Hi everyone,
my N910F turned off yesterday and didn't turn back on. The only thing still working is the QDLoader via USB. Can I flash the firmware via QDLoader?
Android: 5.0.1
Region: DBT
Firmware: Stock (N910FXXU1BOC3)
~patti2
The handset should still be under Samsung warranty, just take it in to the Samsung store. . .
Yes why not give it a try or use odin and stock backup
Related
greetings
}i am form venezuela and recently i have purchased a galaxy spica which i want to update to 2.1, but i realised that the firmware doesn´t appear anywhere, and i can´t flash it, because i cannot find the drivers (but my computer detects the phone in modem and usb drivers)
what other firmware can i use to make the flash, that can be safe?
thx
This is how to ...........
kessdroid said:
greetings
}i am form venezuela and recently i have purchased a galaxy spica which i want to update to 2.1, but i realised that the firmware doesn´t appear anywhere, and i can´t flash it, because i cannot find the drivers (but my computer detects the phone in modem and usb drivers)
what other firmware can i use to make the flash, that can be safe?
thx
Click to expand...
Click to collapse
You need to install drivers.
Download ODIN.
A firmware to apply. (pass : samsung-firmwares.com) (select one package in ODIN)
Upload firmware by ODIN in download mode (Camera + Volume down + ON)
A patch to root your phone (Put in PDA in ODIN).
A mouth to enjoy.
Tutoriual
Hello , so i have GT-I9500 galaxy s4 phone, I did root this phone before and flashed it once with odin without having any problems , now i have an ECHOE rom with official android 4.4.2 installed , so the android lollipop came out and i wanted to flash my phone again with odin i installed all the required drivers thousand times so it's not a driver problem , when i got my phone into download mode odin \ kies wouldn't even recognize it , my pc won't even beeb or anything would pop up, my phone works great while it's on and odin recognize it (i can do the trans fare thing and open my phone's files on my pc) and when i go to device manager it shows me nothing about the phone no unknown devices either even though i unplug and plug my cable (while download mode ) the device manager won't refresh , I thought this problem is because the pc itself or the cable as your thinking right now BUT NO because i tried another galaxy s3 mini phone with the same cable and the same pc and guess what ? odin recognized it while on the download mode (it's stock though ) , i even tried it with different computers, cables , all usb ports and still doesn't work so the problem is in my phone and all of this happened after flashing my android and rooting it , i checked the hall internet for a fix someone on youtube said i should remove the battery , well i removed the battery while download mode , the pc catched it , installed some drivers and odin recognize it but when i try to flash the firmware (AP thing) it stops and says there is no partition , when re put my battery (while download mode) odin immediately say that the device is removed , even if the problem could be because the ROM i need odin to flash the stock firmware , my screen (while on the download mode) shows me that the current binary : custom , system status : custom , knock warranty void : 1 , AP SWREV : A3 ( Before and after the Unroot) So is there any way to fix my download mode (no data wiping preferred but no problem if i must wipe ) ? or even is there any way to flash my stock firmware without kies\ odin\ download mode ? (no data wipe preferred but it's ok ) so who's gonna help me please ? you would be my HERO :highfive:
Hi
Thanks for writing to us at XDA Assist. Please standby while we have your thread/question moved to the appropriate sub-forum for your device.
For future reference you can find your device sub-forum here (bookmark/subscribe this):
Samsung Galaxy S 4 i9500, i9505, i9505G, i9506
Within that section you will find a dedicated q&a sub-forum (this is where your thread is going to be moved to):
Galaxy S 4 Q&A, Help & Troubleshooting
Good luck!
ArefTh said:
Hello , so i have GT-I9500 galaxy s4 phone, I did root this phone before and flashed it once with odin without having any problems , now i have an ECHOE rom with official android 4.4.2 installed , so the android lollipop came out and i wanted to flash my phone again with odin i installed all the required drivers thousand times so it's not a driver problem , when i got my phone into download mode odin \ kies wouldn't even recognize it , my pc won't even beeb or anything would pop up, my phone works great while it's on and odin recognize it (i can do the trans fare thing and open my phone's files on my pc) and when i go to device manager it shows me nothing about the phone no unknown devices either even though i unplug and plug my cable (while download mode ) the device manager won't refresh , I thought this problem is because the pc itself or the cable as your thinking right now BUT NO because i tried another galaxy s3 mini phone with the same cable and the same pc and guess what ? odin recognized it while on the download mode (it's stock though ) , i even tried it with different computers, cables , all usb ports and still doesn't work so the problem is in my phone and all of this happened after flashing my android and rooting it , i checked the hall internet for a fix someone on youtube said i should remove the battery , well i removed the battery while download mode , the pc catched it , installed some drivers and odin recognize it but when i try to flash the firmware (AP thing) it stops and says there is no partition , when re put my battery (while download mode) odin immediately say that the device is removed , even if the problem could be because the ROM i need odin to flash the stock firmware , my screen (while on the download mode) shows me that the current binary : custom , system status : custom , knock warranty void : 1 , AP SWREV : A3 ( Before and after the Unroot) So is there any way to fix my download mode (no data wiping preferred but no problem if i must wipe ) ? or even is there any way to flash my stock firmware without kies\ odin\ download mode ? (no data wipe preferred but it's ok ) so who's gonna help me please ? you would be my HERO :highfive:
Click to expand...
Click to collapse
Hi mate
Odin troubleshooting: If Odin accidentally gives you "fail" try the following:
- Repeat procedure.
- Make sure that all actions of Kies are disabled from task manager.
- Change usb port.
- Try another usb cable (make sure it is the original).
- Try another Odin version.
- Uninstall and re-install driver.
- Use pit file.
- Try another computer.
check and read here
http://forum.xda-developers.com/showthread.php?t=2265477
Thx max 404 for your reply but I tried everything you said as I said in my Thread
Sent from my GT-I9500 using XDA Free mobile app
Hi
I have this Samsung Galaxy Note 4 (SM N910F). I am here in Pakistan. I purchased my Note 4 from UK and Its on EE. I was using it here and it got an Official OTA Update of Marshmallow which I installed. After a couple of days, my phone automatically got bricked. I contacted a local mobile repairing shop who dumped some other unbranded international firmware which changed its CSC too [CSC after updating unbranded firmware = (N910FOXX1COH1)]. The firmware was not working properly and had glitches.
Now i want to flash its stock EE Firmware which i have downloaded. I tried to flash it with ODIN but then i noticed that the CSC was changed so i tried to change the CSC by rooting the phone and for that i reboot the phone in Download Mode. The phone usually goes to black screen and does not start after proper power off and I need to soft reset it (By pulling the battery and draining battery charges) in order to turn it on everytime. After a couple of restarts in this way, the phone finally stopped to turn on. In download mode i had an error of "PIT File not found" while i tried to root it through ODIN. I tried to normal boot the phone but now it doesnt boot at all.
I need to boot it so that i may change my CSC to flash my stock firmware (please tell me if changing CSC would be necessary, Current CSC = N910FOXX1COH1,
Required CSC = N910FEVR1DPE1)
Any help would be appreciated. Thanks
Try to flash your EE rom with pit file for note 4 910f.
http://forum.xda-developers.com/not...te-4-pit-files-repartiton-f-g-c-t-w8-t3282641
Chamaka said:
Try to flash your EE rom with pit file for note 4 910f.
http://forum.xda-developers.com/not...te-4-pit-files-repartiton-f-g-c-t-w8-t3282641
Click to expand...
Click to collapse
Thanks for the reply !
Is it necessary to change the csc to UK region before flashing the UK firmware ? My phone is not booting to download mode either right now. Earlier today it was booting infact i tried to exit from download mode 2 times by pulling the battery but every time it automatically reboot to download mode. That was the moment when i shut down the phone by pressing home + power and after that it doesnt turn on
UK firmware includes UK csc. Then you don't need to change it manually.
But if your phone won't turn on I don't know how to recover it. (try to Recharge your phone and then go to download mode. I think your battery is fully discharged. )
If you can able to access download mode, flash firmware with the pit file using Odin.
Chamaka said:
UK firmware includes UK csc. Then you don't need to change it manually.
But if your phone won't turn on I don't know how to recover it. (try to Recharge your phone and then go to download mode. I think your battery is fully discharged. )
If you can able to access download mode, flash firmware with the pit file using Odin.
Click to expand...
Click to collapse
Thanks for the reply. I am trying to arrange another note 4 through which i can charge the battery. Ill give this idea a try and will let you know ! Thanks
I charged the battery but still the phone wont turn on
I think i have fried the boot loader !
Ma note 4 wont turning on and showing connect hs usb qdloader 9008 no flahing not charging want help please help
I have an S7 edge running the latest BTU firmware DQG1.
I have tried to flash it via Odin to EVR which failed. The phone is stuck on an error has occurred while updating the device.
It is not detectable via Samsung Smart.
I have tried to reflash it with DQG1 and it starts and then half way through fails.
Have I killed it? Please help I've only had it a week.
Here is what you can do, if it fails, then yes you have bricked your device... If not, hurray!
1. Charge your phone to 80%
2. Put your phone in download mode.
3. Uninstall, redownload and reinstall the driver for your phone. You can use the device manager in Windows for this.
4. Get the stock firmware with BTU CSC which is the default.
5. Use a new USB cable to connect the phone to the PC, this will eliminate the error IF its cable related.
6. Flash the new software
7. Pray
8. If all goes well, you'll have a working phone....
I tried again last night with a different USB cable and the latest BTU and it is now back up and running.
Next question is how do I get it on EVR firmware ?
Hello guys,
just received S7 (G930V) and I need to fix it. previous owner tried to flash exynos? rom onto it so now im stuck here (see image) I can¨t use ODIN, because it didnt recognize this device, (but Korean 930s does) and even it restarting automatically every few seconds and its shows "This is old binary, please update latest binary! (boot.img)"
Can you help me with this please?
SkopiX said:
Hello guys,
just received S7 (G930V) and I need to fix it. previous owner tried to flash exynos? rom onto it so now im stuck here (see image) I can¨t use ODIN, because it didnt recognize this device, (but Korean 930s does) and even it restarting automatically every few seconds and its shows "This is old binary, please update latest binary! (boot.img)"
Can you help me with this please?
Click to expand...
Click to collapse
Install all needed drivers, and dowload latest firmware here's link (you can try to flash universal snapdragon firmware):
Download Samsung Galaxy S7 SM-G930U USC USA (US Cellular) G930UUES8CRK1 firmware
Fast download latest Samsung Galaxy S7 firmware SM-G930U from USA (US Cellular) with G930UUES8CRK1 and Android version 8.0.0
www.sammobile.com
Thank you for your reply, but I cant flash new fw because my PC dont see phone and phone itself cant go to .proper download mode, only to this fail screen. I have drivers installed and PC and odin sees other galaxy s7 so its probably not driver issue..
SkopiX said:
Thank you for your reply, but I cant flash new fw because my PC dont see phone and phone itself cant go to .proper download mode, only to this fail screen. I have drivers installed and PC and odin sees other galaxy s7 so its probably not driver issue..
Click to expand...
Click to collapse
What is your Odin version???
Try this one:
Odin3 v3.12 (PrinceComsy).zip | Tool by psouza4 for Galaxy S7
PrinceComsy's Odin3 v3.12 hash skip version.
androidfilehost.com
I tried this one, but still, if I cant go to download mode, how can odin flash anything? So still no succes
SkopiX said:
I tried this one, but still, if I cant go to download mode, how can odin flash anything? So still no succes
Click to expand...
Click to collapse
If you press power more than 10 sec. and press vol- + home it drops you back to this mode???
yes, EVERY action ends on this screen if I hold power more than 1 sec +-, it just restarting and restarting...
Hey guys, just a fast info:
I bought this special cable from aliexpress
https://www.aliexpress.com/item/32966775653.html?spm=a2g0s.9042311.0.0.32dd4c4dxNJCmM
thanks to this I could boot into DL mode (which I couldnt before) and I flashed newest USA FW with odin
So now, its working!