My touch screen has been getting out of alignment quite often. 3 or 4 times a day. I'll go to use it after leaving it on standby, and the touch screen alignment will be off by a half centimeter or more. its making very difficult to use. Sometimes very difficult to even get to the settings screen to realign it. I'm using a screen protector and to use my fingers instead of the stylus often. could have of this be having an affect? or does anyone have any idea whats goign on? thank you for any help you can give me.
Dan
I had a similar problem as well. Its kinda scary. Do you think its a software error? or could it be hardware *gulp*
I had this problem with some devices I issued out at work. I put screen protectors on them, and all kind of weirdness happened, and the screen getting out of alignment was one of them. I removed the screen protectors, and the problem went away.
Wizard platform has often that claim from many users. I'm not sure if working without screen protector is suitable for you and don't know it will help. In my case it did not.
The problem of kJAMs is related to the screens HTC used on this version. Unfortunately there is not software remedy. Some users attempted to change their devices under guarantee. Some are telling newer ROMs make the error less frequently.
You may also use "fire button + messaging button" combination as a shortcut to screen alignment page if you must live with this. Better than nothing ?!
fixed my qtek 9100
Well my wizard used to go out of alignment a lot. But I basically ruined it when I stuck it in my golf bag one day and let it get partially crushed while half-open...
The screen started to flicker a lot (in addition to not registering touch inputs). after a week it was unusable except by me since I knew where to push to get it to work.
Anyways, I gave up and asked around Hong Kong for people who can fix these PDAs. I found a store that offered to bring it to a specialist (no name given) for $380 hkd (~$50USD). Figured I had nothing to lose.
It actually works almost like new now. The slider is tighter, and the screen doesn't go out of alignment at all. I'd almost say its perfect except the "specialist" "broke" my volume slider when fixing it. Its not major so I decided against taking it back to the store for further repairs (3 month warranty on their work). But it took 3-4 days for them to fix.
I figure someone with the screwdrivers and stuff can probably fix your problem. But I didn't have the guts to try it myself...
Four things you can do to help
1. After time dust etc... gets under the rim of the screen and adds to the misalignment problem. Get a piece of paper and put the corner under the rim and get all the dirt out.
2. Sometimes software causes the misalignment - in my case it was using vjtoggletoday - so check or your software particular ones that change your today screen e.g. wisbar etc...
3. You could do a hard reset and try device in factory state for a while to see if it is a software or hard ware problem
4. Update to the latest rom.
Thanks for your help guys. Even though i didn't like your answers. I tried cleaning dust from under the border of the screen. It worked well for now. but it hasn't been more than 12 hours. I hope it continues. If i cant get it to stop i might have to sell my phone on ebay. they seem to go for only 50 dollars less on ebay than i payed for it in the first place. I hate to ask this question. but what could i replace this phone wiht that wont have this problem. and has windows? Basically what would you suggest as a replacement. And not the TytTn because i dont think i'll be able to afford that one.
Thank you.
lets hope that i dont have to fish dust out of my phone every day.
Hey guys i searched these forums and i searched on google, couldn't find any information. I dropped my phone today from less than 1 foot and it turned off and when i tried turning it on my entire screen was white except for the top which had black lines and you could tell the phone was responsive because of the way the lines moved. What do you guys suggest i do? I can't figure out a way to make my screen work normally.
Your screen is broken, simple as that. Time to get a replacement!
Where exactly do i get one? And what is the part called which i need to replace? My phone doesnt even barely have scratches and my screen stopped working -.-. I hate my life.
FuMMoD said:
Where exactly do i get one? And what is the part called which i need to replace? My phone doesnt even barely have scratches and my screen stopped working -.-. I hate my life.
Click to expand...
Click to collapse
Ummm... T-mobile would be a great place to start... Just tell them it stopped working. Unless you bought it off warranty or without insurance, then you can buy it or any part for it where ever you can find it.
Yeah, no warrenty on it. What is the part called though i have no idea what the screen part is called so i can order the part.
bump. anyone?
You might need an LCD replacement part for the G1 if it is damaged... Other possibles could be the ribbon cable somehow got dislodged/damaged so you're not getting an image. Can you still make calls from it?
Yes it receives calls, its just the screen. would this be the replacement? http://cgi.ebay.com/OEM-LCD-Screen-...ries?hash=item43994d9bc5&_trksid=p3286.c0.m14
bumping for help
Ok, I have done some searching and I am still not sure of the answer to my question.
I have a HERM 100. I broke the screen on accident, but it was having the WSOD problem anyway. I still love the phone and I am trying to fix it.
First question is I have the screen with the P/N HTC60H00037-01M. I have looked several places on ebay, and the only ones I can find selling this exact screen are almost 2 times as expensive. Most if not all the others are saying this screen will work HTC60H00037-00M
Here are the links
The cheaper one with -00M on the end in one of the pictures.
The more expensive one with the EXACT same number as my screen in the pic.
Will the cheaper one work in my phone or is there a real difference between the two screens.
Oh, and does anyone know the best way to get a chip reflowed? I have been watching and reading the WSOD thread, and the only option that seems to fix the problem permanently. I am not able to do this myself I don't think, but if anyone has a surefire way to do this at home I am willing to listen, I just want my favorite phone back.
Chris
5.8LImportEater said:
Ok, I have done some searching and I am still not sure of the answer to my question.
I have a HERM 100. I broke the screen on accident, but it was having the WSOD problem anyway. I still love the phone and I am trying to fix it.
First question is I have the screen with the P/N HTC60H00037-01M. I have looked several places on ebay, and the only ones I can find selling this exact screen are almost 2 times as expensive. Most if not all the others are saying this screen will work HTC60H00037-00M
Here are the links
The cheaper one with -00M on the end in one of the pictures.
The more expensive one with the EXACT same number as my screen in the pic.
Will the cheaper one work in my phone or is there a real difference between the two screens.
Oh, and does anyone know the best way to get a chip reflowed? I have been watching and reading the WSOD thread, and the only option that seems to fix the problem permanently. I am not able to do this myself I don't think, but if anyone has a surefire way to do this at home I am willing to listen, I just want my favorite phone back.
Chris
Click to expand...
Click to collapse
Well at least they are both made by Toppoly and that is the crucial thing because different manufacturers use different digitizer circuits:
http://forum.xda-developers.com/showpost.php?p=3372952&postcount=4
NB - This link is for reference only it was written for another Hermes owner who had bought a Hitachi part.
So I think you should be ok with the cheaper one - but I wouldn't put a 100% guarantee on that. (My understanding is that it should be ok though).
Obviously buy from a company that has put in writing that it works ok - just in case a return is needed.
Regarding reflowing the chip. You can experiment with an oven (though I wouldn't like to guess the temp or length of time) - and remove the plastic layer from the keys side. To be honest though, I'd look for a part on ebay or a device being parted out here - because if you try the oven method, you'll probably need a new part anyway
Mike
Ok, I got the cheaper one, and put the phone together. I am having a small problem. I think it is related to the WSOD issue now. After replacing it I put the phone together and it was working but the screen was very white. There were colors and objects on it but they were very hard to see, you had to look from an angle. After charging it a while and working with it (and thinking I screwed up again) I got the screen to work with some pressure on the right side. I am thinking that is the connection for the screen that you almost bend backwards. I am going to re examine that, and look locally for someone who will reflow my chip. This must be the problem.
At first I was not sure but now I have finally gotten a few minutes of non WSOD use out of it, so indeed the cheaper one WILL work.
Again, thanks mike, you are the man. I am certain I can find a dunked 8525 that will allow me to get my WSOD issue fixed.
-to sum up, the cheaper screen WILL work! good times.
Chris
touchscreen was working today morning, took battery out for 2 hours, turned it back on and it was working abit weird, and now i cant press any touchscreen buttons atall!
So no softkeys (pick call, home etc.) and nothining on the big screen! I can turn on the phone, press the power button and volume buttons, see my home screen get calls etc.. hard reset twice, took battery out, nothing does it .. gonna try flash it but dont think itll do it ... and ideas?
Im in uk aswell if that makes a diff
Dear All,
I have similar problem. Usuallí I use on my HD NRG ROM. About 3 weeks ago I updated to the latest NRG WM 6.5 23xxx ROM with Sense 2.5 Maxmanila version, and since this upgrade the touch screen position moving randomized up or down from 2 mm to 30mm!!! After this ROM I tryed updating each newer version, but not changed nothing. I need realign the screen about 10 times / day!!! The phone I never dropped or cracked.
Can help me somebody what happened with my HD?
I had this happen to me yesterday. I was surfing on my phone as per the norm. Put my phone down. Got a txt, picked it up and it wouldnt allow me to access it. I thought it must be a freeze as it has happened occasionally.
So I restarted.............and nothing. No response AT ALL from the touch screen.
I have noticed the oily spot problem on the most part of my screen, and thescreen doesnt have that little give it used to when using it (paranoia possibly)
So I can only assume something has given within the screen. Ive been searching all day on the internet for causes and fixes but nothing has come up.
The volume and power buttons work but I cant do anything at all with the phone as its obviously all touch based.
Is this a screen replacement job then or is the whole phone goosed?
Roheelshah if you turn your phone off do you have the massive oily screen thing?
Any help is most appreciated....
I had the same thing, a oily spot, but it was there for months, then i noticed another new spot (looked like a tiny tiny burn) and thats when it stopped working completely... ive ordered a new screen which should be comming in a few days, im hoping thats the issue
will let you know if it works ....
keep me updated if you find anything
thanks!
NECROSTONE said:
I had this happen to me yesterday. I was surfing on my phone as per the norm. Put my phone down. Got a txt, picked it up and it wouldnt allow me to access it. I thought it must be a freeze as it has happened occasionally.
So I restarted.............and nothing. No response AT ALL from the touch screen.
I have noticed the oily spot problem on the most part of my screen, and thescreen doesnt have that little give it used to when using it (paranoia possibly)
So I can only assume something has given within the screen. Ive been searching all day on the internet for causes and fixes but nothing has come up.
The volume and power buttons work but I cant do anything at all with the phone as its obviously all touch based.
Is this a screen replacement job then or is the whole phone goosed?
Roheelshah if you turn your phone off do you have the massive oily screen thing?
Any help is most appreciated....
Click to expand...
Click to collapse
download and install this _HTC Touch HD_TouchHD system.exe
BOLDESH said:
download and install this _HTC Touch HD_TouchHD system.exe
Click to expand...
Click to collapse
whats it do? and where from??
I just posted something like this a few days ago, pulled my phone out and screen wouldnt respond, had these marks all over my screen, "swirly marks" as i describe it, very well could be the oily marks you are talking about. you can move them around with your finger right?
anyway, i took my sim out, tryna find a spare phone, couple hours later the marks were gone and screen started working again, touch wood its been fine since.
no idea what happened, but try letting it air out or something
ok basically i received a new digitizer today (the actual touchscreen) ...
i dismantled the whole phone using the service manual and some video some guy made (VERY HELPFUL, if anyone wants it for any reason i can post a link), ok so i got rid of all the top bits, the circuit boards (or watever theyre called)
I got down to just the bezel, lcd and digitizer (dont know what a bezel is, the lcd is where the display actually is and digitizer is directly stuck ontop of that)
Apparently when replacing the screen, htc have made it so that you have to replace all three of those parts instead of individual ones, but you can buy them seperately so i thought i'd hero it.
i poked out the screen from the frame (some chewingum like stuff holding it in) then i started peeling off the digitizer (if you get one and want to try it you'll know where to peel) ... this was a mistake tho cause the lcd is unbelievebly sensitive so while peeling off it left scratches on the lcd, and me not knowing the lcd is sticky tried to wipe them and use a dust free cloth, which left alot of crap on the actual lcd!
i managed to get the digitizer off and ripped the cable that goes from digitizer to whatever reads our fingers on the screen, took it all off, placed the new one directly ontop and fed the wire exactly how it was for the first screen.
Put it all together again
Now I did mess up my screen badly, but in a good way! .. i now have full touchscreen working (smoother than ever) but my LCD display is near enough gone, so it looks like the screens really really dark, and i have to tilt it at certain angles to see the screen..
After all of this i now have a touch hd i can controll from my pc (using mymobiler) so i can recieve calls, send texts all from my pc when connected thru active sync, can even play teeter ... but not really the same!
I wouldnt recomend anyone to try what i did, although i think its worth the risk as I would have to replace the lcd anyways if i wanted a new screen in the first place... and who knows you might be able to peel the digitizer off clean (NEVER EVER EVER TOUCH LCD WITH ANYTHING!!!).
It all cost me around 10-15£ for the digitizer and screwdrivers and alot of hours dismantling phone compared to 50-100£ for a new lcd.
I am either going to get a new lcd now so i can actually see the screen, or get a new phone.
Sorry for the essay but hopefully this helps someone in any similar situation
if i do get a new lcd will post how it goes and if it sorts out everything
if anyone knows of any other reasons why my lcd would be so dim (brightness is 100%) accept for me getting carried away with it ... help would be appreciated
the_cool said:
I just posted something like this a few days ago, pulled my phone out and screen wouldnt respond, had these marks all over my screen, "swirly marks" as i describe it, very well could be the oily marks you are talking about. you can move them around with your finger right?
anyway, i took my sim out, tryna find a spare phone, couple hours later the marks were gone and screen started working again, touch wood its been fine since.
no idea what happened, but try letting it air out or something
Click to expand...
Click to collapse
Yeah swirly oil marks is how myne started ... i think i finished off the screen by trying to press hard on the mark to try and clear it .. . so be careful with it.. but think that overall the screen had seen better days (course only a few weeks after warrenty finishes) ... all conections inside were ok aswell
doczyus said:
Dear All,
I have similar problem. Usuallí I use on my HD NRG ROM. About 3 weeks ago I updated to the latest NRG WM 6.5 23xxx ROM with Sense 2.5 Maxmanila version, and since this upgrade the touch screen position moving randomized up or down from 2 mm to 30mm!!! After this ROM I tryed updating each newer version, but not changed nothing. I need realign the screen about 10 times / day!!! The phone I never dropped or cracked.
Can help me somebody what happened with my HD?
Click to expand...
Click to collapse
Same here. Touch screen not working. Phone never flashed, droped,...
Any solution?
unfortunately, a friend of mine changed the touchscreen without success. Phone was in perfect state, no drop, no flash. Just the touch not responding. I'm not sure that changing whole part lcd+digitizer solve the problem.
Hi all!
I've got similar problem with my touch HD. It's stock since I bought it. My touch sense was acting weird, like it wasn't properly calibrated. Like, when I press 7 on phone pad, the phone actually presses 1, and if I press 0, phone presses 5 and so on..
I've tried to align the screen, but it doesn't get aligned the first time. I have to repeat the process about 4 times before it gets aligned. That's good for about few minutes and the problem is back. Hard reset was also done, 2 times.
Could this be a fixed with a software update? Does this mean that digitizer will soon be dead?
Thank you for your help
Regards
igothtc2 said:
Hi all!
I've got similar problem with my touch HD. It's stock since I bought it. My touch sense was acting weird, like it wasn't properly calibrated. Like, when I press 7 on phone pad, the phone actually presses 1, and if I press 0, phone presses 5 and so on..
I've tried to align the screen, but it doesn't get aligned the first time. I have to repeat the process about 4 times before it gets aligned. That's good for about few minutes and the problem is back. Hard reset was also done, 2 times.
Could this be a fixed with a software update? Does this mean that digitizer will soon be dead?
Thank you for your help
Regards
Click to expand...
Click to collapse
use ScreenCal to fix it, hopefully it can help you
Hakim Rahman said:
use ScreenCal to fix it, hopefully it can help you
Click to expand...
Click to collapse
Hi!
I've successfuly installed the cab file on my phone's sd card, but the problem is still there. I don't know where the installed files are, do I have to run this application?
Thank you for your help!
Regards
igothtc2 said:
Hi!
I've successfuly installed the cab file on my phone's sd card, but the problem is still there. I don't know where the installed files are, do I have to run this application?
Thank you for your help!
Regards
Click to expand...
Click to collapse
have you hard reset the device after installing the cab file ?? if not do it and see if there are changes...
Hakim Rahman said:
have you hard reset the device after installing the cab file ?? if not do it and see if there are changes...
Click to expand...
Click to collapse
Just did the hard reset. When it asked me to align the screen, I just couldn't align the top left corner. I had to press it like 50 times before cross went to the lower corner. Otherwise, after the align it's good for about couple of seconds and then it's just pressing all over.
I thought I had just some software issues because the screen wasn't dead, it responded to my touch. So, I'll probably have to buy a new screen and digitizer, right? Or do you have any other ideas?
Thank you again for your help!
Regards
firstly screencal installs calibration settings not for blackstone so do not install it, no point. (btw it also increases device touch sensitivity)
secondly you guys should try and install the calibration settings for blackstone, basicly what the align screen does, not sure where to find them for download but i could post the registrys if someone wants to make a .cab from them. (atm i cba making the .cab but i am able to do it )
if the calibration settings do not work i think it is best to buy a new lcd package (or buy new device and give me old one for spares oj)
Rn
hi buddy ! What you mean GSensorCalibrator ??
i didnt mention anything about gsensor calibration dude.
tried and tested screencal the other week and it screwed my blackstone.
install these instead:
*screen calibration, sets the blackstone touch points: (aligning the screen)
if you install a cab with these registrys it should fix the alignment problem.
(if it doesnt then its hardware issue = lcd etc)
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH]
"MaxCalError"=dword:8
"CalibrationData"="511,542 183,881 183,198 834,197 833,880"
*this one will maximise the touch sensitivity for those that want it:
[HKEY_LOCAL_MACHINE\Drivers\TouchPanel]
"PressureThreshold"=dword:0
Rn
Does anyone have a recommendation where you can buy a digitizer and lcd from?
Hi all dear members. Since the first day i bought this phone i've been seeing lots of screen issues about it but i never thought i would have one. It's proved me wrong.
So here's my problem, my device has developed halo all around it when the bg color gets grey. Most of the time , it's not obvious. I can live with that. Recently, my screen starts to show me some tv-like stripes every now and then, it doesn't last long. after one second or two, it disappera and then it'll show from time to time.
I'm afraid it's just the start. It's similar to most of the issue ppl claim as screen flikering or screen jittering or shaking screen, it's a bit different though.
Has anyone encountered the same issue. More importantly, has anyone found any solutions yet? I searched google and failed to find answers. And i looked into it on Baidu,a chinese search engine, where i found some answers that claims it's not the screen issue ,instead , it's just the ribbon cable is lose. And anyone who replace a new screen for that is stupid.I'm just not sure about this.
My phone was bought on the internet and shipped to China, thus, I don't have warranty to rely on. And my phone is only 10 months old. I never dropped it and i have kept it well.(LG logo on the rear back still falls off), I just don't get why LG made this so vulnerable.
Even though i have ordered the nexus 6, my g2 running CM12 is still crazily fast and I don't want to give up on it. I'm so happy about my d802 except for all issues about the screen.
Any help would be aprreciated. Thanks again. Hi all dear members. Since the first day i bought this phone i've been seeing lots of screen issues about it but i never thought i would have one. It's proved me wrong.
So here's my problem, my device has developed halo all around it when the bg color gets grey. Most of the time , it's not obvious. I can live with that. Recently, my screen starts to show me some tv-like stripes every now and then, it doesn't last long. after one second or two, it disappera and then it'll show from time to time.
I'm afraid it's just the start. It's similar to most of the issue ppl claim as screen flikering or screen jittering or shaking screen, it's a bit different though.
Has anyone encountered the same issue. More importantly, has anyone found any solutions yet? I searched google and failed to find answers. And i looked into it on Baidu,a chinese search engine, where i found some answers that claims it's not the screen issue ,instead , it's just the ribbon cable is lose. And anyone who replace a new screen for that is stupid.I'm just not sure about this.
My phone was bought on the internet and shipped to China, thus, I don't have warranty to rely on. And my phone is only 10 months old. I never dropped it and i have kept it well.(LG logo on the rear back still falls off), I just don't get why LG made this so vulnerable.
Even though i have ordered the nexus 6, my g2 running CM12 is still crazily fast and I don't want to give up on it. I'm so happy about my d802 except for all issues about the screen.
Any help would be aprreciated. Thanks again.
Hi, I also have a problem with the screen on my lg g2, appeared to me that the white line disappears and comes back, when I do print screen and transfer the image on the computer that line is not visible, and that line is not always the same intenziteta.Try to do print screen and set an image or we send the mail to compare the problem
i'm so pissed about the screen, yes, my gnex bought 3 years ago looks yellow and ****ty. but other than that, totally fine, but for g2, ive read so many complaints about it. Guess no one has figured it out. Maybe I will open my phone and try to figure out when the screen completely goes crazy. During I type, it has happed for 4 times . so very annoying.
Sent from my LG-D802 using XDA Free mobile app
I think you should try to put in some rom, I hope it's a software problem, I found the solution for my phone cloudy g3:good:
i flash different cm12 nightlies. i don't think its a software related issue. I'm not the only one with this issue. Yesterday I opened this phone ,well with my fingernails. And coz I didn't have the right screwdriver, I wasn't able to open that black cover at the button down bellow the battery, but I cleared the places around the USB port and there's a black tape glued near the camera , I pressed it and I put the phone together and guess what, the problem was gone for one day, and I will continue to keep an eye on it.
Sent from my LG-D802 using XDA Free mobile app