[Q] Help please all professionals - Galaxy Note 3 Q&A, Help & Troubleshooting
my device is note 3 china i think and have the following info
Model : SM-N9000
FCC ID : A3L SMN9000
SSN :- N9000GSMH
made in korea by samsung
=====================================
i was try to flash other rom than the original and i think i break it ,,
for my lucky i used MtkDroidTools v2.5.3 and made backup before i break it
any way ....... i can not flash the backup again or even cannot flash any rom in it
always have errors in SP flash tool about Enable DRAM
this error appear even when i try to use my original backup ( i think the wrong rom i tried did something ) , and also when try to format same error appaer .
any way i also get my SW & HW info before i make flashin ,,, as follow
AP = N9006XXU1ANCD
CP = N9006XXU1ANCE
CSC = N9006UUB1ANCD
RF = 2014.3.27
HW REV. = MP 0.800
................... can some one please help me in my problem . i need the exact rom of my phone and if there is any other way to flash ( may be odin) .
THANKS
my PHONE info file from MtkDroidTools v2.5.3 shows this data :
Hardware : MT6572 (UNIVERSAL5410 is Fake!)
Model : SM-N9006
Build number : JSS15J.N9006ZCUBMI5
Build date UTC : 20140505-074253
Android v : 4.3
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V1, 2013/07/04 15:16
Kernel v : 3.4.0-1590669 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Mon May 5 15:38:58 CST 2014
Uboot build v : -----
LCD Driver IC : 1-otm9605_qhd_dsi_vdo
decortiga said:
my device is note 3 china i think and have the following info
Model : SM-N9000
FCC ID : A3L SMN9000
SSN :- N9000GSMH
made in korea by samsung
=====================================
i was try to flash other rom than the original and i think i break it ,,
for my lucky i used MtkDroidTools v2.5.3 and made backup before i break it
any way ....... i can not flash the backup again or even cannot flash any rom in it
always have errors in SP flash tool about Enable DRAM
this error appear even when i try to use my original backup ( i think the wrong rom i tried did something ) , and also when try to format same error appaer .
any way i also get my SW & HW info before i make flashin ,,, as follow
AP = N9006XXU1ANCD
CP = N9006XXU1ANCE
CSC = N9006UUB1ANCD
RF = 2014.3.27
HW REV. = MP 0.800
................... can some one please help me in my problem . i need the exact rom of my phone and if there is any other way to flash ( may be odin) .
THANKS
my PHONE info file from MtkDroidTools v2.5.3 shows this data :
Hardware : MT6572 (UNIVERSAL5410 is Fake!)
Model : SM-N9006
Build number : JSS15J.N9006ZCUBMI5
Build date UTC : 20140505-074253
Android v : 4.3
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V1, 2013/07/04 15:16
Kernel v : 3.4.0-1590669 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Mon May 5 15:38:58 CST 2014
Uboot build v : -----
LCD Driver IC : 1-otm9605_qhd_dsi_vdo
Click to expand...
Click to collapse
!!!! 55 views and no one any answer OMG is my phone dead or what ?!!!!
please any help.
decortiga said:
!!!! 55 views and no one any answer OMG is my phone dead or what ?!!!!
please any help.
Click to expand...
Click to collapse
What's the problem with your phone?
Try to get your phones rom, why do you flashed other roms files.
Your now might be a ? now.
decortiga said:
!!!! 55 views and no one any answer OMG is my phone dead or what ?!!!!
please any help.
Click to expand...
Click to collapse
Your device is fake/clone. No one official firmware that you try to flash will work.
decortiga said:
my device is note 3 china i think and have the following info
Model : SM-N9000
FCC ID : A3L SMN9000
SSN :- N9000GSMH
made in korea by samsung
=====================================
i was try to flash other rom than the original and i think i break it ,,
for my lucky i used MtkDroidTools v2.5.3 and made backup before i break it
any way ....... i can not flash the backup again or even cannot flash any rom in it
always have errors in SP flash tool about Enable DRAM
this error appear even when i try to use my original backup ( i think the wrong rom i tried did something ) , and also when try to format same error appaer .
any way i also get my SW & HW info before i make flashin ,,, as follow
AP = N9006XXU1ANCD
CP = N9006XXU1ANCE
CSC = N9006UUB1ANCD
RF = 2014.3.27
HW REV. = MP 0.800
................... can some one please help me in my problem . i need the exact rom of my phone and if there is any other way to flash ( may be odin) .
THANKS
my PHONE info file from MtkDroidTools v2.5.3 shows this data :
Hardware : MT6572 (UNIVERSAL5410 is Fake!)
Model : SM-N9006
Build number : JSS15J.N9006ZCUBMI5
Build date UTC : 20140505-074253
Android v : 4.3
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V1, 2013/07/04 15:16
Kernel v : 3.4.0-1590669 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Mon May 5 15:38:58 CST 2014
Uboot build v : -----
LCD Driver IC : 1-otm9605_qhd_dsi_vdo
Click to expand...
Click to collapse
Try to flash the original one back.
But please make sure to connect your USB-Connector properly on the computer and to be sure, use an USB 2.0-Port.
I hope, this helped.
decortiga said:
my device is note 3 china i think and have the following info
Model : SM-N9000
FCC ID : A3L SMN9000
SSN :- N9000GSMH
made in korea by samsung
=====================================
i was try to flash other rom than the original and i think i break it ,,
for my lucky i used MtkDroidTools v2.5.3 and made backup before i break it
any way ....... i can not flash the backup again or even cannot flash any rom in it
always have errors in SP flash tool about Enable DRAM
this error appear even when i try to use my original backup ( i think the wrong rom i tried did something ) , and also when try to format same error appaer .
any way i also get my SW & HW info before i make flashin ,,, as follow
...
Click to expand...
Click to collapse
Near as I can tell from a quick Google, your phone SW is N9006ZCUBMI5 so you need to search for, and download that to flash. Being a Clone there doesn't seem to be much else available for it so that's pretty much your only shot I think.
Hannah Stern said:
Try to flash the original one back.
But please make sure to connect your USB-Connector properly on the computer and to be sure, use an USB 2.0-Port.
I hope, this helped.
Click to expand...
Click to collapse
i already try to flash back the original backup but still same error appear , Enable DRAM fail
Journyman16 said:
Near as I can tell from a quick Google, your phone SW is N9006ZCUBMI5 so you need to search for, and download that to flash. Being a Clone there doesn't seem to be much else available for it so that's pretty much your only shot I think.
Click to expand...
Click to collapse
i was search for rom with model number and downloaded about 5 version and all roms cannot be flashed due to same error of Dram fail
i will try to search again with the build number N9006ZCUBMI5 as you said ,
i will post the results
thanks
again same problem
Enable Dram Fail
what is this error slution OMG
even with the original backup !!!!
can some one please please give link for usb drivers of this model
because my pc dont recognize it .
may be that is the cause ?
decortiga said:
again same problem
Enable Dram Fail
what is this error slution OMG
even with the original backup !!!!
can some one please please give link for usb drivers of this model
because my pc dont recognize it .
may be that is the cause ?
Click to expand...
Click to collapse
Haha, and you flashed what then, when your phone isn't even connected? ?
Return and buy an original one
decortiga said:
again same problem
Enable Dram Fail
what is this error slution OMG
even with the original backup !!!!
can some one please please give link for usb drivers of this model
because my pc dont recognize it .
may be that is the cause ?
Click to expand...
Click to collapse
See
http://forum.xda-developers.com/showthread.php?t=2460126
Drivers samsung /support/ but its not a samsung .
still same error and i think i missed some thing in drivers and all i want is to flash my backup original rom that i made with MtkDroidTools v2.5.3
just please some one send me link of driver and guide to install them , i will be so appreciated
thanks again
please guys some help here or any idea ?
i need the exact preloader or even the complete rom of this devise :
Hardware : MT6572 (UNIVERSAL5410 is Fake!)
Model : SM-N9006
Build number : JSS15J.N9006ZCUBMI5
Build date UTC : 20140505-074253
Android v : 4.3
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V1, 2013/07/04 15:16
Kernel v : 3.4.0-1590669 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Mon May 5 15:38:58 CST 2014
Uboot build v : -----
LCD Driver IC : 1-otm9605_qhd_dsi_vdo
really i can not flash my backup and also my pc dont recognize the devise ( only show MTK com and it keeps connect and disconnect ) no ADB or any VCOM ports
and also my phone dont show charge icon when i connect to charger
i think it is because wrong preloader
so please some one upload for me correct preloader.bin and correct scatter file
Thanks agin.
I don't want to be a stick in the mud... but this forum is for original phones where people can actually provide help for.
This is the price you paid for getting a knock-off. Return it... if not possible, just gonna have to buy an original next time (from somewhere more reputable).
I'm hoping a mod closes this already.
We can't help you with fakes because they offer vastly different hardware (and software) from the originals. Thread closed.
Related
[Q] samsung s4 clone boot loop problem
really need help for my s4 problem rooted by framaroot when i install cf3d it will be hang on booting.. and ill go to technichan to solve it but nothing happens.. ill try to read your forum and ill join to help my problem.. my phone is device name: galaxy s4 model number: GT-19500 andriod version: 4.4.4 baseband version: 19500XXUAMDE kernel version: 3.4.5 [email protected]#1 thu dec 5 21:22:09 cst 2013 build number: JDQ39.19500XXUAMDE software version: v92.04 when i connect to pc the driver read as F: Linux File-Cd gadget Usb Device G: Linux File-Cd gadget Usb Device ?Other Device ?CDC serial i cant open that driver.. how do i back my s4 running like new as i buy?!! please help me for my problem thank you
Hian As chainfire clearly stated. 'install on honeycomb, ice cream and jellybean at your own risk' You have successfully bricked your device. Get a stock ROM and flash using sptool.
You bricked your phone. you will need to download stock firmware and flash it VIA Odin you can download the stock firmware here : sammobile.com hope i helped you
I thought he says clone? Which probably mtk clone. So Odin will not work Device Evolutions Nokia unknown model Nokia 3310 Nokia 1100 Nokia 1208 Nokia 3110 Nokia E65 Nokia N70 Nokia E66 Nokia E5 LG Forgotten Model Techno N3 Current Divice Gionee Pioneer P2 Sent through it using xda premium android app
XDA dont give support to clones. Sorry
:crying: oh my god..is there any solution??
arabela said: :crying: oh my god..is there any solution?? Click to expand... Click to collapse not really, its already "hard" getting solutions for original devices.... :/ unless someone had had your exact same problem and fixed it... I think you should start thinking on getting a new phone
Try this link: http://freaktab.com/ it has many relation with chinese devices.
we have same phone try here look samsung clones too http://forum.xda-developers.com/showthread.php?t=2438160 Idk exactly if our phone is spark or legend
Can't update my note 3
I flashed an official Samsung software through Odin, and after I finished, I found that I lost the IMEI number. So I had to flash a new software through "Z3X Box" and it gives me a new IMEI. Since then every time I try to check for update I got this message: "Failed to update software. Network or server error occurred. Try later or try using PC Kies" Phone information: Android version 4.4.2 Baseband version N900XXUBMI2 Kernel version 3.4.39-694641 [email protected] #1 Tue Mar 4 14:03:13 KST 2014 Build number KOT49H.N900XXUDNC1 SE for android status Enforcing SEPF_SM-N900_4.4.2_0005 Model number Sm-n900 New IMIE 004999010640000 Old IMIE 359543056219419 Thanks for your help.
mashkuov said: i flashed an official samsung software through odin, and after i finished, i found that i lost the imei number. So i had to flash a new software through "z3x box" and it gives me a new imei. Since then every time i try to check for update i got this message: "failed to update software. Network or server error occurred. Try later or try using pc kies" phone information: Android version 4.4.2 baseband version n900xxubmi2 kernel version 3.4.39-694641 [email protected] #1 tue mar 4 14:03:13 kst 2014 build number kot49h.n900xxudnc1 se for android status enforcing sepf_sm-n900_4.4.2_0005 model number sm-n900 new imie 004999010640000 old imie 359543056219419 thanks for your help. Click to expand... Click to collapse why do we care about you note 3 in our note 4 thread with 4.4.4 and above
Uniquebarbee said: why do we care about you note 3 in our note 4 thread with 4.4.4 and above Click to expand... Click to collapse I'm really sorry, my fault. can somebody please move it because I don't know how to do it. sorry again >_<
I copied it to the right section, can somebody please delete this one, sorry for the mistake. Thanks. Sent from my Nexus 5
Note 3 Accelerometer gyroscope not working
Hello i have a note 3 which got bricked then i repaired brick and baseband issues . But currently Accelerometer and groscpe is not working. i visiually checked the hardware there is no sign of any damage. At sensor hub test accelerometer continusly shows ; ACC Raw Data - x 19, y: 84, z: 0 x-angle:12, y-angle: 77, z-angle: 0 Gyroscope Sensor continusly shows ; GYROSCOPE: Y: 0, P: 0, R: 0 And device infor is ; Model number SM-9005 Android version 4.4.2 Baseband version N9005XXUGNG1 Kernel version 3.4.0-1955971 [email protected] #1 Mon Jul 28 21:49:56 KST 2014 Build number KOT49H.N9005XXUGNG1 SE for Android status Enforcing SEPF_SM-N9005_4.4.2_0016 Mon Jul 28 21:49:39 2014 Security software version MDF v1.0 Release 3 i checked forums but i did not see a relevant issue forum(please referme if there is any i also dont like repeative threads ), my guess is that calibration folder is corrupted , so i would like to ask what could be the reason and how to fix ? (since i am electrical engineer i like to have detailed information ) Your helps and toughts will be appreciated. Best regards.
KARABESK said: Hello i have a note 3 which got bricked then i repaired brick and baseband issues . But currently Accelerometer and groscpe is not working. i visiually checked the hardware there is no sign of any damage. At sensor hub test accelerometer continusly shows ; ACC Raw Data - x 19, y: 84, z: 0 x-angle:12, y-angle: 77, z-angle: 0 Gyroscope Sensor continusly shows ; GYROSCOPE: Y: 0, P: 0, R: 0 And device infor is ; Model number SM-9005 Android version 4.4.2 Baseband version N9005XXUGNG1 Kernel version 3.4.0-1955971 [email protected] #1 Mon Jul 28 21:49:56 KST 2014 Build number KOT49H.N9005XXUGNG1 SE for Android status Enforcing SEPF_SM-N9005_4.4.2_0016 Mon Jul 28 21:49:39 2014 Security software version MDF v1.0 Release 3 i checked forums but i did not see a relevant issue forum(please referme if there is any i also dont like repeative threads ), my guess is that calibration folder is corrupted , so i would like to ask what could be the reason and how to fix ? (since i am electrical engineer i like to have detailed information ) Your helps and toughts will be appreciated. Best regards. Click to expand... Click to collapse If it isn't hardware it should be fixable using a stock firmware. Use Phone INFO Samsung from play store to check what your CSC actually is and download an image from Sammobile. Then shut off the phone, start Odin on PC, then after a while (I usually remove battery, hold down power for a bit to flatten the main board, then replace battery and use Home+Vol Down+Power to start phone into DL mode and connect to PC. Then flash the stock firmware and check if it's fixed.
Journyman16 said: If it isn't hardware it should be fixable using a stock firmware. Use Phone INFO Samsung from play store to check what your CSC actually is and download an image from Sammobile. Then shut off the phone, start Odin on PC, then after a while (I usually remove battery, hold down power for a bit to flatten the main board, then replace battery and use Home+Vol Down+Power to start phone into DL mode and connect to PC. Then flash the stock firmware and check if it's fixed. Click to expand... Click to collapse Hmm ok. i will try this one when i dl it Model SM-N9005 Model name GALAXY Note 3 LTE Country Poland Version Android 5.0 Changelist 3643614 Build date Wed, 25 Feb 2015 12:57:23 +0000 Product code XEO PDA N9005XXUGBOB6 CSC N9005XEOGBOA4 İ hope it will work
i did flash still same issue
KARABESK said: i did flash still same issue Click to expand... Click to collapse Gyroscope selftest failz also rest of the sensors works as intended. any idea ?
Has to be hardware .
(REQ) A8 root SM-A800I SOLVED
I know this is the dev forum section and not allow to put req threads but you devs should look at our (normal people :angel issues , because you're our only hope can you look into this thread please: http://forum.xda-developers.com/samsung-a-series/help/req-samsung-galaxy-a8-sm-a800i-root-t3259193 no one has rooted this device yet, we broke our device trying maybe a little help from devs can do the trick. Device info: Model: SM-A800I Software: Android: 5.1.1 (32-bit) Baseband: A800IXXU1AOJ6 SDK Version: 22 Kernel: 3.10.9-5880483 [email protected] gcc version 4.8 (GCC) #1 SMP PREEMPT Thu Oct 1 19:23:51 KST 2015 Hardware: CPU Model: Samsung Exynos 5433 _ 64-bit _ 8 Cores GPU: Mali-T760 RAM: 1835MB we can provide any information (just reply to post) stock boot.img (they said it might help) https://www.dropbox.com/s/hyoaolar7lilpj2/boot.img?dl=0 Thanks a lot SOLVED I managed to get my phone rooted by following the instructions on this reply IzArsha said: Download my file here for samsung galaxy a800i root <<DOWNLOAD>>, and make sure you are on 5.1.1, flash it on pda using odin. make sure you enable usb debugging and oem unlock option. Dont tick auto restart, Flash it and when it is done, hold power button to restart, then see the magic and press thanks button! give feedback either it is working or not. and if you want to donate me, please press the donation button. thank you. Click to expand... Click to collapse it can be found on this thread (if you want to thank or donate)
why no one cares ?
i hve same model too looking for root but after try any root sofware still not working
hope to root SM-A8000 Android Version:5.1.1 A8000ZCU2AOG6
ROOTED AliSal said: I know this is the dev forum section and not allow to put req threads but you devs should look at our (normal people :angel issues , because you're our only hope can you look into this thread please: http://forum.xda-developers.com/samsung-a-series/help/req-samsung-galaxy-a8-sm-a800i-root-t3259193 no one has rooted this device yet, we broke our device trying maybe a little help from devs can do the trick. Device info: Model: SM-A800I Software: Android: 5.1.1 (32-bit) Baseband: A800IXXU1AOJ6 SDK Version: 22 Kernel: 3.10.9-5880483 [email protected] gcc version 4.8 (GCC) #1 SMP PREEMPT Thu Oct 1 19:23:51 KST 2015 Hardware: CPU Model: Samsung Exynos 5433 _ 64-bit _ 8 Cores GPU: Mali-T760 RAM: 1835MB we can provide any information (just reply to post) stock boot.img (they said it might help) https://www.dropbox.com/s/hyoaolar7lilpj2/boot.img?dl=0 Thanks a lot Click to expand... Click to collapse Download my file here for samsung galaxy a800i root <<DOWNLOAD>>, and make sure you are on 5.1.1, flash it on pda using odin. make sure you enable usb debugging and oem unlock option. Dont tick auto restart, Flash it and when it is done, hold power button to restart, then see the magic and press thanks button! give feedback either it is working or not. and if you want to donate me, please press the donation button. thank you.
IzArsha said: Download my file here for samsung galaxy a800i root <<DOWNLOAD>>, and make sure you are on 5.1.1, flash it on pda using odin. make sure you enable usb debugging and oem unlock option. Dont tick auto restart, Flash it and when it is done, hold power button to restart, then see the magic and press thanks button! give feedback either it is working or not. and if you want to donate me, please press the donation button. thank you. Click to expand... Click to collapse Thanks, it worked!
AliSal said: Thanks, it worked! Click to expand... Click to collapse I`m glad to know ,rooted is worked on your device .... but it`s not working for .i usr odin 1.85 to root but it fail the process .. Can u explain the whole process with images/pic ... Thank`s in advance ...
is it working on a800iz too ? any way to root a800iz ? and my big problem is removing frp on samsung a800iz ! can anybody help me?
gopy said: I`m glad to know ,rooted is worked on your device .... but it`s not working for .i usr odin 1.85 to root but it fail the process .. Can u explain the whole process with images/pic ... Thank`s in advance ... Click to expand... Click to collapse 1. use odin 3.10.7. 2. go into phone settings, enable usb debugging and oem unlock option 3. back to odin, click on AP button and select the root file 4. make sure only f-reset is checked in odin options 5. boot your phone to download mode and plug to pc 6. start should get you fixed.
AliSal said: I know this is the dev forum section and not allow to put req threads but you devs should look at our (normal people :angel issues , because you're our only hope can you look into this thread please: http://forum.xda-developers.com/samsung-a-series/help/req-samsung-galaxy-a8-sm-a800i-root-t3259193 no one has rooted this device yet, we broke our device trying maybe a little help from devs can do the trick. Device info: Model: SM-A800I Software: Android: 5.1.1 (32-bit) Baseband: A800IXXU1AOJ6 SDK Version: 22 Kernel: 3.10.9-5880483 [email protected] gcc version 4.8 (GCC) #1 SMP PREEMPT Thu Oct 1 19:23:51 KST 2015 Hardware: CPU Model: Samsung Exynos 5433 _ 64-bit _ 8 Cores GPU: Mali-T760 RAM: 1835MB we can provide any information (just reply to post) stock boot.img (they said it might help) https://www.dropbox.com/s/hyoaolar7lilpj2/boot.img?dl=0 Thanks a lot SOLVED I managed to get my phone rooted by following the instructions on this reply it can be found on this thread (if you want to thank or donate) Click to expand... Click to collapse Hey, any chance this method would also work for the 800iz ?
Ok Thank`s ,,, i`ll try with Odin 3.10 or any latest version ... Thank`s man ....... i have managed to root my device with Odin 3.10.7 ...
My phone is working corrrectly after root , but yesterday ilittel son is playing game on it & drain the battery power , when i plugin the wall outlet ,phone show error " Custom binary blocked by FRP Lock." and flashing the screen. .. now the phone doesn`t on ..... whats the problem .. any ouick way to boot into phone .
gopy said: My phone is working corrrectly after root , but yesterday ilittel son is playing game on it & drain the battery power , when i plugin the wall outlet ,phone show error " Custom binary blocked by FRP Lock." and flashing the screen. .. now the phone doesn`t on ..... whats the problem .. any ouick way to boot into phone . Click to expand... Click to collapse I told you to enable oem unlock last time, did you enable it? this is surely because oem unlock has been de-activated...
Vivacity said: I told you to enable oem unlock last time, did you enable it? this is surely because oem unlock has been de-activated... Click to expand... Click to collapse Yap ! u r right ...I have disable it after rooting the phone ... ... it means i have to enable it permanently .??
gopy said: Yap ! u r right ...I have disable it after rooting the phone ... ... it means i have to enable it permanently .?? Click to expand... Click to collapse yes it has to be enabled permanently. frp lock = factory reset protection lock
bro .help me out .. My problem starts a week ago . when i activate 'smart dual sim 'i.e recieve calls from both sim cards even during calls ..My problem starts after this .Now (1) when i call from either sim during ringing phone doesn`t show proper ringing . (2) while receiving calls from either sim I can`t listen voice from other side , and even he/she also not able to listen voice from my side .... PLZ Help me out of this problem ....
AliSal said: I know this is the dev forum section and not allow to put req threads but you devs should look at our (normal people :angel issues , because you're our only hope can you look into this thread please: http://forum.xda-developers.com/samsung-a-series/help/req-samsung-galaxy-a8-sm-a800i-root-t3259193 no one has rooted this device yet, we broke our device trying maybe a little help from devs can do the trick. Device info: Model: SM-A800I Software: Android: 5.1.1 (32-bit) Baseband: A800IXXU1AOJ6 SDK Version: 22 Kernel: 3.10.9-5880483 [email protected] gcc version 4.8 (GCC) #1 SMP PREEMPT Thu Oct 1 19:23:51 KST 2015 Hardware: CPU Model: Samsung Exynos 5433 _ 64-bit _ 8 Cores GPU: Mali-T760 RAM: 1835MB we can provide any information (just reply to post) stock boot.img (they said it might help) https://www.dropbox.com/s/hyoaolar7lilpj2/boot.img?dl=0 Thanks a lot SOLVED I managed to get my phone rooted by following the instructions on this reply it can be found on this thread (if you want to thank or donate) Click to expand... Click to collapse http://forum.xda-developers.com/samsung-a-series/development/galaxy-series-cf-auto-root-t3280406
Root for a800i marchmellow I need root for the same phone (SM-A800I) but I'am using 6.0.1 I have download it from sammobile.net Amd thanx you
zako.glore said: I need root for the same phone (SM-A800I) but I'am using 6.0.1 I have download it from sammobile.net Amd thanx you Click to expand... Click to collapse SM-A800I 6.0.1 - You flash this at your own risk. Please ensure you have the stock ROM to hand downloaded from SAMMOBILE in case of problems. This will trip the knox counter. Download these files along with odin 3.7 /download.chainfire.eu/951/CF-Root/CF-Auto-Root/CF-Auto-Root-a8hplte-a8hpltedx-sma800i.zip //ww.androidfilehost.com/?fid=24459283995313687 (twrp_3.0.2-0_sm-a800i) /download.chainfire.eu/969/SuperSU Place it in phone memmory (or sd card) http://forum.xda-developers.com/showthread.php?t=2711451 Odin 3.10.7 Make sure your device is in ODIN download mode (you can get there by holding VolDown+Home+Power when the device is turned off) Uncheck Auto reboot. Load the respective file below into the AP slot and hit start. 1./download.chainfire.eu/951/CF-Root/CF-Auto-Root/CF-Auto-Root-a8hplte-a8hpltedx-sma800i.zip 2. //ww.androidfilehost.com/?fid=24459283995313687 (twrp_3.0.2-0_sm-a800i) You should now see TWRP recovery. Install Downloaded SuperSu file through TWRP. Power off: holding POWER + VOL DOWN. 8-10 seconds if it is in boot loop. Hope you can root your phone with this steps.
Anybody here Plz report .. u success in rooting 6.0.1 (A800I ). with above method or not ...
SM-G9287 need help....
hi guys, i have S6 edge+ SM-G9287 with a troubleshoot like freeze 3 secs and then normal again, very often, this is my software info : Android version : 6.0.1 Baseband version : G9287ZHU2BPH2 Kernel version : 3.10.61-8926938 [email protected]#1 Fri Aug 5 20 :06:46 Build number : MMB29K.G9287ZHU2BPH2 SE for Android status : Enforcing SEPF_SECMOBILE_6.0.1_0020 anyone can help me ? or anyone know where i can find my firmware..?
doremonz26 said: hi guys, i have S6 edge+ SM-G9287 with a troubleshoot like freeze 3 secs and then normal again, very often, this is my software info : Android version : 6.0.1 Baseband version : G9287ZHU2BPH2 Kernel version : 3.10.61-8926938 [email protected]#1 Fri Aug 5 20 :06:46 Build number : MMB29K.G9287ZHU2BPH2 SE for Android status : Enforcing SEPF_SECMOBILE_6.0.1_0020 anyone can help me ? or anyone know where i can find my firmware..? Click to expand... Click to collapse Flashing the stock firmware is easy and it fixes all ur issues 98% of times (depends if u wipe or not) you can get your firmware files from fw.updato.com(works really fast but sometimes is down or http://sammobile.com(is always up but y need an account and its slow) And odin 3 the software needed to reflash stock firmware y can get it from here Keep in mind that a full wipe from the recovery is recomended to solve all 100% of issues but there is a chance your issue could be fixed without a wipe. Also you can flash the firmware from any country you like doesnt matter where ur from. Hope this helped