Related
Hello,
I have the Tab 4 8.0 LTE with T-Mobile branding ( AP: T335XXU1ANDD CP: T335XXU1ANDD CSC:T335DTM1ANE3) and want to change change to DBT ( DBT-T335XXU1ANDD-20140520101235.zip ) Did anyone successful debranded his Tab 4?? I already debranded my S3 and S5. Is the way how to do it the same?
BlackMonkey said:
Hello,
I have the Tab 4 8.0 LTE with T-Mobile branding ( AP: T335XXU1ANDD CP: T335XXU1ANDD CSC:T335DTM1ANE3) and want to change change to DBT ( DBT-T335XXU1ANDD-20140520101235.zip ) Did anyone successful debranded his Tab 4?? I already debranded my S3 and S5. Is the way how to do it the same?
Click to expand...
Click to collapse
You could try the firmware from here: http://www.samdownloads.de/downloads/sm-t335/
Edit: by the way, you flash with odin as known from your S3 and it´s the version with DBT...
I'm downloading the DBT firmware now with 30kB/s. in 7h is finished
What i wanted to know was if anyone did this already. I dont want to be the first one and run into big problems and kill my Tab that just arrived.
I seriously doubt anyone has done this. What are you trying to achieve?
Sent from my HTC One_M8
i want to get rid of that ugly white boot- and shutdown animation from t-mobile. The t-mobile bloat apps can be uninstalled. Thats good . T-mobile is not my provider so the apps are useless.
I did it just yesterday (got a German 8.0 LTE from T-Mobile) and it worked like a charme using a guide, I cant post links because my account is too new, but you can copy and paste the one below:
Code:
true-android.blogspot.com/2014/05/t335xxu1andd-android-442-kk-firmware.html
After that I used to Towelroot to root the device.
BlackMonkey said:
i want to get rid of that ugly white boot- and shutdown animation from t-mobile. The t-mobile bloat apps can be uninstalled. Thats good . T-mobile is not my provider so the apps are useless.
Click to expand...
Click to collapse
If all you want to do is get rid of the boot and shut down animations just delete or replace them in /system/media/
frailtyy said:
I did it just yesterday (got a German 8.0 LTE from T-Mobile) and it worked like a charme using a guide
Click to expand...
Click to collapse
i did this today and *#1234# is showing CSC:T335DBT1ANE2 but kies and recovery still show DTM.
After flash i did a factory reset and wipe cache. Whats going wrong now??
frailtyy. can you look what csc your kies or recovery shows?
Edit:
thats strange but problem solved. After 1 or 2 new reboots (or one time entering download mode) i have DBT overall
Hi,
I just bought the galaxy note 4 and it came with a custom rom and i want to go back to stock as fingerprint does not work .Attached there is the model number of phone. There is somthing that doesn't make sense the model number finishes with F means its international firmware. The PDA have T means its a t-mobile phone. Ireally dont know which to choose from sam mobile as a firmware. Does the firmware on network will lock your phone on that network? does it will have bloatware? Which firmware to choose? Helpp mee and thanks in advance
mic__vella said:
Hi,
I just bought the galaxy note 4 and it came with a custom rom and i want to go back to stock as fingerprint does not work .Attached there is the model number of phone.
Click to expand...
Click to collapse
Under your battery you will find a label with your model number on it.
I have purchased a used verizon note 3. I install jasminerom 6.1 with flashfire and it works fine out of the box without flashing partial firmware. I want to know is the developer edition or standard edition of note 3. I searched every where but did not get any good info that i can use to check if its note 3 developer edition or my boot loader is unlocked. Please tell me how i can make sure.
Obviously your bootloader is unlocked as you can load root and have permanent rom. Probably not a developer phone, but that is my guess. My old note 3 I through a custom Rom on it w out problem. Pre-lollopop.
Sent from my SM-N910V using Tapatalk
zeeemughal said:
I have purchased a used verizon note 3. I install jasminerom 6.1 with flashfire and it works fine out of the box without flashing partial firmware. I want to know is the developer edition or standard edition of note 3. I searched every where but did not get any good info that i can use to check if its note 3 developer edition or my boot loader is unlocked. Please tell me how i can make sure.
Click to expand...
Click to collapse
Remove the back and battery...if it's a developer edition, it will be engraved on the case under the battery.
Sent from my Note 3 via Tapatalk
Unfortunately there is no sticker. Seller has removed thise. Is there any other way to check. And one more thing is it possible to enable lte band 3 (1800mhz) on verizon note 3. In our country we have only band 3 lte.
zeeemughal said:
Unfortunately there is no sticker. Seller has removed thise. Is there any other way to check. And one more thing is it possible to enable lte band 3 (1800mhz) on verizon note 3. In our country we have only band 3 lte.
Click to expand...
Click to collapse
It's not on a sticker...it is engraved into the case. If it's not there..it is not a developer version.
I have no idea on band 3, certainly you couldn't enable it (if that's possible) unless the phone is rooted.
Changed in edit 6/21/2016: With the bootloader unlock now available.. Converted retail editions will not have the engraving but will still show MODE: Developer when you boot into download (Odin) mode.
Sent from my Note 3 via Tapatalk
zeeemughal said:
I have purchased a used verizon note 3. I install jasminerom 6.1 with flashfire and it works fine out of the box without flashing partial firmware. I want to know is the developer edition or standard edition of note 3. I searched every where but did not get any good info that i can use to check if its note 3 developer edition or my boot loader is unlocked. Please tell me how i can make sure.
Click to expand...
Click to collapse
Boot into download/odin mode. A few lines down it should say "Mode: developer" or something along those lines
Im looking for this firmware. I tried smart switch and is required a serial number. If someone can posted.
Abdiel1224 said:
Im looking for this firmware. I tried smart switch and is required a serial number. If someone can posted.
Click to expand...
Click to collapse
It would be helpful if your subject line include a question mark, so readers would know that you're asking for this firmware rather than offering or announcing it.
https://mega.nz/#!Q4wHFK5A!VC4xMo8-WHE2K73z-ubpK8jUfmjWwyiqoR_BuwxLqTI
Rev 1 Not Rev 2
PH1 vs PHE
dave357 said:
https://mega.nz/#!Q4wHFK5A!VC4xMo8-WHE2K73z-ubpK8jUfmjWwyiqoR_BuwxLqTI
Rev 1 Not Rev 2
Click to expand...
Click to collapse
Isn't this link for PH1 rather than PHE? I checked here: http://samfirm.net/threads/update-safely-firmware-galaxy-note7-all-model-22-09-2016.119/ but they seem to have the PHE ODIN files for every other carrier but not for ATT.
Yes I believe you are correct. All the carriers also are on Revision 2 now as well because of this whole stupid battery BS. So if you update pretty much to any update the likelihood of downgrading is slim to none. I actually have the Sprint Variant exchanged new non explosive model that shipped with PH9 Rev 1. I was able to downgrade to PGC Rev 1 and Root it and then unlock it for any carrier then flashed it to ATT PH1 Rev 1. However I tried going back to Sprint just to see if I could go back to original firmware and it will not let me do it. Odin fails with Sha 256 error. Witb new bootloader and firmware having some Sha 256 check coding attached in it. Only way for me to go back is to flash newer firmware which is Revision 2 and I am trying to avoid going to the new Revision as the last Note 7 Sprint I did that with it broke my unlock carrier and made the device read invalid SIM only good for Sprint. Unfortunately there is no method for unlocking Sprint Note 7 on Revision 2 right now which sucks. So I have one Note 7 stuck to Sprint which I have Att service and 1 Note 7 that I flashed to Att I am currently using now. I'm waiting for a solution for the N930P Rev 2 Firmware to unlock it. Basically need a kernel root to do the unlock unless someone else knows how to do it.
PHE
dave357 said:
Yes I believe you are correct. All the carriers also are on Revision 2 now as well because of this whole stupid battery BS. So if you update pretty much to any update the likelihood of downgrading is slim to none. I actually have the Sprint Variant exchanged new non explosive model that shipped with PH9 Rev 1. I was able to downgrade to PGC Rev 1 and Root it and then unlock it for any carrier then flashed it to ATT PH1 Rev 1. However I tried going back to Sprint just to see if I could go back to original firmware and it will not let me do it. Odin fails with Sha 256 error. Witb new bootloader and firmware having some Sha 256 check coding attached in it. Only way for me to go back is to flash newer firmware which is Revision 2 and I am trying to avoid going to the new Revision as the last Note 7 Sprint I did that with it broke my unlock carrier and made the device read invalid SIM only good for Sprint. Unfortunately there is no method for unlocking Sprint Note 7 on Revision 2 right now which sucks. So I have one Note 7 stuck to Sprint which I have Att service and 1 Note 7 that I flashed to Att I am currently using now. I'm waiting for a solution for the N930P Rev 2 Firmware to unlock it. Basically need a kernel root to do the unlock unless someone else knows how to do it.
Click to expand...
Click to collapse
Wow! I was saw a few SHA 256 errors which I got around using the modified ODIN. I have 2 Verizon Branded Note 7s hated and still hate the Verizonized settings (no Device Maintenance in settings menu in addition to burying the Samsung Cloud and making you download Samsung Pay). So before the I flashed the ATT PH1 ODIN and ported back to AT&T (after 13 days with VZW). Just before the Sept 21st exchange explosive device date I ported back to VZW thinking that the exchange would go more smoothly at the VZW store. I unrooted via factory reset, got the new phones and could have escaped the PHE update altogether since I allowed the update myself after going home. Now I want to go back to AT&T again (due to the heavy-handed actions of VZW and VZW's near hostility to Samsung and the Samsung user experience that I mentioned above). Speaking of Sprint, I just flashed the Sprint ODIN PHE files just to check out the Sprint Note 7 interface while I await the ATT Note 7 PHE Odin files. Looks as good as AT&T (if only their coverage was). So I actually paid off both Note 7s so I'm a free agent LOL. Wish I had hung onto my original Note 7s or at least had not taken the PHE update on the replacement phones.
wayne8821212 said:
Isn't this link for PH1 rather than PHE? I checked here: http://samfirm.net/threads/update-safely-firmware-galaxy-note7-all-model-22-09-2016.119/ but they seem to have the PHE ODIN files for every other carrier but not for ATT.
Click to expand...
Click to collapse
Yeah I checked over there and like always nothing for At&t..
ATT Note 7 PHE ODIN
Abdiel1224 said:
Yeah I checked over there and like always nothing for At&t..
Click to expand...
Click to collapse
I have scoured the internet LOL (or so it feels) and I can't find the files AT&T so, at this point, I can't get back to AT&T without them. I guess I could return the Verizon Note 7 s and pay the restocking fees for both $35 X 2, get a refund $1728 minus $70 and go to AT&T and buy new AT&T-branded Note 7s (as long as I do it before next Wednesday the 5th (day 14 with replacement Note 7).
Can you find the firmware downloaded to your pc from smart switch? Just a thought have not tried yet.
ShrekOpher said:
Can you find the firmware downloaded to your pc from smart switch? Just a thought have not tried yet.
Click to expand...
Click to collapse
I tried but it kicks me out bc is not my phone model nor s/n. :crying:
Abdiel1224 said:
I tried but it kicks me out bc is not my phone model nor s/n. :crying:
Click to expand...
Click to collapse
I gave it a go with no luck. The file it downloads is not a complete firmware. And it's stored in a weird format I could open or convert.
ShrekOpher said:
I gave it a go with no luck. The file it downloads is not a complete firmware. And it's stored in a weird format I could open or convert.
Click to expand...
Click to collapse
Can u post a pic of it?
ShrekOpher said:
I gave it a go with no luck. The file it downloads is not a complete firmware. And it's stored in a weird format I could open or convert.
Click to expand...
Click to collapse
I was able to grab the firmware for mine by following this post. I have the Verizon version so I downloaded the Verizon firmware. Someone with the AT&T PHE build should be able to do the same and post it.
http://forum.xda-developers.com/showpost.php?p=68281789&postcount=2
After opening Smart Switch and connecting my phone using the file transfer USB setting on my phone, I clicked on "More" and then "emergency software recovery and initialization." I then selected the "device initialization" tab and followed the steps in smart switch. After it prompted me to restart the phone in recovery mode the file started to download. I made a quick copy of it in another folder as soon as the extension changed to a zip file (around 70 - 75%).
spiceygoat said:
I was able to grab the firmware for mine by following this post. I have the Verizon version so I downloaded the Verizon firmware. Someone with the AT&T PHE build should be able to do the same and post it.
http://forum.xda-developers.com/showpost.php?p=68281789&postcount=2
After opening Smart Switch and connecting my phone using the file transfer USB setting on my phone, I clicked on "More" and then "emergency software recovery and initialization." I then selected the "device initialization" tab and followed the steps in smart switch. After it prompted me to restart the phone in recovery mode the file started to download. I made a quick copy of it in another folder as soon as the extension changed to a zip file (around 70 - 75%).
Click to expand...
Click to collapse
http://forum.a2phone.ir/download-ce...phe_usa-att-android-6-0-1_4file-firmware.html
I was able to extract my firmware last night and put it on my One Drive. Please come to the note7rebels forum to get the full tutorial. We are also looking for ways to help get other firmwares with my method.
Hi, first post here. Installed TWRP and upgraded my wifes phone to LineageOS 16. Most things are working well, but the menu key is constantly activating without a key press. I'm a networking guy by trade and phone fiddling not really my strong point. My Google Fu always seems to fail me in situations like this too.
Any ideas? There's also an issue with Bluetooth which constantly crashes if used. Do I need to raise a new thread for that?
The phone itself is a UK version, so that's also a bit confusing when there's builds offered for AT&T, Sprint, Verizon etc. Also I've not upgraded further past this nightly build. Should I try this? Am I right in that the process should be to wipe only system partition then apply the upgrade?
Cheers.
Oh if you need me to post any further details about phone or whatever just shout and I'll get on it.
Reads as you may have installed for the wrong phone model .
I don't think so. The options presented to me over at download.lineageos.org were;
Galaxy Note 3 LTE (N9005/P) hlte
Galaxy Note 3 LTE (N9008V) hltechn
Galaxy Note 3 LTE (N900K/L/S) hltekor
Galaxy Note 3 LTE (N900T/V/W8) hltetmo
The phone model number is SM-N9005 and so the specific image I installed, after a full backup and full wipe is;
lineage-16.0-20200905-nightly-hlte-signed.zip
Non xda rom suggest you go back to the source .
Is there another rom that anyone could recommend?