Does anyone have / can anyone post - the stock firmware for the Moto E 2015 for Wind Mobile? I'll take fastboot flashable images or a zip. I'm pretty happy with my CM build, but it'd be nice to have.. just in case. I (as usual) didn't do a nandroid before flashing.
Related
i need to unlock lte 1800 band (as available in xt905), so i need modded xt905 Aussie NON-HLOS to flash on my xt907 (cm11 kk bootloader)
can any one please share it... existing dropbox and google drive links are not working...
I wouldn't try this as it will brick the phone. Reason: different Trustzone signatures. There are / were peoples attempting to flash different NON-HLOS modem BIOS for the particular RAZR M (for example, XT907 NON-HLOS onto XT901. The result is pretty obvious: dead as a doornail). I am researching on RAZR M unbricking and I can pretty much tell you mucking around with the BIOS (bootloader) is a big NO-NO.
I guess you can flash the complete XT905 firmware on the XT907. It did work for me and even the modem does work for GSM (no idea about LTE or CDMA though). It's just, that there is still no KitKat available, so a CM jbbl version would be needed.
I suppose you can - just have to have some confirmation so you can be sure you won't brick the phone you spent the hard-earned money on.
lem22 said:
I guess you can flash the complete XT905 firmware on the XT907. It did work for me and even the modem does work for GSM (no idea about LTE or CDMA though). It's just, that there is still no KitKat available, so a CM jbbl version would be needed.
Click to expand...
Click to collapse
thanks alot,
is this the version that i should flash? and since im currently running cm 11 on kitkatbootloader does it support downgrade to this stock?
9.8.2Q_SMUIRD-7_SEMEAUnlk_USAXT90501TLSTRAE1019.0R_SMJBLTEAURETAIL_P008_A014_1FF_fb.xml
I don't know about the version number. I was on the first VZW KitKat (*.10) and flashed the latest available Aussie firmware which still is 98.21.7 (Build 9.8.2Q_SMUIRD-7) dated Jan 9, 2013.
As long as you have an unlocked bootloader, you can downgrade to JB. There are just some lines in the XML that have to be removed (GPT, TZ, and maybe something else if it fails - the usual procedure for downgrading).
Here are the official CM11 builds for JB bootloader, most likely there won't be any for CM12.
Edit: I was wrong about CM12 for JBBL. Obviously there will be builds for this older bootloader too.
How to upgrade just the bootloader of a phone?
There is no official 3.4 kernel for RAZR M XT905 (Australian), so i tried to flash fxz of XT907 (.15 version)
I flashed all the files except system,modem and partition. Then I installed KKBL TWRP and it did worked. But it was not letting me install the new KKBL ROMS due to different value return in ro.secure.hardware, so I had to remove this line from updater-script.
The new rom installed and booted, but what showing System UI has stopped working constantly, this was solved by updating the modem as well. But the XT907 modem doesnot supports XT905 properly (very low signal strength, no network registration).
I hit the wall there, anyone else knows the proper way to achieve this? Can we mod the modem or firmware? Or can the Lollipop firmware be compiled for old kernel.? Are sbl1,sbl2,sbl3 only necessary bootloader files. What is the function of other files.
P.S Now BlissPop i sshowing Setup Wizard has stopped working. Any way out?
Well i just installed BlissPop nightly for JBBL and it is working
Yes, the bootloader has to be compatible with the modem and that's why you won't be able to use a JB modem with a KK bootloader in most cases.
But the KitKat rollout for the Aussie XT925 (Razr HD) has just started this week (it's 180.46.127) and since both phones' software is very similar, I guess KitKat for XT905 is just around the corner.
Hello guys, I would like to Unlock my BL and root my device, but I'm afraid that I will be not be able to update to Android 6 by OTA.
So I was looking for some stock firmware or recovery image, in case I need to lock my BL or get back to stock.
I was thinking about Unlock BL, intall TWRP, do a backup, and than root. And case every thing goes wrong, I would need stock recovery so I can lock my BL again.
My device is Brazilan one 2 SIM, and XT1572.
The only site I founded the firmaware is this one http://www.phonandroid.com/forum/fl...-sur-votre-motorola-moto-x-style-t132486.html
and the dowload link is this one: http://www.filefactory.com/file/3jm...LPH23.116-18_cid7_subsidy-DEFAULT_CFC.xml.zip
What do you guys think, should I take the risk?
Thank you!
i just flashed this on my XT1572 style because wifi was broken, and it fixed it, so this looks good for the EU retail version of the style
Is yours 2 SIMcard? Are you rooted?
Thank you
I have a motorola x style European xt1572 mono sim .
These factory image is good for my style x ?
there's no a way to install stock rom for Moto G4 16 gb prime Edition through sideload in recovery mode (adb)?
i had installed nougat update from india and now i'm stuck in recovery mode. So.. i can't send my phone right now to US and i trying to find a way to recover my phone from this
I can't do a downgrade to MM because of nougat.
So, give me some ideas
Somebody could make a backup of their nougat's rom and upload it?
I am in the same boat (mostly because I am a moron, and thought I had unlocked my bootloader when I hadn't).
If anyone sees the amazon prime xt1625 nougat floating around you will be my hero.
lerg96 said:
Somebody could make a backup of their nougat's rom and upload it?
Click to expand...
Click to collapse
You need a TWRP backup of the nougat ROM?
Try to find a thread with the stock AMZ firmware, then install that. Updates will have to be re-installed, but it should unbrick your moto
Hi,
I'm currently having a problem with m N910G Note 4. The baseband version is Unknown. This happened after flashing Norma N7 V12 and different bootloaders and modems for Marshmallow (can't find the G1 BL recommended for the ROM). I had a backup for my Lollipop rooted stock ROM, except data. It has Modem and EFS backed up as well so I restored all.
However, I'm stuck with my phone freezing and rebooting (mainly due to baseband issue). I tried loading different bootloaders and modems available for N910G Lollipop but to no avail.
If anyone knows where I can get the COI1 BL and CP, that'd be great so I can still use my backed up ROM. Else, I might have to stick with upgrading to Marshmallow (since that's the only available free firmware on Sammobile). I'm avoiding upgrading the firmware though due to eMMC issues that mostly occured on Marshmallow.
Thanks,
Vin
Flashed RR 6.0.0 Android 8.1. ROM recognizes the bootloader and modem so no more rebooting. I guess the TouchWiz ROM has to match with the bootloader and modem; else it'd keep on rebooting. I'd have to find the bootloader and modem for Norma N7 though, so I hope someone could still reply here. Thanks a lot XDA peeps!