[Q] Galaxy S4 (i9505) bricked - Galaxy S 4 Q&A, Help & Troubleshooting

Hi all,
I tried to update firmware of my GS4 using Odin (3.09) and an official Samsung S4 firmware 4.4.2 downloaded from SamMobiles. I've never had problem with this procedure... till today! The phone was on 4.3 Stock without any rooting or modification...
The flash procedure failed during flashing of system.ext4.gz file.
If I reboot the phone it says "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again". Kies is unable to do anything: "GT-I9505 does not support initialisation".
If I put the phone in download mode I see:
ODIN MODE (in RED)
PRODUCT NAME: GT-I9505
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOiD: 0x0
CSB-CONFIG-LSB:0x30
WRITE PROTECTION: Enable (in GRAY)
eMMC BURST MODE enabled (in GRAY)
No further flash is possible... I mean that Odin repeatedly fail at the same point.
I please ask someone to help me providing some procedure to recover my phone or a pointer to a web page explaining it... :crying:
thank you
Alvise

1. Take a look if u have the correct drivers installed
2. Tell me if your phone is locked or unlocked
3. Attach one screenshot of the ODIN error pls

Joku1981 said:
1. Take a look if u have the correct drivers installed
Click to expand...
Click to collapse
Do you mean the USB driver in Windows ? I've Windows 8 x64, and I've installed Kies 3. I supposed that Kies installed the correct drivers, in fact Odin could correctly recognize the phone.
Joku1981 said:
2. Tell me if your phone is locked or unlocked
Click to expand...
Click to collapse
The phone is (or I should say was...) totally STOCK.
Joku1981 said:
3. Attach one screenshot of the ODIN error pls
Click to expand...
Click to collapse
... they prevent the insertion of link in this page (I'm still too "noob")...
Guess it from the following pieces: http :// goo.gl /9dW780

What firmware u tried to flash?

Joku1981 said:
What firmware u tried to flash?
Click to expand...
Click to collapse
I9505XXUFNC4_I9505OXXFNC3_I9505XXUFNC4_HOME
Got from SamMobile... is that wrong ? it is one of the few "nobrand"... and I've a nobrand phone. It can be the cause of my problem ? How can I choose the correct firmware ?
many thanks for your help
Alvise

pippo7216 said:
I9505XXUFNC4_I9505OXXFNC3_I9505XXUFNC4_HOME
Got from SamMobile... is that wrong ? it is one of the few "nobrand"... and I've a nobrand phone. It can be the cause of my problem ? How can I choose the correct firmware ?
many thanks for your help
Alvise
Click to expand...
Click to collapse
Region of the phone? What country are u from?

Joku1981 said:
Region of the phone? What country are u from?
Click to expand...
Click to collapse
I'm from Italy, but I think it is not an "italian" device. the CSC was marked as (SMI) before the brick... Now unfortunately I can't boot it anymore and can't tell you further info about hardware and software...
Do you think I can get more info from serial number or other text written under the battery ?
Alvise

pippo7216 said:
I'm from Italy, but I think it is not an "italian" device. the CSC was marked as (SMI) before the brick... Now unfortunately I can't boot it anymore and can't tell you further info about hardware and software...
Do you think I can get more info from serial number or other text written under the battery ?
Alvise
Click to expand...
Click to collapse
keep retrying
Odin troubleshooting: If Odin accidentally gives you "fail" try the following:
- Repeat procedure.
- Make sure that all actions of Kies are disabled from task manager.
- Change usb port.
- Try another usb cable (make sure it is the original).
- Try another Odin version.
- Uninstall and re-install driver.
- Use pit file.
- Try another computer.
Click to expand...
Click to collapse

pippo7216 said:
I'm from Italy, but I think it is not an "italian" device. the CSC was marked as (SMI) before the brick... Now unfortunately I can't boot it anymore and can't tell you further info about hardware and software...
Do you think I can get more info from serial number or other text written under the battery ?
Alvise
Click to expand...
Click to collapse
SMI dont exist.... maybe SMO (serbia) or SMA (philipines)

Joku1981 said:
Region of the phone? What country are u from?
Click to expand...
Click to collapse
I forgot to ask you: where I can get the correct usb drivers from ? Can I trust the driver installed by Kies3 ?
thanks,
Alvise

Joku1981 said:
SMI dont exist.... maybe SMO (serbia) or SMA (philipines)
Click to expand...
Click to collapse
Resolved!
Moved to "virgin" Windows 8 64bit platform, installed only USB Samsung drivers (without installing Kies3).
Flashing has gone smoothly and now the phone is on 4.4.2 !
thank you for your support !
Alvise

pippo7216 said:
Resolved!
Moved to "virgin" Windows 8 64bit platform, installed only USB Samsung drivers (without installing Kies3).
Flashing has gone smoothly and now the phone is on 4.4.2 !
thank you for your support !
Alvise
Click to expand...
Click to collapse
Remember: Press THANKS button for avoid new posts. Im happy ur phone is working again :highfive:

Joku1981 said:
Remember: Press THANKS button for avoid new posts. Im happy ur phone is working again :highfive:
Click to expand...
Click to collapse
Done
Do you know if the new firmware (4.4.2) for GS4 can be rooted ? I read somewhere that the new bootloader can create problems...

pippo7216 said:
Done
Do you know if the new firmware (4.4.2) for GS4 can be rooted ? I read somewhere that the new bootloader can create problems...
Click to expand...
Click to collapse
Im using 4.4.2 and im rooted. I havent any problem using CF-Auto-Root :good:

thus
Joku1981 said:
Im using 4.4.2 and im rooted. I havent any problem using CF-Auto-Root :good:
Click to expand...
Click to collapse
indeed... it works
Now, they talk about triangle away... should I absolutely install it ?

Related

[Help] With Kies 3 does not support initializing.

Greeting all
dear guys I am facing this issue, SM-N9005 does not support initializing.
when I am trying to go back stock firmware through Samsung Kies 3
does any buddy can do for me the helpful!! :crying:
I Tried trying install drivers and re setup kies 3
Note: I did not root or any customization recovery or any mods.
Thank you and best regards. ​
baherkilani said:
Greeting all
dear guys I am facing this issue, SM-N9005 does not support initializing.
when I am trying to go back stock firmware through Samsung Kies 3
does any buddy can do for me the helpful!! :crying:
I Tried trying install drivers and re setup kies 3
Note: I did not root or any customization recovery or any mods.
Thank you and best regards. ​
Click to expand...
Click to collapse
You could try and activate developer opinions and turn on USB debugging it might help
Go to settings, about and tap the build number 5 times that will open developer op
jaythenut said:
You could try and activate developer opinions and turn on USB debugging it might help
Go to settings, about and tap the build number 5 times that will open developer op
Click to expand...
Click to collapse
Thank you for your replay
I'll try & I'll come back
regards.
Sorry ...
but not yet fix
pls help
baherkilani said:
Sorry ...
but not yet fix
pls help
Click to expand...
Click to collapse
what are you trying to do down grade firmware
jaythenut said:
what are you trying to do down grade firmware
Click to expand...
Click to collapse
thank you for your replay
I am trying to rollback stock rom ..
tanks
baherkilani said:
thank you for your replay
I am trying to rollback stock rom ..
tanks
Click to expand...
Click to collapse
you cant sammy wont let you do that anymore
Roll back to stock Firmware ? or roll back the stock firmware aka Downgrade?
If it's downgrade, you cannot.
To go back to stock make sure you have the correct USB drivers installed and KIES should work for you. Or alternatively grab your stock ROM from sammobile and flash it via ODIN.
Just seen you had installed the drivers, Check you have the right version of KIES installed, as there are two options from samsungs site. Or just try ODIN
radicalisto said:
Roll back to stock Firmware ? or roll back the stock firmware aka Downgrade?
If it's downgrade, you cannot.
To go back to stock make sure you have the correct USB drivers installed and KIES should work for you. Or alternatively grab your stock ROM from sammobile and flash it via ODIN.
Just seen you had installed the drivers, Check you have the right version of KIES installed, as there are two options from samsungs site. Or just try ODIN
Click to expand...
Click to collapse
thank you for your replay
if I flash it using ODIN knox counter will not effect?!
thanks
baherkilani said:
thank you for your replay
if I flash it using ODIN knox counter will not effect?!
thanks
Click to expand...
Click to collapse
If using Stock ROM and you haven't already rooted previously then No. If you have rooted then depending on your chosen root method, it may have been tripped.
jaythenut said:
you could try and activate developer opinions and turn on usb debugging it might help
go to settings, about and tap the build number 5 times that will open developer op
Click to expand...
Click to collapse
what ..if phone is dead and facing this issue
You require a service repair for your Note 3 .

Galaxy S4 - No AUDIO

Hi there,
I have a Galaxy s4 i9505 4.4.2
I installed a google edition version and after that:
No audio at all, cannot play video, Audio cannot play, cannot make phonecalls. The screen freezes when I try to call someone. When someone calls me, I can't answer. The screen freezes...
I have tried a lots of roms but nothing seemed to solve the problem.
Any idea? :crying:
Thanks.
gon250 said:
Hi there,
I have a Galaxy s4 i9505 4.4.2
I installed a google edition version and after that:
No audio at all, cannot play video, Audio cannot play, cannot make phonecalls. The screen freezes when I try to call someone. When someone calls me, I can't answer. The screen freezes...
I have tried a lots of roms but nothing seemed to solve the problem.
Any idea? :crying:
Thanks.
Click to expand...
Click to collapse
Dial *#1234# and write it down here Mind booting into download mode to see if its say Knox Warranty void.
Repulsa said:
Dial *#1234# and write it down here Mind booting into download mode to see if its say Knox Warranty void.
Click to expand...
Click to collapse
When I type *#1234#, says Unable to process request.
Knox Warranty void: 0x1
what next?
gon250 said:
When I type *#1234#, says Unable to process request.
Knox Warranty void: 0x1
what next?
Click to expand...
Click to collapse
Please go to Phone setting and about device tell me what is your baseband version. so i can give you the right file
Repulsa said:
Please go to Phone setting and about device tell me what is your baseband version. so i can give you the right file
Click to expand...
Click to collapse
BaseBand Version is I9505XXUEMKF
I have tried with differents roms, I don't know if its relevant or not.
thanks.
gon250 said:
BaseBand Version is I9505XXUEMKF
I have tried with differents roms, I don't know if its relevant or not.
thanks.
Click to expand...
Click to collapse
Please try and download and extract this file then manually turn off your phone and wait atleast 10 sec and press and hold power+Volumedown in order to boot into downloadmode . Open odin and Select Phone/CP and flash the file you extracted (the Tar file) .Please feel free to click the thanks button if you think i help you lol
What odin version??
Thanks.
gon250 said:
What odin version??
Thanks.
Click to expand...
Click to collapse
3.09 or 3.04 works fine for me
Repulsa said:
3.09 or 3.04 works fine for me
Click to expand...
Click to collapse
I didn't get any error in odin everything ok, but still not working.. :crying:
could be the problem the Google edition version that I installed yesterday?
Thanks
gon250 said:
I didn't get any error in odin everything ok, but still not working.. :crying:
could be the problem the Google edition version that I installed yesterday?
Thanks
Click to expand...
Click to collapse
Well then try to flash a stock rom mate or try to flash another custom Rom , make sure to fullwipe , this might solve your issue . :fingercrossed:
Repulsa said:
Well then try to flash a stock rom mate or try to flash another custom Rom , make sure to fullwipe , this might solve your issue . :fingercrossed:
Click to expand...
Click to collapse
ok, I'll try
I'm downloading this I9505XXUFNB9_I9505OXXFNB2_PHE
Thanks
Repulsa said:
Well then try to flash a stock rom mate or try to flash another custom Rom , make sure to fullwipe , this might solve your issue . :fingercrossed:
Click to expand...
Click to collapse
Its not working
Any idea or rom
now im scared to flash my sgs4 i bought it 5 days ago is on mkf baseband i had on my mind to root it later but now im scared :/
You can try but you should Backup first.
I still getting the problem trying to fit it.
--

[Q] Phone bricked. Gti9505

hey everybody,
i tried to root my phone today with cf autoroot : http://forum.xda-developers.com/showthread.php?t=2219803
When i started the proces it said failed...
now when i try to boot my phone it says L Firmware upgrade encountered an issue . please select recovery mode in kies & try again...
how can i fix this?
Tunestwo said:
hey everybody,
i tried to root my phone today with cf autoroot : http://forum.xda-developers.com/showthread.php?t=2219803
When i started the proces it said failed...
now when i try to boot my phone it says L Firmware upgrade encountered an issue . please select recovery mode in kies & try again...
how can i fix this?
Click to expand...
Click to collapse
Reflashing the firmware. Try to use next time Towelroot for root ur device.
Joku1981 said:
Reflashing the firmware. Try to use next time Towelroot for root ur device.
Click to expand...
Click to collapse
Do you where i can download those at a decent speed since that sammobile takes me 3 hours...
Tunestwo said:
Do you where i can download those at a decent speed since that sammobile takes me 3 hours...
Click to expand...
Click to collapse
Tell me what firmware do you need.
Joku1981 said:
Tell me what firmware do you need.
Click to expand...
Click to collapse
Gt-I9505...
netherlands?
Tunestwo said:
Gt-I9505...
netherlands?
Click to expand...
Click to collapse
1. Install and open Kies3.
2. Conect ur phone to ur PC and Kies 3 will tell ya your CSC (country code) with 3 letters (pic attached)
3. Paste me here your CSC for find the correct firmware for ur device.
Joku1981 said:
1. Install and open Kies3.
2. Conect ur phone to ur PC and Kies 3 will tell ya your CSC (country code) with 3 letters (pic attached)
3. Paste me here your CSC for find the correct firmware for ur device.
Click to expand...
Click to collapse
Kies doenst recognize my phone.
Tunestwo said:
Kies doenst recognize my phone.
Click to expand...
Click to collapse
Ops, sorry. I forgot u were without system.
- EDIT: Your phone is branded to one phone company or is unlocked?
Joku1981 said:
Ops, sorry. I forgot u were without system.
- EDIT: Your phone is branded to one phone company or is unlocked?
Click to expand...
Click to collapse
unlocked.
Tunestwo said:
unlocked.
Click to expand...
Click to collapse
Log in and download the firmware for ur device: HERE. Follow the "instructions" in that page for flash the firmware in your device. Good luck :highfive:
Joku1981 said:
Log in and download the firmware for ur device: HERE. Follow the "instructions" in that page for flash the firmware in your device. Good luck :highfive:
Click to expand...
Click to collapse
jeez its going to take a while, but thank you!
I'll update you when im done and tried..
just a small question isnt it possible to just flash something like cm?
Tunestwo said:
jeez its going to take a while, but thank you!
I'll update you when im done and tried..
just a small question isnt it possible to just flash something like cm?
Click to expand...
Click to collapse
Yep. First fix ur phone with the method i posted u. You can do what you want later :highfive:
Joku1981 said:
Yep. First fix ur phone with the method i posted u. You can do what you want later :highfive:
Click to expand...
Click to collapse
Owh okey...
Ty allot man!
Whats up with towerlroot?
is chainfire bad?
Edit
it worked,
but some how towerroot wont work.

[Q] NOTE 3 ROOT Failed....PLEASE HELP!!

I followed the XDA
CF auto root method to root my device N9000ZKEINS after downloading the CF auto root file from the website: autoroot.chainfire.eu
after following the procedure ODIN gives FAIL message
Please help with whats wrong!!
Conflict in post you say you have N9000 but have rooted with N900 .
First check you are using the correct root file for your phone .
JJEgan said:
Conflict in post you say you have N9000 but have rooted with N900 .
First check you are using the correct root file for your phone .
Click to expand...
Click to collapse
I mentioned the device info which is on its box..but note 3 settings show the model as N900
[email protected] said:
I mentioned the device info which is on its box..but note 3 settings show the model as N900
Click to expand...
Click to collapse
I think is a clone coz the build N900DDUEBOB1 don't exist on the official firmware releases. You can:
1. Install this APP.
2. Go to MENU and select REFURBISHMENT CHECK.
3. It will tell you if is a clone or original.
Joku1981 said:
I think is a clone coz the build N900DDUEBOB1 don't exist on the official firmware releases. You can:
1. Install thislay.google.com/store/apps/deta
2. Go to MENU and select REFURBISHMENT CHECK.
3. It will tell you if is a clone or original.
Click to expand...
Click to collapse
Its original...
JJEgan said:
Conflict in post you say you have N9000 but have rooted with N900 .
First check you are using the correct root file for your phone .[/Q]
I mentioned the model no from the box but the settings about in note3 shows this
Click to expand...
Click to collapse
[email protected] said:
Conflict in post you say you have N9000 but have rooted with N900 .
First check you are using the correct root file for your phone.
I mentioned the model no from the box but the settings about in note3 shows this
Click to expand...
Click to collapse
1. Dial *#1234# and tell me what appears.
2. Add all the screenshots of PHONE INFO SAMSUNG app.
Joku1981 said:
1. Dial *#1234# and tell me what appears.
2. Add all the screenshots of PHONE INFO SAMSUNG app.
Click to expand...
Click to collapse
.
Here....
It says its a N900 not 9000.
JJEgan said:
It says its a N900 not 9000.
Click to expand...
Click to collapse
Ok bt this is what the box says:
Csn you please tell me any solution? I suppose the file was right..which I downloaded
From Play store download and run Phone Info post results .
JJEgan said:
From Play store download and run Phone Info post results .
Click to expand...
Click to collapse
I have posted screnshots from phone info above....5 screenshots pls see
[email protected] said:
I have posted screnshots from phone info above....5 screenshots pls see
Click to expand...
Click to collapse
1. Flash THIS firmware via ODIN.
2. Dial *#1234# when the boot process finish.
3. Reflash that firmware again if not appears this on step 2:
AP: N900XXUEBOC4
CP: N900XXUEBOC4
CSC: N900ODDEBOB2
* The SM-N9000ZKEINS is only the name of the device make for INDIA. But your device still being a SM-N900. Take a look: HERE
Joku1981 said:
1. Flash THIS firmware via ODIN.
2. Dial *#1234# when the boot process finish.
3. Reflash that firmware again if not appears this on step 2:
AP: N900XXUEBOC4
CP: N900XXUEBOC4
CSC: N900ODDEBOB2
* The SM-N9000ZKEINS is only the name of the device make for INDIA. But your device still being a SM-N900. Take a look: HERE
Click to expand...
Click to collapse
i am new to root process and pretty apprehensive after that last fail....are there any chances that this could brick my phone ??? flashing means installing?
[email protected] said:
i am new to root process and pretty apprehensive after that last fail....are there any chances that this could brick my phone ? flashing means installing?
Click to expand...
Click to collapse
Brick one SAMSUNG is very very difficult. I let u one GUIDE updated for avoid problems anyway.
Joku1981 said:
Brick one SAMSUNG is very very difficult. I let u one GUIDE updated for avoid problems anyway.
Click to expand...
Click to collapse
sorry to bother you much but what if the file you gave me is wrong and it gets installed....will it Brick my phone?
Joku1981 said:
1. Flash THIS firmware via ODIN.
2. Dial *#1234# when the boot process finish.
3. Reflash that firmware again if not appears this on step 2:
AP: N900XXUEBOC4
CP: N900XXUEBOC4
CSC: N900ODDEBOB2
* The SM-N9000ZKEINS is only the name of the device make for INDIA. But your device still being a SM-N900. Take a look: HERE
Click to expand...
Click to collapse
the PDA version is different from what My phone has!!...I found my PDA CSC version but that is not being able to download...different firmware wud damage..isnt it ?
[email protected] said:
the PDA version is different from what My phone has!!...I found my PDA CSC version but that is not being able to download...different firmware wud damage..isnt it ?
Click to expand...
Click to collapse
Be relaxed coz you can flash what I was telling you without issues. Your PDA is different coz you or other person tried to flash other firmware different (I supose the firmware with the CSC: INU (India) that use N900XXUEBOD1). But your CSC is INS. The root process don't work coz your device have different PDA, Baseband and CSC and only you can solve it matching them with the process exposed above.
Joku1981 said:
Be relaxed coz you can flash what I was telling you without issues. Your PDA is different coz you or other person tried to flash other firmware different (I supose the firmware with the CSC: INU (India) that use N900XXUEBOD1). But your CSC is INS. The root process don't work coz your device have different PDA, Baseband and CSC and only you can solve it matching them with the process exposed above.
Click to expand...
Click to collapse
Well I will try soon...can you tell me how to remove the water mark ORANGE? my phone fell into water but dried under sun it works perfect!!! but the orange dot appears in the back base...any help into it?

Note 3 Help needed ..Help me install any of the Nougat Variants

Ok hopefully someone can help me out with teamviewer .. will gladly compensate for your time.
i got this note 3 which was blacklisted .
had someone help me repair imei
but while doing that he installed the original (?) OS from korea SKT telecom.
now its rebooting and baseband shows unknown. i have sent him messages but no response.
i am hoping to get it running nougat first (lineage or any variety ) will then try and get imei repaired again.
Can anyone with LOTS of experience in this stuff message and help me ?
Sorry if this post is off topic and need to be moved elsewhere.
Thanx all
First flash your stock rom via odin .
JJEgan said:
First flash your stock rom via odin .
Click to expand...
Click to collapse
This is the phone .. can you please let me know which firmware to upload .. the one on it is the only one that works others i have tried fail via odin
Cant seem to put pics here but tinyurl.com/notepic1 and tinyurl.com/notepic2
NarroNarro said:
This is the phone .. can you please let me know which firmware to upload .. the one on it is the only one that works others i have tried fail via odin
Cant seem to put pics here but tinyurl.com/notepic1 and tinyurl.com/notepic2
Click to expand...
Click to collapse
Printed model is : SM-N9005
In about info phone model is : SM-N900S
The real model # can be found by putting the phone into download mode.
audit13 said:
The real model # can be found by putting the phone into download mode.
Click to expand...
Click to collapse
In that case SM-N900S
I recommend flashing the latest stock ROM for the sm-n900s with Odin.
The printed model # sm-n9005 is on the label under the battery?
audit13 said:
I recommend flashing the latest stock ROM for the sm-n900s with Odin.
The printed model # sm-n9005 is on the label under the battery?
Click to expand...
Click to collapse
yes ..
these are the ones i found
https://www.sammobile.com/firmwares/galaxy-note3/SM-N900S/
and only one works on it ..which is the one on the phone right now and it keeps rebooting .. i would like any nougat installed on this now.
Thanx
If the label under the battery says sm-n9005 and download mode says sm-n900s, it appears that you have a "frankenphone" whereby the phone is put together with different parts from different models of the Note 3.
Is this the ROM you tried to flash: https://www.sammobile.com/firmwares/galaxy-note3/SM-N900S/SKT/download/N900SKSU0GPI1/98062/ ?
Did you perform a factory reset after flashing the phone but before booting the phone for the first time?
audit13 said:
If the label under the battery says sm-n9005 and download mode says sm-n900s, it appears that you have a "frankenphone" whereby the phone is put together with different parts from different models of the Note 3.
Is this the ROM you tried to flash: https://www.sammobile.com/firmwares/galaxy-note3/SM-N900S/SKT/download/N900SKSU0GPI1/98062/ ?
Did you perform a factory reset after flashing the phone but before booting the phone for the first time?
Click to expand...
Click to collapse
I did perform factory reset but its 4.4.2 not 5.0
I recommend flashing the latest ROM.
audit13 said:
I recommend flashing the latest ROM.
Click to expand...
Click to collapse
Does it matter which one from the linked list ?
http://updato.com/firmware-archive-select-model?exact=1&q=SM-N900S
i am pretty sure i tried one of these but trying again
I recommend the Sept, 2016 ROM.
audit13 said:
I recommend the Sept, 2016 ROM.
Click to expand...
Click to collapse
Thanx downloading and trying now.
will update when done .. slow connection here in nz
NarroNarro said:
Thanx downloading and trying now.
will update when done .. slow connection here in nz
Click to expand...
Click to collapse
Stuck at system.img.ext4
NarroNarro said:
Thanx downloading and trying now.
will update when done .. slow connection here in nz
Click to expand...
Click to collapse
NarroNarro said:
Stuck at system.img.ext4
Click to expand...
Click to collapse
So looks like only 4.4.2 works on this .. any chance of installing nougat etc ?
NarroNarro said:
So looks like only 4.4.2 works on this .. any chance of installing nougat etc ?
Click to expand...
Click to collapse
Almost gave up and then decided to try one more time .. installed 5.0 guys thanx
Whats next
NarroNarro said:
Almost gave up and then decided to try one more time .. installed 5.0 guys thanx
Whats next
Click to expand...
Click to collapse
Read and learn is next .
If everything works on a stock ROM, you try flashing TWRP using Odin. This will allow you to backup the existing ROM and flash a custom ROM.

Categories

Resources