Database Users

[Solved] Phone Borked: no system on MK2

Was testing kn0x0ut on our device when I ended up flashing an empty system image. I was on MK2 and attempted to use the MJ6-MJ9 method of flashing just enough files to pass the OTA checks. They didn't flash, and now it says my PIT is broken. I have recovery, and the data partition is in place as on a normal boot it loads to black screen with a blue LED. I can use adb, but there is no root so I can't restore my system. Any suggestions? I'm busy today so I won't be able to reply much, but I can gladly give more information.
EDIT: The system apparently isn't empty. The partition got flashed at some point and appears to have MF3 files.
However, there is still no root and it boots up to nothing but a black screen with blue LED still. I can't get the small update from cache that the MJ6-MJ9 thread mentions. Also, attempting a recovery boot results in the Secure Fail: Kernel screen. Recovery is fixed with the MJ6 recovery file.
FIXED: I was able to get it working following the instructions again. Not sure what the exact issue was with the first time i tried, but flashing the MJ6 recovery makes recovery boot again. I had to flash the two emergency tars, flash the recovery tar again, and then boot into recovery. It then applied the update from cache and on next reboot i went back in and used the sideload.

Have you tried ADB sideloading the update through the recovery?
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app

Supreme Dynamite said:
Have you tried ADB sideloading the update through the recovery?
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It doesn't go through since it fails the file check.

Possible help
Hey there, I Gorked my i337 at&t version on Thanksgiving day! I was able to go to this thread and just used Odin to flash the two .tar files and then was able to sideload the mk2 update. Boom phone was back to 4.3
http://forum.xda-developers.com/showthread.php?t=2526964&page=19

joshzdad2013 said:
Hey there, I Gorked my i337 at&t version on Thanksgiving day! I was able to go to this thread and just used Odin to flash the two .tar files and then was able to sideload the mk2 update. Boom phone was back to 4.3
http://forum.xda-developers.com/showthread.php?t=2526964&page=19
Click to expand...
Click to collapse
That's what i've been trying to no avail. The first small update from cache never happened and now it's broken even more.
EDIT: Recovery is booting after flashing the MJ6 recovery, surprisingly. Will attempt instructions one more time and report back.

I beleive i just said screw it since I knew I was boned! I then just flashed recovery-mj6.tar.md5 not even sure if it worked. Then flashed the mf3-emergency-part-1.tar.md5 then the mf3-emergency-part-2.tar.md5 and finally I beleive I tried the side load of my mk2 full update file and it worked.

joshzdad2013 said:
I beleive i just said screw it since I knew I was boned! I then just flashed recovery-mj6.tar.md5 not even sure if it worked. Then flashed the mf3-emergency-part-1.tar.md5 then the mf3-emergency-part-2.tar.md5 and finally I beleive I tried the side load of my mk2 full update file and it worked.
Click to expand...
Click to collapse
Good job man you had me on the seat of my pants reading this.
ROOTED ATT MK2 using Tapatalk

[Q] help system wont boot only recovery

Hi I'm wondering if you can help me- I tried to follow az_biker's instructions about rooting installing recovery and flashing ROMs. I'm on NC4, rooted with towelroot, installed busybox, safestrap 3.75, root checker and Chainfire's SuperSu. I was unable to flash or install baja rom. Then in step 8- and in Odin, downloading to target- getting the phone recognized in the hilighted 'ID-COM' and one line in the messages 'ADDED!'. When hitting 'AD' to find the MJE tar file, it was nowhere to be founnd. I even put the file on my desktop but for some reason Odin just dosent see it. I did finally install the Baja 4th of July version since this was a prior step and downloaded it which could only be found in the downloads. In Safestrap I found the zip file and did another wipe, hit back, advanced, wiped all but sd card then installed it. In the process it did say 'can't find MD5 file and continued and did finish- 'installed successfully'. When trying to reboot system, the phone goes dead. The only thing I can do at this point is remove the battery and boot into recovery but system will not boot. I'd gladly send a donation to anyone that could shed some light this and tell me what to do, I'd greatly appreciate it!

tjmethod said:
Hi I'm wondering if you can help me- I tried to follow az_biker's instructions about rooting installing recovery and flashing ROMs. I'm on NC4, rooted with towelroot, installed busybox, safestrap 3.75, root checker and Chainfire's SuperSu. I was unable to flash or install baja rom. Then in step 8- and in Odin, downloading to target- getting the phone recognized in the hilighted 'ID-COM' and one line in the messages 'ADDED!'. When hitting 'AD' to find the MJE tar file, it was nowhere to be founnd. I even put the file on my desktop but for some reason Odin just dosent see it. I did finally install the Baja 4th of July version since this was a prior step and downloaded it which could only be found in the downloads. In Safestrap I found the zip file and did another wipe, hit back, advanced, wiped all but sd card then installed it. In the process it did say 'can't find MD5 file and continued and did finish- 'installed successfully'. When trying to reboot system, the phone goes dead. The only thing I can do at this point is remove the battery and boot into recovery but system will not boot. I'd gladly send a donation to anyone that could shed some light this and tell me what to do, I'd greatly appreciate it!
Click to expand...
Click to collapse
Were you on NC4 initially and rooted it or were you on MJE and upgraded to NC4? Are you unzipping the file before you try looking for it with Odin and are you using the AP section in Odin? Have you tried booting into the stock recovery and doing a factory reset?

airmaxx23 said:
Were you on NC4 initially and rooted it or were you on MJE and upgraded to NC4? Are you unzipping the file before you try looking for it with Odin and are you using the AP section in Odin? Have you tried booting into the stock recovery and doing a factory reset?
Click to expand...
Click to collapse
Hi thanks for posting- I bought the phone and within 2 weeks the OTA for kitkat came out so I took it. The baseband is NC4 now and I dont know what it was before kk upgrade. Yes using the AP button in Odin. The title of the MJE tar file is this:
ALL_N900VVRUBMJE_N900VVZWMJE_2106277_REV03_user_low_ship_MULTI_CERT.tar.md5
This file does not seem to be zipped up and it has a blank piece of paper for an icon. .
I now see where the md5 came from. I cannot do anything but remove battery and put back in then it only boots into safestrap. Another mistake I made was not making a backup of the stock rom. Any suggestions?

tjmethod said:
Hi thanks for posting- I bought the phone and within 2 weeks the OTA for kitkat came out so I took it. The baseband is NC4 now and I dont know what it was before kk upgrade. Yes using the AP button in Odin. The title of the MJE tar file is this:
ALL_N900VVRUBMJE_N900VVZWMJE_2106277_REV03_user_low_ship_MULTI_CERT.tar.md5
This file does not seem to be zipped up and it has a blank piece of paper for an icon. .
I now see where the md5 came from. I cannot do anything but remove battery and put back in then it only boots into safestrap. Another mistake I made was not making a backup of the stock rom. Any suggestions?
Click to expand...
Click to collapse
You can't use the MJE tar file since you took the OTA, you would need the NC4 full tar file. You should be able to boot into download mode from SS or by turning the device off and holding down Home, then Volume down, then Power. You can try doing a factory reset in the stock recovery by holding down Home, Volume up and Power.

airmaxx23 said:
You can't use the MJE tar file since you took the OTA, you would need the NC4 full tar file. You should be able to boot into download mode from SS or by turning the device off and holding down Home, then Volume down, then Power. You can try doing a factory reset in the stock recovery by holding down Home, Volume up and Power.
Click to expand...
Click to collapse
Ok, I downloaded 7zip and am extracting that file. it finished and I had hit vol dwn, power and menu button and when the first screen came up, I hit vol up and am currently in download mode 'Downloading... Do not turn off target'. After the file was extracted into the same name with a manilla file folder icon which was now then recognized by Odin in the AP an advanced on its own and is currently at this state- (screenshot) I attached- let me know if you can see it?

tjmethod said:
Ok, I downloaded 7zip and am extracting that file. it finished and I had hit vol dwn, power and menu button and when the first screen came up, I hit vol up and am currently in download mode 'Downloading... Do not turn off target'. After the file was extracted into the same name with a manilla file folder icon which was now then recognized by Odin in the AP an advanced on its own and is currently at this state- (screenshot) I attached- let me know if you can see it?
Click to expand...
Click to collapse
Hi again I am just reading what you your reply was after I already inserted on downloaded the MJE. So at this point I should boot into stock recovery. How would I remove the MJE tar file?. I can find the NC4 tar then run Odin again with this file?

tjmethod said:
Hi again I am just reading what you your reply was after I already inserted on downloaded the MJE. So at this point I should boot into stock recovery. How would I remove the MJE tar file?. I can find the NC4 tar then run Odin again with this file?
Click to expand...
Click to collapse
If you haven't installed theh MJE file, or actually even if you have, just boot back into download mode and flash the NC4 file in Odin.

airmaxx23 said:
If you haven't installed theh MJE file, or actually even if you have, just boot back into download mode and flash the NC4 file in Odin.
Click to expand...
Click to collapse
Thank you I am downloading it as we speak. Will I be able to boot up in baja rom or only stock?. Notorious 3 had told me originally "yes you can install the NC2 tar as these instruction are specifically for users who are on NC4 OTA". Doe he mean to install custom roms or can I install or flash custom roms with the full NC4 tar?. Ireally appreciate your help-

tjmethod said:
Thank you I am downloading it as we speak. Will I be able to boot up in baja rom or only stock?. Notorious 3 had told me originally "yes you can install the NC2 tar as these instruction are specifically for users who are on NC4 OTA". Doe he mean to install custom roms or can I install or flash custom roms with the full NC4 tar?. Ireally appreciate your help-
Click to expand...
Click to collapse
Once you boot into the stock NC4 ROM root it with TowelRoot, install SU, BusyBox and SS 3.75. Boot into SS and install BAJA ROM then before rebooting go into download mode through SS and flash the file in the link below.
http://www.androidfilehost.com/?fid=23501681358551261

airmaxx23 said:
Once you boot into the stock NC4 ROM root it with TowelRoot, install SU, BusyBox and SS 3.75. Boot into SS and install BAJA ROM then before rebooting go into download mode through SS and flash the file in the link below.
http://www.androidfilehost.com/?fid=23501681358551261
Click to expand...
Click to collapse
Thanks once again, my only other question is how to find baja rom at that point?- go to xda and download it to the phone?

tjmethod said:
Thanks once again, my only other question is how to find baja rom at that point?- go to xda and download it to the phone?
Click to expand...
Click to collapse
Yeah, just download it and when you boot into SS browse to the download folder and it will be there.

airmaxx23 said:
Yeah, just download it and when you boot into SS browse to the download folder and it will be there.
Click to expand...
Click to collapse
Thanks alot! the phone booting up

tjmethod said:
Thanks alot! the phone booting up
Click to expand...
Click to collapse
Great, I'm glad we got it working. Have fun!! Don't worry about the donation, just hit the thanks button a few times. :laugh:

airmaxx23 said:
Great, I'm glad we got it working. Have fun!! Don't worry about the donation, just hit the thanks button a few times. :laugh:
Click to expand...
Click to collapse
I really do appreciate it, I ended up flashing the firmware file through Odin and installing that way then pulling the battery and it booted into baja but weather, email, google etc. all stopped working errors constantly. Any idea how to fix?. I take it you're a developer? Anyway, I'm TJ

tjmethod said:
I really do appreciate it, I ended up flashing the firmware file through Odin and installing that way then pulling the battery and it booted into baja but weather, email, google etc. all stopped working errors constantly. Any idea how to fix?. I take it you're a developer? Anyway, I'm TJ
Click to expand...
Click to collapse
Did you wipe data, cache and dalvik before installing Baja? I'm not a developer, I just enjoy messing around with my devices and I like helping people out when I can.

airmaxx23 said:
I'm not a developer, I just enjoy messing around with my devices and I like helping people out when I can.
Click to expand...
Click to collapse
It is so nice to see the decent and patient people that are willing to help those that ask for it.

airmaxx23 said:
Did you wipe data, cache and dalvik before installing Baja? I'm not a developer, I just enjoy messing around with my devices and I like helping people out when I can.
Click to expand...
Click to collapse
Hi no hadn't wiped all that since doing a factory reset days ago but I will try that- should I redownload the rom to install? So what's you name and what devices do you have? Everything I have is Samsung

kinstre11 said:
It is so nice to see the decent and patient people that are willing to help those that ask for it.
Click to expand...
Click to collapse
Right on!

tjmethod said:
Hi no hadn't wiped all that since doing a factory reset days ago but I will try that- should I redownload the rom to install? So what's you name and what devices do you have? Everything I have is Samsung
Click to expand...
Click to collapse
You don't need to redownload it. You should wipe everything but the Micro SDcard whenever you install a new ROM. You won't have the errors once you wipe everything and install the ROM again.

airmaxx23 said:
You don't need to redownload it. You should wipe everything but the Micro SDcard whenever you install a new ROM. You won't have the errors once you wipe everything and install the ROM again.
Click to expand...
Click to collapse
Hi again all is worki g fine except lost alot of apps & widgets- voicemail, samsung hub etc., just trying to figure getting it all back on. I notice baja is faster also can't find how to increase battery but I will have to play with it. So what rom do you use?

Bootloop on hyperdrive rom, please help

I need help. lol. my Samsung note 3 is stuck in bootloop. I posted this in the thread for the hyperdrive rom because its what I was trying to flash.
i wiped and flashed in the stock slot. and now im stuck in the bootloop problem. it says recovery booting in the upper left of the screen and just keeps rebooting. I tried going in to odin and reloading the "n900v kk firmware" and nothing. anyone know a fix for this. is there something I can download to flash to fix this. I know I will have to use odin, just not sure what.

donelam304 said:
I need help. lol. my Samsung note 3 is stuck in bootloop. I posted this in the thread for the hyperdrive rom because its what I was trying to flash.
i wiped and flashed in the stock slot. and now im stuck in the bootloop problem. it says recovery booting in the upper left of the screen and just keeps rebooting. I tried going in to odin and reloading the "n900v kk firmware" and nothing. anyone know a fix for this. is there something I can download to flash to fix this. I know I will have to use odin, just not sure what.
Click to expand...
Click to collapse
Hi I'm kinda new to the community and Android, but I'll try to help. I've been having issues trying to use safestrap to install my custom roms. I know that 3.72 had issues with the extra slots. That was supposed to be fixed in 3.75. In short I haven't reached a loop but have had to flash to stock several times with Odin. I had to remove my battery to get the phone in "power off" mode. From there, I booted to download for odin (assuming you can get it to boot to download-volume down/home/power buttons to get there).
Once I got there, I just made sure I had the firmware version I wanted to go back to, plugged it into odin and bam! Back to stock to start over.

Bryotch said:
Hi I'm kinda new to the community and Android, but I'll try to help. I've been having issues trying to use safestrap to install my custom roms. I know that 3.72 had issues with the extra slots. That was supposed to be fixed in 3.75. In short I haven't reached a loop but have had to flash to stock several times with Odin. I had to remove my battery to get the phone in "power off" mode. From there, I booted to download for odin (assuming you can get it to boot to download-volume down/home/power buttons to get there).
Once I got there, I just made sure I had the firmware version I wanted to go back to, plugged it into odin and bam! Back to stock to start over.
Click to expand...
Click to collapse
I can boot in to the download mode. has no problem. even tried flashing the n900v_kk_firmware.tar.md5 tar,
ALL_N900VVRUBMJE_N900VVZWMJE_2106277_REV03_user_low_ship_MULTI_CERT.tar.md5
and even tried the N900VVRUCNC4_N900VVZWCNC4_N900VVRUCNC4_HOME.tar.md5
and when I do the MJE one it says invalid. am I flashing the wrong file is there something else I should be using. when I get in to manual mode after it boots in to manual recovery mode it says im on NC4. it says in the upper left corner the following:
Android stem recovery <3e>
KOT49H.N900VVRUCNC
volume up/down to move highlight;
power button to select.
reboot system now
apply update from ADB
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
is there a way to flash safestrap or CWM in odin.

donelam304 said:
I can boot in to the download mode. has no problem. even tried flashing the n900v_kk_firmware.tar.md5 tar,
ALL_N900VVRUBMJE_N900VVZWMJE_2106277_REV03_user_low_ship_MULTI_CERT.tar.md5
and even tried the N900VVRUCNC4_N900VVZWCNC4_N900VVRUCNC4_HOME.tar.md5
and when I do the MJE one it says invalid. am I flashing the wrong file is there something else I should be using. when I get in to manual mode after it boots in to manual recovery mode it says im on NC4. it says in the upper left corner the following:
Android stem recovery <3e>
KOT49H.N900VVRUCNC
volume up/down to move highlight;
power button to select.
reboot system now
apply update from ADB
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
is there a way to flash safestrap or CWM in odin.
Click to expand...
Click to collapse
You're running the same build I have, been having similar issues. I used Odin no completely repartition and wipe the phone. I used N900VVRUCNC4_N900VVZWCNC4_N900VVRUCNC4_HOME.tar.md5 and the HLTE.pit file (for this build). In Odin You put the pit and md5 files in (.pit file in the PIT slot and md5 in the AP slot on Odin 3.09) This took me back to the KK NC4 build, granted, I lost alot of data but I didn't use a Nandroid backup either. This got me back to a functional device but i'm still having issues getting ANY custom roms to work. I did flash to NC2 kernel since then and still no luck. Let me know if that helps. I can get the files I used if you can't find them, but most everything came from xda.
PS. you can find some firmwares with recovery and other things added. I avoided these just to make sure I could get back to stock. I use Towelroot, BusyBox, SuperSU, and Safestrap 3.75 b04

Bryotch said:
You're running the same build I have, been having similar issues. I used Odin no completely repartition and wipe the phone. I used N900VVRUCNC4_N900VVZWCNC4_N900VVRUCNC4_HOME.tar.md5 and the HLTE.pit file (for this build). In Odin You put the pit and md5 files in (.pit file in the PIT slot and md5 in the AP slot on Odin 3.09) This took me back to the KK NC4 build, granted, I lost alot of data but I didn't use a Nandroid backup either. This got me back to a functional device but i'm still having issues getting ANY custom roms to work. I did flash to NC2 kernel since then and still no luck. Let me know if that helps. I can get the files I used if you can't find them, but most everything came from xda.
PS. you can find some firmwares with recovery and other things added. I avoided these just to make sure I could get back to stock. I use Towelroot, BusyBox, SuperSU, and Safestrap 3.75 b04
Click to expand...
Click to collapse
i done a search on the stock firmware you mentioned and after about 2 dozen websites and and trying about 15 flashes I finally got it to work. this has been one heck of a day. I finally got it to work. I am in the process of trying to get safestrap and stuff on it now. I already used towelroot to rot it. what version of safestrap do you recommend. I was told 3.72 was for KK. and 3.75 was for the Samsung galaxy S5.

donelam304 said:
i done a search on the stock firmware you mentioned and after about 2 dozen websites and and trying about 15 flashes I finally got it to work. this has been one heck of a day. I finally got it to work. I am in the process of trying to get safestrap and stuff on it now. I already used towelroot to rot it. what version of safestrap do you recommend. I was told 3.72 was for KK. and 3.75 was for the Samsung galaxy S5.
Click to expand...
Click to collapse
here is the link I found with all the carriers for the note 3
http://galaxynote3root.com/galaxy-note-3-repair/how-to-unroot-galaxy-note-3/

donelam304 said:
here is the link I found with all the carriers for the note 3
http://galaxynote3root.com/galaxy-note-3-repair/how-to-unroot-galaxy-note-3/
Click to expand...
Click to collapse
thanks so much by the way. I greatly appreciate the assistance.

[Q] Soft Bricked after Flashing Back

After I updated my Verizon Galaxy S5 to Lollipop, I tried to flash a lower version official .tar through Odin, and got stuck in a bootloop I can still flash .tars through Odin, but I cannot actually use my phone. How do I get my phone working again? Can I?

waffleman1230 said:
After I updated my Verizon Galaxy S5 to Lollipop, I tried to flash a lower version official .tar through Odin, and got stuck in a bootloop I can still flash .tars through Odin, but I cannot actually use my phone. How do I get my phone working again? Can I?
Click to expand...
Click to collapse
Can you be more specific? What TAR did you flash? Did you flash an older corresponding kernel?
What is your ultimate goal?

Thanks
kprice8 said:
Can you be more specific? What TAR did you flash? Did you flash an older corresponding kernel?
What is your ultimate goal?
Click to expand...
Click to collapse
I figured out how to restore on my own. Turns out I can only restore to NCG. I fixed my own problem. Thanks for helping though!
To any users who visit this form in the future, you can only flash back to NCG after updating to OTA Stock Lollipop.

waffleman1230 said:
I figured out how to restore on my own. Turns out I can only restore to NCG. I fixed my own problem. Thanks for helping though!
To any users who visit this form in the future, you can only flash back to NCG after updating to OTA Stock Lollipop.
Click to expand...
Click to collapse
This is not true. You can restore back to whatever version you want. If you get stuck in a bootloop just hold down the home, volume down and power buttons for about 10 seconds and the phone will boot in to a maintenance menu. From there select factory data reset with the volume down key and then press the home button to execute the option. It should boot normally after that. To avoid this just enter the stock recovery after flashing the tar in Odin and factory data reset from there.

I think I know what you did
waffleman1230 said:
After I updated my Verizon Galaxy S5 to Lollipop, I tried to flash a lower version official .tar through Odin, and got stuck in a bootloop I can still flash .tars through Odin, but I cannot actually use my phone. How do I get my phone working again? Can I?
Click to expand...
Click to collapse
If you downgraded the kernal it won't let you so you have to go back to a lower verison of android or flash the lollipop kernel

Please help me save this great phone.

So my beloved note 4 is very poorly and I'm unsure of how to fix her
Phone turns on and boots, sometimes takes longer than others, and I can get to Download mode and recovery.... So maybe there's hope?
It's back on stock kit kat..... Here are it's issues.
Random freezes and reboots,
Sometimes the imei is unknown, pulling sim and rebooting and dialling *#06# brings it back temporarily.
This all happened very suddenly after a MM OTA update but maybe just a coincidence.
What I've tried so far, flashed stock KK with odin and wiped in recovery, none helped.
I've downloaded the n910f 4 file repair firmware that was kindly posted in another thread, but I've read conflicting advice about ticking the repartition option in odin.... Some said do it and someone else said this would wipe my imei... Which would be obviously bad.
Has anyone had similar issues to me and found a solution? I'd be eternally grateful for any help, I love this phone and want to save it. Please help.
Kind regards steve.
Sent from my SM-T800 using Tapatalk

Odin it to 6.0

Ghanaboy said:
Odin it to 6.0
Click to expand...
Click to collapse
Thanks for the reply, I've tried that already but the flash failed in odin, KK will flash. I thought this strange but after I reset the phone when the issues first started it went from MM back to its original firmware KK. Now only KK will flash successfully.
I'm open to all solutions.
Sent from my SM-T800 using Tapatalk

gingerdude said:
Thanks for the reply, I've tried that already but the flash failed in odin, KK will flash. I thought this strange but after I reset the phone when the issues first started it went from MM back to its original firmware KK. Now only KK will flash successfully.
I'm open to all solutions.
Sent from my SM-T800 using
grab 4 files lollipop repair firmware with pit file from www.tsar3000.com.
Flash in odin.
Once complete do factory reset.
Now go ahead and flash MM firmware with pit file that you get from repair firmware.
Again factory reset.
Done.
Click to expand...
Click to collapse

Trex888 said:
gingerdude said:
Thanks for the reply, I've tried that already but the flash failed in odin, KK will flash. I thought this strange but after I reset the phone when the issues first started it went from MM back to its original firmware KK. Now only KK will flash successfully.
I'm open to all solutions.
Sent from my SM-T800 using
grab 4 files lollipop repair firmware with pit file from www.tsar3000.com.
Flash in odin.
Once complete do factory reset.
Now go ahead and flash MM firmware with pit file that you get from repair firmware.
Again factory reset.
Done.
Click to expand...
Click to collapse
thank you for the reply....do I click re partition in odin when flashing the repair firmware? it won't erase imei will it. sorry for lame questions but I just want to be sure .
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse

gingerdude said:
Trex888 said:
thank you for the reply....do I click re partition in odin when flashing the repair firmware? it won't erase imei will it. sorry for me questions but I just want to be sure .
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
In odin options dont tick on "erase imei"
Just tick on re partition , nand erase all & auto reboot.
Make sure do factory reset & wipe cache from stock recovery after flash.
Click to expand...
Click to collapse

Trex888 said:
gingerdude said:
In odin options dont tick on "erase imei"
Just tick on re partition , nand erase all & auto reboot.
Make sure do factory reset & wipe cache from stock recovery after flash.
Click to expand...
Click to collapse
Firstly I'd like to thank you for your time and help.
Thought I'd share what happened. I flashed the 4 files and pit file and it failed right at the end, tried 2 different odin versions with same results. This left me without recovery and the triangle of death saying please connect to kies.
I could still get into download mode so I flashed just the ap file from the recovery firmware, It passed but the boot took 20 minutes and at that point I pulled the battery and got Into recovery and after 2 minutes or so the blue line went by itself and it rebooted to lollipop 5.0.1
I can make phone calls and install apps, it's just a little laggy but may improve after it settles down.
Do you think I should quit while ahead? Flash MM In odin or let the phone OTA update?
Thanks again and any further thoughts appreciated.
Cheers
Sent from my SM-T800 using Tapatalk
Click to expand...
Click to collapse

gingerdude said:
Trex888 said:
Firstly I'd like to thank you for your time and help.
Thought I'd share what happened. I flashed the 4 files and pit file and it failed right at the end, tried 2 different odin versions with same results. This left me without recovery and the triangle of death saying please connect to kies.
I could still get into download mode so I flashed just the ap file from the recovery firmware, It passed but the boot took 20 minutes and at that point I pulled the battery and got Into recovery and after 2 minutes or so the blue line went by itself and it rebooted to lollipop 5.0.1
I can make phone calls and install apps, it's just a little laggy but may improve after it settles down.
Do you think I should quit while ahead? Flash MM In odin or let the phone OTA update?
Thanks again and any further thoughts appreciated.
Cheers
Sent from my SM-T800 using Tapatalk
Click to expand...
Click to collapse
Did you wip cache & factory reset after flash ?
Yes you can flash mm with pit file but must do factory reset after every flash to get clean operating system and avoid bootloops.
I suggest flash in odin mm instead of ota to avoid any issues.
Once your phone boot do not touch just let it rest for atleast 10 minutes to settle down.
Click to expand...
Click to collapse

Trex888 said:
gingerdude said:
Did you wip cache & factory reset after flash ?
Yes you can flash mm with pit file but must do factory reset after every flash to get clean operating system and avoid bootloops.
I suggest flash in odin mm instead of ota to avoid any issues.
Once your phone boot do not touch just let it rest for atleast 10 minutes to settle down.
Click to expand...
Click to collapse
just a quick update...when I flashed the repair lollipop firmware and it failed right at the end and I flashed stock lollipop and it booted .....the phone runs smoothly now and no crashes but I've got a another issue....the baseband is unknown and imei is null. d'oh
I've flashed MM and all is working great except I've still got the unknown baseband imei null.....
do you think it's missing it's modem....cp file or corrupted ems folder?
is there a fix apart from service center?
any help you could offer would be great.. cheers.
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse