fat, fat32, exfat ... none of them worked.. s5 said something like Usb memory empty or damaged .. with ef explorer i gained only read access ..
tried the same cable and same sticks with my s3 mini .. works directly read/write
but i need write access ... so i bougth an mini-usb-3 otg cable .. tried it with my s5 .. same as before. ..
has anyone an idea ? my device is from german celluar provider O2 ... but i dont believe that there are some modifications that prevents from using the otg functionality ..
any ideas ?
Click to expand...
Click to collapse
I couldn't help but notice that you say your S3 MINI has OTG !!! I've got an S3 Mini and OTG just doesn't work. And I tried everything from the Internet to get it working
Sent from my " Black Beauty " using XDA Premium 4 mobile app
Oh, i doesnt know that... I have cyanogenmod installed...
Sent from my SM-G900F using XDA Free mobile app
I can give you more Details later that Day
Sent from my SM-G900F using XDA Free mobile app
Still nobody an idea why otg did Not work with my SM-G900F?
Sent from my SM-G900F using XDA Free mobile app
Sent from my SM-G900F using XDA Free mobile app
Same problem otg s5 not working

Categories

Resources