Okay, so i purchased a brand new samsung note 3 sm-n9005 from hong kong, and its been running perfectly,
here are some specs
android version= kitkat 4.2.2
baseband version = N9005ZHUENF1
kernel version = 3.4.0-722276
built number =KOT49H.N9005ZHUENF1
so far so good, everything seems legit, but then i wanted to upgrade to lollipop so i downloaded the necessary samsung drivers, kies software, odin 3.09,
and the hong kong version of the lollipop 5.0 firmware "N9005ZSUGOC3"
but soon as i click start
it shows fail
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005ZSUGOC3_N9005OZSGOC3_N9005ZSUGOC3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> aboot.mbn
<ID:0/008> NAND Write Start!!
<ID:0/008> FAIL! (Auth)
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
and as i was inspecting the error on the oden on my phone, i noticed
the product name on my phone is SM-N900A which makes no sense.
to further examine i went to the recovery and it shows
android system recovery <3e>
KOT49H.N900AUCUCNC2
now i am really confused as to what phone i have, the box, documentations, and with in the phone settings everything points to n9005. where as oden and "volume down + power + home" menu shows n900a
and
"volume up + power + home" recovery menu also shows n900a.
what should i do to upgrade to lollipop, what phone do i really have?
What does it say under the battery?
Did you buy from a reliable seller or could it be a knock-off phone?
There's an app on Play you could use - Phone INFO Samsung. DL it and run and see what it tells you.
What is a BOUBOO Note ??? as under system menu .
same isse
i have same issues as yours. dont know what firmware to download
WhateverMan said:
It's a real device, just that the person probably flashed the N9005 firmware on it.
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
It's not brand new then. It's a second hand device.
It's a real device, just that the person probably flashed the N9005 firmware on it.
Sent from my SM-N9005 using Tapatalk
So after a while of trying to flash different roms, turns out, it is a n900a
So after a while of trying to flash different roms, turns out, it is a n900a, it is authentic, its not a fake, everything checks out, but the retailer was from hong kong, and they buy the phones on bulk, so the guy distrubuting the phones, has flashed the n9005 rom on to it,
after flashing the n900a lollipop, the phone has been working as good as it should, i have had no problems whats so ever, it just amazes me as to what lengths people would go to deceive and cheat the customers.
anyways, thank you for your replys, hope you all have an amazing time,
sincerely,
Ali,
PS, boubou is what i called my ex girlfriend, its just an inside joke, and since this phone was just about equally two faced, i gave it a name that would make sense
hey, what ever it says on the recovery is true
kings555 said:
i have same issues as yours. dont know what firmware to download
Click to expand...
Click to collapse
hey, what ever it says on the recovery is true
N900AUCUEOC1_N900AATTEOC1_N900AUCUEOC1_HOME.tar
just flash this,
it is the official android 5.0 lollipop for n900a (atnt). works like a charm, and if you have to, just disable all the atnt apps,
there is no difference other then the fact that it shows a atnt logo on boot.
its an inside joke
JJEgan said:
What is a BOUBOO Note ??? as under system menu .
Click to expand...
Click to collapse
PS, boubou is what i called my ex girlfriend, its just an inside joke, and since this phone was just about equally two faced, i gave it a name that would make sense
hi
urmother93 said:
hey, what ever it says on the recovery is true
N900AUCUEOC1_N900AATTEOC1_N900AUCUEOC1_HOME.tar
just flash this,
it is the official android 5.0 lollipop for n900a (atnt). works like a charm, and if you have to, just disable all the atnt apps,
there is no difference other then the fact that it shows a atnt logo on boot.
Click to expand...
Click to collapse
where did you dload this firmware. im sorry im just noob with these techy stuffs
kings555 said:
where did you dload this firmware. im sorry im just noob with these techy stuffs
Click to expand...
Click to collapse
so i can send you the links, or i can send you a full tutorial i made for my friends to install a custom note 4 rom,
it is the best rom you can have on a n900a. ive been rocking that since.
urmother93 said:
so i can send you the links, or i can send you a full tutorial i made for my friends to install a custom note 4 rom,
it is the best rom you can have on a n900a. ive been rocking that since.
Click to expand...
Click to collapse
You can send me and a tutorial? Sorry ... Google translation
MrYuraB said:
You can send me and a tutorial? Sorry ... Google translation
Click to expand...
Click to collapse
I man... Google translation.... OK: P
MrYuraB said:
You can send me and a tutorial? Sorry ... Google translation
Click to expand...
Click to collapse
mate, i dont think i can attach files here, if you give me your email, id be more then happy to email it to you
kings555 said:
where did you dload this firmware. im sorry im just noob with these techy stuffs
Click to expand...
Click to collapse
no worries mate, my brother is the same,
http://www.sammobile.com/firmwares/database/SM-N900A/
all the official firmware can be found on this website, however lollipop hasnt been officially released for note 3 att (n900a),
i was using this
http://forum.xda-developers.com/not...-dompop-urv2-2-3-tekhd-edition-note4-t3074094
rom on my note 3, its a port from note edge, had amazing bettery life and little to not bugs.
i no longer have the note 3 i upgraded to a note 5.
hope it helps,
if you want, i made a tutorial for my brother, i can send it to you too
Bricked 900A or maybe N9005!!?? Help
I do hope someone can help me. I have a bricked note 3 which appears to have been bogus for reasons the same as the above. Recovery mode States SM-
Official
Samsung official
But the sticker on the back shows N9005 and the serial is not recognized by keis.
I rooted it using let it rain and tried to flash a recovery to it which then failed and gave me an att&t warning when turning on. I then tried again to flash stock and it now gets to the Samsung logo and no further. I have never been able to flash anything with Odin due to fail (auth) at various stages. Was trying N9005 stock but having read the above tried 900 A From sammobile which also failed at the same point. Running out of ideas and patience, can anyone help? The attached was taken prior to me doing anything.
What model does it say in download mode ??
Related
For two days i have been struggling to root my new Orange Romania N9005.
First of all I downloaded CF Auto Root and Odin 3.09. Followed the steps exactly (i'm not new to rooting) ,Uninstalled Kies and downloaded the latest drivers only, and every single time I try to root it Odin gives the following error:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-hlte-hltexx-smn9005.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On the screen of the note 3 the following error in red : SECURE CHECK FAIL : recovery
I have since tried every single version of ODIN , tried flashing pre-rooted roms only to get my device soft bricked(Fails right at the very end, and then I restored via kies )
,I have tried to change usb ports to no avail, even tried to root it on 4 different laptops.Tried with different cables, with usb debugging on and off, NOTHING WORKS!!!
Please help me I am thinking of setting it on fire!!!
Try install Kies and try again...
/CK
tried with old kies and kies 3 as well.Also tried older drivers.
Do i have a locked BootLoader?This shouldnt be the case as it is an n9005.
Any way to check if bootloader is locked and if so any way to unlock it for the international version?
Thanks!
No one?
Doesn't any one know how to help?Don't know where else to ask.
NavDragan said:
Doesn't any one know how to help?Don't know where else to ask.
Click to expand...
Click to collapse
On the settings page under security..make sure you have reactivation lock uncheck...
Than try again..that's usually the problem
Sent from [email protected] Ass Note III SM-N9005
NavDragan said:
For two days i have been struggling to root my new Orange Romania N9005.
First of all I downloaded CF Auto Root and Odin 3.09. Followed the steps exactly (i'm not new to rooting) ,Uninstalled Kies and downloaded the latest drivers only, and every single time I try to root it Odin gives the following error:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-hlte-hltexx-smn9005.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On the screen of the note 3 the following error in red : SECURE CHECK FAIL : recovery
I have since tried every single version of ODIN , tried flashing pre-rooted roms only to get my device soft bricked(Fails right at the very end, and then I restored via kies )
,I have tried to change usb ports to no avail, even tried to root it on 4 different laptops.Tried with different cables, with usb debugging on and off, NOTHING WORKS!!!
Please help me I am thinking of setting it on fire!!!
Click to expand...
Click to collapse
I had the same issue while rooting my Galaxy S4,tried on every other laptop,different ports,cables and more but then I realized I was using the wrong file.
Yes,the international version comes with Bootloader unlocked so your bootloader is fine.Are you able to boot your phone into Download mode?I am sure u cant boot into Recovery mode,can you?
First go back and check your phone's model no and use the proper file and try again!I will help you,dont worry!
I deactivated the reactivation lock but still the same problem.I have Downloaded the CF-Auto-Root-hlte-hltexx-smn9005.tar file several times same thing every time.My last chance is doing a full wipe of the system and then trying again.I hope orange Romania CSC does't have some sort of security block.
Frustrating thing is the phone is fully functional so i cannot ask for a replacement.And even after the dozens of failed flash attempts it still reads 0x0.
YES!!!Finally.A full wipe did it.!Thank you for your interest in helping me.
iznee said:
On the settings page under security..make sure you have reactivation lock uncheck...
Than try again..that's usually the problem
Sent from [email protected] Ass Note III SM-N9005
Click to expand...
Click to collapse
Thanks that helped! Unlike the OP didnt have to wipe phone.
Thank youu
nsnarayan10 said:
I had the same issue while rooting my Galaxy S4,tried on every other laptop,different ports,cables and more but then I realized I was using the wrong file.
Yes,the international version comes with Bootloader unlocked so your bootloader is fine.Are you able to boot your phone into Download mode?I am sure u cant boot into Recovery mode,can you?
First go back and check your phone's model no and use the proper file and try again!I will help you,dont worry!
Click to expand...
Click to collapse
THank you soo much after following exact instruction that you gave i finally got it rooted!! Thank you!!
nsnarayan10 said:
I had the same issue while rooting my Galaxy S4,tried on every other laptop,different ports,cables and more but then I realized I was using the wrong file.
Yes,the international version comes with Bootloader unlocked so your bootloader is fine.Are you able to boot your phone into Download mode?I am sure u cant boot into Recovery mode,can you?
First go back and check your phone's model no and use the proper file and try again!I will help you,dont worry!
Click to expand...
Click to collapse
thanks for bringing this up.
so where do you get the proper file?
i have the same problem, and a full wi[e has not helped here..
kindly give the correct link.
thanks once again
Before you wanna flash. Don't forget to uncheck reactivation lock, put off your external sd card. And look carefully for your modem and radio. Don't switch with the another kernel before official launch comes.
Sent from my CruelB Note 3 SM-N9005 Snapdragon 800 using Tapatalk
Cruel B said:
Before you wanna flash. Don't forget to uncheck reactivation lock, put off your external sd card. And look carefully for your modem and radio. Don't switch with the another kernel before official launch comes.
Sent from my CruelB Note 3 SM-N9005 Snapdragon 800 using Tapatalk
Click to expand...
Click to collapse
h guys!
i asked for 'the propper files' link?...
my phone now entres boot-loop when i restart it. any help?
...after several loops, it finally completes start up. by now i'd have left it alone for about 15 mins!
tanks, in advance..
---------- Post added at 03:22 PM ---------- Previous post was at 02:51 PM ----------
aidelnma said:
THank you soo much after following exact instruction that you gave i finally got it rooted!! Thank you!!
Click to expand...
Click to collapse
h guys!
i asked for 'the propper files' link?...
my phone now entres boot-loop when i restart it. any help?
...after several loops, it finally completes start up. by now i'd have left it alone for about 15 mins!
tanks, in advance..
THANK YOU!
Yes, the reactivation lock did it for me too. I was stuck at exactly the same point and couldn't think of why, and this didn't even come to mind. In fact, I forgot that I even did that, but it worked. !!!
nsnarayan10 said:
I will help you,dont worry!
Click to expand...
Click to collapse
Help please, I have a (Note 3) SM-N900V on JSS15J.N900VVRUBMJE.
I bought it on Jan 12th ish, and took the firmware update as soon as I saw it because of some reading I had done.... shouldn't have done that I guess.
I am still totally unable to root this thing, Kingo, Odin v3.0.9. I am willing to do w/e (go back to older firmware even if possible)
I know there are no guarantees in this attempt, and would not hold you to anything, I have rooted every other android I have had and am very familiar with the process, any help you can offer would be greatly appreciated
https://plus.google.com/u/0/+JoelJrMcCracken/
This has helped. Thanks a lot.
iznee said:
On the settings page under security..make sure you have reactivation lock uncheck...
Than try again..that's usually the problem
Sent from [email protected] Ass Note III SM-N9005
Click to expand...
Click to collapse
This helped a lot. Problem fixed.
regards
iznee said:
On the settings page under security..make sure you have reactivation lock uncheck...
Than try again..that's usually the problem
Sent from [email protected] Ass Note III SM-N9005
Click to expand...
Click to collapse
Thanks. 1.5 years later and this helped me too!
iznee said:
On the settings page under security..make sure you have reactivation lock uncheck...
Than try again..that's usually the problem
Sent from [email protected] Ass Note III SM-N9005
Click to expand...
Click to collapse
U sir are a life saver!
Thanks!
iznee said:
On the settings page under security..make sure you have reactivation lock uncheck...
Than try again..that's usually the problem
Sent from [email protected] Ass Note III SM-N9005
Click to expand...
Click to collapse
Thank you, you saved me from pulling my hair out :highfive:
Hello to all.
I have a Tab 3 (that was given to me)on Software version T217SVPUBOH1
Hardware Version T217S.04
Model Number SM-TS17S
Android Ver: 4.4.2
Baseband T217SVPUBOH1
I guess Stock Kernel 3.4.0-1715729
Build Number KOT49H.T217SVOUBOH1
Could Someone direct me to the PROPER CF Auto Root and Odin? I am not planning on changing the ROM, I just want to Add Viper to increase the Audio Volume and maybe some other root controls.
Any and All Help Is Appreciated
Thank you in Advance
Blessings
Thank a lott!!!already rooted!!!!
need help quick! im trying to flash stock through odin, did not have custom recovery and it gets near and and says FAIL! ext4 hidden image hellpppppp
MarkDyer1 said:
need help quick! im trying to flash stock through odin, did not have custom recovery and it gets near and and says FAIL! ext4 hidden image hellpppppp
Click to expand...
Click to collapse
Add some screenshots about in ODIN.
im really scared man. i downloaded stock from sam mobile note 3 sm n9005 LTE and followed everything!
Joku1981 said:
Add some screenshots about in ODIN.
Click to expand...
Click to collapse
and again using different odin, i really need help, i tried loads
MarkDyer1 said:
and again using different odin, i really need help, i tried loads
Click to expand...
Click to collapse
Did you have Lollipop before?
Joku1981 said:
Did you have Lollipop before?
Click to expand...
Click to collapse
no, im flashing kit kat which i had before, i only rooted it once and then wanted to unroot, no roms, im UK with EE so dont think i had lolipop
Joku1981 said:
Did you have Lollipop before?
Click to expand...
Click to collapse
do you know what it is? can i fix it??? i really scared, youve replied to one of my oither threads and im scared, i just want to fix this
Joku1981 said:
Did you have Lollipop before?
Click to expand...
Click to collapse
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUGNG1_N9005EVRGNH2_N9005XXUGNG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> sbl1.mbn
<ID:0/008> NAND Write Start!!
<ID:0/008> aboot.mbn
<ID:0/008> rpm.mbn
<ID:0/008> tz.mbn
<ID:0/008> sdi.mbn
<ID:0/008> NON-HLOS.bin
<ID:0/008> boot.img
<ID:0/008> recovery.img
<ID:0/008> system.img.ext4
<ID:0/008> modem.bin
<ID:0/008> cache.img.ext4
<ID:0/008> hidden.img.ext4
<ID:0/008> FAIL! (Ext4)
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
is what odin says
Calm down mate, I know its hard, but that's what you need to do.
Now for that error, its absolutely normal. I have had the exact same error! I mean I still don't know why! I downloaded the German LP ROM and tried to flash it, and it failed, then I downloaded the Polish LP ROM and it flashed successfully. I was certain that the German ROM is meant for 16 GB devices, and as mine is 32 GB it would not flash, but then someone came and said there are no 16 GB models of Note 3 in Europe! Well if that's true then I don't know what's wrong!
So I guess you need to download the Polish LP ROM, and flash it. It should not fail.
devilsdouble said:
Calm down mate, I know its hard, but that's what you need to do.
Now for that error, its absolutely normal. I have had the exact same error! I mean I still don't know why! I downloaded the German LP ROM and tried to flash it, and it failed, then I downloaded the Polish LP ROM and it flashed successfully. I was certain that the German ROM is meant for 16 GB devices, and as mine is 32 GB it would not flash, but then someone came and said there are no 16 GB models of Note 3 in Europe! Well if that's true then I don't know what's wrong!
So I guess you need to download the Polish LP ROM, and flash it. It should not fail.
Click to expand...
Click to collapse
I'm not polish though? I'm Uk on EE which I the stock I tried to flash ? But I can fix this right?
MarkDyer1 said:
I'm not polish though? I'm Uk on EE which I the stock I tried to flash ? But I can fix this right?
Click to expand...
Click to collapse
And I am an Indian :laugh:
No, seriously it doesn't matter what ROM you are flashing regardless of where you are. Yes, you should be able to fix that, at least that's what happened with me, so you shouldn't be any exception, I think.
MarkDyer1 said:
I'm not polish though? I'm Uk on EE which I the stock I tried to flash ? But I can fix this right?
Click to expand...
Click to collapse
This seems problem of the pc or the USB cable/port. Try others.
Joku1981 said:
This seems problem of the pc or the USB cable/port. Try others.
Click to expand...
Click to collapse
Um, I am inclined to say this is wrong mate.
devilsdouble said:
Um, I am inclined to say this is wrong mate.
Click to expand...
Click to collapse
Maybe you can give a better solution coz Im reading your posts in this thread and... anything :fingers-crossed:
devilsdouble said:
And I am an Indian :laugh:
No, seriously it doesn't matter what ROM you are flashing regardless of where you are. Yes, you should be able to fix that, at least that's what happened with me, so you shouldn't be any exception, I think.
Click to expand...
Click to collapse
But then it'll be in weird language? I won't understand any of it and apparently if you put wrong country or carrier on the sim can't tell the phone where to look for satellites to send texts and Internet ect
No it won't be in a weird language. I have flashed the Polish LP and the only way I can tell is that there were a couple of bloat ware apps in Polish.
And any carrier info about SMS etc us on the SIM (as you say and will not be affected by flashing the ROM.
I don't want to be nasty, but if you're this nervous about things then maybe you should stay away from experimenting in until you've read up a bit on it. I once this is fixed.
Sent from my SM-P605 using Tapatalk 4
Try also connecting the cable on a different usb port and also try a different cable if it still fails.
Also if your gonna flash polish lollipop once its finish the first screen will be the choose your language selection then once selected everything will be changed to that language.
Happened to me once but first it was the usb port not supplying enough power so changed it to the back usb port then got at least 50% then failed again and finally replaced my usb cable and was successful.
Check settings-- security...if theres a reactivion lock option..make sure its disabled...it is there on the note 4 and note edge...not sure if itsthere on note 3..but check anyway...if not, maybe something as simple as a different cable and diff USB port may help
Sent from my VZW LG G2
mrao said:
Check settings-- security...if theres a reactivion lock option..make sure its disabled...it is there on the note 4 and note edge...not sure if itsthere on note 3..but check anyway...if not, maybe something as simple as a different cable and diff USB port may help
Sent from my VZW LG G2
Click to expand...
Click to collapse
I can't get on my note 3,it only goes into download mode, why are people thinking its computer or cable?
Because computer usb ports and a busted cable are common reasons fir odin to fail....also make sure samsung kies, if installed, is not running...if you can only get to download mode...all you can do us try flashing stock firnware....or try flashing twrp with auto-reboot unchecked....and then manually reboot to twrp...push a rom and flash it
Sent from my VZW LG G2
Recently I have received Galaxy S5 from my friend. It's model name as SM-G900F under battery. Have Single sim port and one imei. But when I switch on starting with "Samsung Galaxy S5 Duos" logo and started normally. After that when check the product details on "About Device", Product Name as SM-G900FD. But there's no two sim slots. and also showing two imei's when dial *#06#. Seems to be someone has done something. So now I want to take it back to original situation. Is it possible? Needs to convert G900F. Please if some one can help me. :crying:
eranda84 said:
Recently I have received Galaxy S5 from my friend. It's model name as SM-G900F under battery. Have Single sim port and one imei. But when I switch on starting with "Samsung Galaxy S5 Duos" logo and started normally. After that when check the product details on "About Device", Product Name as SM-G900FD. But there's no two sim slots. and also showing two imei's when dial *#06#. Seems to be someone has done something. So now I want to take it back to original situation. Is it possible? Needs to convert G900F. Please if some one can help me. :crying:
Click to expand...
Click to collapse
u can make it over Kies with Firmware Update and Initialization u need the model nr and the seriel nr there .. That i would do but if u not want kies u can also flash a stock G900f rom with odin .. b4 conect make phone off and remove battery for 10 sec .. then insert and go to download mode and flash the rom with odin
4Smoky said:
u can make it over Kies with Firmware Update and Initialization u need the model nr and the seriel nr there .. That i would do but if u not want kies u can also flash a stock G900f rom with odin .. b4 conect make phone off and remove battery for 10 sec .. then insert and go to download mode and flash the rom with odin
Click to expand...
Click to collapse
Thank you for valuable reply. I didn't try yet first step. But I tried second. This is I got error message.
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please Please help me
I tried here flash Android 6. But my mobile currently run Android 5. So do I wanna flash Similar rom?
eranda84 said:
Thank you for valuable reply. I didn't try yet first step. But I tried second. This is I got error message.
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1100)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please Please help me
I tried here flash Android 6. But my mobile currently run Android 5. So do I wanna flash Similar rom?
Click to expand...
Click to collapse
lol some think is not normal
what is written in download mode !!!
ty to flash 900f with another stock rom ( if no work ty with to change pit to successful )
popmpopm said:
lol some think is not normal
what is written in download mode !!!
ty to flash 900f with another stock rom ( if no work ty with to change pit to successful )
Click to expand...
Click to collapse
if you don't mind can you get me steps? Which region pt file? (KLTE_EURO_OPEN?)
No help?
Boot into download mode (Volume Down & Home & Power)
See which model it says there, that is the model you can trust
*Detection* said:
Boot into download mode (Volume Down & Home & Power)
See which model it says there, that is the model you can trust
Click to expand...
Click to collapse
It's G900FD. But this is only have single sim slot. And behind the battery compartment it says 900F.
So seems to be this is modified.:crying::crying:
if anyone can help me i'll help him / her to buy a beer
Use Kies 3
eranda84 said:
if anyone can help me i'll help him / her to buy a beer
Click to expand...
Click to collapse
Im also a G900F owner and I've been in a similiar situation. Download and install Samsung Kies 3(if you hadn't yet), just as the first reply said. On your S5, enter the Download/Odine mode by pressing VolDown+Home+Power Button and connect to PC with your USB. Open Kies 3, go Tools>Firmware upgrade and initialization. In the pop-up windows enter your model name, in your case I suppose its SM-G900F. You'll be asked for the serial number of your phone which is underneath the battery. Its written something like S/N: .... If correct, Kies will start downloading the correct firmware. The process is pretty much automatical, so just wait
After it is done, remove the USB, and the phone will (hopefully) reboot into latest stock version.
eranda84 said:
It's G900FD. But this is only have single sim slot. And behind the battery compartment it says 900F.
So seems to be this is modified.:crying::crying:
Click to expand...
Click to collapse
Forget stickers and firmware model numbers, they can all be modified to look like a different model, usually G900F
If your phone says G900FD in download mode, then your phone is G900FD, or at least the board is
*Detection* said:
Forget stickers and firmware model numbers, they can all be modified to look like a different model, usually G900F
If your phone says G900FD in download mode, then your phone is G900FD, or at least the board is
Click to expand...
Click to collapse
@*Detection* if it was hardware wise an FD it'd have 2 physical sim card slots, the OP says there is only one. In this case, download mode is wrong.....there's something else going on here. And before the OP does *anything* else I'd advise him to back up his IMEI/EFS folder, I've a feeling it's gonna be *critically important* that he does this......
http://i.imgur.com/rVnFwJM.jpg
heisenberg281 said:
Im also a G900F owner and I've been in a similiar situation. Download and install Samsung Kies 3(if you hadn't yet), just as the first reply said. On your S5, enter the Download/Odine mode by pressing VolDown+Home+Power Button and connect to PC with your USB. Open Kies 3, go Tools>Firmware upgrade and initialization. In the pop-up windows enter your model name, in your case I suppose its SM-G900F. You'll be asked for the serial number of your phone which is underneath the battery. Its written something like S/N: .... If correct, Kies will start downloading the correct firmware. The process is pretty much automatical, so just wait
After it is done, remove the USB, and the phone will (hopefully) reboot into latest stock version.
Click to expand...
Click to collapse
Hey man, this is pretty cool until it's started installed to mobile, but it's not continue. Because below error message appeared on mobile with red letters.
"secure check fail : pit" what should I do now? Please need assistance. :good:
keithross39 said:
@*Detection* if it was hardware wise an FD it'd have 2 physical sim card slots, the OP says there is only one. In this case, download mode is wrong.....there's something else going on here. And before the OP does *anything* else I'd advise him to back up his IMEI/EFS folder, I've a feeling it's gonna be *critically important* that he does this......
http://i.imgur.com/rVnFwJM.jpg
Click to expand...
Click to collapse
@ *keithross39* hey sir, please help me on this.... :crying::crying::crying:
There are only three things we can be sure of right now.
1) It's not the FD variant simply because of the lack of a second sim slot.
2) It's not the H variant because the H variant wouldn't run the FD firmware.
3) Your device is ONE of the Qualcom quad core single sim variants.
Now....Here's the tricky part. You say your device has 2 imei numbers.....If you start flashing firmwares that are written to work with a single sim card, one of those IMEI numbers is probably going to get deleted.....If it's the wrong one, you're well and truly stuffed. So you need to find a way to back them up.
Most IMEI/EFS backup utilities require root access.
For now, you're going to have to treat your phone as if it actually *IS* the FD variant and find a root method that works on that variant.
Then once you have root, you can make that all important IMEI/EFS backup.
Once you have that, *then and only then* will it be time to think about how to return the OS to a single sim configuration.
Edit.....
This thread.....
http://forum.xda-developers.com/showthread.php?t=2829293
Gives info about rooting. But beware, if you haven't already done so, rooting will trip KNOX which will torpedo any idea of warranty repair.....
Edit 2....
This should help with the IMEI/EFS backup.....
http://forum.xda-developers.com/galaxy-s3/development/efs-samsung-tool-universal-support-t2602325
(It works on my 900F)
http://i.imgur.com/rVnFwJM.jpg
keithross39 said:
There are only three things we can be sure of right now.
1) It's not the FD variant simply because of the lack of a second sim slot.
2) It's not the H variant because the H variant wouldn't run the FD firmware.
3) Your device is ONE of the Qualcom quad core single sim variants.
Now....Here's the tricky part. You say your device has 2 imei numbers.....If you start flashing firmwares that are written to work with a single sim card, one of those IMEI numbers is probably going to get deleted.....If it's the wrong one, you're well and truly stuffed. So you need to find a way to back them up.
Most IMEI/EFS backup utilities require root access.
For now, you're going to have to treat your phone as if it actually *IS* the FD variant and find a root method that works on that variant.
Then once you have root, you can make that all important IMEI/EFS backup.
Once you have that, *then and only then* will it be time to think about how to return the OS to a single sim configuration.
Edit.....
This thread.....
http://forum.xda-developers.com/showthread.php?t=2829293
Gives info about rooting. But beware, if you haven't already done so, rooting will trip KNOX which will torpedo any idea of warranty repair.....
Edit 2....
This should help with the IMEI/EFS backup.....
http://forum.xda-developers.com/galaxy-s3/development/efs-samsung-tool-universal-support-t2602325
(It works on my 900F)
http://i.imgur.com/rVnFwJM.jpg
Click to expand...
Click to collapse
1) Yes. That's pretty sure me too.
2) Not a H variant
3) Yes.
As I mentioned first post there's two IMEI numbers. But none of those not similar to sticker under battery compartment. (Not match with any of those)
I have rooted mobile using "CF-Auto-Root-klte-klteduosxx-smg900fd". And it's successfully rooted.
And I did IMEI/EFS backup using "Samsung Tool". Now what should I do as a next step?
First thing to do is copy that backup 'off device'......If you have a removable micro sd card, copy it to that.....If not copy it to your pc or even cloud storage.....it's no good having a backup stored in device if the in device storage is formatted in my next suggestion......which is to flash not only a firmware, but a pit file too. I'd suggest using sammobile or samsung updates for the 900F firmware (the F variant firmware is as good a place to start as any) and the resources of XDA to locate the correct pit file. You can check here for pit files.....
S5 pit files (3rd post)
http://forum.xda-developers.com/showthread.php?t=2737448
But as it is now 3.52 AM where I am, I'm going to bed.....My kids will be up in about 4 hours so I need to get *some* sleep.....lol
Final edit for tonight......
As an alternative, you could forget about a firmware entirely, and go the custom rom route......just a thought.....
http://i.imgur.com/rVnFwJM.jpg
keithross39 said:
First thing to do is copy that backup 'off device'......If you have a removable micro sd card, copy it to that.....If not copy it to your pc or even cloud storage.....it's no good having a backup stored in device if the in device storage is formatted in my next suggestion......which is to flash not only a firmware, but a pit file too. I'd suggest using sammobile or samsung updates for the 900F firmware (the F variant firmware is as good a place to start as any) and the resources of XDA to locate the correct pit file. You can check here for pit files.....
S5 pit files (3rd post)
http://forum.xda-developers.com/showthread.php?t=2737448
But as it is now 3.52 AM where I am, I'm going to bed.....My kids will be up in about 4 hours so I need to get *some* sleep.....lol
Final edit for tonight......
As an alternative, you could forget about a firmware entirely, and go the custom rom route......just a thought.....
http://i.imgur.com/rVnFwJM.jpg
Click to expand...
Click to collapse
Ok thank you sir and Hats off. :good:
Have a Good Night
I have tried everything but again failed in Re-partition. Now only one left. That's run a custom rom. Will see CM13 and back to stock rom.
But anyone can help me on pit file failed, please help me.
keithross39 said:
@*Detection* if it was hardware wise an FD it'd have 2 physical sim card slots, the OP says there is only one. In this case, download mode is wrong.....there's something else going on here. And before the OP does *anything* else I'd advise him to back up his IMEI/EFS folder, I've a feeling it's gonna be *critically important* that he does this......
http://i.imgur.com/rVnFwJM.jpg
Click to expand...
Click to collapse
Never to date have we seen or heard of download mode being wrong, and CF AR for the G900FD just worked for OP
And if it turns out to be wrong, we both have a LOT of threads to edit when we have told other members to always trust download mode
To my knowledge, there is no way to reprogram the chip on the board to change the model number in download mode, maybe the phone is a fake
@ OP - can you post a photo of the back of the phone, with the back cover removed, so we can see the physical location of the SIM slot?
Edit out the IMEI etc if it shows on a sticker
Hi guys, looking for a little help / advice.
I have a UK Galaxy S4 (I9505) which is rooted and running CM12.01 ROM.
I am trying to Unroot and restore a stock rom via Odin, but it always fails.
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1101)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've tried different versions of the firmware, different versions of Odin. Changed USB cables and ports, but always the same error. Any advice greatly appreciated.
Thanks
Are you flashing the newest firmware available?
GDReaper said:
Are you flashing the newest firmware available?
Click to expand...
Click to collapse
I think so....
the file is: I9505XXUHOD7_I9505EVRHOD1_I9505XXUHOD7_HOME.tar.md5
flashing original rom for samobile.
johnfree98 said:
flashing original rom for samobile.
Click to expand...
Click to collapse
that is originlal ROM from sammobile as far as I know.
the version bootloader and modem to be the same that gives you the cm
johnfree98 said:
the version bootloader and modem to be the same that gives you the cm
Click to expand...
Click to collapse
not quite sure what u mean, could you explain please...
mrmcox said:
not quite sure what u mean, could you explain please...
Click to expand...
Click to collapse
I think he wants to say that you should try and flash a ROM with the same baseband you currently have.
You could also try another windows. Windows 7 always worked for me, but Windows 10 gave me some problems.
GDReaper said:
I think he wants to say that you should try and flash a ROM with the same baseband you currently have.
You could also try another windows. Windows 7 always worked for me, but Windows 10 gave me some problems.
Click to expand...
Click to collapse
So the baseband from the custom ROM that is installed is L720TVPUCOH1. Which official stock ROM should I try ?
Thanks in advance...
mrmcox said:
So the baseband from the custom ROM that is installed is L720TVPUCOH1. Which official stock ROM should I try ?
Thanks in advance...
Click to expand...
Click to collapse
The one with the same baseband. It's worth a try.
GDReaper said:
The one with the same baseband. It's worth a try.
Click to expand...
Click to collapse
Ok, I've found a Stock ROM with the same baseband, but its a US Sprint based ROM, and I have a UK based phone....Will this be ok ?
No. Odin does version checking to confirm that the firmware actually is for the device it is being flashed upon and will fail on a mismatch.
It sounds to me however that you might possibly have a Frankenphone, since you should not be able to install a Sprint bootloader on an international device. Would you please enter Download Mode and read off the model number posted on the screen? This is just to confirm that you really do have an I9505, and not another device masquerading as one.
Strephon Alkhalikoi said:
No. Odin does version checking to confirm that the firmware actually is for the device it is being flashed upon and will fail on a mismatch.
It sounds to me however that you might possibly have a Frankenphone, since you should not be able to install a Sprint bootloader on an international device. Would you please enter Download Mode and read off the model number posted on the screen? This is just to confirm that you really do have an I9505, and not another device masquerading as one.
Click to expand...
Click to collapse
Thanks for the reply..... I had already attempted to install the stock ROM I mentioned above, and It actually worked...
I just went into the Download mode, and checked the product number which now says SPH-L720T.. I also checked this in the "about device" section on the phone, which now gives the same info..... But I'm almost certain it said I9505 last time..
Is this going to be a problem, or should the phone just carry on as normal now ?
Thanks again
mrmcox said:
Thanks for the reply..... I had already attempted to install the stock ROM I mentioned above, and It actually worked...
I just went into the Download mode, and checked the product number which now says SPH-L720T.. I also checked this in the "about device" section on the phone, which now gives the same info..... But I'm almost certain it said I9505 last time..
Is this going to be a problem, or should the phone just carry on as normal now ?
Thanks again
Click to expand...
Click to collapse
The "about device" info can be changed very easily. You could make it show that your device is a S7 and is running iOS.
Download mode info is hard-coded.
So your device always was, and will be, a SPH-L720T
And since it's a Sprint phone, there is one major thing to keep in mind. In the UK and on the European continent, that phone will not get LTE service. The radio in the phone expects to see American channels and won't pick up the European ones. This is like my S4, but only in reverse. In my case, my S4 expects European channels as it's an I9505 and doesn't see American channels.
The only exception to the above is if the original owner managed to rewrite the Qualcomm chip to enable European bands.
GDReaper said:
Download mode info is hard-coded.
So your device always was, and will be, a SPH-L720T
Click to expand...
Click to collapse
This is what I don't understand....As I said, I am almost certain, that this used to say GT I9505, and was definitely an LTE version. I have used this phone on 4G networks. The phone was purchased in the UK direct from EE as a network upgrade. Could something I have done have messed this up ? and anyway to restore it ?
mrmcox said:
This is what I don't understand....As I said, I am almost certain, that this used to say GT I9505, and was definitely an LTE version. I have used this phone on 4G networks. The phone was purchased in the UK direct from EE as a network upgrade. Could something I have done have messed this up ? and anyway to restore it ?
Click to expand...
Click to collapse
It used to say GT-I9505 in download mode?
GDReaper said:
It used to say GT-I9505 in download mode?
Click to expand...
Click to collapse
I'm almost certain it did...not 100% sure, but 80-90% positive it did.... is that possible ? or am I just probably mistaken ?
mrmcox said:
I'm almost certain it did...not 100% sure, but 80-90% positive it did.... is that possible ? or am I just probably mistaken ?
Click to expand...
Click to collapse
I highly doubt it did.
I don't think the info displayed in download mode can be modified. Even if it can, I doubt it is an easy process to do. And flashing different ROMs is 100% not going to change it.
Download mode is similar to the bios of a PC, as I believe it's installed on the phone's motherboard itself, just like a PC's bios.
GDReaper said:
I highly doubt it did.
I don't think the info displayed in download mode can be modified. Even if it can, I doubt it is an easy process to do. And flashing different ROMs is 100% not going to change it.
Download mode is similar to the bios of a PC, as I believe it's installed on the phone's motherboard itself, just like a PC's bios.
Click to expand...
Click to collapse
Is there any way to try and convert it to I9505 baseband, as now it wont receive any data signal in uk, which it always did before. if so how can I do this, and what files should I be looking for ?
thanks
My sister's phone is Galaxy Grand Prime and still running Android 4.4.4. I've searched over the net and there is Lollipop update already for some countries. There's still no update here in the Philippines. Can I update this device using firmwares from other countries? Thanks!
jelmerpeligrino said:
My sister's phone is Galaxy Grand Prime and still running Android 4.4.4. I've searched over the net and there is Lollipop update already for some countries. There's still no update here in the Philippines. Can I update this device using firmwares from other countries? Thanks!
Click to expand...
Click to collapse
yes you can! i'm also from the philippines and i'm currently on the Russian firmware (G530HXXUBOH5)
@jelmerpeligrino Post a screenshot of your About Phone. @morgannoobman That is a really old firmware.
Has.007 said:
@jelmerpeligrino Post a screenshot of your About Phone. @morgannoobman That is a really old firmware.
Click to expand...
Click to collapse
Here bro.
morgannoobman said:
yes you can! i'm also from the philippines and i'm currently on the Russian firmware (G530HXXUBOH5)
Click to expand...
Click to collapse
How did you do it?
jelmerpeligrino said:
Here bro.
Click to expand...
Click to collapse
Download this firmware nd the mention me. Also download Odin 3.10.xx
http://www.sammobile.com/firmwares/download/106519/G530HXCU1BPI2_G530HUUB1BPI1_TTT/
Has.007 said:
Download this firmware nd the mention me. Also download Odin 3.10.xx
http://www.sammobile.com/firmwares/download/106519/G530HXCU1BPI2_G530HUUB1BPI1_TTT/
Click to expand...
Click to collapse
If I flashed Lollipop on this device, all data stored on my device will be deleted?
And I searched the latest version of odin, it is now 3.12.3.
jelmerpeligrino said:
If I flashed Lollipop on this device, all data stored on my device will be deleted?
And I searched the latest version of odin, it is now 3.12.3.
Click to expand...
Click to collapse
No
jelmerpeligrino said:
If I flashed Lollipop on this device, all data stored on my device will be deleted?
And I searched the latest version of odin, it is now 3.12.3.
Click to expand...
Click to collapse
As @waleeds1 said, No. But I recommend you to take backup of all your data nd do a factory reset after you flash Lollipop firmware.
That way you won't get any lags or performance glitches.
Has.007 said:
As @waleeds1 said, No. But I recommend you to take backup of all your data nd do a factory reset after you flash Lollipop firmware.
That way you won't get any lags or performance glitches.
Click to expand...
Click to collapse
What are the steps on how to flash Lollipop? I already have the necessary files to begin with. Thanks!
jelmerpeligrino said:
What are the steps on how to flash Lollipop? I already have the necessary files to begin with. Thanks!
Click to expand...
Click to collapse
Make sure you've a good backup. Nd also you've Samsung USB drivers already installed in your PC.
Power off your device nd boot in download mode by pressing Volume Down + Home + Power Buttons together.
Then open Odin nd connect your phone to PC via data cable nd press volume Up key on phone, then if it shows you "Added" in Odin you're good to go.
Select the AP option nd select the firmware which you've downloaded. Now it'll take some time to verify the md5 as depending upon the speed of your PC. Once it has verified you'll be able to click on other options. So now you've to click on Start nd make sure you don't move your device or the connection doesn't cut off or your device might get hard bricked.
That's it, the flashing time would be about 4-5 minutes. After it is flashed the phone will reboot nd now you can factory reset the device properly for a clean new device.
I've told everything you needed to know.
Enjoy!
Has.007 said:
As @waleeds1 said, No. But I recommend you to take backup of all your data nd do a factory reset after you flash Lollipop firmware.
That way you won't get any lags or performance glitches.
Click to expand...
Click to collapse
The thing you said is correct but I recommend first start your phone without factory reseting @jelmerpeligrino becuase if u dont face any performance or other issues. But if u wish to factory then its still a good choice
waleeds1 said:
The thing you said is correct but I recommend first start your phone without factory reseting @jelmerpeligrino becuase if u dont face any performance or other issues. But if u wish to factory then its still a good choice
Click to expand...
Click to collapse
Yes I told that in my second post.
Actually I believe he has been using Kitkat from a long time nd for most of the apps, the things have changed. The API differences creates certain problems as it is recommended by Samsung itself to factory reset the device after Android version change.
From Kitkat to Kitkat nd Lollipop to Lollipop factory reset is not needed but for SDK changing it is needed.
Has.007 said:
Yes I told that in my second post.
Actually I believe he has been using Kitkat from a long time nd for most of the apps, the things have changed. The API differences creates certain problem as it is recommended by Samsung itself to factory reset the device after Android version change.
From Kitkat to Kitkat nd Lollipop to Lollipop factory reset is not needed but for SDK changing it is needed.
Click to expand...
Click to collapse
I didnt read that part. U got a point there mate.
Hi, I've roote my Galaxy grand prime successfully and want to upgrade to Lollipop but it doesn't work, I've tried already several files but it always ends with an error
here is the Odin Log:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
What can I do to make i happen
Happy new year to all of you
woris said:
Hi, I've roote my Galaxy grand prime successfully and want to upgrade to Lollipop but it doesn't work, I've tried already several files but it always ends with an error
here is the Odin Log:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
What can I do to make i happen
Happy new year to all of you
Click to expand...
Click to collapse
Did you download the correct firmware and are you using ap in odin if nor then you should use ap and browse for the firmware.
waleeds1 said:
Did you download the correct firmware and are you using ap in odin if nor then you should use ap and browse for the firmware.
Click to expand...
Click to collapse
Thanks for your reply, yes, I've got the correct Firmware, correct Odin settings, I even tried the Kasachstan firmware that you used but same result.
Has.007 said:
Yes I told that in my second post.
Actually I believe he has been using Kitkat from a long time nd for most of the apps, the things have changed. The API differences creates certain problems as it is recommended by Samsung itself to factory reset the device after Android version change.
From Kitkat to Kitkat nd Lollipop to Lollipop factory reset is not needed but for SDK changing it is needed.
Click to expand...
Click to collapse
Is this normal bro? I flashed it already.
waleeds1 said:
Did you download the correct firmware and are you using ap in odin if nor then you should use ap and browse for the firmware.
Click to expand...
Click to collapse
woris said:
Thanks for your reply, yes, I've got the correct Firmware, correct Odin settings, I even tried the Kasachstan firmware that you used but same result.
Click to expand...
Click to collapse
No you don't have the right firmware for your device. The baseband difference. Post a screenshot from your About Phone nd also the link of firmware you're trying to flash.
jelmerpeligrino said:
Is this normal bro? I flashed it already.
Click to expand...
Click to collapse
Yes it is normal, It is weird tho how you've two devices connected. Or maybe there's some bug in this version of Odin. Anyways all working good?
Has.007 said:
No you don't have the right firmware for your device. The baseband difference. Post a screenshot from your About Phone nd also the link of firmware you're trying to flash.
Yes it is normal, It is weird tho how you've two devices connected. Or maybe there's some bug in this version of Odin. Anyways all working good?
Click to expand...
Click to collapse
So far, it was good. The performance is better now compared to Kitkat and and the sluggishness was gone. Thanks bro!
Btw, do you have any Marshmallow ROM for this device?