Database Users

help please

tried to reset my build.prop by formatting the sytem, data, and cache in cwm, went to restart stuck on blck screen/. on us cellular sch r970 ...every stock firmware ive tried (hotfile) takes like 2 hours to download i have to be deployed back tomorrow and could really use some help. thanky ou

freshkid87 said:
tried to reset my build.prop by formatting the sytem, data, and cache in cwm, went to restart stuck on blck screen/. on us cellular sch r970 ...every stock firmware ive tried (hotfile) takes like 2 hours to download i have to be deployed back tomorrow and could really use some help. thanky ou
Click to expand...
Click to collapse
U have formatted the system that means u will now not have any OS u must flash stock firmware
http://samsung-updates.com/device/?id=SCH-R970
Try the above link also for firmware

there's 2, which one do i need?

Device Name
Model
Region
Version
OS
OS Version
Build Date
Changelist
Unlock
Galaxy S 4 (U.S Cellular) SCH-R970 USC R970VXUAMF5 Android 4.2.2 19.06.2013 912339 Unlock Download File
Galaxy S 4 (U.S Cellular) SCH-R970 USC R970VXUAMDL Android 4.2.2 26.04.2013 440248 Unlock Download File

freshkid87 said:
Device Name
Model
Region
Version
OS
OS Version
Build Date
Changelist
Unlock
Galaxy S 4 (U.S Cellular) SCH-R970 USC R970VXUAMF5 Android 4.2.2 19.06.2013 912339 Unlock Download File
Galaxy S 4 (U.S Cellular) SCH-R970 USC R970VXUAMDL Android 4.2.2 26.04.2013 440248 Unlock Download File
Click to expand...
Click to collapse
Take the latest one only that's best with higher change list dated 19/06/2013

123hiten said:
Take the latest one only that's best with higher change list dated 19/06/2013
Click to expand...
Click to collapse
Wait, if you where on mdl before take that. Mf5 is going to put knox on and will limit what you can do with the phone.

Device Name
Model
Region
Version
OS
OS Version
Build Date
Changelist
Unlock
Galaxy S 4 (U.S Cellular) SCH-R970 USC R970VXUAMF5 Android 4.2.2 19.06.2013 912339 Unlock Download File
Galaxy S 4 (U.S Cellular) SCH-R970 USC R970VXUAMDL Android 4.2.2 26.04.2013 440248 Unlock Download File
gonna take 3 hours to download a 1gig file..fml

They usually go faster than they say. Good luck!

http://server10.stockroms.net/download/GalaxyS4/SCH-R970/R970VXUAMDL_R970USCAMDL_USC.zip i downloaded that one, is that ok

Do you know if you're on mdl firmware if you are it'll work. If you were on mf5 it won't work, but it also won't hurt anything. The file is a zip file. Use 7-zip to extract the .tar.md5 file from it. That's the file you'll use in Odin.

jd1639 said:
Do you know if you're on mdl firmware if you are it'll work. If you were on mf5 it won't work, but it also won't hurt anything. The file is a zip file. Use 7-zip to extract the .tar.md5 file from it. That's the file you'll use in Odin.
Click to expand...
Click to collapse
i don't remember lol

freshkid87 said:
i don't remember lol
Click to expand...
Click to collapse
Have you taken any ota updates? Where you flashing any custom roms and have a custom recovery on your phone? As I said, mdl won't hurt it just won't work. I'd try that first as mf5 has additional security which makes it more difficult to flash custom roms.

yeah i flashed a few custom roms, i tried changing the build.prop earlier this AM to help fix the no sim notificiation then it wouldnt allow me to make calls saying i must first dial the 10 digit number etc...so i edited build.prop and ****ed up my calling. so now i gotta start from stock, re flash and everything else

freshkid87 said:
yeah i flashed a few custom roms, i tried changing the build.prop earlier this AM to help fix the no sim notificiation then it wouldnt allow me to make calls saying i must first dial the 10 digit number etc...so i edited build.prop and ****ed up my calling. so now i gotta start from stock, re flash and everything else
Click to expand...
Click to collapse
When you get it back up and running make a nandroid backup in your custom recovery. That way if you f up you can easily restore it and not go back thru flashing back to stock.

jd1639 said:
When you get it back up and running make a nandroid backup in your custom recovery. That way if you f up you can easily restore it and not go back thru flashing back to stock.
Click to expand...
Click to collapse
ok cool, sounds good man do u got a IM i can reach u at?

freshkid87 said:
ok cool, sounds good man do u got a IM i can reach u at?
Click to expand...
Click to collapse
You can pm me on xda and I'll keep an eye on this if you run into trouble. Have you used odin before?

jd1639 said:
You can pm me on xda and I'll keep an eye on this if you run into trouble. Have you used odin before?
Click to expand...
Click to collapse
no man i haven't 3 minutes until the download is done

freshkid87 said:
no man i haven't 3 minutes until the download is done
Click to expand...
Click to collapse
im on odin 3.09
do i load the file using AP

<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> R970VXUAMDL_R970USCAMDL_R970VXUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> R970VXUAMDL_R970USCAMDL_R970VXUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

[Q] SM-N9005 failing on ODIN Flash - Trying restore stock firmware

Hey everyone - long time reader first time poster.
I'm having an issue with my SM-N9005. I had rooted it, and was running OmegaRom V21 (i think). I am now trying to flash it back to stock 4.4.2 XSA firmware and am receiving a FAIL! message in Odin 3.07 after HIDDEN is displayed.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENE3_N9005XSAENE1_N9005XXUENE3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> aboot.mbn
<ID:0/006> NAND Write Start!!
<ID:0/006> sbl1.mbn
<ID:0/006> rpm.mbn
<ID:0/006> tz.mbn
<ID:0/006> sdi.mbn
<ID:0/006> NON-HLOS.bin
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img.ext4
<ID:0/006> modem.bin
<ID:0/006> cache.img.ext4
<ID:0/006> hidden.img.ext4
<ID:0/006> FAIL! (Size)
<OSM> All threads completed. (succeed 0 / failed 1)
I have been able to successfully flash to the leaked Polish 4.4.2 firmware using ODIN 3.09 and extracted .pit file, but when i try and then reflash the STOCK XSA firmware it is showing FAILED! again...
Any suggestions?
Cheers
James

is the omega rom 4.4.4 or is it 4.4.2

Powerplayer1025 said:
is the omega rom 4.4.4 or is it 4.4.2
Click to expand...
Click to collapse
It was 4.4.2

hmm you might have a bad chord or you might need to run odin as admin or you might have a bad download
---------- Post added at 08:11 AM ---------- Previous post was at 08:09 AM ----------
did you try to turn your phone all the way off leave the phone off for 15 seconds then boot into download mode and flash it. or are you putting the file in the wrong spot

Powerplayer1025 said:
hmm you might have a bad chord or you might need to run odin as admin or you might have a bad download
Click to expand...
Click to collapse
i have tried all those things. i'm able to flash with the leaked Polish 4.4.2 firmware.. and have downloaded the firmware a few times, from SamMobile and other mirrors. The leaked Polish firmware is the only way i can get into the phone, otherwise it displays emergency firmware recovery messages, but isn't detected in Kies...
I'm really confused actually lol

try a different odin maybe sometimes that seems to help the problem. maybe even reboot the laptop

iamjamoo said:
Hey everyone - long time reader first time poster.
I'm having an issue with my SM-N9005. I had rooted it, and was running OmegaRom V21 (i think). I am now trying to flash it back to stock 4.4.2 XSA firmware and am receiving a FAIL! message in Odin 3.07 after HIDDEN is displayed.
...
I have been able to successfully flash to the leaked Polish 4.4.2 firmware using ODIN 3.09 and extracted .pit file, but when i try and then reflash the STOCK XSA firmware it is showing FAILED! again...
Any suggestions?
Cheers
James
Click to expand...
Click to collapse
I have a feeling your partitioning scheme is indeed different - what specific model was the N9005 originally? You might need to first install the oldest 4.4.2 you find for that original model.

xclub_101 said:
I have a feeling your partitioning scheme is indeed different - what specific model was the N9005 originally? You might need to first install the oldest 4.4.2 you find for that original model.
Click to expand...
Click to collapse
hmm it was an Australian model, i thought it would be an issue with partitioning so i tried to use the pit file from the polish firmware and flash the xsa firmware but that also failed..
so the oldest 4.4.2 you think? I'll give that a go

[HOW TO] Fix (system rev. check fail device: 2 binary 1) In 5.1.1 G920F

How to fix system rev. check fail device: 2 binary 1 error when flashing a custom 5.1.1 ROM
If this error has appeared after flashing the new Bootloader and Modem for BOFJ
Download this: https://mega.co.nz/#!E05hTYaS!_vad3fvvKCwWiMmgWGrGgc69KYdgYRa1wFCmxYzwH3s
(Stock 5.1.1)
Once installed and passed with ODIN (Flash as AP)
Power off the phone and boot into download mode
Once in download mode flash the latest TWRP 2.8.7.1
http://forum.xda-developers.com/showpost.php?p=61548356&postcount=570
After flashed you'll be able to boot into recovery and flash your custom ROM ​

Thanks
Just fixed my baby s6

I get error..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Reflash with stock 5.1.1 via odin.
ROMs for G920F:
http://www.sammobile.com/firmwares/database/SM-G920F/

Is there a 920T version of this?

Here you go:
http://www.sammobile.com/firmwares/database/SM-G920T/

G920I version?
Is there a 920I version as well?
Found it.
http://www.sammobile.com/firmwares/database/SM-G920I/

Criticalstriker said:
I get error..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
>>>>>>>>>>>>>First of all thank you very much to the OP!! <<<<<<<<<<<<<<<
I got the same error and solved it.
I think the reason was that I tried flashing a 502 stock when I had already flashed the 511 bootloader and modem. In my case I have a Brazilian SM-G920I GS6 and the 511 stock rom is/was not readily available for it. So I tried downloading the latest available official stock version (502) and it resulted in the error you mentioned.
So I dowloaded the India 511 version (region INU) for 920I and it finally worked.
I used samfirm to download it (http://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647).
You need to input the exact model name (for me it was literally SM-G920I) and the region code for your phone. Then download it, DON'T close samfirm software, then click on Decrypt and you will finally have a ZIP from which you can extract the stock rom. And to find out your region code, you can go to www.sammobile.com and click on Firmware in the main menu at the top. Then you enter the model number and after that you will get to a screen with a dropdown menu for all available regions and their codes (for instance, region codes for Brazil are ZTO, ZTA..).
You can also download the stock roms from sammobile diretcly but it is too slow (takes a day or so).
Good luck!
:fingers-crossed:

gamekill said:
>>>>>>>>>>>>>First of all thank you very much to the OP!! <<<<<<<<<<<<<<<
I got the same error and solved it.
I think the reason was that I tried flashing a 502 stock when I had already flashed the 511 bootloader and modem. In my case I have a Brazilian SM-G920I GS6 and the 511 stock rom is/was not readily available for it. So I tried downloading the latest available official stock version (502) and it resulted in the error you mentioned.
So I dowloaded the India 511 version (region INU) for 920I and it finally worked.
I used samfirm to download it (http://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647).
You need to input the exact model name (for me it was literally SM-G920I) and the region code for your phone. Then download it, DON'T close samfirm software, then click on Decrypt and you will finally have a ZIP from which you can extract the stock rom. And to find out your region code, you can go to www.sammobile.com and click on Firmware in the main menu at the top. Then you enter the model number and after that you will get to a screen with a dropdown menu for all available regions and their codes (for instance, region codes for Brazil are ZTO, ZTA..).
You can also download the stock roms from sammobile diretcly but it is too slow (takes a day or so).
Good luck!
:fingers-crossed:
Click to expand...
Click to collapse
Ok, now I'm stuck.
I've downloaded the same version as you (INU 5.1.1 for G920I) and flashed. Used for some days and now I have to take my SGS6 to service to check if they can give me a new one because I´m having some trouble with the radio of my network (the problm was before flashing any ROM). Any way, I've tried to flash stock 5.0.2 and Odin still giving the same error. In my case I tried many of 5.0.2 stocks ROMs for the G920I and none of them worked, even the stock from Claro (my carrier) doesn't work.
This is the log in Odin, after reflashing INU 5.1.1, wiping and apply download mode.
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920IDVU1AOD1_G920IUWA1AOD6_G920IDVU1AOD1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Added!!
<ID:0/008> Odin engine v(ID:3.1005)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> FAIL!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Don't know what to do. I can't downgrade

andifds said:
Ok, now I'm stuck.
I've downloaded the same version as you (INU 5.1.1 for G920I) and flashed. Used for some days and now I have to take my SGS6 to service to check if they can give me a new one because I´m having some trouble with the radio of my network (the problm was before flashing any ROM). Any way, I've tried to flash stock 5.0.2 and Odin still giving the same error. In my case I tried many of 5.0.2 stocks ROMs for the G920I and none of them worked, even the stock from Claro (my carrier) doesn't work.
This is the log in Odin, after reflashing INU 5.1.1, wiping and apply download mode.
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G920IDVU1AOD1_G920IUWA1AOD6_G920IDVU1AOD1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Added!!
<ID:0/008> Odin engine v(ID:3.1005)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> sboot.bin
<ID:0/008> NAND Write Start!!
<ID:0/008> FAIL!
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Don't know what to do. I can't downgrade
Click to expand...
Click to collapse
It's not possible to downgrade to 5.0.1 if your bootloader is on 5.1.1.

Downloading now. So like all the other Odin roms it passed but does it pass in download mode on the phone that then blocks the download ?

hello!
This works on any 5.1.1?
i mean can i download any 5.1.1. for 920F and it will be fixed or i have to use exactly the rom that is posted on OP?

Once in download mode flash the latest TWRP 2.8.7.1
[url said:
http://forum.xda-developers.com/showpost.php?p=61548356&postcount=570[/url]
After flashed you'll be able to boot into recovery and flash your custom ROM [/COLOR][/SIZE]
[/CENTER]
Click to expand...
Click to collapse
hi! can someone help me to flash this recovery.img ?
thanxx in advance.

Thank you so much for this topic, Rossyyy! :good::good::good::good::good::good::good:!!!!!!!!!
Edit; The only thing is that i still get a message (top left) in really small red letters every time i boot. For a few seconds and than boot proceeds by itself....

Rossyyy said:
How to fix system rev. check fail device: 2 binary 1 error when flashing a custom 5.1.1 ROM
If this error has appeared after flashing the new Bootloader and Modem for BOFJ
Download this: https://mega.co.nz/#!E05hTYaS!_vad3fvvKCwWiMmgWGrGgc69KYdgYRa1wFCmxYzwH3s
(Stock 5.1.1)
Once installed and passed with ODIN (Flash as AP)
Power off the phone and boot into download mode
Once in download mode flash the latest TWRP 2.8.7.1
http://forum.xda-developers.com/showpost.php?p=61548356&postcount=570
After flashed you'll be able to boot into recovery and flash your custom ROM ​
Click to expand...
Click to collapse
Hey, once I am facing the "system rev. check fail device: 2 binary 1 error", I don't think I can power off the phone completely. I can just reboot the phone into the download mode. If I try to reboot into recovery it will say "recovery is not seandroid enforcing"...
How do I power off the phone completely or how do I reboot into recovery?

aeroxy said:
How do I power off the phone completely or how do I reboot into recovery?
Click to expand...
Click to collapse
Volume up, home and power button.

richajax said:
Volume up, home and power button.
Click to expand...
Click to collapse
Oh yes, I have tried this. It will reboot and says "recovery is not seandroid enforcing"...

I think you will find your answer in one of these topics?
http://forum.xda-developers.com/search.php?searchid=379334690

Thanks, fixed the soft brick on my 920i. Used the Indian 5.1.1 version but it takes an age to download. Here is an alternate link.
https://mega.co.nz/#!VZcARCrC!-Zj8gwLGkqmlEnSBemyfqsTrr4C_ilf3koUOS6_w2pE

brettule said:
Thanks, fixed the soft brick on my 920i. Used the Indian 5.1.1 version but it takes an age to download. Here is an alternate link.
https://mega.co.nz/#!VZcARCrC!-Zj8gwLGkqmlEnSBemyfqsTrr4C_ilf3koUOS6_w2pE
Click to expand...
Click to collapse
Thanks for the link. I panicked when this happened, glad i was able to find this topic through google
---------- Post added at 02:46 PM ---------- Previous post was at 02:39 PM ----------
Okay, so it failed. Now what?
I'm starting to panic lol.
<OSM> Please wait..
<OSM> G920IDVU2COF8_G920IODD2COF8_G920IDVU2COF8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1005)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Can't open the specified file. (Line: 2012)
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
**EDIT**
for anyone else that may ever encounter this.. .make sure your "re-partition" option is unchecked in odin.

Galaxy S6 and Galaxy S6 edge could soon get Marshmallow in Poland

http://www.sammobile.com/2016/02/09...s6-edge-could-soon-get-marshmallow-in-poland/
Sent from my SM-G925F using Tapatalk

I already flashed Poland T-Mobile FW but no update yet.

How to flash the T-Mobile Poland firmware from sammobile ? When i try with all steps with odin its says fail ..
Any help ?

Producenta said:
How to flash the T-Mobile Poland firmware from sammobile ? When i try with all steps with odin its says fail ..
Any help ?
Click to expand...
Click to collapse
When does Odin says Fail? I installed Poland (T-Mobile) TPL without problems. Maybe it's problem with the file you downloaded, try download again. You can download it faster through SamFirm tool.
Or follow this solution > http://forum.xda-developers.com/galaxy-s6/help/solved-stuck-download-mode-failed-odin-t3104736
.

MobileTechArena said:
When does Odin says Fail? I installed Poland (T-Mobile) TPL without problems. Maybe it's problem with the file you downloaded, try download again. You can download it faster through SamFirm tool.
Or follow this solution > http://forum.xda-developers.com/galaxy-s6/help/solved-stuck-download-mode-failed-odin-t3104736
.
Click to expand...
Click to collapse
It fails at the end of flashing after the System flash stage i downloaded this:
Model SM-G920F
Model name GALAXY S6
Country Poland (T-mobile)
Version Android 5.1.1
Changelist 5630845
Build date Fri, 20 Nov 2015 02:35:35 +0000
Product code TPL
PDA G920FXXS3QOK2
CSC G920FDPX3QOIT
Im using front USB port of the computer could that be a problem , but restoring with Smart Switch works fine ..?
Also checked the file for download fails with winrar well it sayd no error detected ..
Here is an example of similar to my text when the fail accured :
"<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9195UBUBNA2_I9195CHOBMK1_I9195UBUBNA2_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)"
Its not mine becouse i didnt copyed it just found that on the internet ..but my is almost similar.
So any help ?

Producenta said:
It fails at the end of flashing after the System flash stage i downloaded this:
Model SM-G920F
Model name GALAXY S6
Country Poland (T-mobile)
Version Android 5.1.1
Changelist 5630845
Build date Fri, 20 Nov 2015 02:35:35 +0000
Product code TPL
PDA G920FXXS3QOK2
CSC G920FDPX3QOIT
Im using front USB port of the computer could that be a problem , but restoring with Smart Switch works fine ..?
Also checked the file for download fails with winrar well it sayd no error detected ..
Here is an example of similar to my text when the fail accured :
"<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9195UBUBNA2_I9195CHOBMK1_I9195UBUBNA2_HOME.tar.md 5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)"
Its not mine becouse i didnt copyed it just found that on the internet ..but my is almost similar.
So any help ?
Click to expand...
Click to collapse
Update is live in Poland.
---------- Post added at 04:27 PM ---------- Previous post was at 04:27 PM ----------
aromerblz said:
Update is live in Poland.
Click to expand...
Click to collapse
Also what is your phone Model? If you have Ractivation lock it will fail also when trying to flash.

Is anyone has update already ? I want to install the 5.1.1 poland but I really wanna be sure that phone will have OTA update.

have not received any update

skejcik said:
have not received any update
Click to expand...
Click to collapse
It isn't helpful for people to post 'I have not got the update'. Can people just hold fire until they've got it and then post? :good:

aromerblz said:
Update is live in Poland.
---------- Post added at 04:27 PM ---------- Previous post was at 04:27 PM ----------
Also what is your phone Model? If you have Ractivation lock it will fail also when trying to flash.
Click to expand...
Click to collapse
I think in Download mode it says Reactivation Lock OFF but how to turn it off just in case i know if its in fact ON ?
Phone model is SM-G920F
Here is the error:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> cm.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> modem.bin
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Has anyone got the update?
Sent from my SM-G920F using Tapatalk

Producenta said:
I think in Download mode it says Reactivation Lock OFF but how to turn it off just in case i know if its in fact ON ?
Phone model is SM-G920F
Here is the error:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> cm.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> modem.bin
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
You can turn off by going to Settings » Lock screen and security » Find My Mobile » and turn off the reactivation lock.
Also, If your firmware version is higher than the one you are trying to flash it may not let you flash it. This happened to me when trying to change region on my SM-G920I.

aromerblz said:
You can turn off by going to Settings » Lock screen and security » Find My Mobile » and turn off the reactivation lock.
Also, If your firmware version is higher than the one you are trying to flash it may not let you flash it. This happened to me when trying to change region on my SM-G920I.
Click to expand...
Click to collapse
Just checked Reactivation Lock is Off
Well i guess so its becouse its higher firmware im also at 5.1.1 with my Stock but how some people are able to flash it without problem or im flashing wrong firm ? Can you give link to the EXACT one that i need
Also are they going to release the 6.0.1 firm for direct flash with odin ?

bigbamboo5 said:
It isn't helpful for people to post 'I have not got the update'. Can people just hold fire until they've got it and then post? :good:
Click to expand...
Click to collapse
Seeing how someone just said above him that the update is live I would think that him say that it's not love is helpful. There have been claims almost everyday that the update has rolled out somewhere when in fact it has not.
Sent from my SM-G920T using Tapatalk

WolfsFang said:
Seeing how someone just said above him that the update is live I would think that him say that it's not love is helpful. There have been claims almost everyday that the update has rolled out somewhere when in fact it has not.
Sent from my SM-G920T using Tapatalk
Click to expand...
Click to collapse
http://www.sammobile.com/2016/02/09...r-the-galaxy-s6-and-galaxy-s6-edge-in-poland/
---------- Post added at 07:45 PM ---------- Previous post was at 07:44 PM ----------
WolfsFang said:
Seeing how someone just said above him that the update is live I would think that him say that it's not love is helpful. There have been claims almost everyday that the update has rolled out somewhere when in fact it has not.
Sent from my SM-G920T using Tapatalk
Click to expand...
Click to collapse
It has to be the latest one for the Polish T-Mobile variant.
---------- Post added at 07:48 PM ---------- Previous post was at 07:45 PM ----------
Producenta said:
Just checked Reactivation Lock is Off
Well i guess so its becouse its higher firmware im also at 5.1.1 with my Stock but how some people are able to flash it without problem or im flashing wrong firm ? Can you give link to the EXACT one that i need
Also are they going to release the 6.0.1 firm for direct flash with odin ?
Click to expand...
Click to collapse
This is the latest one on sammobilehttp://www.sammobile.com/firmwares/download/61935/G920FXXS3QOK2_G920FDPX3QOIT_TPL/
Also yes the odin firmware flash file will be available.. just give it a few days.

aromerblz said:
http://www.sammobile.com/2016/02/09...r-the-galaxy-s6-and-galaxy-s6-edge-in-poland/
---------- Post added at 07:45 PM ---------- Previous post was at 07:44 PM ----------
It has to be the latest one for the Polish T-Mobile variant.
---------- Post added at 07:48 PM ---------- Previous post was at 07:45 PM ----------
This is the latest one on sammobilehttp://www.sammobile.com/firmwares/download/61935/G920FXXS3QOK2_G920FDPX3QOIT_TPL/
Also yes the odin firmware flash file will be available.. just give it a few days.
Click to expand...
Click to collapse
Well, let's fly to Poland and see whether the OTA kicks in! I mean flashing alright. Chill. xD

aromerblz said:
http://www.sammobile.com/2016/02/09...r-the-galaxy-s6-and-galaxy-s6-edge-in-poland/
---------- Post added at 07:45 PM ---------- Previous post was at 07:44 PM ----------
It has to be the latest one for the Polish T-Mobile variant.
---------- Post added at 07:48 PM ---------- Previous post was at 07:45 PM ----------
This is the latest one on sammobilehttp://www.sammobile.com/firmwares/download/61935/G920FXXS3QOK2_G920FDPX3QOIT_TPL/
Also yes the odin firmware flash file will be available.. just give it a few days.
Click to expand...
Click to collapse
Sorry not going to trust links anymore. How many times has someone posted a link saying that mm has rolled out somewhere when it never did. When we have users saying they got the update than that's when I'll trust the source.
Sent from my SM-G920T using Tapatalk

WolfsFang said:
Sorry not going to trust links anymore. How many times has someone posted a link saying that mm has rolled out somewhere when it never did. When we have users saying they got the update than that's when I'll trust the source.
Sent from my SM-G920T using Tapatalk
Click to expand...
Click to collapse
I agree about trusting links... But this one is from the polish tmobile website and also posted by sammobile. That's about as legit as it gets.
Sent from my SM-G925T using Tapatalk

Producenta said:
Just checked Reactivation Lock is Off
Well i guess so its becouse its higher firmware im also at 5.1.1 with my Stock but how some people are able to flash it without problem or im flashing wrong firm ? Can you give link to the EXACT one that i need
Also are they going to release the 6.0.1 firm for direct flash with odin ?
Click to expand...
Click to collapse
The reason why it failed is because the firmware has specific network addons that needs a bigger hidden.img partition.

Can I flash T-mobile rom when I'm on the 6.0.1 Beta BTU? My phone is originally from T-mobile Poland.

PLEASE HELP!!, How to solve this issue with my Samsung Galaxy Note-3 (SM-N9005)

Hello everyone
I was trying to flash my Samsung Galaxy Note 3 (16GB Variant) with Odin3 (almost all the versions). Every time it gives and error on Odin
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005VJSGBPL4_N9005ZTOGBOK2_N9005VJUGBOL1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Ext4)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and on my Phone, it says :
Volume Size is too big 4620288 < 4718592
ODIN : Invalid ext4 image
I was searching all over the internet, watching many videos for resolving this issue and tried all the method suggested by everyone, but nothing will works. I tried CWM & TWRP Recovery, downloaded so many firmwares but nothing will resolve this issue, and now finally one of my friends suggest me to discuss my problem here, and I will definitely get the solution here.
Hoping to get the solution very soon and can use my phone again.
few more details of my phone
Model No. : SM-N9005
SSN : N9005GSMH
S/N : RF8F40S772R
and it's a 16GB ROM & 3GB RAM Variant.
Thanks in advance....:fingers-crossed::fingers-crossed:

First of all.... what did you try to do ? Did you want to bring your phone back to the original firmware? If so, you've probably flashed the wrong firmware... It is not so clear what you're talking about....

Its failing at system image suggest wrong firmware.

Hereiwas said:
First of all.... what did you try to do ? Did you want to bring your phone back to the original firmware? If so, you've probably flashed the wrong firmware... It is not so clear what you're talking about....
Click to expand...
Click to collapse
Thanks for your response
Actually, my phone's WiFi and Bluetooth aren't working properly, so I have tried to flash the firmware to resolve this issue and I'm not sure with the current version of my phone's firmware, but I know that I have updated my phone (Samsung Galaxy Note 3) with it's latest official update by Samsung which is Lollipop but not sure with the version 5.0 or 5.1.1
I have downloaded the Firmware of 5.0 from a website and trying to flash my phone with it and then the rest of all I've mentioned in my post.
And now as you suggested... how do I know that which firmware is the right for my phone.

JJEgan said:
Its failing at system image suggest wrong firmware.
Click to expand...
Click to collapse
How do I know, which one is the right firmware?

rsboss880 said:
How do I know, which one is the right firmware?
Click to expand...
Click to collapse
Boot to Download mode and you'll find your device model written in the upper left corner of the screen.

zlazaar said:
Boot to Download mode and you'll find your device model written in the upper left corner of the screen.
Click to expand...
Click to collapse
I know that and I have already downloaded the same, but I want to know that downloading any version of firmware will help or I need any specific version to perform the flash. Because right now I have the 5.0 version of Firmware and it makes the error which I've already mentioned.
Thanks for your time dear....

You should flash the firmware for your phone .
That is the later version of the original firmware from the supplying network .
Its 16 gb not 32 gb version .
You are from South Americas ??
---------- Post added at 02:08 PM ---------- Previous post was at 02:02 PM ----------
16GB Hong Kong model maybe

No brother, I'm from India...and can you please tell me that how can I flash the firmware for my phone.
It's a 16 GB variant, but don't know which region... did some searches regarding this and found that my phone's IMEI no has 05 at the 7th and 8th place which tells that it is from Brazil/ USA/ Finland region.

USA does not have N9005
Finland does not have firmware
Brazil has 4 network firmwares
Need to know the original supplier / country
Try connecting to KIES.

Is there ant another way to find the supplier country. Cause KIES isn't recognize my phone..

Yes the box the phone came in.

JJEgan said:
Yes the box the phone came in.
Click to expand...
Click to collapse
Brother, I don't have the box. Any other way?

Thank you so much all of you, finally I got the original country for my device which is Hong Kong and CSC code is TGY. downloaded the firmware for same and flash with it..
Thank you once again all..