So I can call the last person (just hit phone * phone). On the default phone screen (with the keypad, speed dial, call history, etc), is it possibl e easily get to speed dial or something of the sort?
I can hit phone * right rocker (menu), then get to speed dial, but it takes a lot of taps. Why isn't the numberpad accessible with the 4-way? Argh.
tedder said:
So I can call the last person (just hit phone * phone). On the default phone screen (with the keypad, speed dial, call history, etc), is it possibl e easily get to speed dial or something of the sort?
I can hit phone * right rocker (menu), then get to speed dial, but it takes a lot of taps. Why isn't the numberpad accessible with the 4-way? Argh.
Click to expand...
Click to collapse
Option 1. Use Voice Speed Dial. Go to settings and set up your voice tags first. Then click the button on the left face at the top and speak the name. Phone dials! Only one click needed.
Option 2. Use Microsoft Voice Command. Don't have to tag first, will find anything in your contact list. Most of the time.
Option 3. Same as 1 or 2, but get a BT headset and click on its button instead of the phone button. Don't even have to touch the phone.
Option 4. Set up one-touch dialing. Go to contacts, press and hold a number, then do "Voice Dial" option. Assign to a digit 1-9. Then bring up the keypad and press and hold that same digit.
I've been complaining about this same UI gripe.
Wouldn't it be nice to hit call and go to the dial screen, and then use the up/down buttons to access the recent calls list like on a normal smartphone?
fuzzycuffs said:
I've been complaining about this same UI gripe.
Wouldn't it be nice to hit call and go to the dial screen, and then use the up/down buttons to access the recent calls list like on a normal smartphone?
Click to expand...
Click to collapse
Or like my old Nokia 6310: just browse through your contacts with the up/down button. You can do that, but you can hardly see anything from a bit further away (when the phone is in a holder on the dash in the car). It should be possible to configure a mode where you only see names and numbers in a big font when using the phone. I don't care about addresses and stuf when I'm calling. It's a wonderful machine, but the phone is only usable when standing still...
I just set up 9 speed dial numbers. I hit the phone key, than tap and hold on number 1-9 and the associated number is dialed. Only minus is that you have to remember which contact is under which number. Takes only two taps.
In contacts, you can choose menu-options and have the contacts list show only only the names instead of the numbers as well. By pressing the right of the D-pad you can choose which number must be the first in the list. Then hide the numbers and just press to call. I admit, the contacts are a bit small when you are in e.g. a car. I set up the most used number of each contact, only if I want to reach them on another number I have to go into the contact itself to select the right number.
Do I have to BUY Voice Dial Software?
I previously had the O2 XDAII that had Fonix Fone Dial included in the bundle. I've now bought the Orange SPVM1500 (Alpine) but no voice dial apps are included.
Anyone know where I can get a voice-dial application for free?
Cheers from a hopeful newbie to this site.
I, too, was finding it tedious to perform simple phone function like quick dial or dedial. After I installed MS Voice Command, this phone is 100% easier to dial. Just push the button on phone or bluetooth headset, say "call last" to redial, or "call mike smith at mobile". Works extremely well without any training needed.
You can also say stuff like:
What is my signal strength
what is my battery level
what calls have I missed
play media
open start word
etc
I am still learning all the commands, but so far it's being one of the best software for PPC.
I want to chime in to say MS Voice Command is the BEST! Push ONE button and say "Call Emily on mobile". It even works with your bluetooth headset button. It doesn't get any easier folks!
I want it for FREE.
Trouble is, I had the facility before (Fonix VoiceDial) and now I don't.
I, therefore, want some FREE voice dial software. Anyone got any ideas please?
Thanks.
Am I missing something here?
U just press the button above thered call button to go into your contacts and move to the one you want... then call...
If you want a call history on a click of a button why dont you try and replace contacts or calender with call history?
I use vijay's callhistory prog,
http://www.vijay555.com/index.php?Releases:VJPhoneShortcuts
and I have remapped the left soft key, and it's one click away
OK after much messing with BT stuff and how much hastle it is. Im looking at sticking with wired headset that comes with the XDA2i, is it possible to get the unit to open a voice dial program from pressing the green button on the headset lead?? i havent used any voice dial progs, i dont have time to be messing trying out loads of progs and resting the xda all the time. I just want to have a prog installed. Listen to my music and tomtom5, answer calls like I can currently but then with the press of the green button switch to the voice dial prog.. tell it who to call chat then press the red button to end the call and switch back to the music and tomtom5.
can it be done and if so i need idiot guide... im not a hacker/programmer, ive never used a reg edit, have not idea what an extended rom etc is.
Many thanks
Try smartskey that remap navigator buttons in phone app to contacts/call history/quick dial.
http://forum.xda-developers.com/showthread.php?t=256525
i'm trying to use the 99 speed dials... it gets easier to remember in time
Koksie said:
I just set up 9 speed dial numbers. I hit the phone key, than tap and hold on number 1-9 and the associated number is dialed. Only minus is that you have to remember which contact is under which number. Takes only two taps.
In contacts, you can choose menu-options and have the contacts list show only only the names instead of the numbers as well. By pressing the right of the D-pad you can choose which number must be the first in the list. Then hide the numbers and just press to call. I admit, the contacts are a bit small when you are in e.g. a car. I set up the most used number of each contact, only if I want to reach them on another number I have to go into the contact itself to select the right number.
Click to expand...
Click to collapse
Get smartskey. After pressing the the phone button (green call button), you can then just press up or down to get to your speed dial list or call history. This program has made my life with the Wizard a million times easier. Voice Dial and Voice Command are both good programs for touch free dialing as many others have suggested.
use smarstkey, vjphoneshortcuts. assign the left softkey to call history and the right to contacts. when you hold the down key in "contacts" for a while it starts to change the letters so you just press one of the soft keys a little of up and down and the green key
Good Evening guys,
Just a quicky
Firstly I have installed MS Voice command but how do I program in voice dials? I want to be able to use voice dialing while driving and I have programmed the button so I can dial using voice but can't find anywhere to actually program them in.
Secondly My handsfree for the car supports downloading the address book to it by object push. I have done it with other phones but I am guessing I can't do it with this one? Is that correct?
Thanks in advance,
Max
What handsfree kit are you using ?
r
Andrew
By default, MS Voice Command maps it to a long press of the Send key.
And not sure what you mean by "program in voice dials" as MS Voice Command doesn't need you to record you saying a person's name, it figures it out via speech to text.
I tried searching and havent found any threads about this.
On the stock 2.3 it has the microphone on the keyboard for voice to text.
I installed CM7 and while it says i have the option for voice to text, (voice to text settings) i cannot use the feature.
is there anyway to enable this???
do yu have voice search installed? Works for me and the voice search is a market app so it might not be included in the gapps
thanks man. appreciate it
That buggy pos called Voice Talk from gs2, now called S-Voice, is back to being a buggy pos on gs3.
It has a hard time doing the actual voice recognition. I actually had to rename a contact because it just can't match simple phonetic words with contact names.
Sometimes it fails to recognize and dial a bluetooth call, and then you have to reboot the phone. Sometimes it will stop listening half a seconds after starting to listen (with a bt car kit).
Your standard google Voice Dialer is much better. It doesn't require an internet connection either.
Could someone please make a flashable zip to replace s-voice with voice dialer.
EDIT: BTW, if you disable "double click home button to start s-voice" in s-voice settings, the home button lag magically disappears.
Is everybody else's bluetooth voice dialing just god awful?
S voice is crap, so it's frozen. Google's Bluetooth dialer is just the worst thing I've ever seen. Has anybody found out how to get Bluetooth dialing working properly?
Why in the world can't they just make Bluetooth launch voice search?
Sent from my SAMSUNG-SGH-I337 using xda premium
switters1 said:
Is everybody else's bluetooth voice dialing just god awful?
S voice is crap, so it's frozen. Google's Bluetooth dialer is just the worst thing I've ever seen. Has anybody found out how to get Bluetooth dialing working properly?
Why in the world can't they just make Bluetooth launch voice search?
Click to expand...
Click to collapse
Old thread, but I'll revive it because I want to talk about the same subject. I agree with the OP, and I'm surprised how badly Android/Samsung handles blutetooth voice dialing. (My last phone was an iPhone 3GS, and voice dialing worked great from day 1 back with iOS 3 or 4, whatever it originally came with.)
I frequently use bluetooth voice dialing in my car, either from a headset or speaker phone. This is a must-have feature for me.
Svoice is completely unacceptable because it requires the phone to be unlocked. If you have to mess with the phone to unlock it, then that defeats the purpose of voice dialing. I do understand that Svoice can do other things besides voice dialing, things which should be restricted by the lock screen. What I don't understand is why they don't give the users the options to enable selected features such as voice dialing while the phone is locked. But they don't, so Svoice had to go.
With Svoice uninstalled or disabled, Google Search takes over the voice dialing duties. It works ok, or at least it used to with Google Search v2.x. One thing about it that I don't like is that it wakes the phone (activates the screen) when you initiate voice dialing, so you can end up with accidental screen touches while voice dialing (if you don't have a pass code, or if it hasn't timed out yet). The screen should remain locked.
In recent versions of Google Search (starting in v3.x?), they decided to make voice dialing worse! If a person has multiple numbers, you can not directly select one, you have to wade through a stupid menu every time.
Say for example I have a contact named Tim Brown who has 3 numbers: home, work, mobile
With Google Search 2.x, you can do this:
Me: Call Jim Brown Home (or I can even just say "Call Jim Home" if I only have one Jim in my contacts)
Phone: Do you want to call Jim Brown at home? Say OK or Cancel.
Me: Ok
Phone: dials
With Google Search 3.x it ignores the location and always presents a menu:
Me: Call Jim Brown Home (the word "Home" is ignored)
Phone: Say Select 1 for Jim Brown Home, Say Select 2 for Jim Brown Work, Say Select 3 for Jim Brown Mobile, or say Cancel
Me: (If I can remember which freaking number was Home) Select 1
Phone: Do you want to call Jim Brown at home? Say OK or cancel
Me: (Yes I do, you stupid phone, I just told you so!) OK
Phone: dials
What a pain in the butt that is. Ironically, if you open Google Search by launching the app (i.e. by interacting with the screen), then it will listen to the "Home" part. It just ignores it if you are voice dialing, which is where you really need it. Does anybody from Google actually use this stuff?
My solution is this. Since my phone is rooted, I have the option of uninstalling Google Search v3.x, find v2.8 on the Internet, and install it on my phone. Then be sure to ignore any updates in the Play store. This works good enough. I can select a specific number when voice dialing, and I can voice dial while the phone is locked. It still turns on the phone screen when I voice dial, but I can live with that.
Note that I don't use Google Now, so I don't care about any new features that are included in the newer versions of Google Search. If you do use Google Now, this solution may not be acceptable to you.
If anyone else has a better solution, please share it.
Thanks
I tried using the Bluetooth Launch app to activate google voice search instead of the voice dialer, but that didn't work while the screen was locked. So for now, I'm sticking with the solution mentioned above (i.e. using google search v2.8).