Database Users

[Q] SGH-i377 stuck on Cyanogenmod logo

Hello,
first I'd like to say that since the first day, I really....hate my Galaxy S4, this is probably the phone I hate the most actually. This is why I wanted to get rid of this stupid stock ROM (who the hell wants all this preinstalled on his phone ?!)
I flashed it from the CWM Rom manger with Cyanogen Mod 10.1 and it's been stuck on the CM logo since 3 hours, I tried entering into recovery mode, but it boots on the stock recovery.
Please, help me..

You can fix this. You have to reflash stock firmware again since something clearly went wrong and you cant do anything.
1. Download Odin ( http://forum.xda-developers.com/showthread.php?t=2189539 )
2. Download the stock ROM image ( http://samsung-updates.com/device/?id=SGH-I337 ) Large File. Unzip the file to get the .tar.md5 file you will need.
3. Download and install Samsung Kies (Installs Drivers)
4. Boot the phone into "Download Mode" (From http://www.ninjaromeo.com/download-mode-samsung-galaxy-s4/ for i9500 but same procedure)
Unplug phone
Switch off your Samsung Galaxy S4 I9500 Android Smartphone.
Now press and hold “Volume Down + Power + Home” buttons together for a little bit of time.
After appearing Samsung logo release the buttons.
Then you will move on to Warning page.
Read the warning before going to proceed.
As the given on screen instruction, press Volume Up button to enter into download mode.
The you will see the page with Android logo and “Downloading, Do not turn off target!!”
If you don’t want to move on download mode, just press Volume Down button in the proceed page.
5. Plug Phone into PC. Open Odin. Select "PDA" and point it to the large firmware file that you downloaded that has a .tar.md5 extension.
6. Click "Start". This will reflash the stock recovery and firmware. It will retain your Data partition. Odin will inform you when it's done. Then close Odin.
You now have a functioning phone. Yay!
Backup everything you need to back up from your data partition to your PC or a microSD card.
If you want to Flash CM10.1
first run this,CASUAL http://forum.xda-developers.com/showthread.php?t=2297900
It will install TWRP Recovery. Just like CWM but touch. No difference to me has all same features. It installs easier so I used it. It will also root the device and perform the Loki trick to get it to boot and bypass the locked bootloader. RUN IT and follow the instructions laid on in that post word for word and you will get everything working.
So! Now you have a working recover! Yay!. Boot up into Android.
Download the latest CM10.1 Nightly from here. http://get.cm/?device=jflteatt&type=nightly
Download Latest Google Apps from here http://goo.im/gapps
Copy it to your phone. Preferably a mcroSD card.
Reboot to recovery. Go to Install. Select that CM10.1 file and install it.. (Choosing external SD card if you saved it to a microsd). Repeat for the Google Apps zip file.
When done, wipe Data, Cache, Dalverik Cache from the menu in recovery, sometimes under Advanced.
Reboot.
Working CM10.1.

WoodburyMan said:
You can fix this. You have to reflash stock firmware again since something clearly went wrong and you cant do anything.
1. Download Odin ( http://forum.xda-developers.com/showthread.php?t=2189539 )
2. Download the stock ROM image ( http://samsung-updates.com/device/?id=SGH-I337 ) Large File. Unzip the file to get the .tar.md5 file you will need.
3. Download and install Samsung Kies (Installs Drivers)
4. Boot the phone into "Download Mode" (From http://www.ninjaromeo.com/download-mode-samsung-galaxy-s4/ for i9500 but same procedure)
Unplug phone
Switch off your Samsung Galaxy S4 I9500 Android Smartphone.
Now press and hold “Volume Down + Power + Home” buttons together for a little bit of time.
After appearing Samsung logo release the buttons.
Then you will move on to Warning page.
Read the warning before going to proceed.
As the given on screen instruction, press Volume Up button to enter into download mode.
The you will see the page with Android logo and “Downloading, Do not turn off target!!”
If you don’t want to move on download mode, just press Volume Down button in the proceed page.
5. Plug Phone into PC. Open Odin. Select "PDA" and point it to the large firmware file that you downloaded that has a .tar.md5 extension.
6. Click "Start". This will reflash the stock recovery and firmware. It will retain your Data partition. Odin will inform you when it's done. Then close Odin.
You now have a functioning phone. Yay!
Backup everything you need to back up from your data partition to your PC or a microSD card.
If you want to Flash CM10.1
first run this,CASUAL http://forum.xda-developers.com/showthread.php?t=2297900
It will install TWRP Recovery. Just like CWM but touch. No difference to me has all same features. It installs easier so I used it. It will also root the device and perform the Loki trick to get it to boot and bypass the locked bootloader. RUN IT and follow the instructions laid on in that post word for word and you will get everything working.
So! Now you have a working recover! Yay!. Boot up into Android.
Download the latest CM10.1 Nightly from here. http://get.cm/?device=jflteatt&type=nightly
Download Latest Google Apps from here http://goo.im/gapps
Copy it to your phone. Preferably a mcroSD card.
Reboot to recovery. Go to Install. Select that CM10.1 file and install it.. (Choosing external SD card if you saved it to a microsd). Repeat for the Google Apps zip file.
When done, wipe Data, Cache, Dalverik Cache from the menu in recovery, sometimes under Advanced.
Reboot.
Working CM10.1.
Click to expand...
Click to collapse
Hello, I did everything except the CM10.1 part and succesfully managed to boot my phone onto stock rom, but can't even make it work. Just after booting, it's a completely black screen with the notification bar on top (can't reveal it)

Youssow said:
Hello, I did everything except the CM10.1 part and succesfully managed to boot my phone onto stock rom, but can't even make it work. Just after booting, it's a completely black screen with the notification bar on top (can't reveal it)
Click to expand...
Click to collapse
Try the emergency restore / recovery option in Kies. I have never done it but many people have had to after a bad flash. Not sure how you lost your custom recovery. I had issues with a rom I flashed and for stuck at boot but my recovery was fine so I restored my nandroid.

Try wiping your Data partition. Should fix that. Just hook the device up to a computer and copy your stuff off it first. Stock firmware was restored so any lingering problems would be related to stuff in the Data partition. Should be able to boot the stock recovery and do a factory reset which will also wipe the data partition.
As mentioned above you dont need the whole Kies suit. You can just install USB drivers. To make it simple as possible I stated using Kies but you can obtain the drivers elsewhere and install them rather than the whole Kies suit.

WoodburyMan said:
Try wiping your Data partition. Should fix that. Just hook the device up to a computer and copy your stuff off it first. Stock firmware was restored so any lingering problems would be related to stuff in the Data partition. Should be able to boot the stock recovery and do a factory reset which will also wipe the data partition.
As mentioned above you dont need the whole Kies suit. You can just install USB drivers. To make it simple as possible I stated using Kies but you can obtain the drivers elsewhere and install them rather than the whole Kies suit.
Click to expand...
Click to collapse
I can't even browse files from my computer, my phony is only detected by Odin ATM.
The stock recovery gives me two options: Quit, Download mode.....
God I'm so anxious right now

jperry73 said:
Flash back to stock with ODIN
Click to expand...
Click to collapse
This is what I did.
Stock ROM doesn't even work now, when I boot it for the first time it's a black screen with the notification bar on top and I can't get out and need to remove the battery.

OMFG
REMOVED SIM AND SD CARD AND THE PHONE BOOTED !
Thanks for the help guys, I'm very happy that my phone isn't dead ! (And I will never ever try to flash again a phone like the GS4)

Hi
I have an sgh-i377 (att usa), i installed a 4.3 rom using safestrap since i dont have cwm, now it's stuck in the samsung galaxy s4 logo, it wont boot, i tried to download the stock 4.3 from http://samsung-updates.com/device/?id=SGH-I337 but it doesnt list anything, can you please show me where I can download sgh-i377 stock 4.3 from?
I tried going into the android recovery and wiping all caches but nothing. your help is greatly appreciated.
Thanks,

portmap said:
Hi
I have an sgh-i377 (att usa), i installed a 4.3 rom using safestrap since i dont have cwm, now it's stuck in the samsung galaxy s4 logo, it wont boot, i tried to download the stock 4.3 from http://samsung-updates.com/device/?id=SGH-I337 but it doesnt list anything, can you please show me where I can download sgh-i377 stock 4.3 from?
I tried going into the android recovery and wiping all caches but nothing. your help is greatly appreciated.
Thanks,
Click to expand...
Click to collapse
Try flashing i337mk2stockboot.tar from my thread post#3 ... http://forum.xda-developers.com/showthread.php?t=2573080 see if that work. ..... Goodluck. ......
Swyped from MF3 Deadly Venom SS

ted77usa said:
Try flashing i337mk2stockboot.tar from my thread post#3 ... http://forum.xda-developers.com/showthread.php?t=2573080 see if that work. ..... Goodluck. ......
Swyped from MF3 Deadly Venom SS
Click to expand...
Click to collapse
I flashed the boot file you suggested and I see progress, now I have a "system software not authorized by AT&T has been found on your phone.." message..
what should I do next?

Revived it with http://forum.xda-developers.com/showthread.php?t=2502003 (MF3 TARs.tar)
Thanks for your help!

[Q] Booting Problem

Hey Guys,
i have a problem with flashing custom recovery on my I9505(jfltexx).
When i flash "DBT-I9505XXUBMEA-20130601103235" via Odin and in addition the "CF-Auto-Root-jflte-jfltexx-gti9505" my phone boots up, most of the time but not all the time. Now when i try to flash custom Recovery via Odin, my phone stucks at the Samsung Galaxy Logo and it wont continue. Even if i enter the standard recovery from Goomanager and i select "reboot system now" it stucks on the Logo!
Any Help?
Thanks in Advance

Faschoda said:
Hey Guys,
i have a problem with flashing custom recovery on my I9505(jfltexx).
When i flash "DBT-I9505XXUBMEA-20130601103235" via Odin and in addition the "CF-Auto-Root-jflte-jfltexx-gti9505" my phone boots up, most of the time but not all the time. Now when i try to flash custom Recovery via Odin, my phone stucks at the Samsung Galaxy Logo and it wont continue. Even if i enter the standard recovery from Goomanager and i select "reboot system now" it stucks on the Logo!
Any Help?
Thanks in Advance
Click to expand...
Click to collapse
U can try going to Stock or The recovery u installed which ever u are able to open
Just wipe cache & reboot
It should work well if this does not work
Flash a pre rooted firmware
http://forum.xda-developers.com/showthread.php?t=2255190&highlight=pre+rooted+i9505
And flash PHILZ recovery 100 % there wont be any problem and ya after flashing a firmware do Reset from the device and then flash recovery

123hiten said:
U can try going to Stock or The recovery u installed which ever u are able to open
Just wipe cache & reboot
It should work well if this does not work
Flash a pre rooted firmware
http://forum.xda-developers.com/showthread.php?t=2255190&highlight=pre+rooted+i9505
And flash PHILZ recovery 100 % there wont be any problem and ya after flashing a firmware do Reset from the device and then flash recovery
Click to expand...
Click to collapse
Yeah but thats the problem. I can't enter the recovery mode and when i try to flash a PRE-rooted rom from djembey my device stuck at the BootLogo.
In a nutshell: There is no option performing a wipe!

Faschoda said:
Yeah but thats the problem. I can't enter the recovery mode and when i try to flash a PRE-rooted rom from djembey my device stuck at the BootLogo.
In a nutshell: There is no option performing a wipe!
Click to expand...
Click to collapse
do not enter the recovery from and app
to enter a recovery power off device unplug it
press volume up + home + power all together till samsung logo appear and realease it
U will have a stock recovery or the one u installed
from there u will have factory reset and wipe cache bth option
let me know or some images u get would be more easy for us to help you with

123hiten said:
do not enter the recovery from and app
to enter a recovery power off device unplug it
press volume up + home + power all together till samsung logo appear and realease it
U will have a stock recovery or the one u installed
from there u will have factory reset and wipe cache bth option
let me know or some images u get would be more easy for us to help you with
Click to expand...
Click to collapse
Thanks for your effort. But i have to tell you the whole Story.
Yesterday i wanted to install the PA-Rom from verttigo. Before i was on the OMEGA 6.0 Version with Ktsoonez custom kernel. So i entered the recovery mode, did a backup, Full-Wipe, and then the huge MISTAKE, I formatted data and system and everything was gone. No Backup i could reinstall nor a ROM i could install. Than my phone rebooted and stucked at the samsung Logo. So i thought the F shall i do?!?!
I entered the download Mode and tried to install the prerooted Rom from djembey but i stucked also on the samsung logo. Since than im sitting in front of my Phone crying!

Faschoda said:
Thanks for your effort. But i have to tell you the whole Story.
Yesterday i wanted to install the PA-Rom from verttigo. Before i was on the OMEGA 6.0 Version with Ktsoonez custom kernel. So i entered the recovery mode, did a backup, Full-Wipe, and then the huge MISTAKE, I formatted data and system and everything was gone. No Backup i could reinstall nor a ROM i could install. Than my phone rebooted and stucked at the samsung Logo. So i thought the F shall i do?!?!
I entered the download Mode and tried to install the prerooted Rom from djembey but i stucked also on the samsung logo. Since than im sitting in front of my Phone crying!
Click to expand...
Click to collapse
Ok now i get it as per what i see i can still get your device back to normal but myte take multiple try rest assured it will work
1st flash a stock firmware again (not rooted pure stock) this time using pit file along with firmware
and while flashing the firmware using odin and pit do check re-partition also
Note with out pit file do not check the re-partition box
and once the flashing is done device should boot if its not booting
go to stock recovery like how i told u earlier and do factory reset and wipe cache
and reboot
and tell me the status.. all the best
http://forum.xda-developers.com/showthread.php?t=2265477&highlight=stock+firmware get pit file/ stock firmware from here for ur variant

123hiten said:
Ok now i get it as per what i see i can still get your device back to normal but myte take multiple try rest assured it will work
1st flash a stock firmware again (not rooted pure stock) this time using pit file along with firmware
and while flashing the firmware using odin and pit do check re-partition also
Note with out pit file do not check the re-partition box
and once the flashing is done device should boot if its not booting
go to stock recovery like how i told u earlier and do factory reset and wipe cache
and reboot
and tell me the status.. all the best
http://forum.xda-developers.com/showthread.php?t=2265477&highlight=stock+firmware get pit file/ stock firmware from here for ur variant
Click to expand...
Click to collapse
So let me get this clear. In Odin i should check the stock Rom in PIT instead of PDA? And check the Re-Partion box?

Faschoda said:
So let me get this clear. In Odin i should check the stock Rom in PIT instead of PDA? And check the Re-Partion box?
Click to expand...
Click to collapse
In Odin
PDA - u should select firmware stock one
PIT - select pit file
Re- partition should be check follow the image and flash
If Re-Partition is checked u must have pit file also do not forget that else u myte brick ur device

Faschoda said:
Thanks for your effort. But i have to tell you the whole Story.
Yesterday i wanted to install the PA-Rom from verttigo. Before i was on the OMEGA 6.0 Version with Ktsoonez custom kernel. So i entered the recovery mode, did a backup, Full-Wipe, and then the huge MISTAKE, I formatted data and system and everything was gone. No Backup i could reinstall nor a ROM i could install. Than my phone rebooted and stucked at the samsung Logo. So i thought the F shall i do?!?!
I entered the download Mode and tried to install the prerooted Rom from djembey but i stucked also on the samsung logo. Since than im sitting in front of my Phone crying!
Click to expand...
Click to collapse
Based on what you said, it seem like you still have all the partitions intact. Just that they are empty right now.
Did you do a full backup before all this problem happen? Or did you do a custom backup?
Are your backups stored in external memory and is a full backup? If so, try using custom recovery to restore your backup?

123hiten said:
In Odin
PDA - u should select firmware stock one
PIT - select pit file
Re- partition should be check follow the image and flash
If Re-Partition is checked u must have pit file also do not forget that else u myte brick ur device
Click to expand...
Click to collapse
lzk123 said:
Based on what you said, it seem like you still have all the partitions intact. Just that they are empty right now.
Did you do a full backup before all this problem happen? Or did you do a custom backup?
Are your backups stored in external memory and is a full backup? If so, try using custom recovery to restore your backup?
Click to expand...
Click to collapse
That's Bull****. Nothing worked -.-

Faschoda said:
That's Bull****. Nothing worked -.-
Click to expand...
Click to collapse
Chill. Your phone is definitely not bricked. I encountered your problem before when i was experimenting with something.
- Right now, boot to whatever recovery that you have. Try to wipe cache, dalvik, and any other partition if possible.
- After that, boot to download mode and try to flash STOCK rom using odin. Check that flash was success.
- Try to boot your phone and report here on what happens.
Edit: You might want to consider restarting your computer and changing usb port. "Faulty" Usb port will affect the flashing part.

lzk123 said:
Chill. Your phone is definitely not bricked. I encountered your problem before when i was experimenting with something.
- Right now, boot to whatever recovery that you have. Try to wipe cache, dalvik, and any other partition if possible.
- After that, boot to download mode and try to flash STOCK rom using odin. Check that flash was success.
- Try to boot your phone and report here on what happens.
Click to expand...
Click to collapse
Again thanks for your effort! Much appreciated!
HOOOOOOOOOOOOOOOOOOOOOOOOLLLYYY C*****************************************************!!!
That worked. It boots now!!!!!!

Faschoda said:
Again thanks for your effort! Much appreciated!
HOOOOOOOOOOOOOOOOOOOOOOOOLLLYYY C*****************************************************!!!
That worked. It boots now!!!!!!
Click to expand...
Click to collapse
Glad to hear that.
Remember to always make a nandroid backup! I recommend using Philz Touch Recovery

lzk123 said:
Glad to hear that.
Remember to always make a nandroid backup! I recommend using Philz Touch Recovery
Click to expand...
Click to collapse
How shall i install custom recovery? Via Odin or can i boot into stock recovery and apply update from there?

Faschoda said:
How shall i install custom recovery? Via Odin or can i boot into stock recovery and apply update from there?
Click to expand...
Click to collapse
Download the .tar file of the custom recovery. Flashed it through odin, at the PDA section.

Faschoda said:
That's Bull****. Nothing worked -.-
Click to expand...
Click to collapse
Behave your speech smart guy, they are trying to help!
general rule on how to fix a bootloop:
1- Wipe data and cache. If not,
2- Restore a nandroid backup if available. If not,
3- Flash stock firmware, If not,
4- Flash stock firmware with pit file (you can try pit file alone).

samersh72 said:
Behave your speech smart guy, they are trying to help!
general rule on how to fix a bootloop:
1- Wipe data and cache. If not,
2- Restore a nandroid backup if available. If not,
3- Flash stock firmware, If not,
4- Flash stock firmware with pit file (you can try pit file alone).
Click to expand...
Click to collapse
Soooorrry! Wasn't meant in an offensive Way!

Faschoda said:
Soooorrry! Wasn't meant in an offensive Way!
Click to expand...
Click to collapse
NVM, no problem

Glad that u got ur device back my friend i knew its just a matter of time b4 we give up
Here on instead of creating new thread please put it in Q&A thread u ll have many people giving u faster solutions the link is in my signature
All the Best :good:

[Q] Soft bricked Samsung Note 3 N9005

Hi,
I was recently given this samsung note 3 (32 gb) by a friend to fix it.
It was on running on O2 (UK) not sure of FW version, while doing an OTA battery died and the phone is stuck on the download screen.
I have been trying to resurrect it since last 5 days and no luck :crying:
I have gone through 5-6 different threads on XDA and tried out different options outlined there....Most of the time it failed (while installing CWM recovery using ODIN, installing superSU and running the boot loop fix.zip all failed ).
Current status:
I was able to get the O2 4.3 version installed on it (N9005XXUENB4_N9005O2UENB1_O2U) by using PIT file (from one of the thread) and selecting FW in AP of ODIN and selecting these options Re-partition, Nand Erase and Phone EFS Clear
Phone boots up, shows O2 logo and then SAMSUNG and then throws series of errors
1) Unfortunately, Samsung setupwizard has stopped, Press OK
2) Go to initial setup screen, selected English (United Kingdom) Press Next and it reboots
3) Sometimes it goes to next screen and starts wifi scanning and then freezes and reboots
I am totally lost, would really appreciate if you can help me revive this phone. I am okay installing custom ROM
(not worried about Knox, its already 0x1 after i tried CF-Auto-Root-hlte-hltexx-smn9005)
Please help.

idreamido said:
Hi ...
Click to expand...
Click to collapse
Go to Stock Recovery and wipe data/Factory reset. Select "Reboot system now" then.

Thanks Joku.
I tried it and as i said earlier, it boots up and then goes through 2-3 initial setup screens and freezes (pics attached)
Joku1981 said:
Go to Stock Recovery and wipe data/Factory reset. Select "Reboot system now" then.
Click to expand...
Click to collapse

idreamido said:
Thanks Joku.
I tried it and as i said earlier, it boots up and then goes through 2-3 initial setup screens and freezes (pics attached)
Click to expand...
Click to collapse
What happend to ur screen?
I have somewhere pit for our device for 4.4.2
I will give u the link to it with instruction tomorow
Will try save ur note

Thanks maqikpl, will wait for an update from you.
I got it with that lines on the screen, thats the second problem to tackle, hopefully this thread would fix it (http://forum.xda-developers.com/showthread.php?t=2290242) but first it should start booting
maqikpl said:
What happend to ur screen?
I have somewhere pit for our device for 4.4.2
I will give u the link to it with instruction tomorow
Will try save ur note
Click to expand...
Click to collapse

idreamido said:
Thanks maqikpl, will wait for an update from you.
I got it with that lines on the screen, thats the second problem to tackle, hopefully this thread would fix it (http://forum.xda-developers.com/showthread.php?t=2290242) but first it should start booting
Click to expand...
Click to collapse
Can you add the first screenshot of your stock recovery again but bigger and more resolution pls?

Please see attached the full size screenshot, this is the the recovery after installing CF-Auto-Root-hlte-hltexx-smn9005.tar.md5 using ODIN
Joku1981 said:
Can you add the first screenshot of your stock recovery again but bigger and more resolution pls?
Click to expand...
Click to collapse

idreamido said:
Please see attached the full size screenshot, this is the the recovery after installing CF-Auto-Root-hlte-hltexx-smn9005.tar.md5 using ODIN
Click to expand...
Click to collapse
You still having Lollipop Bootloader. What you have to do is:
1. Download the latest firmware for your device: HERE.
2. Flash it via ODIN like in the pic attached. I add the .PIT file too of your 32 GB device.
3. Take out the battery when the process finish (10 sec.). Put it in again.
4. Reboot in Stock Recovery and wipe data/Factory reset and wipe cache partition. "Reboot system now" then.

Thanks Joku for helping with the files. Followed all the steps and process completed successfully.
After recovery and wiping and rebooting the phone.....
phone reboots after one or sometimes 2nd second screen of initial setup (with those seemingly random "Unfortunately...." error messages)
Pics attached. Any ideas.
Joku1981 said:
You still having Lollipop Bootloader. What you have to do is:
1. Download the latest firmware for your device: HERE.
2. Flash it via ODIN like in the pic attached. I add the .PIT file too of your 32 GB device.
3. Take out the battery when the process finish (10 sec.). Put it in again.
4. Reboot in Stock Recovery and wipe data/Factory reset and wipe cache partition. "Reboot system now" then.
Click to expand...
Click to collapse

idreamido said:
Thanks Joku for helping with the files. Followed all the steps and process completed successfully.
After recovery and wiping and rebooting the phone.....
phone reboots after one or sometimes 2nd second screen of initial setup (with those seemingly random "Unfortunately...." error messages)
Pics attached. Any ideas.
Click to expand...
Click to collapse
1. Flash TWRP via ODIN -> HERE.
2. Boot in TWRP and Wipe System. Reboot in DOWNLOAD MODE.
3. Flash again the firmware GNG1 normally like in the pic attached.

TWRP installation successful....wiped cache and restarted in download mode and installed fw again.
Phone reboots and goes to setup screen but again goes through series of messages and then freezes.
please advice.
Joku1981 said:
1. Flash TWRP via ODIN -> HERE.
2. Boot in TWRP and Wipe System. Reboot in DOWNLOAD MODE.
3. Flash again the firmware GNG1 normally like in the pic attached.
Click to expand...
Click to collapse

idreamido said:
TWRP installation successful....wiped cache and restarted in download mode and installed fw again.
Phone reboots and goes to setup screen but again goes through series of messages and then freezes.
please advice.
Click to expand...
Click to collapse
I think you miss understood me. I will explain myself again:
1. First step is unnecessary coz you have installed TWRP. Follow next step then.
2. Boot in TWRP and select WIPE -> Advanced Wipe -> only mark SYSTEM-> Swipe to WIPE (like in the pic attached). Go BACK and BACK again and click REBOOT - DOWNLOAD.
3. Flash again via ODIN the firmware GNG1 normally like in the pic attached.

Thanks much for your patience.
Followed the instructions...installed twrp again as it was replaced with stock recovery when i had installed the fw in previous attempt.
Wiped system and reinstalled the fw, however end result is unchanged.
Phone started in the setup wizard and popped "Unfortunately, Google play newstand has stopped" and then froze on that screen.
tried rebooting after removing the battery and this time error message "Unfortunately, S Voice has stopped"

Hi Joku1981,
Any suggestions? i am still stuck at the initial setup screen and boot loop or freeze situation?
Would formatting the device help anyway? please help, am trying to get it to work since last 6-7 days with no solution in sight.
Advanced Thanks

idreamido said:
Hi Joku1981,
Any suggestions? i am still stuck at the initial setup screen and boot loop or freeze situation?
Would formatting the device help anyway? please help, am trying to get it to work since last 6-7 days with no solution in sight.
Advanced Thanks
Click to expand...
Click to collapse
The problem becomes here: I was able to get the O2 4.3 version installed on it (N9005XXUENB4_N9005O2UENB1_O2U) by using PIT file (from one of the thread) and selecting FW in AP of ODIN and selecting these options Re-partition, Nand Erase and Phone EFS Clear
---------- Post added at 21:50 ---------- Previous post was at 21:38 ----------
Joku1981 said:
The problem becomes here: I was able to get the O2 4.3 version installed on it (N9005XXUENB4_N9005O2UENB1_O2U) by using PIT file (from one of the thread) and selecting FW in AP of ODIN and selecting these options Re-partition, Nand Erase and Phone EFS Clear
Click to expand...
Click to collapse
* You can try go to TWRP and click Advanced -> Fix permissions. Reboot system then and see what happens. I'm out out ideas coz using Nand Erase your device becomes a paperweight. I'm sorry but I can't help you more. Good luck :fingers-crossed:

Joku1981 said:
The problem becomes here: I was able to get the O2 4.3 version installed on it (N9005XXUENB4_N9005O2UENB1_O2U) by using PIT file (from one of the thread) and selecting FW in AP of ODIN and selecting these options Re-partition, Nand Erase and Phone EFS Clear
---------- Post added at 21:50 ---------- Previous post was at 21:38 ----------
* You can try go to TWRP and click Advanced -> Fix permissions. Reboot system then and see what happens. I'm out out ideas coz using Nand Erase your device becomes a paperweight. I'm sorry but I can't help you more. Good luck :fingers-crossed:
Click to expand...
Click to collapse
Tried fix permission option and on reboot got these two messages and
Unfortunately, Internet has stopped
Unfortunately, Messages has stopped and phone froze on the initial setup screen.
With so many threads on xda on this topic, i thought it would not be this difficult to fix this phone :'(
I am so bummed

Blocked on TWRP presentation Page

Hi, I rently bought a Galaxy S7 Edge and i wanted to install the SUPERMAN custom ROM so :
I followed the tutorial to root the phone => ok
the tutorial to install TWRP => OK
Then the tutorial to install the ROM, and thats when the problems started to appear.
When I tried backing up before the installation in TWRP, I had a couple of error message like "unable to mount data". As the phone was new, I did not have any personnal data on it I thought "Backup is not necessary (grave error?)
so I skiped and went directly to ROM installation (the ROM was on an external microSD card) => installation OK
BUT I forgot to wipe Dalvik cache before rebooting, and as i understand it, it can cause a bootloop, it apparently did!
Here, as it was late, I started to lose my cool, so I am not entirely sure about the sequence of what I have done, but I am trying my best to be precise so that you can find a way to help me.
- I went back to TWRP, I tried to wipe dalvik cache and other types of wipe, but had the same error "unable to mount data" on every try.
-I googled a little bit and found a video tutorial ecplaining that I need to wipe => advanced wipe => tick system => change file system => then choose a type (i chose exFat) => It went on for 10-15 minutes without any sign of evolution so I reached the peak of my stupidity (really lost my cool), and forced reboot (not sure if I used volume UP or DOWN
-I dont think I did anything else after this, when I tried going into TWRP, I got stuck on the TWRP presentation page
The phone starts normally in download mode (am I saved?)
But it does not completely start in TWRP mode, it gets stuck on the presentation page (where there is the name of the team and the version number)
I tried installation other versions of TWRP with Odin but I still get stuck on the presentation page, although the version number changes adequatly to the version installed.
Please help me! :crying::crying::crying::crying::crying:
thank you.

Good news, is yes you can restore your device. Download your stock rom , unzip and flash in odin.
The is a dedicated thread on XDA for TWRP, in the steps the is a no-verity-opt-encrypt.zip which you should download.
Once you reach twrp again you should swipe to allow mod, then click on wipe, format data and type in yes when prompted.
After which flash the zip mentioned above. Now you will have access to the system in twrp, and flash whatever rom you like.
trust this helps

@soka said:
Good news, is yes you can restore your device. Download your stock rom , unzip and flash in odin.
The is a dedicated thread on XDA for TWRP, in the steps the is a no-verity-opt-encrypt.zip which you should download.
Once you reach twrp again you should swipe to allow mod, then click on wipe, format data and type in yes when prompted.
After which flash the zip mentioned above. Now you will have access to the system in twrp, and flash whatever rom you like.
trust this helps
Click to expand...
Click to collapse
thank you, I will try this later today and let you know how it goes!
thanks.

lass93 said:
thank you, I will try this later today and let you know how it goes!
thanks.
Click to expand...
Click to collapse
Best of luck buddy.

It worked thanks a lot man!
Now, onto the next step, I guess the tutorial I followed initialy was not good enought. So where can I get this "no-verity-opt-encrypt.zip", and how should I install it exactly? Unless I missed something, it is not explained in the xda tutorial
http://forum.xda-developers.com/s7-edge/development/rom-s7-edge-rom-v1-1-t3356699
Thank you all

Follow these instructions, the links for the latest recovery and the zip I mentioned are all there. If you need further help. I will help.
http://forum.xda-developers.com/s7-edge/development/recovery-official-twrp-hero2lte-3-0-0-0-t3334084
You do have a G935F right?

@soka said:
Follow these instructions, the links for the latest recovery and the zip I mentioned are all there. If you need further help. I will help.
http://forum.xda-developers.com/s7-edge/development/recovery-official-twrp-hero2lte-3-0-0-0-t3334084
You do have a G935F right?
Click to expand...
Click to collapse
Yes I do
Ok Thx. Will let you know!

lass93 said:
Yes I do
Ok Thx. Will let you know!
Click to expand...
Click to collapse
I Followed the instructions of your link, then I followed the instructions of the tutorial to install SuperMan ROM bug at the last reboot (after installation) I got stuck on the "Samsung Galaxy Edge 7" screen, the starting screen...
Hope I can install this ROM, I dont want to go back to stock.

Have you updated the modem and bootloader as dev instructed?
First initial boot will take time , remember you wiped everything but you Internal storage and SD card.
"9. Reboot and wait around 10 minute's (deodexed roms need longer to boot the first time)
10. Don't interrupt the process of booting the phone, even when it restarts"
How long did you leave it on the Samsung S7 Edge screen?

@soka said:
Have you updated the modem and bootloader as dev instructed?
First initial boot will take time , remember you wiped everything but you Internal storage and SD card.
"9. Reboot and wait around 10 minute's (deodexed roms need longer to boot the first time)
10. Don't interrupt the process of booting the phone, even when it restarts"
How long did you leave it on the Samsung S7 Edge screen?
Click to expand...
Click to collapse
Yes I followed the instructions and downloaded the too exact files he said, flashed it with odin
I wiped everything (even internal storage) but micro sd card
I left it more than 30 minutes.
One thing I did I'm not sure about, during root, I followed the tutorial (the link you gave me) to root and install twrp, during this step, I flashed both superSU and dm verity... step 11 ( http://forum.xda-developers.com/s7-edge/development/recovery-official-twrp-hero2lte-3-0-0-0-t3334084 ) Is that ok?

My method, that works for me is as follows :
Flash my stock firmware via odin.
Boot up, select OEM and USB debugging on.
Flash latest TWRP in odin.
Boot up phone, then switch off and enter recovery.
In recovery page i swipe to allow mod, select wipe /format data and type in yes when prompted.
Then , flash the no-verity zip.
I then boot up the phone normally and let it settle for about five min, switch off and get back into TWRP.
Now there shouldn't be any red error msg's in TWRP of cant mount. ( That is important ) otherwise rom wont flash properly.
After which i will flash a rom, most custom stock roms already have SU.

@soka said:
My method, that works for me is as follows :
Flash my stock firmware via odin.
Boot up, select OEM and USB debugging on.
Flash latest TWRP in odin.
Boot up phone, then switch off and enter recovery.
In recovery page i swipe to allow mod, select wipe /format data and type in yes when prompted.
Then , flash the no-verity zip.
I then boot up the phone normally and let it settle for about five min, switch off and get back into TWRP.
Now there shouldn't be any red error msg's in TWRP of cant mount. ( That is important ) otherwise rom wont flash properly.
After which i will flash a rom, most custom stock roms already have SU.
Click to expand...
Click to collapse
Exactly what I did except for the SU part that i mentionned. i asked on another Forum, they said there might be a problem with the zip I used. So i'm gonna try downloading a new zip for this ROM, but i can't find any alternative links...

I redownloaded the zip from the link in the tutorial, it worked!! thanks for your help!

SM-J510FN Dual Sim Stuck in TWRP recovery mode

Can anyone help, I rooted my phone last year and installed TWRP as part of the process, I did a backup at the time which I have on my SD card
the phone is stuck in the TWRP recovery mode, I can restore from my backup and it goes through fine but then goes back into recovery mode.
This all started when I tried to reset the phone back to factory defaults. I guess I wiped everything. Has anyone got any ideas how to get out of this.
I am not too familiar with TWRP, if anyone could point me in the right direction with a simple step by step guide it would be most appreciated.

RMEROY said:
Can anyone help, I rooted my phone last year and installed TWRP as part of the process, I did a backup at the time which I have on my SD card
the phone is stuck in the TWRP recovery mode, I can restore from my backup and it goes through fine but then goes back into recovery mode.
This all started when I tried to reset the phone back to factory defaults. I guess I wiped everything. Has anyone got any ideas how to get out of this.
I am not too familiar with TWRP, if anyone could point me in the right direction with a simple step by step guide it would be most appreciated.
Click to expand...
Click to collapse
Download a rom
Put it on your sd card
Put a sd card inside your phone
Then flash your rom

SM-J510FN
amirizad_7436 said:
Download a rom
Put it on your sd card
Put a sd card inside your phone
Then flash your rom
Click to expand...
Click to collapse
I did try that, I found a ROM j510fnxxs2aq14_j510fndbt2aq14_dbt.zip with size of 1,379,794Kb
when I tried to install it I get a failure could not find META-INF/com/google/android/update-binary in the zip file
Error installing zip file /external_sd/j510fnxxs2aq14_j510fndbt2aq14_dbt.zip
Which is why I asked for a bit more detailed advice on my problem. If you could point me in the direction of a suitable
ROM for my device which will work I would appreciate it.

RMEROY said:
I did try that, I found a ROM j510fnxxs2aq14_j510fndbt2aq14_dbt.zip with size of 1,379,794Kb
when I tried to install it I get a failure could not find META-INF/com/google/android/update-binary in the zip file
Error installing zip file /external_sd/j510fnxxs2aq14_j510fndbt2aq14_dbt.zip
Which is why I asked for a bit more detailed advice on my problem. If you could point me in the direction of a suitable
ROM for my device which will work I would appreciate it.
Click to expand...
Click to collapse
Was it stock rom??!!
You should install custom rom man first

amirizad_7436 said:
Was it stock rom??!!
You should install custom rom man first
Click to expand...
Click to collapse
I have tried several custom roms non of which work. What I don't understand is why when I restore from my one and only backup
it all goes through ok the size is 6036MB it reports restoring 7 partitions
then restoring boot then restoring data, at the end of it I get restore ok then it goes back to the TWRP recovery screen.

RMEROY said:
I have tried several custom roms non of which work. What I don't understand is why when I restore from my one and only backup
it all goes through ok the size is 6036MB it reports restoring 7 partitions
then restoring boot then restoring data, at the end of it I get restore ok then it goes back to the TWRP recovery screen.
Click to expand...
Click to collapse
Is your stock rom android 5 by any chance?

I don't know what my stock rom is, I can't access anything on my phone apart from the TWRP recovery screen
I do have another SM-J510FN which was bought at the same time which hasn't been rooted running Android 7.1.1
I don't know if that would help to determine what the stock rom is.

RMEROY said:
I don't know what my stock rom is, I can't access anything on my phone apart from the TWRP recovery screen
I do have another SM-J510FN which was bought at the same time which hasn't been rooted running Android 7.1.1
I don't know if that would help to determine what the stock rom is.
Click to expand...
Click to collapse
Sorry I misread the thread I thought it was 2015 model.
So what exactly did you do? Step by step.
Did you wipe anything in twrp?

RMEROY said:
I don't know what my stock rom is, I can't access anything on my phone apart from the TWRP recovery screen
I do have another SM-J510FN which was bought at the same time which hasn't been rooted running Android 7.1.1
I don't know if that would help to determine what the stock rom is.
Click to expand...
Click to collapse
I went into the TWRP recovery mode then to Wipe hoping to do a factory reset, that went through ok and came back into the TWRP recovery mode
I then tried Advanced wipe and ticked all the boxes except micro SD card. Nothing could get me out of the recovery mode so then I tried a restore from
an old backup and that seemed to go through ok, but it still came back to the recovery mode.

If it was me, I would remove the back cover and via TWRP menu turn off phone.
As soon as the screen goes black, remove battery.
Insert battery and power on and see what happens.
Have you tried that? Or how do you turn it off?

Tab_Triggerhappy said:
If it was me, I would remove the back cover and via TWRP menu turn off phone.
As soon as the screen goes black, remove battery.
Insert battery and power on and see what happens.
Have you tried that? Or how do you turn it off?
Click to expand...
Click to collapse
Many times

Okay... when screen goes black have you tried to quickly start pressing the key combination to enter download mode?
For my J500 it's Volume down + Home key + Power (keep pressing until download screen appears) should be same for J510.
If you can enter download you have the option to use Odin and flash either a stock ROM or a newer Recovery.
If you want, you could:
Advance wipe, everything except SD card and OTG Usb. (How much was backed up? Did you tick all boxes?)
Format Data
Restore backup from SD card again
Advance wipe, tick only 2 boxes, Dalvik + Cache
Restart
Report back
Oh, and just to clarify... when you manually go to Restart in TWRP, no matter what option you choose, the phone restarts into TWRP again?
Bare with me, I'm trying to understand and help.

Thats the problem, I can't get out of the TWRP recovery mode so am not able to use Odin, I presume when I did my original backup
I didn't tick all the boxes because it goes through a recovery with no problem I presume the boot sector is missing.
From the TWRP recovery mode I am able to go to install and select a previously downloaded file but then it fails.
I have searched for a suitable ROM to download but am struggling to find one for my phone

Ok, what TWRP version do you have?

Tab_Triggerhappy said:
Ok, what TWRP version do you have?
Click to expand...
Click to collapse
3.0.2-0

RMEROY said:
3.0.2-0
Click to expand...
Click to collapse
You can update your TWRP with a newer version from here:
https://twrp.me/samsung/j5xnlte.html
(Carefully check that I linked to your model!)
.img is what you want to put in your phone. BUT... I haven't done this myself, so it's your call.
In TWRP you choose to install img and locate the file on your SD card.
My thought is that your TWRP is too old for the ROMs you have tried... (anyone please correct me if I'm wrong).

RMEROY said:
Thats the problem, I can't get out of the TWRP recovery mode so am not able to use Odin, I presume when I did my original backup
I didn't tick all the boxes because it goes through a recovery with no problem I presume the boot sector is missing.
From the TWRP recovery mode I am able to go to install and select a previously downloaded file but then it fails.
I have searched for a suitable ROM to download but am struggling to find one for my phone
Click to expand...
Click to collapse
Man it's not a problem what custom rom you downloaded
Juat install it to system cames up then install stock rom via odin
Why you wasting your time??!!

I have the TWRP image file 3.4.0-0 which partition should I be flashing it to Boot or Recovery?
I would hate kill it after getting this far.
in reply to amirizad_7436 I don't understand, I can't install a stock rom via Odin as I can't get out of the TWRP recovery mode.

RMEROY said:
I have the TWRP image file 3.4.0-0 which partition should I be flashing it to Boot or Recovery?
I would hate kill it after getting this far.
in reply to amirizad_7436 I don't understand, I can't install a stock rom via Odin as I can't get out of the TWRP recovery mode.
Click to expand...
Click to collapse
You can. There is an option to reboot download mode from twrp (might be reboot bootloader)
That will put the device into download mode and you can flash with Odin.
Alternatively you could go to advanced wipe and wipe everything like you already did and then just flash a custom ROM. You wiped everything you said and then tried to reboot. That's why it went to twrp because you wiped system, there is no system to boot anymore.

garylawwd said:
You can. There is an option to reboot download mode from twrp (might be reboot bootloader)
That will put the device into download mode and you can flash with Odin.
Alternatively you could go to advanced wipe and wipe everything like you already did and then just flash a custom ROM. You wiped everything you said and then tried to reboot. That's why it went to twrp because you wiped system, there is no system to boot anymore.
Click to expand...
Click to collapse
Wow, that worked, I updated the version of TWRP and then installed a ROM that I downloaded "resurrectionremix-5.8.4-20190821"
and all seems to be working, both sims are recognised and operational all I need now is to get my head around the UI apart from that everything seems
good. Thank you everybody who helped me through this. I almost got to the point of binning an otherwise good phone.
Once again a big thankyou to everyone.