Help me!
Mobile LG G2 D-802
NO Recovery mode, No download mode, No USB Not visible:crying:
I have followed all your given steps. the only issue is its still not getting any better.
Installed Ubuntu.
Did all the steps.
But the files are shown copied but when i give the command "gdisk -l /dev/sdb" the files dont show any change.
And the phone when restarted is still the same.
please can you help me out in this.
Thanks a lot.
Regards.
????????
i have a bricked lg g2 d802t after ota update.
phone was recongnised from pc as qhsusb_bulk but after ubuntu method posted here Fix No recovery, download mode.. i think i made a mistake flashing boot partition?
now phone wont turn on, no download mode, recovery mode or anything else, but when connected to pc it shows qhsusb_bulk in the device manager, but the is still off and wont turn on.. do you have idea to fix this problem? please help me
anybody is experiencing the same state as i have? please help..
which partitions did you flash ?
bender_007 said:
which partitions did you flash ?
Click to expand...
Click to collapse
i only followed the instructions here and flashed the provided .img by the way im on official kitkat firmware, the provided .img is for jb right? do you think this can be still fix without going to service center? :crying:
scout1089 said:
i only followed the instructions here and flashed the provided .img by the way im on official kitkat firmware, the provided .img is for jb right? do you think this can be still fix without going to service center? :crying:
Click to expand...
Click to collapse
Flash only aboot, boot, laf. You need the d802T for aus i think.
bender_007 said:
Flash only aboot, boot, laf. You need the d802T for aus i think.
Click to expand...
Click to collapse
how can i do that? because i dont have download mode, nor the phone turns on, pc wont detect or recognize the phone anymore when connected, all i got is qhsusb_bulk in the device manager and no multiple drives shown in my computer like before, also ubuntu wont recognize nor detect it also.. :crying:
Try with knoppix m8.
bender_007 said:
Try with knoppix m8.
Click to expand...
Click to collapse
can you provide the link for the knoppix m8?
so im going to run this instead of ubuntu and follow the same instructions stated on the tutorial mentioned? and only flash the 3 .img aboot, boot, laf? am i right? so im going to extract the kdz in order to get the 3 .img specific to my device?
http://knoppix.net/get.php just the 3. Find your original kdz m8
bender_007 said:
http://knoppix.net/get.php just the 3. Find your original kdz m8
Click to expand...
Click to collapse
im going to extract the D802T kdz and get the 3 .img from it? sorry still a noob and could you please explain and guide me through?
edit: after booting with knoopix, inserted the phone still cant be read.. i found no biggest number and all numbers are the same 1-15, seems it did'nt detect the phone, please help
can someone else who manage to revive their phone help me?
please help
i didnt get it ..
ur pc recognize the device as qhsusb ? or doesnt recognize it at all ?
rotem11 said:
i didnt get it ..
ur pc recognize the device as qhsusb ? or doesnt recognize it at all ?
Click to expand...
Click to collapse
when connected to pc, it displays qhsusb_bulk in the device manager and nothing no multiple drives, the phone does not turn on but i think its on even though the screen looks dead because when i left it for an hour i felt the phone's battery is warm..
try go ubuntu and follow this guide http://forum.xda-developers.com/showthread.php?t=2681089
maozer said:
try go ubuntu and follow this guide http://forum.xda-developers.com/showthread.php?t=2681089
Click to expand...
Click to collapse
already did ubuntu wont detect the phone
can u try ubuntu with vmware?
maozer said:
can u try ubuntu with vmware?
Click to expand...
Click to collapse
im using the usb method, if the usb method didnt detect the phone so i guess the vmware wont too?
also tried knoppix it wont detect the phone's partition
well i had the exact same problem u have.. you can look at my previous posts..
i dont know why but it worked for me with vmware.. and in ur situation it worth a shoot.
one of the Initial Symptoms are qhsusb.. try it and let me know..
maozer said:
well i had the exact same problem u have.. you can look at my previous posts..
i dont know why but it worked for me with vmware.. and in ur situation it worth a shoot.
one of the Initial Symptoms are qhsusb.. try it and let me know..
Click to expand...
Click to collapse
okey i'll give it a shoot.. thank you
Hello!
Good afternoon masters!
My LG G2 was hard bricked after i [very intelligent man (sarcasm)] flashed a ROM and Efficient Kernel without wipe nothing!
My phone can't enter in recovery mode, download or fastboot.. the PC recognize him in PdaNet installed, but in ADB i can't execute any command
because the status of device is "unauthorized" and i don't have access to the screen to confirm the authorization.
Obs:
Red LED light ON while pluged in PC.
Try to ON the device shows blank stripes in LG logo boot and shades of gray.. after this the screens off.
Thanks for all and sorry for my english!
[EDIT]:
Aaaw Yeah! I won, masters!
The problem has solved now!
1: I followed this tutorial
Then: I followed the tutorial that the master dredd2099 passed me. Thank you too man!
Obs: if you don't have Linux to follow the tutorial passed by dredd2009.. try this tutorial on youtube.
Obs 2: if your PC recognize the device like qhsusb_bulk 9008 (don't recognize disk parts in PC.. only COM port in Device Manager) instead of 9006.. try this tutorial
Thanks for all! [very happy]
have you checked here, might help, sounds similar at least
dredd2099 said:
have you checked here, might help, sounds similar at least
Click to expand...
Click to collapse
Thanks for answer my friend!
In the post of your reply.. the PC detects device as qhsusb_bulk with multiple drivers, in my case unfortunately not.
In my case, the PC only detects device in ADB as unauthorized.
Thanks a lot .
no startup no download mode and no recovery. Can someone please upload the debrick.img.
Thanks
Try charging it and see if it boots at the least(shows Samsung logo/a3 logo) if it doesn't do that at the least then it my be a hard brick that can't be fixed.
I may be wrong but, hard-bricks are not recoverable through any kind of flashing we're used to.
bader400h said:
no startup no download mode and no recovery. Can someone please upload the debrick.img.
Thanks
Click to expand...
Click to collapse
How did that happen?
bader400h said:
no startup no download mode and no recovery. Can someone please upload the debrick.img.
Thanks
Click to expand...
Click to collapse
Oh MAN! try this :::: Charge ur phone and see if there is any change if no thn connect it to pc or laptop and try booting it into download mode, Power + home + vol' down key!! if u hear sound (device connecting sound) then there is chance of recovery
If the device doesn't do anything I described in my first post, its dead and done. You'll need to buy a new phone
EDIT - I finally got it to connect!
I assume that I bricked my phone today. I've been trying to use the msm recovery tool and the program is not even recognizing my phone. When I plug in my phone to the pc you can hear the connection. I also tested it by trying to fastboot. Which once it is done fastbooting I get the crashdump mode. Can someone please help.
That's good news!
How did you do it? Please explain here stepwise bro so that it can help others.