Hi
I have an I9505 which was at 4.3 by default. I used the CF-Auto-Root-jflte-jfltexx-gti9505.tar to root it and after that i updated it with odin and I9505XXUFNB8_I9505TSIFNB1_I9505XXUFNB8_HOME.tar that i got from sammobile.com .
now I don't know that after updating official rom, i'm rooted or not?!!
I flashed Trwap recovery again. I don't know that can i flash a custome rom now with it or i have to root again? if YES, the CF-Auto-Root-jflte-jfltexx-gti9505.tar will work again with android 4.4.2 or not?
thanks
please guide me.
mahdi87_gh said:
Hi
I have an I9505 which was at 4.3 by default. I used the CF-Auto-Root-jflte-jfltexx-gti9505.tar to root it and after that i updated it with odin and I9505XXUFNB8_I9505TSIFNB1_I9505XXUFNB8_HOME.tar that i got from sammobile.com .
now I don't know that after updating official rom, i'm rooted or not?!!
I flashed Trwap recovery again. I don't know that can i flash a custome rom now with it or i have to root again? if YES, the CF-Auto-Root-jflte-jfltexx-gti9505.tar will work again with android 4.4.2 or not?
thanks
please guide me.
Click to expand...
Click to collapse
There is an app called Root Checker which does what the name says. Usuallly, you can preserve root while upgrading if you got SuperSU Pro and have "Survival Mode" enabled.
You don't need to root for flashing a custom rom. You can just flash from the recovery.
Thanks
I flashed a new rom
I have a S5 with the new Marshmallow update via the Telus network in Canada. I had root for the Lollipop but took it out so I could update without problems. Lo and behold the Marshmallow update went in without a hitch but when I tried to flash TWRP with ODIN it didn't work. Am I missing something or does rooting the Marshmallow update require a new TWRP version? I used TWRP and SUPER SU last time to root Lollipop and al I did was put SUPER SU in a folder and flashed TWRP and then installed SUPER SU with TWRP and I was rooted. I just want the easiest step by step way to root my S5 again with the Marshmallow update. My provider is Telus from Canada.
Which model S5?
Unless MM locked your bootloader, TWRP 3.0.0.0 and SuperSU 2.71 beta are what I used to root MM
ODIN 3.10.7
*Detection* said:
Which model S5?
Unless MM locked your bootloader, TWRP 3.0.0.0 and SuperSU 2.71 beta are what I used to root MM
ODIN 3.10.7
Click to expand...
Click to collapse
SM-G900W8VLU1DPD3 Baseband Version Model #SM-G900W8 Build# MMB29M.G900W8VLU1DPD3 These are all the pertinent numbers. Do you have the steps needed to unlock and then ROOT. I'm not sure if the bootloader is locked. Hopefully you can help me get rooted again.
randyboy99 said:
SM-G900W8VLU1DPD3 Baseband Version Model #SM-G900W8 Build# MMB29M.G900W8VLU1DPD3 These are all the pertinent numbers. Do you have the steps needed to unlock and then ROOT. I'm not sure if the bootloader is locked. Hopefully you can help me get rooted again.
Click to expand...
Click to collapse
Hey do you have the .tar file for the firmware? im looking to update as well
Redbull10927 said:
Hey do you have the .tar file for the firmware? im looking to update as well
Click to expand...
Click to collapse
I wasn't thinking when I first read your post. If you"re looking for the MM Firmware I think I have what you are after. I got it from the S Mobile site, so if the guys don't mind me posting it with this reply here it is. I just tried to upload it and it's too big so if you have a way please tell me how and I'll get it to you. Even zipped it's like 1.2 GB.
randyboy99 said:
I wasn't thinking when I first read your post. If you"re looking for the MM Firmware I think I have what you are after. I got it from the S Mobile site, so if the guys don't mind me posting it with this reply here it is. I just tried to upload it and it's too big so if you have a way please tell me how and I'll get it to you. Even zipped it's like 1.2 GB.
Click to expand...
Click to collapse
I actually updated through Samsung Kies. And re-rooted. Though I haven't found an ASOP ROM that works with the MM bootloader
I have an issue when im trying to root my Samsung Galaxy A3... i Cant Find Same Built Version with mibe on other Threads... so please help me ....
Its some detail of my devices...
Type A3
Sm 300H
Android
5.02 Build
Built in ver
LRX22G.A300HXXS1BPE1
Please help me how to root this.....
Please help..
Try CF Auto Root
DrZoola said:
Please help..
Click to expand...
Click to collapse
BACK UP YOUR FIRST
1. Download your stock rom SM-A300H
2. Download CF-Auto-Root Find SM-A300H 5.0.2
3. Flash CF-Auto-Root via Odin (*.tar.md5)
4. If its work. Your Phone is rooted.
5. Restore Your stock Recovery : Extract recovery.img from stock firmware and make recovery.tar.md5 use this Tooland flash via Odin.
huynhlam said:
BACK UP YOUR FIRST
1. Download your stock rom SM-A300H
2. Download CF-Auto-Root Find SM-A300H 5.0.2
3. Flash CF-Auto-Root via Odin (*.tar.md5)
4. If its work. Your Phone is rooted.
5. Restore Your stock Recovery : Extract recovery.img from stock firmware and make recovery.tar.md5use this Tooland flash via Odin.
Click to expand...
Click to collapse
Is it okay if the cf auto root that on Cf website is diffrent build in version with my device... coz i note that it need same build in version...
DrZoola said:
Is it okay if the cf auto root that on Cf website is diffrent build in version with my device... coz i note that it need same build in version...
Click to expand...
Click to collapse
yes its ok ! CFroot build version it is a stock recovery. That why you need reflash your stock recovery after flash cf-autoroot.
warning
This method will not work anymore if you upgraded to QI5 new bootloader/baseband because it's locked to binery 5 it's impossible to downgrade and dev firmware will fail in odin.
This method will only works with older bootloaders only before QI5
I have successfully downgraded to kitkat after pull my hair for days and unlocked for any sim worldwide if you guys like kitkat like me and wanna unlock your sim network follow these institutions.
1,download developer kitkat firmware and flash via odin 3.10 this firmware is for developers without user apps and its empty but good thing is it will let us downgrade to kitkat bootloader no matter you are on 5.0,5.1 1,6.0.1 just flash.
2,after flash developer firmware dont let phone boot immediately go to download mode and flash twrp recovery.
3,after flash twrp recovery flash sprintxnoteRC2 kitkat rom this will boot flawlessly to kitkat.
4,if you like to try other n910p based kitkat roms go to twrp and backup (boot) thats your kernel of sprint xnote RC2 rom before flash any kitkat rom cuz i donno somehow kernel of sprint xnoteRC2 let boot every rom successfully without any errors.just after flash any rom immediately go to twrp restore and restore (boot) kernel that you made earlier from sprintxnoteRC2 rom.
4,FOR UNLOCKING download SSU APK this will work with kitkat if your phone says INVALID SIM CARD just install as normal APK and open it will ask for root permision PRESS GRANT and unlock then reboot if still your phone dosent get signal bars then go to dialer and dial ##72786# and press YES it will reboot automatically your phone and hopefully you will have signal on gsm sim. if SSU apk method does not work download gt galaxy tools apk and unlock.grant root permission to galaxy tools and open app go down and you'll see UICC unlock just hit and restart device . also you can unlock tethering hotspot permanently from galaxy tools . THATS ALL. I AM SHARING YOU GUYS MY EXPERIENCE I HAVE TESTED THIS METHOD ON MY DEVICE AND i HAVE SUCCESSFULLY UNLOCED MY N910P AND DOWNGRADED FROM 6.0.1 TO KITKAT
DISCLAIMER:- TRY AT YOUR OWN RISK PLEASE YOU MUST BACK UP YOUR EFS AND ANY IMPORTANT DATA BEFORE DO ANYTHING FOLLOW INSTRUCTIONS CAREFULLY AS I HAVE BEEN MENTIONED IN THREAD AND IF ANY QUESTIONS FEEL FREE TO ASK ME. HIT THANKS IF THIS THREAD IS USEFUL FOR YOU.
1. Download developer fimware link.
https://androidfilehost.com/?fid=457095661767098816
2. Download TWRP recovery link
https://mega.nz/#!HUN1nILZ!_7KP4H223nlNAbwx6EIjLLkPxqKXNg_yxjptDbYPwas
3. Download sprintxnoteRC2 rom link
https://mega.nz/#!jdsmEAKa!FH3RvThxgDj_gnxCDgrEAyZi-n3R19RcNmBGJi3Ly7M
4. Download SSU APK LINK
https://mega.nz/#!qVtgzTxK!409cHS7_VuerOqrKg4AnsrskO4nJDbhAtCyf8umaEE8
5. DOWNLOAD GALAXY TOOLS APK LINK
https://mega.nz/#!bElkjZzI!OTtzYjYxsUM8Sf-GP71rHilIXNpWCLIitEgkkx2uJZ8
DOWNLOAD NADIA 4.4 4 CUSTOM KERNEL WORKS ON ALL SNAPDRAGON MODELS N910F/P/T/V
https://mega.nz/#!accnkb6B!f_wdM79WXZ2UYy2El87DXYctihB40MBjV4imBKlhoDo
GUYS I HAVE ALSO FOUND A WAY TO DOWNGRADE N910T TMOBILE NOTE 4 TO KITKAT CHECK THR POST LINK BELOW.
http://forum.xda-developers.com/not...ws-want-to-downgrade-to-4-4-4-kitkat-t3447773
I MADE THIS THREAD SPECIALLY FOR NETWORK LOCKED N910P USERS TO TEMPORORY DOWNGRADE TO UNLOCK NETWORK. BUT IF YOU END UP USING KITKAT ROMS THE FINGERPRINT SENSOR WILL NOT WORK.
FIX FOR FINGERPRINT
Flash og5 5.1.1 bootloader only along with with Nadia 4.4.4 kernel flash in twrp and you get everything working with any kitkat rom.
Or flash 5.1.1 6.0.1 stock firmware the fingerprint will work fine and unlocking will stick permanently
HiT THANKS:good::good::good:
Can I go back to a non-rooted, stock KitKat ROM without tripping KNOX?
Trex888 said:
I have successfully downgraded to kitkat after pull my hair for days and unlocked for any sim worldwide if you guys like kitkat like me and wanna unlock your sim network follow these institutions.
Click to expand...
Click to collapse
Can you Odin any firmware after this?
If so, this is a game changer for kitkat lovers.
You can upgrade again to 5.1.1 & 6.0.1 n910p firmware but you cannot flash n910p official kitkat it will simply fail in odin.you can flash any kitkat n910p roms in twrp recovery with diffrent kernels also i have tested deodexed 4.4.4 n910p based rom and it works flawlessly with custom kernel .i have tested everything every firmware but sadly 4.4.4 n910p fail in odin .
Which kernel is it in that SprintxnoteRC2 rom? Any other kernel working with KitKat?
Ael kernel.
shadowcliffs said:
Which kernel is it in that SprintxnoteRC2 rom? Any other kernel working with KitKat?
Click to expand...
Click to collapse
Ael kernel
how long has this kitkat developer firmware been leaked?
and can't you downgrade to official kitkat from the oldest 5.0.1? most of the "first new OS upgrade" won't block downgrades
6.0.1 --> 4.4.4 dev --> oldest 5.0.1 --> 4.4.4 official
edit:
also, does the dev firmware format internalsd like PB5?
Does the unlocking persist when upgrading to newer firmware?
Returned from PG1 to NK2 ( BoBCaTROM v2.0) following OP's tips. Since the purpose of flashing the dev tar is to update bootloader, I deleted the system file from the tar ball and ended up with a smaller file about 130 MB
download here.
From the attached screenshot we can see, the modem is AOF1, the kernel is AEL 5.5 (which is not shown in the screenshot).
Sterist said:
how long has this kitkat developer firmware been leaked?
and can't you downgrade to official kitkat from the oldest 5.0.1? most of the "first new OS upgrade" won't block downgrades
6.0.1 --> 4.4.4 dev --> oldest 5.0.1 --> 4.4.4 official
edit:
also, does the dev firmware format internalsd like PB5?
Click to expand...
Click to collapse
This dev firmware i found accidently from a Chinese website they use to refurbish and spoof usa models to international models and resale again . I tried to flash official 4.4.4 but it fails in odin.its something to do with this developer firmware that it can let us downgrade to 4.4.4 .anyway you can use this dev firmware to downgrade and flash kitkat custom roms and kernels.
Binary invalid
Trex888 said:
This dev firmware i found accidently from a Chinese website they use to refurbish and spoof usa models to international models and resale again . I tried to flash official 4.4.4 but it fails in odin.its something to do with this developer firmware that it can let us downgrade to 4.4.4 .anyway you can use this dev firmware to downgrade and flash kitkat custom roms and kernels.
Click to expand...
Click to collapse
Dev firmware does not work. Tried downloading with chrome, firefox,opera and straight to the mega app. Odin shows this error message: md5 invalid! Binary is invalid. Have try to download the file 12 time, no luck. Any suggestions or help?.
MexiMax said:
Dev firmware does not work. Tried downloading with chrome, firefox,opera and straight to the mega app. Odin shows this error message: md5 invalid! Binary is invalid. Have try to download the file 12 time, no luck. Any suggestions or help?.
Click to expand...
Click to collapse
Try this one
Thanks. Downloading now, will let you know if it works. Thanks again.
Sterist said:
how long has this kitkat developer firmware been leaked?
and can't you downgrade to official kitkat from the oldest 5.0.1? most of the "first new OS upgrade" won't block downgrades
6.0.1 --> 4.4.4 dev --> oldest 5.0.1 --> 4.4.4 official
edit:
also, does the dev firmware format internalsd like PB5?
Click to expand...
Click to collapse
4.4.4 dev --> oldest 5.0.1 failed : sw rev check fail
Originally Posted by DjeMBeY
SW REV. CHECK FAIL : fused:2, Binary: 1 is when you try to downgrade aboot.mbn (bootloader) or try to flash incorrect system/csc etc..
Click to expand...
Click to collapse
Try this one
Thanks. It did work. Really appreciated your help.
shadowcliffs said:
Try this one
Click to expand...
Click to collapse
The file size is just 120.2 MB??
robinhood1808 said:
The file size is just 120.2 MB??
Click to expand...
Click to collapse
With system partition removed as mentioned in my earlier post. After all, bootloader is all you need.
shadowcliffs said:
With system partition removed as mentioned in my earlier post. After all, bootloader is all you need.
Click to expand...
Click to collapse
Hmmm... After flashing this firmware, without rebooting and going into download mode, one has to flash TWRP & then any Kit-Kat based custom ROM. Got it! :good:
MexiMax said:
Dev firmware does not work. Tried downloading with chrome, firefox,opera and straight to the mega app. Odin shows this error message: md5 invalid! Binary is invalid. Have try to download the file 12 time, no luck. Any suggestions or help?.
Click to expand...
Click to collapse
download file by mega app without pause or stop while downloading.
robinhood1808 said:
Hmmm... After flashing this firmware, without rebooting and going into download mode, one has to flash TWRP & then any Kit-Kat based custom ROM. Got it! :good:
Click to expand...
Click to collapse
flash kitkat rom with ael or any custom kernel otherwise it won't boot.
hello guys who reads me?. i have a serious problem.
recently i flashed my S5 sm g900p to stock android 6.0.1 the phone is from sprint and now i dont have mobile theatering and some simcards do not work since am not from the us..my real problem is that TWRP doesnt work again and am unbale to flash a custom rom like leanage OS its says error updating binary
please help me howto flash a custom rom or how to go back to android 5.0 am a dummy so i need some explanations. thanks in advance
mukongharrison said:
hello guys who reads me?. i have a serious problem.
recently i flashed my S5 sm g900p to stock android 6.0.1 the phone is from sprint and now i dont have mobile theatering and some simcards do not work since am not from the us..my real problem is that TWRP doesnt work again and am unbale to flash a custom rom like leanage OS its says error updating binary
please help me howto flash a custom rom or how to go back to android 5.0 am a dummy so i need some explanations. thanks in advance
Click to expand...
Click to collapse
I presume it's an unlocked phone (works on any network)
You can try manually add apn settings
Flash a different firmware via odin
In regards to twrp and custom rom make sure are flashing correct versions
TWRP latest version is twrp-3.2.3-0-klte.img.tar
https://dl.twrp.me/klte/
Flash twrp.tar in odin in AP section
LineageOS
https://download.lineageos.org/kltedv
In twrp format system data cache
Flash rom zip
Flash gapps (mind the gapps)
Flash root zip (magisk optional)
Restart