Hi, this is the first time i post something in this forum. First I want to say sorry for my bad english and second, here is my BIG problem:
I just purchased a Galaxy S4 I337 for AT&T. I have to say that I don't understand very much about rooting and modding. The thing is that I tried to root this phone and then I can't do nothing with it. I only can enter into the odin mode.
I tried to unroot and reinstall the Stock Factory Rom that I already donwloaded from sammobile and I used Odin 3.04 and 3.07 versios and in both fail the operation and in both happen the same thing:
ODIN said:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDB_I337ATTAMDB_I337UCUAMDB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
and the phone said:
ODIN MODE
PRODUCT NAME: SGH-I337
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: CUSTOM
CSB-CONFIG-LSB: 0X30
WRITE PROTECTION: ENABLE
START [224, 1440]
SW REV. CHECK FAIL : FUSED : 2 , BINARY : 1
and this is it.
Any ideas to fix this problem?
I will appreciate any suggestion.
I attached 2 pics.
You have mf3 firmware on your phone. Odin won't work. I'd take it to bestbuy with a Samsung experience. They can flash the mf3 firmware.
http://forum.xda-developers.com/showthread.php?p=45359306
jd1639 said:
You have mf3 firmware on your phone. Odin won't work. I'd take it to bestbuy with a Samsung experience. They can flash the mf3 firmware.
http://forum.xda-developers.com/showthread.php?p=45359306
Click to expand...
Click to collapse
/\ /\ /\ /\
what this man said...
thank you!
xBeerdroiDx said:
/\ /\ /\ /\
what this man said...
Click to expand...
Click to collapse
So do you think that this is covered by warranty or something?
THANK YOU!!!
jd1639 said:
You have mf3 firmware on your phone. Odin won't work. I'd take it to bestbuy with a Samsung experience. They can flash the mf3 firmware.
http://forum.xda-developers.com/showthread.php?p=45359306
Click to expand...
Click to collapse
So do you think that this problem that I caused is covered by warranty???
cemanue said:
So do you think that this problem that I caused is covered by warranty???
Click to expand...
Click to collapse
Read the link I gave you. That may give you some ideas on how to handle your situation.
cemanue said:
So do you think that this problem that I caused is covered by warranty???
Click to expand...
Click to collapse
As the posted link will tell you - they shouldn't give you any problems with this unless you've got huge indicators you voided your warranty.
FIXED!!!!
Hi again!
I did the thing that you told me and the phone is already fixed!!! it has all factory settings. Thank you guys!
My question is, i can't root this phone right now? it is impossible? I have to wait for another method?
cemanue said:
Hi again!
I did the thing that you told me and the phone is already fixed!!! it has all factory settings. Thank you guys!
My question is, i can't root this phone right now? it is impossible? I have to wait for another method?
Click to expand...
Click to collapse
You can root it. You can't put on a custom recovery. Look up safestrap, it will allow you to use custom roms
How has your phone repaired?
jd1639 said:
You have mf3 firmware on your phone. Odin won't work. I'd take it to bestbuy with a Samsung experience. They can flash the mf3 firmware.
http://forum.xda-developers.com/showthread.php?p=45359306
Click to expand...
Click to collapse
I took mine to best buy, and none of them seem to know how to fix it... complete utter morons, if you wil; not generallyl. They don't even know what a firmware was, and tried Kies to fix it....really?!! So far it may be only for certain best buy locations, because surely this one in CA certainly doesn't.
By the way, if anyone has found a solution, I need urgent help. I have the same problem as the poster... NAND Write Fail, certainly a type of Bricked.
ernestriderxx said:
I took mine to best buy, and none of them seem to know how to fix it... complete utter morons, if you wil; not generallyl. They don't even know what a firmware was, and tried Kies to fix it....really?!! So far it may be only for certain best buy locations, because surely this one in CA certainly doesn't.
By the way, if anyone has found a solution, I need urgent help. I have the same problem as the poster... NAND Write Fail, certainly a type of Bricked.
Click to expand...
Click to collapse
If you're on mk2 firmware you need this http://forum.xda-developers.com/showthread.php?p=49687770
There's something similar for mf3. Google i337 mf3 tar files xda
Related
For two days i have been struggling to root my new Orange Romania N9005.
First of all I downloaded CF Auto Root and Odin 3.09. Followed the steps exactly (i'm not new to rooting) ,Uninstalled Kies and downloaded the latest drivers only, and every single time I try to root it Odin gives the following error:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-hlte-hltexx-smn9005.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On the screen of the note 3 the following error in red : SECURE CHECK FAIL : recovery
I have since tried every single version of ODIN , tried flashing pre-rooted roms only to get my device soft bricked(Fails right at the very end, and then I restored via kies )
,I have tried to change usb ports to no avail, even tried to root it on 4 different laptops.Tried with different cables, with usb debugging on and off, NOTHING WORKS!!!
Please help me I am thinking of setting it on fire!!!
Try install Kies and try again...
/CK
tried with old kies and kies 3 as well.Also tried older drivers.
Do i have a locked BootLoader?This shouldnt be the case as it is an n9005.
Any way to check if bootloader is locked and if so any way to unlock it for the international version?
Thanks!
No one?
Doesn't any one know how to help?Don't know where else to ask.
NavDragan said:
Doesn't any one know how to help?Don't know where else to ask.
Click to expand...
Click to collapse
On the settings page under security..make sure you have reactivation lock uncheck...
Than try again..that's usually the problem
Sent from [email protected] Ass Note III SM-N9005
NavDragan said:
For two days i have been struggling to root my new Orange Romania N9005.
First of all I downloaded CF Auto Root and Odin 3.09. Followed the steps exactly (i'm not new to rooting) ,Uninstalled Kies and downloaded the latest drivers only, and every single time I try to root it Odin gives the following error:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-hlte-hltexx-smn9005.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On the screen of the note 3 the following error in red : SECURE CHECK FAIL : recovery
I have since tried every single version of ODIN , tried flashing pre-rooted roms only to get my device soft bricked(Fails right at the very end, and then I restored via kies )
,I have tried to change usb ports to no avail, even tried to root it on 4 different laptops.Tried with different cables, with usb debugging on and off, NOTHING WORKS!!!
Please help me I am thinking of setting it on fire!!!
Click to expand...
Click to collapse
I had the same issue while rooting my Galaxy S4,tried on every other laptop,different ports,cables and more but then I realized I was using the wrong file.
Yes,the international version comes with Bootloader unlocked so your bootloader is fine.Are you able to boot your phone into Download mode?I am sure u cant boot into Recovery mode,can you?
First go back and check your phone's model no and use the proper file and try again!I will help you,dont worry!
I deactivated the reactivation lock but still the same problem.I have Downloaded the CF-Auto-Root-hlte-hltexx-smn9005.tar file several times same thing every time.My last chance is doing a full wipe of the system and then trying again.I hope orange Romania CSC does't have some sort of security block.
Frustrating thing is the phone is fully functional so i cannot ask for a replacement.And even after the dozens of failed flash attempts it still reads 0x0.
YES!!!Finally.A full wipe did it.!Thank you for your interest in helping me.
iznee said:
On the settings page under security..make sure you have reactivation lock uncheck...
Than try again..that's usually the problem
Sent from [email protected] Ass Note III SM-N9005
Click to expand...
Click to collapse
Thanks that helped! Unlike the OP didnt have to wipe phone.
Thank youu
nsnarayan10 said:
I had the same issue while rooting my Galaxy S4,tried on every other laptop,different ports,cables and more but then I realized I was using the wrong file.
Yes,the international version comes with Bootloader unlocked so your bootloader is fine.Are you able to boot your phone into Download mode?I am sure u cant boot into Recovery mode,can you?
First go back and check your phone's model no and use the proper file and try again!I will help you,dont worry!
Click to expand...
Click to collapse
THank you soo much after following exact instruction that you gave i finally got it rooted!! Thank you!!
nsnarayan10 said:
I had the same issue while rooting my Galaxy S4,tried on every other laptop,different ports,cables and more but then I realized I was using the wrong file.
Yes,the international version comes with Bootloader unlocked so your bootloader is fine.Are you able to boot your phone into Download mode?I am sure u cant boot into Recovery mode,can you?
First go back and check your phone's model no and use the proper file and try again!I will help you,dont worry!
Click to expand...
Click to collapse
thanks for bringing this up.
so where do you get the proper file?
i have the same problem, and a full wi[e has not helped here..
kindly give the correct link.
thanks once again
Before you wanna flash. Don't forget to uncheck reactivation lock, put off your external sd card. And look carefully for your modem and radio. Don't switch with the another kernel before official launch comes.
Sent from my CruelB Note 3 SM-N9005 Snapdragon 800 using Tapatalk
Cruel B said:
Before you wanna flash. Don't forget to uncheck reactivation lock, put off your external sd card. And look carefully for your modem and radio. Don't switch with the another kernel before official launch comes.
Sent from my CruelB Note 3 SM-N9005 Snapdragon 800 using Tapatalk
Click to expand...
Click to collapse
h guys!
i asked for 'the propper files' link?...
my phone now entres boot-loop when i restart it. any help?
...after several loops, it finally completes start up. by now i'd have left it alone for about 15 mins!
tanks, in advance..
---------- Post added at 03:22 PM ---------- Previous post was at 02:51 PM ----------
aidelnma said:
THank you soo much after following exact instruction that you gave i finally got it rooted!! Thank you!!
Click to expand...
Click to collapse
h guys!
i asked for 'the propper files' link?...
my phone now entres boot-loop when i restart it. any help?
...after several loops, it finally completes start up. by now i'd have left it alone for about 15 mins!
tanks, in advance..
THANK YOU!
Yes, the reactivation lock did it for me too. I was stuck at exactly the same point and couldn't think of why, and this didn't even come to mind. In fact, I forgot that I even did that, but it worked. !!!
nsnarayan10 said:
I will help you,dont worry!
Click to expand...
Click to collapse
Help please, I have a (Note 3) SM-N900V on JSS15J.N900VVRUBMJE.
I bought it on Jan 12th ish, and took the firmware update as soon as I saw it because of some reading I had done.... shouldn't have done that I guess.
I am still totally unable to root this thing, Kingo, Odin v3.0.9. I am willing to do w/e (go back to older firmware even if possible)
I know there are no guarantees in this attempt, and would not hold you to anything, I have rooted every other android I have had and am very familiar with the process, any help you can offer would be greatly appreciated
https://plus.google.com/u/0/+JoelJrMcCracken/
This has helped. Thanks a lot.
iznee said:
On the settings page under security..make sure you have reactivation lock uncheck...
Than try again..that's usually the problem
Sent from [email protected] Ass Note III SM-N9005
Click to expand...
Click to collapse
This helped a lot. Problem fixed.
regards
iznee said:
On the settings page under security..make sure you have reactivation lock uncheck...
Than try again..that's usually the problem
Sent from [email protected] Ass Note III SM-N9005
Click to expand...
Click to collapse
Thanks. 1.5 years later and this helped me too!
iznee said:
On the settings page under security..make sure you have reactivation lock uncheck...
Than try again..that's usually the problem
Sent from [email protected] Ass Note III SM-N9005
Click to expand...
Click to collapse
U sir are a life saver!
Thanks!
iznee said:
On the settings page under security..make sure you have reactivation lock uncheck...
Than try again..that's usually the problem
Sent from [email protected] Ass Note III SM-N9005
Click to expand...
Click to collapse
Thank you, you saved me from pulling my hair out :highfive:
Hello to all.
I have a Tab 3 (that was given to me)on Software version T217SVPUBOH1
Hardware Version T217S.04
Model Number SM-TS17S
Android Ver: 4.4.2
Baseband T217SVPUBOH1
I guess Stock Kernel 3.4.0-1715729
Build Number KOT49H.T217SVOUBOH1
Could Someone direct me to the PROPER CF Auto Root and Odin? I am not planning on changing the ROM, I just want to Add Viper to increase the Audio Volume and maybe some other root controls.
Any and All Help Is Appreciated
Thank you in Advance
Blessings
Thank a lott!!!already rooted!!!!
Hello there,
I have looked through the forums and have attempted various different tutorials on how to un-root and flash back to the stock firmware. I am with Rogers Wireless (Canada), and have downloaded Odin and N900W8VLUBMI5_N900W8OYABMI5_RWC which is the rogers firmware for my device. Every time I connect my device to Odin in download mode, select PDA / AP, I get an error log with the following:
Code:
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N900W8VLUBMI5_N900W8OYABMI5_N900W8VLUBMI5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On the phone itself, I see:
"SW REV CHECK FAIL: [sb1]Fused 2 > Binary 1"
I cannot seem to flash it, no matter what I do.
Any help is appreciated, I would really like to flash back to the stock firmware and remove root. Thank you.
bustin.droid said:
...
On the phone itself, I see:
"SW REV CHECK FAIL: [sb1]Fused 2 > Binary 1"
I cannot seem to flash it, no matter what I do.
Any help is appreciated, I would really like to flash back to the stock firmware and remove root. Thank you.
Click to expand...
Click to collapse
You are currently on a newer firmware (you can check it in Settings/About or with *#1234# ). You are on a new bootloader and you will not be able to return to an older firmware. Check your knox status - if that is 0x1 you will also never be able to make it back to 0x0. Read around for more info (but generally you should be able to write the latest ROM from your carrier, and that should also remove root).
xclub_101 said:
You are currently on a newer firmware (you can check it in Settings/About or with *#1234# ). You are on a new bootloader and you will not be able to return to an older firmware. Check your knox status - if that is 0x1 you will also never be able to make it back to 0x0. Read around for more info (but generally you should be able to write the latest ROM from your carrier, and that should also remove root).
Click to expand...
Click to collapse
Thank you for the reply,
I see that knox is set to 0x1, doh. Where would I be able to find / download the same / latest firmware for my Rogers Wireless Note 3?
Edit: Found it, thank you. So there will NEVER be a way to trip knox back to 0x0?
bustin.droid said:
Thank you for the reply,
I see that knox is set to 0x1, doh. Should I be able to download the latest firmware from the Rogers website?
Click to expand...
Click to collapse
I don't know about Rogers, but for instance you can look here:
http://www.sammobile.com/firmwares/1/?model=SM-N900W8&pcode=RWC#firmware
There is also another option that might also work - with Kies 3 using Tools -> Emergency firmware recovery - but I believe you might need the latest Kies version and even that one might not work. (I consider that one a little safer only in the fact that if something very bad happens you might get away with free service on it by saying Kies created the problem, while saying that you bricked the phone in Odin will guarantee that service will NOT be covered by warranty).
xclub_101 said:
You are currently on a newer firmware (you can check it in Settings/About or with *#1234# ). You are on a new bootloader and you will not be able to return to an older firmware. Check your knox status - if that is 0x1 you will also never be able to make it back to 0x0. Read around for more info (but generally you should be able to write the latest ROM from your carrier, and that should also remove root).
Click to expand...
Click to collapse
i had the same thing when i flashed the 4.4.2 into hongkong one, same happened and it is stuck,
i cant flash either 4.4.2 not hongkong,
any ideas with thanks.
xclub_101 said:
I don't know about Rogers, but for instance you can look here:
http://www.sammobile.com/firmwares/1/?model=SM-N900W8&pcode=RWC#firmware
There is also another option that might also work - with Kies 3 using Tools -> Emergency firmware recovery - but I believe you might need the latest Kies version and even that one might not work. (I consider that one a little safer only in the fact that if something very bad happens you might get away with free service on it by saying Kies created the problem, while saying that you bricked the phone in Odin will guarantee that service will NOT be covered by warranty).
Click to expand...
Click to collapse
your right, kies does helps, but was wondering can we blame kies for the 0x1 when flashing back to stock if we do a warrenty exchange through the carrier? haha
After I flashed Poland 4.4.2 rom I lost my warranty and Knox now 0×1. ANY ideas how to fix it.
Sent from my SM-N9005 using XDA Premium 4 mobile app
need help quick! im trying to flash stock through odin, did not have custom recovery and it gets near and and says FAIL! ext4 hidden image hellpppppp
MarkDyer1 said:
need help quick! im trying to flash stock through odin, did not have custom recovery and it gets near and and says FAIL! ext4 hidden image hellpppppp
Click to expand...
Click to collapse
Add some screenshots about in ODIN.
im really scared man. i downloaded stock from sam mobile note 3 sm n9005 LTE and followed everything!
Joku1981 said:
Add some screenshots about in ODIN.
Click to expand...
Click to collapse
and again using different odin, i really need help, i tried loads
MarkDyer1 said:
and again using different odin, i really need help, i tried loads
Click to expand...
Click to collapse
Did you have Lollipop before?
Joku1981 said:
Did you have Lollipop before?
Click to expand...
Click to collapse
no, im flashing kit kat which i had before, i only rooted it once and then wanted to unroot, no roms, im UK with EE so dont think i had lolipop
Joku1981 said:
Did you have Lollipop before?
Click to expand...
Click to collapse
do you know what it is? can i fix it??? i really scared, youve replied to one of my oither threads and im scared, i just want to fix this
Joku1981 said:
Did you have Lollipop before?
Click to expand...
Click to collapse
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUGNG1_N9005EVRGNH2_N9005XXUGNG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> sbl1.mbn
<ID:0/008> NAND Write Start!!
<ID:0/008> aboot.mbn
<ID:0/008> rpm.mbn
<ID:0/008> tz.mbn
<ID:0/008> sdi.mbn
<ID:0/008> NON-HLOS.bin
<ID:0/008> boot.img
<ID:0/008> recovery.img
<ID:0/008> system.img.ext4
<ID:0/008> modem.bin
<ID:0/008> cache.img.ext4
<ID:0/008> hidden.img.ext4
<ID:0/008> FAIL! (Ext4)
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
is what odin says
Calm down mate, I know its hard, but that's what you need to do.
Now for that error, its absolutely normal. I have had the exact same error! I mean I still don't know why! I downloaded the German LP ROM and tried to flash it, and it failed, then I downloaded the Polish LP ROM and it flashed successfully. I was certain that the German ROM is meant for 16 GB devices, and as mine is 32 GB it would not flash, but then someone came and said there are no 16 GB models of Note 3 in Europe! Well if that's true then I don't know what's wrong!
So I guess you need to download the Polish LP ROM, and flash it. It should not fail.
devilsdouble said:
Calm down mate, I know its hard, but that's what you need to do.
Now for that error, its absolutely normal. I have had the exact same error! I mean I still don't know why! I downloaded the German LP ROM and tried to flash it, and it failed, then I downloaded the Polish LP ROM and it flashed successfully. I was certain that the German ROM is meant for 16 GB devices, and as mine is 32 GB it would not flash, but then someone came and said there are no 16 GB models of Note 3 in Europe! Well if that's true then I don't know what's wrong!
So I guess you need to download the Polish LP ROM, and flash it. It should not fail.
Click to expand...
Click to collapse
I'm not polish though? I'm Uk on EE which I the stock I tried to flash ? But I can fix this right?
MarkDyer1 said:
I'm not polish though? I'm Uk on EE which I the stock I tried to flash ? But I can fix this right?
Click to expand...
Click to collapse
And I am an Indian :laugh:
No, seriously it doesn't matter what ROM you are flashing regardless of where you are. Yes, you should be able to fix that, at least that's what happened with me, so you shouldn't be any exception, I think.
MarkDyer1 said:
I'm not polish though? I'm Uk on EE which I the stock I tried to flash ? But I can fix this right?
Click to expand...
Click to collapse
This seems problem of the pc or the USB cable/port. Try others.
Joku1981 said:
This seems problem of the pc or the USB cable/port. Try others.
Click to expand...
Click to collapse
Um, I am inclined to say this is wrong mate.
devilsdouble said:
Um, I am inclined to say this is wrong mate.
Click to expand...
Click to collapse
Maybe you can give a better solution coz Im reading your posts in this thread and... anything :fingers-crossed:
devilsdouble said:
And I am an Indian :laugh:
No, seriously it doesn't matter what ROM you are flashing regardless of where you are. Yes, you should be able to fix that, at least that's what happened with me, so you shouldn't be any exception, I think.
Click to expand...
Click to collapse
But then it'll be in weird language? I won't understand any of it and apparently if you put wrong country or carrier on the sim can't tell the phone where to look for satellites to send texts and Internet ect
No it won't be in a weird language. I have flashed the Polish LP and the only way I can tell is that there were a couple of bloat ware apps in Polish.
And any carrier info about SMS etc us on the SIM (as you say and will not be affected by flashing the ROM.
I don't want to be nasty, but if you're this nervous about things then maybe you should stay away from experimenting in until you've read up a bit on it. I once this is fixed.
Sent from my SM-P605 using Tapatalk 4
Try also connecting the cable on a different usb port and also try a different cable if it still fails.
Also if your gonna flash polish lollipop once its finish the first screen will be the choose your language selection then once selected everything will be changed to that language.
Happened to me once but first it was the usb port not supplying enough power so changed it to the back usb port then got at least 50% then failed again and finally replaced my usb cable and was successful.
Check settings-- security...if theres a reactivion lock option..make sure its disabled...it is there on the note 4 and note edge...not sure if itsthere on note 3..but check anyway...if not, maybe something as simple as a different cable and diff USB port may help
Sent from my VZW LG G2
mrao said:
Check settings-- security...if theres a reactivion lock option..make sure its disabled...it is there on the note 4 and note edge...not sure if itsthere on note 3..but check anyway...if not, maybe something as simple as a different cable and diff USB port may help
Sent from my VZW LG G2
Click to expand...
Click to collapse
I can't get on my note 3,it only goes into download mode, why are people thinking its computer or cable?
Because computer usb ports and a busted cable are common reasons fir odin to fail....also make sure samsung kies, if installed, is not running...if you can only get to download mode...all you can do us try flashing stock firnware....or try flashing twrp with auto-reboot unchecked....and then manually reboot to twrp...push a rom and flash it
Sent from my VZW LG G2
Hi everyone, i have tried to root my galaxy s5 SM-G900F but i have used wrong root for SM-G900P and ended up with this message and is stuck in logo screen
recovery booting.....
recovery is not seandroid enforcing
set warranty bit : recovery
and i have used the right root also but the same problem, my phone now is working but the recovery mode won't load it show me the same message and logo screen stuck and i have problem with system shut down when level battery is 20%
i tried to install stock rom and i download the right rom i think
the rom Baseband : G900FXXU1ANCE
my phone Baseband : G900FVPU1AND2
i used odin version : 3.10.7
its fail and shows this :
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1100)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> aboot.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and in my downloading mode from my phone screen shows this : secure check fail : aboot
so i have tried everything to get my phone fixed but nothing same problem so please help me
Check in download mode, which model S5 it says
*Detection* said:
Check in download mode, which model S5 it says
Click to expand...
Click to collapse
it says product name : SM-G900P
current binary: custom
system status: custom
knox warranty void: 0x1 (3)
Your S5 is the G900P then, not the G900F
Lots of S5s have been falsely labelled like this, even firmware states G900F, download mode is correct
*Detection* said:
Your S5 is the G900P then, not the G900F
Lots of S5s have been falsely labelled like this, even firmware states G900F, download mode is correct
Click to expand...
Click to collapse
so what should i do to get my phone un brick
Try flashing a G900P ROM from sammobile with ODIN
*Detection* said:
Try flashing a G900P ROM from sammobile with ODIN
Click to expand...
Click to collapse
ok i will try but im afraid to cause damage to my phone like a hard brick or something gos wrong
abdou royal said:
ok i will try but im afraid to cause damage to my phone like a hard brick or something gos wrong
Click to expand...
Click to collapse
you take us for liars !!!!
and you who flash wrong roms :silly:
abdou royal said:
ok i will try but im afraid to cause damage to my phone like a hard brick or something gos wrong
Click to expand...
Click to collapse
You already bricked it, that's why you're here
*Detection* said:
You already bricked it, that's why you're here
Click to expand...
Click to collapse
yes i did, and i am grateful for the help i will try flashing the G900P rom
it just wondering why that model number in the back my phone is G900F and in the system also on the contrary is G900P in downloading mode
abdou royal said:
yes i did, and i am grateful for the help i will try flashing the G900P rom
it just wondering why that model number in the back my phone is G900F and in the system also on the contrary is G900P in downloading mode
Click to expand...
Click to collapse
G900F is more popular, sells better, falsely label and sell more units, most likely
*Detection* said:
G900F is more popular, sells better, falsely label and sell more units, most likely
Click to expand...
Click to collapse
I did not think so, now I understand thnx again , so when i flash it to G900P it is probably to get locked from recognized the card sim !?
abdou royal said:
I did not think so, now I understand thnx again , so when i flash it to G900P it is probably to get locked from recognized the card sim !?
Click to expand...
Click to collapse
Shouldn't affect the SIM lock at all
*Detection* said:
Shouldn't affect the SIM lock at all
Click to expand...
Click to collapse
yes i did flash it by G900P stock rom its worked my phone unbricked thanx for ur support :fingers-crossed:
abdou royal said:
yes i did flash it by G900P stock rom its worked my phone unbricked thanx for ur support :fingers-crossed:
Click to expand...
Click to collapse
Good stuff
My sister's phone is Galaxy Grand Prime and still running Android 4.4.4. I've searched over the net and there is Lollipop update already for some countries. There's still no update here in the Philippines. Can I update this device using firmwares from other countries? Thanks!
jelmerpeligrino said:
My sister's phone is Galaxy Grand Prime and still running Android 4.4.4. I've searched over the net and there is Lollipop update already for some countries. There's still no update here in the Philippines. Can I update this device using firmwares from other countries? Thanks!
Click to expand...
Click to collapse
yes you can! i'm also from the philippines and i'm currently on the Russian firmware (G530HXXUBOH5)
@jelmerpeligrino Post a screenshot of your About Phone. @morgannoobman That is a really old firmware.
Has.007 said:
@jelmerpeligrino Post a screenshot of your About Phone. @morgannoobman That is a really old firmware.
Click to expand...
Click to collapse
Here bro.
morgannoobman said:
yes you can! i'm also from the philippines and i'm currently on the Russian firmware (G530HXXUBOH5)
Click to expand...
Click to collapse
How did you do it?
jelmerpeligrino said:
Here bro.
Click to expand...
Click to collapse
Download this firmware nd the mention me. Also download Odin 3.10.xx
http://www.sammobile.com/firmwares/download/106519/G530HXCU1BPI2_G530HUUB1BPI1_TTT/
Has.007 said:
Download this firmware nd the mention me. Also download Odin 3.10.xx
http://www.sammobile.com/firmwares/download/106519/G530HXCU1BPI2_G530HUUB1BPI1_TTT/
Click to expand...
Click to collapse
If I flashed Lollipop on this device, all data stored on my device will be deleted?
And I searched the latest version of odin, it is now 3.12.3.
jelmerpeligrino said:
If I flashed Lollipop on this device, all data stored on my device will be deleted?
And I searched the latest version of odin, it is now 3.12.3.
Click to expand...
Click to collapse
No
jelmerpeligrino said:
If I flashed Lollipop on this device, all data stored on my device will be deleted?
And I searched the latest version of odin, it is now 3.12.3.
Click to expand...
Click to collapse
As @waleeds1 said, No. But I recommend you to take backup of all your data nd do a factory reset after you flash Lollipop firmware.
That way you won't get any lags or performance glitches.
Has.007 said:
As @waleeds1 said, No. But I recommend you to take backup of all your data nd do a factory reset after you flash Lollipop firmware.
That way you won't get any lags or performance glitches.
Click to expand...
Click to collapse
What are the steps on how to flash Lollipop? I already have the necessary files to begin with. Thanks!
jelmerpeligrino said:
What are the steps on how to flash Lollipop? I already have the necessary files to begin with. Thanks!
Click to expand...
Click to collapse
Make sure you've a good backup. Nd also you've Samsung USB drivers already installed in your PC.
Power off your device nd boot in download mode by pressing Volume Down + Home + Power Buttons together.
Then open Odin nd connect your phone to PC via data cable nd press volume Up key on phone, then if it shows you "Added" in Odin you're good to go.
Select the AP option nd select the firmware which you've downloaded. Now it'll take some time to verify the md5 as depending upon the speed of your PC. Once it has verified you'll be able to click on other options. So now you've to click on Start nd make sure you don't move your device or the connection doesn't cut off or your device might get hard bricked.
That's it, the flashing time would be about 4-5 minutes. After it is flashed the phone will reboot nd now you can factory reset the device properly for a clean new device.
I've told everything you needed to know.
Enjoy!
Has.007 said:
As @waleeds1 said, No. But I recommend you to take backup of all your data nd do a factory reset after you flash Lollipop firmware.
That way you won't get any lags or performance glitches.
Click to expand...
Click to collapse
The thing you said is correct but I recommend first start your phone without factory reseting @jelmerpeligrino becuase if u dont face any performance or other issues. But if u wish to factory then its still a good choice
waleeds1 said:
The thing you said is correct but I recommend first start your phone without factory reseting @jelmerpeligrino becuase if u dont face any performance or other issues. But if u wish to factory then its still a good choice
Click to expand...
Click to collapse
Yes I told that in my second post.
Actually I believe he has been using Kitkat from a long time nd for most of the apps, the things have changed. The API differences creates certain problems as it is recommended by Samsung itself to factory reset the device after Android version change.
From Kitkat to Kitkat nd Lollipop to Lollipop factory reset is not needed but for SDK changing it is needed.
Has.007 said:
Yes I told that in my second post.
Actually I believe he has been using Kitkat from a long time nd for most of the apps, the things have changed. The API differences creates certain problem as it is recommended by Samsung itself to factory reset the device after Android version change.
From Kitkat to Kitkat nd Lollipop to Lollipop factory reset is not needed but for SDK changing it is needed.
Click to expand...
Click to collapse
I didnt read that part. U got a point there mate.
Hi, I've roote my Galaxy grand prime successfully and want to upgrade to Lollipop but it doesn't work, I've tried already several files but it always ends with an error
here is the Odin Log:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
What can I do to make i happen
Happy new year to all of you
woris said:
Hi, I've roote my Galaxy grand prime successfully and want to upgrade to Lollipop but it doesn't work, I've tried already several files but it always ends with an error
here is the Odin Log:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
What can I do to make i happen
Happy new year to all of you
Click to expand...
Click to collapse
Did you download the correct firmware and are you using ap in odin if nor then you should use ap and browse for the firmware.
waleeds1 said:
Did you download the correct firmware and are you using ap in odin if nor then you should use ap and browse for the firmware.
Click to expand...
Click to collapse
Thanks for your reply, yes, I've got the correct Firmware, correct Odin settings, I even tried the Kasachstan firmware that you used but same result.
Has.007 said:
Yes I told that in my second post.
Actually I believe he has been using Kitkat from a long time nd for most of the apps, the things have changed. The API differences creates certain problems as it is recommended by Samsung itself to factory reset the device after Android version change.
From Kitkat to Kitkat nd Lollipop to Lollipop factory reset is not needed but for SDK changing it is needed.
Click to expand...
Click to collapse
Is this normal bro? I flashed it already.
waleeds1 said:
Did you download the correct firmware and are you using ap in odin if nor then you should use ap and browse for the firmware.
Click to expand...
Click to collapse
woris said:
Thanks for your reply, yes, I've got the correct Firmware, correct Odin settings, I even tried the Kasachstan firmware that you used but same result.
Click to expand...
Click to collapse
No you don't have the right firmware for your device. The baseband difference. Post a screenshot from your About Phone nd also the link of firmware you're trying to flash.
jelmerpeligrino said:
Is this normal bro? I flashed it already.
Click to expand...
Click to collapse
Yes it is normal, It is weird tho how you've two devices connected. Or maybe there's some bug in this version of Odin. Anyways all working good?
Has.007 said:
No you don't have the right firmware for your device. The baseband difference. Post a screenshot from your About Phone nd also the link of firmware you're trying to flash.
Yes it is normal, It is weird tho how you've two devices connected. Or maybe there's some bug in this version of Odin. Anyways all working good?
Click to expand...
Click to collapse
So far, it was good. The performance is better now compared to Kitkat and and the sluggishness was gone. Thanks bro!
Btw, do you have any Marshmallow ROM for this device?