I followed the XDA
CF auto root method to root my device N9000ZKEINS after downloading the CF auto root file from the website: autoroot.chainfire.eu
after following the procedure ODIN gives FAIL message
Please help with whats wrong!!
Conflict in post you say you have N9000 but have rooted with N900 .
First check you are using the correct root file for your phone .
JJEgan said:
Conflict in post you say you have N9000 but have rooted with N900 .
First check you are using the correct root file for your phone .
Click to expand...
Click to collapse
I mentioned the device info which is on its box..but note 3 settings show the model as N900
[email protected] said:
I mentioned the device info which is on its box..but note 3 settings show the model as N900
Click to expand...
Click to collapse
I think is a clone coz the build N900DDUEBOB1 don't exist on the official firmware releases. You can:
1. Install this APP.
2. Go to MENU and select REFURBISHMENT CHECK.
3. It will tell you if is a clone or original.
Joku1981 said:
I think is a clone coz the build N900DDUEBOB1 don't exist on the official firmware releases. You can:
1. Install thislay.google.com/store/apps/deta
2. Go to MENU and select REFURBISHMENT CHECK.
3. It will tell you if is a clone or original.
Click to expand...
Click to collapse
Its original...
JJEgan said:
Conflict in post you say you have N9000 but have rooted with N900 .
First check you are using the correct root file for your phone .[/Q]
I mentioned the model no from the box but the settings about in note3 shows this
Click to expand...
Click to collapse
[email protected] said:
Conflict in post you say you have N9000 but have rooted with N900 .
First check you are using the correct root file for your phone.
I mentioned the model no from the box but the settings about in note3 shows this
Click to expand...
Click to collapse
1. Dial *#1234# and tell me what appears.
2. Add all the screenshots of PHONE INFO SAMSUNG app.
Joku1981 said:
1. Dial *#1234# and tell me what appears.
2. Add all the screenshots of PHONE INFO SAMSUNG app.
Click to expand...
Click to collapse
.
Here....
It says its a N900 not 9000.
JJEgan said:
It says its a N900 not 9000.
Click to expand...
Click to collapse
Ok bt this is what the box says:
Csn you please tell me any solution? I suppose the file was right..which I downloaded
From Play store download and run Phone Info post results .
JJEgan said:
From Play store download and run Phone Info post results .
Click to expand...
Click to collapse
I have posted screnshots from phone info above....5 screenshots pls see
[email protected] said:
I have posted screnshots from phone info above....5 screenshots pls see
Click to expand...
Click to collapse
1. Flash THIS firmware via ODIN.
2. Dial *#1234# when the boot process finish.
3. Reflash that firmware again if not appears this on step 2:
AP: N900XXUEBOC4
CP: N900XXUEBOC4
CSC: N900ODDEBOB2
* The SM-N9000ZKEINS is only the name of the device make for INDIA. But your device still being a SM-N900. Take a look: HERE
Joku1981 said:
1. Flash THIS firmware via ODIN.
2. Dial *#1234# when the boot process finish.
3. Reflash that firmware again if not appears this on step 2:
AP: N900XXUEBOC4
CP: N900XXUEBOC4
CSC: N900ODDEBOB2
* The SM-N9000ZKEINS is only the name of the device make for INDIA. But your device still being a SM-N900. Take a look: HERE
Click to expand...
Click to collapse
i am new to root process and pretty apprehensive after that last fail....are there any chances that this could brick my phone ??? flashing means installing?
[email protected] said:
i am new to root process and pretty apprehensive after that last fail....are there any chances that this could brick my phone ? flashing means installing?
Click to expand...
Click to collapse
Brick one SAMSUNG is very very difficult. I let u one GUIDE updated for avoid problems anyway.
Joku1981 said:
Brick one SAMSUNG is very very difficult. I let u one GUIDE updated for avoid problems anyway.
Click to expand...
Click to collapse
sorry to bother you much but what if the file you gave me is wrong and it gets installed....will it Brick my phone?
Joku1981 said:
1. Flash THIS firmware via ODIN.
2. Dial *#1234# when the boot process finish.
3. Reflash that firmware again if not appears this on step 2:
AP: N900XXUEBOC4
CP: N900XXUEBOC4
CSC: N900ODDEBOB2
* The SM-N9000ZKEINS is only the name of the device make for INDIA. But your device still being a SM-N900. Take a look: HERE
Click to expand...
Click to collapse
the PDA version is different from what My phone has!!...I found my PDA CSC version but that is not being able to download...different firmware wud damage..isnt it ?
[email protected] said:
the PDA version is different from what My phone has!!...I found my PDA CSC version but that is not being able to download...different firmware wud damage..isnt it ?
Click to expand...
Click to collapse
Be relaxed coz you can flash what I was telling you without issues. Your PDA is different coz you or other person tried to flash other firmware different (I supose the firmware with the CSC: INU (India) that use N900XXUEBOD1). But your CSC is INS. The root process don't work coz your device have different PDA, Baseband and CSC and only you can solve it matching them with the process exposed above.
Joku1981 said:
Be relaxed coz you can flash what I was telling you without issues. Your PDA is different coz you or other person tried to flash other firmware different (I supose the firmware with the CSC: INU (India) that use N900XXUEBOD1). But your CSC is INS. The root process don't work coz your device have different PDA, Baseband and CSC and only you can solve it matching them with the process exposed above.
Click to expand...
Click to collapse
Well I will try soon...can you tell me how to remove the water mark ORANGE? my phone fell into water but dried under sun it works perfect!!! but the orange dot appears in the back base...any help into it?
Related
Hi all,
I tried to update firmware of my GS4 using Odin (3.09) and an official Samsung S4 firmware 4.4.2 downloaded from SamMobiles. I've never had problem with this procedure... till today! The phone was on 4.3 Stock without any rooting or modification...
The flash procedure failed during flashing of system.ext4.gz file.
If I reboot the phone it says "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again". Kies is unable to do anything: "GT-I9505 does not support initialisation".
If I put the phone in download mode I see:
ODIN MODE (in RED)
PRODUCT NAME: GT-I9505
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOiD: 0x0
CSB-CONFIG-LSB:0x30
WRITE PROTECTION: Enable (in GRAY)
eMMC BURST MODE enabled (in GRAY)
No further flash is possible... I mean that Odin repeatedly fail at the same point.
I please ask someone to help me providing some procedure to recover my phone or a pointer to a web page explaining it... :crying:
thank you
Alvise
1. Take a look if u have the correct drivers installed
2. Tell me if your phone is locked or unlocked
3. Attach one screenshot of the ODIN error pls
Joku1981 said:
1. Take a look if u have the correct drivers installed
Click to expand...
Click to collapse
Do you mean the USB driver in Windows ? I've Windows 8 x64, and I've installed Kies 3. I supposed that Kies installed the correct drivers, in fact Odin could correctly recognize the phone.
Joku1981 said:
2. Tell me if your phone is locked or unlocked
Click to expand...
Click to collapse
The phone is (or I should say was...) totally STOCK.
Joku1981 said:
3. Attach one screenshot of the ODIN error pls
Click to expand...
Click to collapse
... they prevent the insertion of link in this page (I'm still too "noob")...
Guess it from the following pieces: http :// goo.gl /9dW780
What firmware u tried to flash?
Joku1981 said:
What firmware u tried to flash?
Click to expand...
Click to collapse
I9505XXUFNC4_I9505OXXFNC3_I9505XXUFNC4_HOME
Got from SamMobile... is that wrong ? it is one of the few "nobrand"... and I've a nobrand phone. It can be the cause of my problem ? How can I choose the correct firmware ?
many thanks for your help
Alvise
pippo7216 said:
I9505XXUFNC4_I9505OXXFNC3_I9505XXUFNC4_HOME
Got from SamMobile... is that wrong ? it is one of the few "nobrand"... and I've a nobrand phone. It can be the cause of my problem ? How can I choose the correct firmware ?
many thanks for your help
Alvise
Click to expand...
Click to collapse
Region of the phone? What country are u from?
Joku1981 said:
Region of the phone? What country are u from?
Click to expand...
Click to collapse
I'm from Italy, but I think it is not an "italian" device. the CSC was marked as (SMI) before the brick... Now unfortunately I can't boot it anymore and can't tell you further info about hardware and software...
Do you think I can get more info from serial number or other text written under the battery ?
Alvise
pippo7216 said:
I'm from Italy, but I think it is not an "italian" device. the CSC was marked as (SMI) before the brick... Now unfortunately I can't boot it anymore and can't tell you further info about hardware and software...
Do you think I can get more info from serial number or other text written under the battery ?
Alvise
Click to expand...
Click to collapse
keep retrying
Odin troubleshooting: If Odin accidentally gives you "fail" try the following:
- Repeat procedure.
- Make sure that all actions of Kies are disabled from task manager.
- Change usb port.
- Try another usb cable (make sure it is the original).
- Try another Odin version.
- Uninstall and re-install driver.
- Use pit file.
- Try another computer.
Click to expand...
Click to collapse
pippo7216 said:
I'm from Italy, but I think it is not an "italian" device. the CSC was marked as (SMI) before the brick... Now unfortunately I can't boot it anymore and can't tell you further info about hardware and software...
Do you think I can get more info from serial number or other text written under the battery ?
Alvise
Click to expand...
Click to collapse
SMI dont exist.... maybe SMO (serbia) or SMA (philipines)
Joku1981 said:
Region of the phone? What country are u from?
Click to expand...
Click to collapse
I forgot to ask you: where I can get the correct usb drivers from ? Can I trust the driver installed by Kies3 ?
thanks,
Alvise
Joku1981 said:
SMI dont exist.... maybe SMO (serbia) or SMA (philipines)
Click to expand...
Click to collapse
Resolved!
Moved to "virgin" Windows 8 64bit platform, installed only USB Samsung drivers (without installing Kies3).
Flashing has gone smoothly and now the phone is on 4.4.2 !
thank you for your support !
Alvise
pippo7216 said:
Resolved!
Moved to "virgin" Windows 8 64bit platform, installed only USB Samsung drivers (without installing Kies3).
Flashing has gone smoothly and now the phone is on 4.4.2 !
thank you for your support !
Alvise
Click to expand...
Click to collapse
Remember: Press THANKS button for avoid new posts. Im happy ur phone is working again :highfive:
Joku1981 said:
Remember: Press THANKS button for avoid new posts. Im happy ur phone is working again :highfive:
Click to expand...
Click to collapse
Done
Do you know if the new firmware (4.4.2) for GS4 can be rooted ? I read somewhere that the new bootloader can create problems...
pippo7216 said:
Done
Do you know if the new firmware (4.4.2) for GS4 can be rooted ? I read somewhere that the new bootloader can create problems...
Click to expand...
Click to collapse
Im using 4.4.2 and im rooted. I havent any problem using CF-Auto-Root :good:
thus
Joku1981 said:
Im using 4.4.2 and im rooted. I havent any problem using CF-Auto-Root :good:
Click to expand...
Click to collapse
indeed... it works
Now, they talk about triangle away... should I absolutely install it ?
Hi I recently updated my i9505 to 4.4.2.
The baseband version displayed on my phone is i9505XXUFNB3 but having read around varies sites it seems like XXUFNB3 is associated with i9500 and XXUFNB8 is associated with i9505.
Should I be concerned? If so, is there any "solution" to this?
Thanks in advance
Dial *#1234# in ur phone and paste what appears for confirm it :fingers-crossed:
Joku1981 said:
Dial *#1234# in ur phone and paste what appears for confirm it :fingers-crossed:
Click to expand...
Click to collapse
there appears to be 3 sets of numbers and they all start with i9505 and end with FNB3
post a screenshot for him
RubbaBand said:
post a screenshot for him
Click to expand...
Click to collapse
I am not sure if i should censor another letters out but it says the following:
AP: I9505XXUFNB3
CP: I9505XXUFNB3
CSC: I9505XXXFNB3
nelsonchan27 said:
I am not sure if i should censor another letters out but it says the following:
AP: I9505XXUFNB3
CP: I9505XXUFNB3
CSC: I9505XXXFNB3
Click to expand...
Click to collapse
I think you have a beatiful clone coz I9505XXUFNB3 don't exist in Samsung's firmwares, only I9500XXUFNB3.
Joku1981 said:
I think you have a beatiful clone coz I9505XXUFNB3 don't exist in Samsung's firmwares, only I9500XXUFNB3.
Click to expand...
Click to collapse
**** so I should be worried, how do I fix this?
check if your phone is original by downloading this app
https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo
then go to Refurbishment Check
RubbaBand said:
check if your phone is original by downloading this app
https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo
then go to Refurbishment Check
Click to expand...
Click to collapse
Thanks all, false alarm, my phone is indeed original and after some more googling I found that i9505XXUFNB3 does exist
then enjoy your phone
nelsonchan27 said:
Thanks all, false alarm, my phone is indeed original and after some more googling I found that i9505XXUFNB3 does exist
Click to expand...
Click to collapse
1. Don't lie the people.
2. The unique thing you found in GOOGLE is your own thread in XDA :laugh:
3. i9505XXUFNB3 DON'T EXIST IN SAMSUNG'S ORIGINAL FIRMWARES. You have a fake clone device if it use that firmware.
4. Anyway, enjoy ur "clone".
hello guys,
I have galaxy n9005 but it has a weird problem, it has a baseband version N900LKLUENA8 and i tried so hard to install another official firmware n9005 with odin but i couldn't and i don't know what to do?can u help me plz?
note: i have knox 0*1
cooldoctor said:
hello guys,
I have galaxy n9005 but it has a weird problem, it has a baseband version N900LKLUENA8 and i tried so hard to install another official firmware n9005 with odin but i couldn't and i don't know what to do?can u help me plz?
note: i have knox 0*1
Click to expand...
Click to collapse
1. Install Kies 3 and conect your phone to the pc.
2. Take a look your CSC (pic attached)
3. Go to Sammobile.com and download the correct firmware (with correct CSC) for your device.
4. Flash this firmware through ODIN.
5. Enjoy :highfive:
I checked for similar csc at sammobile but i didn't find my csc (xxx)
PDA:NB1 / PHONE:NA8 / CSC:NB1 (XXX)
cooldoctor said:
I checked for similar csc at sammobile but i didn't find my csc (xxx)
PDA:NB1 / PHONE:NA8 / CSC:NB1 (XXX)
Click to expand...
Click to collapse
Anyway reboot to recovery(Vol up +home +power) and you will find....... Csc applied successfully
Give me details which csc it applies in recovery.
:fingers-crossed:: I hope you have a EFS backup :highfive:
Joku1981 said:
Anyway reboot to recovery(Vol up +home +power) and you will find....... Csc applied successfully
Give me details which csc it applies in recovery.
:fingers-crossed:: I hope you have a EFS backup :highfive:
Click to expand...
Click to collapse
I got this Screen
cooldoctor said:
I got this Screen
Click to expand...
Click to collapse
You don't own a SM-N9005. SM-N900L don't exist in Samsung and you own a clone. Im sorry but can't help you
ooooops are you sure ? It works perfectly
cooldoctor said:
ooooops are you sure ? It works perfectly
Click to expand...
Click to collapse
Lucky you. But you don't gona receive OTA updates and the firmwares for SM-N9005 aren't good for you either.
This is from about device
Joku1981 said:
You don't own a SM-N9005. SM-N900L don't exist in Samsung and you own a clone. Im sorry but can't help you
Click to expand...
Click to collapse
Samsung disagrees with you...
http://m.samsung.com/sec/consumer/mobile-phone/mobile-phone/lgt/SM-N900LZKELUC
Sent from my SM-N9005 using Tapatalk 2
ShadowLea said:
Samsung disagrees with you...
http://m.samsung.com/sec/consumer/mobile-phone/mobile-phone/lgt/SM-N900LZKELUC
Sent from my SM-N9005 using Tapatalk 2
Click to expand...
Click to collapse
You mean that is not a clone!!!
ShadowLea said:
Samsung disagrees with you...
http://m.samsung.com/sec/consumer/mobile-phone/mobile-phone/lgt/SM-N900LZKELUC
Sent from my SM-N9005 using Tapatalk 2
Click to expand...
Click to collapse
Yep you are right. I confused the model. Im sorry :highfive:. It's not a clone but is a Korean version.
* There's the latest firmware for your device: HERE. Be sure u translate it before u Download, because all in Korean words.
cooldoctor said:
You mean that is not a clone!!!
Click to expand...
Click to collapse
Nope, it's legit. It's the South Korean LTE-A version.
Joku1981 said:
Yep you are right. I confused the model. Im sorry :highfive:. It's not a clone but is a Korean version.
Click to expand...
Click to collapse
:highfive:
There are so many different versions that it's a miracle that we can keep them apart at all.
Sent from my SM-N9005 using Tapatalk 2
Joku1981 said:
Yep you are right. I confused the model. Im sorry :highfive:. It's not a clone but is a Korean version.
* There's the latest firmware for your device: HERE. Be sure u translate it before u Download, because all in Korean words.
Click to expand...
Click to collapse
Thx for your help. But can i install this firmware normally without odin bootloop and how can i remove the korean language?
cooldoctor said:
Thx for your help. But can i install this firmware normally without odin bootloop and how can i remove the korean language?
Click to expand...
Click to collapse
1. Well. I dont have so much info about this model coz only was released for Korea. Im not Korean and I don't know Korean Language. (I was taking the info of HERE). I supose ODIN will work perfect with that correct firmware but I don't own this device and I can't make tests.
2. You can't remove Korean language.
Joku1981 said:
1. Well. I dont have so much info about this model coz only was released for Korea. Im not Korean and I don't know Korean Language. (I was taking the info of HERE)
2. You can't remove Korean language.
Click to expand...
Click to collapse
I'm sorry for being annoying but i have another question. Can i install official firmware with knox 0*1 and what is the suitable odin version?
Thx in advance
cooldoctor said:
I'm sorry for being annoying but i have another question. Can i install official firmware with knox 0*1 and what is the suitable odin version?
Thx in advance
Click to expand...
Click to collapse
1. You can ofc.
2. Use the last one: HERE
3. Dial *#1234# when you finish of flash the firmware for verify all is correct.
4. Verify, under the battery, if this N900L is the correct MODEL. (Pic attached)
cooldoctor said:
hello guys,
I have galaxy n9005 but it has a weird problem, it has a baseband version N900LKLUENA8 and i tried so hard to install another official firmware n9005 with odin but i couldn't and i don't know what to do?can u help me plz?
note: i have knox 0*1
Click to expand...
Click to collapse
It looks like you have the N900L model but it has been flashed with the N9005 rom.
Your baseband and bootloader should be preserved, I think.
You can check with the Phone INFO ★Samsung★ app, in the FIRMWARE INFO section.
Also check the Hardware revision in the MISC INFO section to see if it is N900L ?
Joku1981 said:
1. You can ofc.
2. Use the last one: HERE
3. Dial *#1234# when you finish of flash the firmware for verify all is correct.
4. Verify, under the battery, if this N900L is the correct MODEL. (Pic attached)
Click to expand...
Click to collapse
With dialing i found
Ap n9005ZHUENB1
CP N900LKLUENA8
Under the battery sm n9005
vndnguyen said:
It looks like you have the N900L model but it has been flashed with the N9005 rom.
Your baseband and bootloader should be preserved, I think.
You can check with the Phone INFO ★Samsung★ app, in the FIRMWARE INFO section.
Also check the Hardware revision in the MISC INFO section to see if it is N900L ?
Click to expand...
Click to collapse
Firmware info
Bootloader N900LKLUENAA
Baseband N900LKLUENA8
Pda N9005ZHUENB1
Misc info
Hardware N900.08
Anyone who can make me a flashable zip of NK1 modem for N900L or guide me in the right direction? I flashed an old version of Modem on my Note 3 (Korean Version) and now cant get any signals. I tried a couple of Korean sites but could not understand the language. google translate is not much helping either and now I am stuck with an expensive video player only . I tried to odine flash modem file for N9005 (having the same hardware features) but always end up with a "fail" message during writing.
Any help please??
zetrixNoob said:
Anyone who can make me a flashable zip of NK1 modem for N900L or guide me in the right direction? I flashed an old version of Modem on my Note 3 (Korean Version) and now cant get any signals. I tried a couple of Korean sites but could not understand the language. google translate is not much helping either and now I am stuck with an expensive video player only . I tried to odine flash modem file for N9005 (having the same hardware features) but always end up with a "fail" message during writing.
Any help please??
Click to expand...
Click to collapse
I found the latest firmware for your device. You only have to reflash via ODIN. It will help you maybe: HERE. It's always better than only a modem.
Joku1981 said:
I found the latest firmware for your device. You only have to reflash via ODIN. It will help you maybe: HERE. It's always better than only a modem.
Click to expand...
Click to collapse
Thanks dude. I will try it out and report it back here. lets see what happens. btw I already have NG5 baseband version right now and the firmware seems to have the same.
zetrixNoob said:
Thanks dude. I will try it out and report it back here. lets see what happens. btw I already have NG5 baseband version right now and the firmware seems to have the same.
Click to expand...
Click to collapse
Anyway NK1 modem for your device model don't exist. Take a look: HERE
Joku1981 said:
Anyway NK1 modem for your device model don't exist. Take a look: HERE
Click to expand...
Click to collapse
NK1
Cant I just flash NK1 modem for another variant like N9005? I am asking this because I saw a guy who had NK1 modem installed and was working fine on my network. I did ask him but he told me it was installed when he got the phone of the local market. the phone was running on a custom rom (Omega v13). I checked the Omega thread but It does not have modem file that means the modem file was separately flashed. I tried flashing N9005 Modem (NK1 has been released for that model) via odin but always end up with a write error. Is there any way around or can i flash it via recovery?
zetrixNoob said:
NK1
Cant I just flash NK1 modem for another variant like N9005? I am asking this because I saw a guy who had NK1 modem installed and was working fine on my network. I did ask him but he told me it was installed when he got the phone of the local market. the phone was running on a custom rom (Omega v13). I checked the Omega thread but It does not have modem file that means the modem file was separately flashed. I tried flashing N9005 Modem (NK1 has been released for that model) via odin but always end up with a write error. Is there any way around or can i flash it via recovery?
Click to expand...
Click to collapse
No modem works better than the one created for the original firmware.
Joku1981 said:
No modem works better than the one created for the original firmware.
Click to expand...
Click to collapse
May be you are right but i still want to try one out.
P.S: I just odin the firmware you suggested but still no signals
zetrixNoob said:
May be you are right but i still want to try one out.
P.S: I just odin the firmware you suggested but still no signals
Click to expand...
Click to collapse
Dial *#1234#and tell me what appears.
Joku1981 said:
Dial *#1234#and tell me what appears.
Click to expand...
Click to collapse
AP: N900LKLUFNG7
CP: N900LKLUFNG5
CSC: N900LLGTFNG7
I am from Pakistan if that helps you in any way.
zetrixNoob said:
AP: N900LKLUFNG7
CP: N900LKLUFNG5
CSC: N900LLGTFNG7
I am from Pakistan if that helps you in any way.
Click to expand...
Click to collapse
Make a factory reset -> Go to Settings > Backup & Restore and have a good read. You'll see your stock backup and restore options from Google but I highly recommend using another backup option on top of these (you can find more options in the link at the bottom of the ''Backup first'' section above). You simply tap the Factory Data Reset option and read the warning text, then hit ''Reset Device'' once you're ready. Your device will reboot and wipe itself clean. If only the dirty dishes were that easy.
Joku1981 said:
Make a factory reset -> Go to Settings > Backup & Restore and have a good read. You'll see your stock backup and restore options from Google but I highly recommend using another backup option on top of these (you can find more options in the link at the bottom of the ''Backup first'' section above). You simply tap the Factory Data Reset option and read the warning text, then hit ''Reset Device'' once you're ready. Your device will reboot and wipe itself clean. If only the dirty dishes were that easy.
Click to expand...
Click to collapse
I tried resetting a number of times before but it wont help. The only thing that might help is a suitable modem and i wont find it anywhere
Anyway thanks for all the help bro.
Joku1981 said:
Anyway NK1 modem for your device model don't exist. Take a look: HERE
Click to expand...
Click to collapse
I just found NK1 firmware for my model but the problem is that the site is in korean and need registration to download. Google translate is not helping much. you can see the website here
Any suggestion?
Please help me,, i have a samsung galaxy s5 neo (g903f). But, imei null, wifi not working, and baseband unknown... How i can fix it?
Sorry for my bad english
1. Remove that cancer (emoji)
2. Remove your IMEI from the post
3. Sammobile is where you download firmwares from. It does not matter what country, because G9xxF is intended for European market.
4. Go to IMEI.info, input your IMEI and you'll see a green Warranty button right under the image of the phone, on the right side of the page. Here you input your Serial Number (SN) and it'll say where it was made. Most likely Vietnam.
西村大一 said:
1. Remove that cancer (emoji)
2. Remove your IMEI from the post
3. Sammobile is where you download firmwares from. It does not matter what country, because G9xxF is intended for European market.
4. Go to IMEI.info, input your IMEI and you'll see a green Warranty button right under the image of the phone, on the right side of the page. Here you input your Serial Number (SN) and it'll say where it was made. Most likely Vietnam.
Click to expand...
Click to collapse
thanks sir,,i check it..and yes right..my phone made in vietnam..
can you help me how to fix imei null, baseband unknown and wifi not working ?
Umar_ms said:
thanks sir,,i check it..and yes right..my phone made in vietnam..
can you help me how to fix imei null, baseband unknown and wifi not working ?
Click to expand...
Click to collapse
Rewrite firmware. Try and see if it helps. Otherwise, to a repair shop with it. What did you do to damage it?
西村大一 said:
Rewrite firmware. Try and see if it helps. Otherwise, to a repair shop with it. What did you do to damage it?
Click to expand...
Click to collapse
oke sir..thanks very much.. i will try it..
i don't know.. actually, it is not my phone. but, my friend's phone..he ask me to help fix it. and now, i'm confused -_-
johngr77 said:
flash a latest version on it and check if baseband comes back, otherwise you may have efs problems or hardware problem
Click to expand...
Click to collapse
thanks very much sir,, i will try it..
by the way, if i flash my phone, what files should be needed?
johngr77 said:
you need odin and firmware for your model
Click to expand...
Click to collapse
i'm search in google..and i find..but the firmware is many region..like region uk..netherland..germany etc..so i'm confused to choose a compatible for my phone..
johngr77 said:
you can flash any region if is for same model as you have, here you have a fast link for BTU CSC (united kingdom) Android 6.0.1 for G903F model: https://drive.google.com/file/d/0B29vwFamwQOWTmNLQVFuVlVfS2s/view
Click to expand...
Click to collapse
thanks very much sir..how to flash it? with odin? or samsung tool pro?
Sent from my SM-J110H using XDA-Developers Legacy app
johngr77 said:
with odin
Click to expand...
Click to collapse
Oke..thanks sir..i will try it..i hope my imei come back