need help quick! im trying to flash stock through odin, did not have custom recovery and it gets near and and says FAIL! ext4 hidden image hellpppppp
MarkDyer1 said:
need help quick! im trying to flash stock through odin, did not have custom recovery and it gets near and and says FAIL! ext4 hidden image hellpppppp
Click to expand...
Click to collapse
Add some screenshots about in ODIN.
im really scared man. i downloaded stock from sam mobile note 3 sm n9005 LTE and followed everything!
Joku1981 said:
Add some screenshots about in ODIN.
Click to expand...
Click to collapse
and again using different odin, i really need help, i tried loads
MarkDyer1 said:
and again using different odin, i really need help, i tried loads
Click to expand...
Click to collapse
Did you have Lollipop before?
Joku1981 said:
Did you have Lollipop before?
Click to expand...
Click to collapse
no, im flashing kit kat which i had before, i only rooted it once and then wanted to unroot, no roms, im UK with EE so dont think i had lolipop
Joku1981 said:
Did you have Lollipop before?
Click to expand...
Click to collapse
do you know what it is? can i fix it??? i really scared, youve replied to one of my oither threads and im scared, i just want to fix this
Joku1981 said:
Did you have Lollipop before?
Click to expand...
Click to collapse
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUGNG1_N9005EVRGNH2_N9005XXUGNG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> sbl1.mbn
<ID:0/008> NAND Write Start!!
<ID:0/008> aboot.mbn
<ID:0/008> rpm.mbn
<ID:0/008> tz.mbn
<ID:0/008> sdi.mbn
<ID:0/008> NON-HLOS.bin
<ID:0/008> boot.img
<ID:0/008> recovery.img
<ID:0/008> system.img.ext4
<ID:0/008> modem.bin
<ID:0/008> cache.img.ext4
<ID:0/008> hidden.img.ext4
<ID:0/008> FAIL! (Ext4)
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
is what odin says
Calm down mate, I know its hard, but that's what you need to do.
Now for that error, its absolutely normal. I have had the exact same error! I mean I still don't know why! I downloaded the German LP ROM and tried to flash it, and it failed, then I downloaded the Polish LP ROM and it flashed successfully. I was certain that the German ROM is meant for 16 GB devices, and as mine is 32 GB it would not flash, but then someone came and said there are no 16 GB models of Note 3 in Europe! Well if that's true then I don't know what's wrong!
So I guess you need to download the Polish LP ROM, and flash it. It should not fail.
devilsdouble said:
Calm down mate, I know its hard, but that's what you need to do.
Now for that error, its absolutely normal. I have had the exact same error! I mean I still don't know why! I downloaded the German LP ROM and tried to flash it, and it failed, then I downloaded the Polish LP ROM and it flashed successfully. I was certain that the German ROM is meant for 16 GB devices, and as mine is 32 GB it would not flash, but then someone came and said there are no 16 GB models of Note 3 in Europe! Well if that's true then I don't know what's wrong!
So I guess you need to download the Polish LP ROM, and flash it. It should not fail.
Click to expand...
Click to collapse
I'm not polish though? I'm Uk on EE which I the stock I tried to flash ? But I can fix this right?
MarkDyer1 said:
I'm not polish though? I'm Uk on EE which I the stock I tried to flash ? But I can fix this right?
Click to expand...
Click to collapse
And I am an Indian :laugh:
No, seriously it doesn't matter what ROM you are flashing regardless of where you are. Yes, you should be able to fix that, at least that's what happened with me, so you shouldn't be any exception, I think.
MarkDyer1 said:
I'm not polish though? I'm Uk on EE which I the stock I tried to flash ? But I can fix this right?
Click to expand...
Click to collapse
This seems problem of the pc or the USB cable/port. Try others.
Joku1981 said:
This seems problem of the pc or the USB cable/port. Try others.
Click to expand...
Click to collapse
Um, I am inclined to say this is wrong mate.
devilsdouble said:
Um, I am inclined to say this is wrong mate.
Click to expand...
Click to collapse
Maybe you can give a better solution coz Im reading your posts in this thread and... anything :fingers-crossed:
devilsdouble said:
And I am an Indian :laugh:
No, seriously it doesn't matter what ROM you are flashing regardless of where you are. Yes, you should be able to fix that, at least that's what happened with me, so you shouldn't be any exception, I think.
Click to expand...
Click to collapse
But then it'll be in weird language? I won't understand any of it and apparently if you put wrong country or carrier on the sim can't tell the phone where to look for satellites to send texts and Internet ect
No it won't be in a weird language. I have flashed the Polish LP and the only way I can tell is that there were a couple of bloat ware apps in Polish.
And any carrier info about SMS etc us on the SIM (as you say and will not be affected by flashing the ROM.
I don't want to be nasty, but if you're this nervous about things then maybe you should stay away from experimenting in until you've read up a bit on it. I once this is fixed.
Sent from my SM-P605 using Tapatalk 4
Try also connecting the cable on a different usb port and also try a different cable if it still fails.
Also if your gonna flash polish lollipop once its finish the first screen will be the choose your language selection then once selected everything will be changed to that language.
Happened to me once but first it was the usb port not supplying enough power so changed it to the back usb port then got at least 50% then failed again and finally replaced my usb cable and was successful.
Check settings-- security...if theres a reactivion lock option..make sure its disabled...it is there on the note 4 and note edge...not sure if itsthere on note 3..but check anyway...if not, maybe something as simple as a different cable and diff USB port may help
Sent from my VZW LG G2
mrao said:
Check settings-- security...if theres a reactivion lock option..make sure its disabled...it is there on the note 4 and note edge...not sure if itsthere on note 3..but check anyway...if not, maybe something as simple as a different cable and diff USB port may help
Sent from my VZW LG G2
Click to expand...
Click to collapse
I can't get on my note 3,it only goes into download mode, why are people thinking its computer or cable?
Because computer usb ports and a busted cable are common reasons fir odin to fail....also make sure samsung kies, if installed, is not running...if you can only get to download mode...all you can do us try flashing stock firnware....or try flashing twrp with auto-reboot unchecked....and then manually reboot to twrp...push a rom and flash it
Sent from my VZW LG G2
Related
For two days i have been struggling to root my new Orange Romania N9005.
First of all I downloaded CF Auto Root and Odin 3.09. Followed the steps exactly (i'm not new to rooting) ,Uninstalled Kies and downloaded the latest drivers only, and every single time I try to root it Odin gives the following error:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-hlte-hltexx-smn9005.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On the screen of the note 3 the following error in red : SECURE CHECK FAIL : recovery
I have since tried every single version of ODIN , tried flashing pre-rooted roms only to get my device soft bricked(Fails right at the very end, and then I restored via kies )
,I have tried to change usb ports to no avail, even tried to root it on 4 different laptops.Tried with different cables, with usb debugging on and off, NOTHING WORKS!!!
Please help me I am thinking of setting it on fire!!!
Try install Kies and try again...
/CK
tried with old kies and kies 3 as well.Also tried older drivers.
Do i have a locked BootLoader?This shouldnt be the case as it is an n9005.
Any way to check if bootloader is locked and if so any way to unlock it for the international version?
Thanks!
No one?
Doesn't any one know how to help?Don't know where else to ask.
NavDragan said:
Doesn't any one know how to help?Don't know where else to ask.
Click to expand...
Click to collapse
On the settings page under security..make sure you have reactivation lock uncheck...
Than try again..that's usually the problem
Sent from [email protected] Ass Note III SM-N9005
NavDragan said:
For two days i have been struggling to root my new Orange Romania N9005.
First of all I downloaded CF Auto Root and Odin 3.09. Followed the steps exactly (i'm not new to rooting) ,Uninstalled Kies and downloaded the latest drivers only, and every single time I try to root it Odin gives the following error:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-hlte-hltexx-smn9005.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On the screen of the note 3 the following error in red : SECURE CHECK FAIL : recovery
I have since tried every single version of ODIN , tried flashing pre-rooted roms only to get my device soft bricked(Fails right at the very end, and then I restored via kies )
,I have tried to change usb ports to no avail, even tried to root it on 4 different laptops.Tried with different cables, with usb debugging on and off, NOTHING WORKS!!!
Please help me I am thinking of setting it on fire!!!
Click to expand...
Click to collapse
I had the same issue while rooting my Galaxy S4,tried on every other laptop,different ports,cables and more but then I realized I was using the wrong file.
Yes,the international version comes with Bootloader unlocked so your bootloader is fine.Are you able to boot your phone into Download mode?I am sure u cant boot into Recovery mode,can you?
First go back and check your phone's model no and use the proper file and try again!I will help you,dont worry!
I deactivated the reactivation lock but still the same problem.I have Downloaded the CF-Auto-Root-hlte-hltexx-smn9005.tar file several times same thing every time.My last chance is doing a full wipe of the system and then trying again.I hope orange Romania CSC does't have some sort of security block.
Frustrating thing is the phone is fully functional so i cannot ask for a replacement.And even after the dozens of failed flash attempts it still reads 0x0.
YES!!!Finally.A full wipe did it.!Thank you for your interest in helping me.
iznee said:
On the settings page under security..make sure you have reactivation lock uncheck...
Than try again..that's usually the problem
Sent from [email protected] Ass Note III SM-N9005
Click to expand...
Click to collapse
Thanks that helped! Unlike the OP didnt have to wipe phone.
Thank youu
nsnarayan10 said:
I had the same issue while rooting my Galaxy S4,tried on every other laptop,different ports,cables and more but then I realized I was using the wrong file.
Yes,the international version comes with Bootloader unlocked so your bootloader is fine.Are you able to boot your phone into Download mode?I am sure u cant boot into Recovery mode,can you?
First go back and check your phone's model no and use the proper file and try again!I will help you,dont worry!
Click to expand...
Click to collapse
THank you soo much after following exact instruction that you gave i finally got it rooted!! Thank you!!
nsnarayan10 said:
I had the same issue while rooting my Galaxy S4,tried on every other laptop,different ports,cables and more but then I realized I was using the wrong file.
Yes,the international version comes with Bootloader unlocked so your bootloader is fine.Are you able to boot your phone into Download mode?I am sure u cant boot into Recovery mode,can you?
First go back and check your phone's model no and use the proper file and try again!I will help you,dont worry!
Click to expand...
Click to collapse
thanks for bringing this up.
so where do you get the proper file?
i have the same problem, and a full wi[e has not helped here..
kindly give the correct link.
thanks once again
Before you wanna flash. Don't forget to uncheck reactivation lock, put off your external sd card. And look carefully for your modem and radio. Don't switch with the another kernel before official launch comes.
Sent from my CruelB Note 3 SM-N9005 Snapdragon 800 using Tapatalk
Cruel B said:
Before you wanna flash. Don't forget to uncheck reactivation lock, put off your external sd card. And look carefully for your modem and radio. Don't switch with the another kernel before official launch comes.
Sent from my CruelB Note 3 SM-N9005 Snapdragon 800 using Tapatalk
Click to expand...
Click to collapse
h guys!
i asked for 'the propper files' link?...
my phone now entres boot-loop when i restart it. any help?
...after several loops, it finally completes start up. by now i'd have left it alone for about 15 mins!
tanks, in advance..
---------- Post added at 03:22 PM ---------- Previous post was at 02:51 PM ----------
aidelnma said:
THank you soo much after following exact instruction that you gave i finally got it rooted!! Thank you!!
Click to expand...
Click to collapse
h guys!
i asked for 'the propper files' link?...
my phone now entres boot-loop when i restart it. any help?
...after several loops, it finally completes start up. by now i'd have left it alone for about 15 mins!
tanks, in advance..
THANK YOU!
Yes, the reactivation lock did it for me too. I was stuck at exactly the same point and couldn't think of why, and this didn't even come to mind. In fact, I forgot that I even did that, but it worked. !!!
nsnarayan10 said:
I will help you,dont worry!
Click to expand...
Click to collapse
Help please, I have a (Note 3) SM-N900V on JSS15J.N900VVRUBMJE.
I bought it on Jan 12th ish, and took the firmware update as soon as I saw it because of some reading I had done.... shouldn't have done that I guess.
I am still totally unable to root this thing, Kingo, Odin v3.0.9. I am willing to do w/e (go back to older firmware even if possible)
I know there are no guarantees in this attempt, and would not hold you to anything, I have rooted every other android I have had and am very familiar with the process, any help you can offer would be greatly appreciated
https://plus.google.com/u/0/+JoelJrMcCracken/
This has helped. Thanks a lot.
iznee said:
On the settings page under security..make sure you have reactivation lock uncheck...
Than try again..that's usually the problem
Sent from [email protected] Ass Note III SM-N9005
Click to expand...
Click to collapse
This helped a lot. Problem fixed.
regards
iznee said:
On the settings page under security..make sure you have reactivation lock uncheck...
Than try again..that's usually the problem
Sent from [email protected] Ass Note III SM-N9005
Click to expand...
Click to collapse
Thanks. 1.5 years later and this helped me too!
iznee said:
On the settings page under security..make sure you have reactivation lock uncheck...
Than try again..that's usually the problem
Sent from [email protected] Ass Note III SM-N9005
Click to expand...
Click to collapse
U sir are a life saver!
Thanks!
iznee said:
On the settings page under security..make sure you have reactivation lock uncheck...
Than try again..that's usually the problem
Sent from [email protected] Ass Note III SM-N9005
Click to expand...
Click to collapse
Thank you, you saved me from pulling my hair out :highfive:
Hello to all.
I have a Tab 3 (that was given to me)on Software version T217SVPUBOH1
Hardware Version T217S.04
Model Number SM-TS17S
Android Ver: 4.4.2
Baseband T217SVPUBOH1
I guess Stock Kernel 3.4.0-1715729
Build Number KOT49H.T217SVOUBOH1
Could Someone direct me to the PROPER CF Auto Root and Odin? I am not planning on changing the ROM, I just want to Add Viper to increase the Audio Volume and maybe some other root controls.
Any and All Help Is Appreciated
Thank you in Advance
Blessings
Thank a lott!!!already rooted!!!!
Hi, this is the first time i post something in this forum. First I want to say sorry for my bad english and second, here is my BIG problem:
I just purchased a Galaxy S4 I337 for AT&T. I have to say that I don't understand very much about rooting and modding. The thing is that I tried to root this phone and then I can't do nothing with it. I only can enter into the odin mode.
I tried to unroot and reinstall the Stock Factory Rom that I already donwloaded from sammobile and I used Odin 3.04 and 3.07 versios and in both fail the operation and in both happen the same thing:
ODIN said:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDB_I337ATTAMDB_I337UCUAMDB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
and the phone said:
ODIN MODE
PRODUCT NAME: SGH-I337
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: CUSTOM
CSB-CONFIG-LSB: 0X30
WRITE PROTECTION: ENABLE
START [224, 1440]
SW REV. CHECK FAIL : FUSED : 2 , BINARY : 1
and this is it.
Any ideas to fix this problem?
I will appreciate any suggestion.
I attached 2 pics.
You have mf3 firmware on your phone. Odin won't work. I'd take it to bestbuy with a Samsung experience. They can flash the mf3 firmware.
http://forum.xda-developers.com/showthread.php?p=45359306
jd1639 said:
You have mf3 firmware on your phone. Odin won't work. I'd take it to bestbuy with a Samsung experience. They can flash the mf3 firmware.
http://forum.xda-developers.com/showthread.php?p=45359306
Click to expand...
Click to collapse
/\ /\ /\ /\
what this man said...
thank you!
xBeerdroiDx said:
/\ /\ /\ /\
what this man said...
Click to expand...
Click to collapse
So do you think that this is covered by warranty or something?
THANK YOU!!!
jd1639 said:
You have mf3 firmware on your phone. Odin won't work. I'd take it to bestbuy with a Samsung experience. They can flash the mf3 firmware.
http://forum.xda-developers.com/showthread.php?p=45359306
Click to expand...
Click to collapse
So do you think that this problem that I caused is covered by warranty???
cemanue said:
So do you think that this problem that I caused is covered by warranty???
Click to expand...
Click to collapse
Read the link I gave you. That may give you some ideas on how to handle your situation.
cemanue said:
So do you think that this problem that I caused is covered by warranty???
Click to expand...
Click to collapse
As the posted link will tell you - they shouldn't give you any problems with this unless you've got huge indicators you voided your warranty.
FIXED!!!!
Hi again!
I did the thing that you told me and the phone is already fixed!!! it has all factory settings. Thank you guys!
My question is, i can't root this phone right now? it is impossible? I have to wait for another method?
cemanue said:
Hi again!
I did the thing that you told me and the phone is already fixed!!! it has all factory settings. Thank you guys!
My question is, i can't root this phone right now? it is impossible? I have to wait for another method?
Click to expand...
Click to collapse
You can root it. You can't put on a custom recovery. Look up safestrap, it will allow you to use custom roms
How has your phone repaired?
jd1639 said:
You have mf3 firmware on your phone. Odin won't work. I'd take it to bestbuy with a Samsung experience. They can flash the mf3 firmware.
http://forum.xda-developers.com/showthread.php?p=45359306
Click to expand...
Click to collapse
I took mine to best buy, and none of them seem to know how to fix it... complete utter morons, if you wil; not generallyl. They don't even know what a firmware was, and tried Kies to fix it....really?!! So far it may be only for certain best buy locations, because surely this one in CA certainly doesn't.
By the way, if anyone has found a solution, I need urgent help. I have the same problem as the poster... NAND Write Fail, certainly a type of Bricked.
ernestriderxx said:
I took mine to best buy, and none of them seem to know how to fix it... complete utter morons, if you wil; not generallyl. They don't even know what a firmware was, and tried Kies to fix it....really?!! So far it may be only for certain best buy locations, because surely this one in CA certainly doesn't.
By the way, if anyone has found a solution, I need urgent help. I have the same problem as the poster... NAND Write Fail, certainly a type of Bricked.
Click to expand...
Click to collapse
If you're on mk2 firmware you need this http://forum.xda-developers.com/showthread.php?p=49687770
There's something similar for mf3. Google i337 mf3 tar files xda
My sister's phone is Galaxy Grand Prime and still running Android 4.4.4. I've searched over the net and there is Lollipop update already for some countries. There's still no update here in the Philippines. Can I update this device using firmwares from other countries? Thanks!
jelmerpeligrino said:
My sister's phone is Galaxy Grand Prime and still running Android 4.4.4. I've searched over the net and there is Lollipop update already for some countries. There's still no update here in the Philippines. Can I update this device using firmwares from other countries? Thanks!
Click to expand...
Click to collapse
yes you can! i'm also from the philippines and i'm currently on the Russian firmware (G530HXXUBOH5)
@jelmerpeligrino Post a screenshot of your About Phone. @morgannoobman That is a really old firmware.
Has.007 said:
@jelmerpeligrino Post a screenshot of your About Phone. @morgannoobman That is a really old firmware.
Click to expand...
Click to collapse
Here bro.
morgannoobman said:
yes you can! i'm also from the philippines and i'm currently on the Russian firmware (G530HXXUBOH5)
Click to expand...
Click to collapse
How did you do it?
jelmerpeligrino said:
Here bro.
Click to expand...
Click to collapse
Download this firmware nd the mention me. Also download Odin 3.10.xx
http://www.sammobile.com/firmwares/download/106519/G530HXCU1BPI2_G530HUUB1BPI1_TTT/
Has.007 said:
Download this firmware nd the mention me. Also download Odin 3.10.xx
http://www.sammobile.com/firmwares/download/106519/G530HXCU1BPI2_G530HUUB1BPI1_TTT/
Click to expand...
Click to collapse
If I flashed Lollipop on this device, all data stored on my device will be deleted?
And I searched the latest version of odin, it is now 3.12.3.
jelmerpeligrino said:
If I flashed Lollipop on this device, all data stored on my device will be deleted?
And I searched the latest version of odin, it is now 3.12.3.
Click to expand...
Click to collapse
No
jelmerpeligrino said:
If I flashed Lollipop on this device, all data stored on my device will be deleted?
And I searched the latest version of odin, it is now 3.12.3.
Click to expand...
Click to collapse
As @waleeds1 said, No. But I recommend you to take backup of all your data nd do a factory reset after you flash Lollipop firmware.
That way you won't get any lags or performance glitches.
Has.007 said:
As @waleeds1 said, No. But I recommend you to take backup of all your data nd do a factory reset after you flash Lollipop firmware.
That way you won't get any lags or performance glitches.
Click to expand...
Click to collapse
What are the steps on how to flash Lollipop? I already have the necessary files to begin with. Thanks!
jelmerpeligrino said:
What are the steps on how to flash Lollipop? I already have the necessary files to begin with. Thanks!
Click to expand...
Click to collapse
Make sure you've a good backup. Nd also you've Samsung USB drivers already installed in your PC.
Power off your device nd boot in download mode by pressing Volume Down + Home + Power Buttons together.
Then open Odin nd connect your phone to PC via data cable nd press volume Up key on phone, then if it shows you "Added" in Odin you're good to go.
Select the AP option nd select the firmware which you've downloaded. Now it'll take some time to verify the md5 as depending upon the speed of your PC. Once it has verified you'll be able to click on other options. So now you've to click on Start nd make sure you don't move your device or the connection doesn't cut off or your device might get hard bricked.
That's it, the flashing time would be about 4-5 minutes. After it is flashed the phone will reboot nd now you can factory reset the device properly for a clean new device.
I've told everything you needed to know.
Enjoy!
Has.007 said:
As @waleeds1 said, No. But I recommend you to take backup of all your data nd do a factory reset after you flash Lollipop firmware.
That way you won't get any lags or performance glitches.
Click to expand...
Click to collapse
The thing you said is correct but I recommend first start your phone without factory reseting @jelmerpeligrino becuase if u dont face any performance or other issues. But if u wish to factory then its still a good choice
waleeds1 said:
The thing you said is correct but I recommend first start your phone without factory reseting @jelmerpeligrino becuase if u dont face any performance or other issues. But if u wish to factory then its still a good choice
Click to expand...
Click to collapse
Yes I told that in my second post.
Actually I believe he has been using Kitkat from a long time nd for most of the apps, the things have changed. The API differences creates certain problems as it is recommended by Samsung itself to factory reset the device after Android version change.
From Kitkat to Kitkat nd Lollipop to Lollipop factory reset is not needed but for SDK changing it is needed.
Has.007 said:
Yes I told that in my second post.
Actually I believe he has been using Kitkat from a long time nd for most of the apps, the things have changed. The API differences creates certain problem as it is recommended by Samsung itself to factory reset the device after Android version change.
From Kitkat to Kitkat nd Lollipop to Lollipop factory reset is not needed but for SDK changing it is needed.
Click to expand...
Click to collapse
I didnt read that part. U got a point there mate.
Hi, I've roote my Galaxy grand prime successfully and want to upgrade to Lollipop but it doesn't work, I've tried already several files but it always ends with an error
here is the Odin Log:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
What can I do to make i happen
Happy new year to all of you
woris said:
Hi, I've roote my Galaxy grand prime successfully and want to upgrade to Lollipop but it doesn't work, I've tried already several files but it always ends with an error
here is the Odin Log:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
What can I do to make i happen
Happy new year to all of you
Click to expand...
Click to collapse
Did you download the correct firmware and are you using ap in odin if nor then you should use ap and browse for the firmware.
waleeds1 said:
Did you download the correct firmware and are you using ap in odin if nor then you should use ap and browse for the firmware.
Click to expand...
Click to collapse
Thanks for your reply, yes, I've got the correct Firmware, correct Odin settings, I even tried the Kasachstan firmware that you used but same result.
Has.007 said:
Yes I told that in my second post.
Actually I believe he has been using Kitkat from a long time nd for most of the apps, the things have changed. The API differences creates certain problems as it is recommended by Samsung itself to factory reset the device after Android version change.
From Kitkat to Kitkat nd Lollipop to Lollipop factory reset is not needed but for SDK changing it is needed.
Click to expand...
Click to collapse
Is this normal bro? I flashed it already.
waleeds1 said:
Did you download the correct firmware and are you using ap in odin if nor then you should use ap and browse for the firmware.
Click to expand...
Click to collapse
woris said:
Thanks for your reply, yes, I've got the correct Firmware, correct Odin settings, I even tried the Kasachstan firmware that you used but same result.
Click to expand...
Click to collapse
No you don't have the right firmware for your device. The baseband difference. Post a screenshot from your About Phone nd also the link of firmware you're trying to flash.
jelmerpeligrino said:
Is this normal bro? I flashed it already.
Click to expand...
Click to collapse
Yes it is normal, It is weird tho how you've two devices connected. Or maybe there's some bug in this version of Odin. Anyways all working good?
Has.007 said:
No you don't have the right firmware for your device. The baseband difference. Post a screenshot from your About Phone nd also the link of firmware you're trying to flash.
Yes it is normal, It is weird tho how you've two devices connected. Or maybe there's some bug in this version of Odin. Anyways all working good?
Click to expand...
Click to collapse
So far, it was good. The performance is better now compared to Kitkat and and the sluggishness was gone. Thanks bro!
Btw, do you have any Marshmallow ROM for this device?
Hello. Here is my first post. So if sth is not clear tell me to add it.
I have a galaxy note 4 N910G. When the message for update came i accepted. The update was downloaded but then the problems started. Phone closed and didn't opened again. i waited for half an hour but nothing. So i searched on internet for what to do. I removed the battery and bla bla. The phone opened and the screen said Could not do normal boot. etc. When i go to perform a hard reset or soft reset it works but. The phone opens at the old version and it is really slow than ever. Also the phone after this can't perform a restart or if i shut it down i have to remove the battery and press the power button one minute and then i put the battery and it works but really really slow. When i hit on the settings for a reset the phone closes and don't open again. Also when i hit update software it says that failed to communicate to server try again when the phone is connected to a working wifi.
Flashing the stock rom again is not possible odin and kies report faults. Any ideas? How to have my phone back again? Maybe root the phone?
Thank you.
Download a firmware from sammobile flash from odin note flash with the latest update
Sent from my SM-G800F using Tapatalk
ferouzferzkassim said:
Download a firmware from sammobile flash from odin note flash with the latest update
Sent from my SM-G800F using Tapatalk
Click to expand...
Click to collapse
How to download from sammobile? I have to pay?
Because it's really slow.
Can i find it somewhere to download it faster?
I have tried to flash a rom but odin says some faults and continue the procedure
michael.chania said:
How to download from sammobile? I have to pay?
Because it's really slow.
Can i find it somewhere to download it faster?
I have tried to flash a rom but odin says some faults and continue the procedure
Click to expand...
Click to collapse
Can u send the log we see evn detailed pictures andd u may also try tsar3000.com they also have good repair firmware
Sent from my SM-G800F using Tapatalk
ferouzferzkassim said:
Can u send the log we see evn detailed pictures andd u may also try tsar3000.com they also have good repair firmware
Sent from my SM-G800F using Tapatalk
Click to expand...
Click to collapse
When you say the log what do you mean exactly?
I searched at the sit you suggested me. I started downloading one version
but my phone says it is from Singapore but there is no version for Singapore.
I started downloading N910G India. Is this ok?
I forgot to mention that someone maybe tried to root the phone but that failed.
Because this phone is not mine it's my cousin's i don't know what exactly happened.
Provided it is same biuld number like n910g it doesnt matrr
Sent from my SM-G800F using Tapatalk
ferouzferzkassim said:
Provided it is same biuld number like n910g it doesnt matrr
Sent from my SM-G800F using Tapatalk
Click to expand...
Click to collapse
And after i download the file what should i do?
What is the right way for the phone to get this iso?
Thanks
michael.chania said:
And after i download the file what should i do?
What is the right way for the phone to get this iso?
Thanks
Click to expand...
Click to collapse
Download odin install drivers samsung drivers and thn put phone in download mode with volumedown and power plus home conect phone to pc then flash using odin
Sent from my SM-G800F using Tapatalk
Now the phone is working completely. I installed normally the software and it seems ok. Meanwhile when i have some multitasking the phone seems to freak out. The screen is going off and after secs again on.
Is there something i can do or this normal for this phone?
Thanks a lot
Problem again. When i installed the rom the phone gave me a notification for an update for improvement of performance and bugs.
I accepted because the phone was really slow. After that i accepted to install the update then the phone closes the update is installed and when it finished the phone closed and not opened again after waiting for half an hour. when i tryied to open it the phones starts to install the same update again but the same the phones shuts down. I tried to flash again the rom and here is the log of the odin:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Write)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
What can i do?
SAVE ME!!!
michael.chania said:
What can i do?
SAVE ME!!!
Click to expand...
Click to collapse
mate, have a look at my post which can be a solution for you
https://forum.xda-developers.com/note-4/help/fixed-note-4-n910g-emmc-start-normal-t3856903
Hey Guys,
Edit
So it turns out you can't even flash the Canadian S7 to Tmobile's firmware. I installed the super stock rom and it started working again. I am not on the official Tmobile modem but I get service and WiFi calling so no biggie.
/Edit
This is driving me crazy. I bought the Canadian version of the S7 edge so I can put TWRP on it but I can't use odin on it. (SM-G935W8) Well at least I can't put the Tmobile files on it. Has anyone been able to do it successfully? I really need help, I'm losing my marbles, thanks guys!
I can't flash my appropriate radio so I can't get any service.
This is the error I get whenever I try to flash the radio.
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> modem.bin
<ID:0/003> Transmission Complete..
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> RQT_CLOSE !!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Did you make sure the oem unlock is on?
gurnsey101 said:
Did you make sure the oem unlock is on?
Click to expand...
Click to collapse
Made sure OEM unlock was checked and USB Debugging was off. I am using the phone right now but I am not on USA radio so my service is not that great but I have WiFi calling so I am making due right now.
You need to ask in the section for your phone, not the software you want to load.
Try this:
https://forum.xda-developers.com/s7-edge/help/samsung-sm-g935f-sm-g935w8-rom-t3414612
joe3681 said:
You need to ask in the section for your phone, not the software you want to load.
Try this:
https://forum.xda-developers.com/s7-edge/help/samsung-sm-g935f-sm-g935w8-rom-t3414612
Click to expand...
Click to collapse
It's not software, it's the radio and bootloader. That thread had no information related to my problem? Maybe I missed something? Thank you for your time.
Well, you're trying to load TMobile software onto hardware with a different bootloader than the TMobile version has so...
joe3681 said:
Well, you're trying to load TMobile software onto hardware with a different bootloader than the TMobile version has so...
Click to expand...
Click to collapse
I'm not sure if you're trolling or not but I am NOT trying to install TMobile software. I am trying to install the radio from USA. I have done it before but for some reason this phone keeps giving me an error through Odin. I thought maybe someone knew of a way to sideload the radio. I searched and found fastboot but I cannot load up fastboot through my S7, I think they removed that feature? Anyway, in case you really aren't trolling you can install a radio that is not from your region as long as you have an unlocked bootloader (which I have now).
*Edit I installed the Tmobile CSC so I'm not sure why you're still hung up on Tmobile software
Your first post mentions twrp, then you mention files, then at the end radio so excuse me for not knowing which one of these you're inquiring about...
Don't get smart if someone is trying to help you and not understanding what your asking cause your OP is a cluster **** to make heads or tails of...
joe3681 said:
Your first posts and **** twrp, then you mention files, then at the end radio.
Don't get smart if someone is trying to help you and not understanding what your asking cause your post is a cluster **** to make heads or tails of.
Click to expand...
Click to collapse
I didn't mean to have an attitude sorry about that. I'm just frustrated because I feel like I am missing something, thank you for your help.
You got it now or no?
Have you tried the CP too which is the modem
joe3681 said:
You got it now or no?
Have you tried the CP too which is the modem
Click to expand...
Click to collapse
Not yet. I was able to restore the phone back to everything stock using Kies but I am still on the Canadian modem. I can actually get service now but now my main issue is I cannot use Samsung Pay since the radios do not match. I wonder if I get a Tmobile S7 edge serial number I can restore it with Kies?