Hi I'm wondering if you can help me- I tried to follow az_biker's instructions about rooting installing recovery and flashing ROMs. I'm on NC4, rooted with towelroot, installed busybox, safestrap 3.75, root checker and Chainfire's SuperSu. I was unable to flash or install baja rom. Then in step 8- and in Odin, downloading to target- getting the phone recognized in the hilighted 'ID-COM' and one line in the messages 'ADDED!'. When hitting 'AD' to find the MJE tar file, it was nowhere to be founnd. I even put the file on my desktop but for some reason Odin just dosent see it. I did finally install the Baja 4th of July version since this was a prior step and downloaded it which could only be found in the downloads. In Safestrap I found the zip file and did another wipe, hit back, advanced, wiped all but sd card then installed it. In the process it did say 'can't find MD5 file and continued and did finish- 'installed successfully'. When trying to reboot system, the phone goes dead. The only thing I can do at this point is remove the battery and boot into recovery but system will not boot. I'd gladly send a donation to anyone that could shed some light this and tell me what to do, I'd greatly appreciate it!
tjmethod said:
Hi I'm wondering if you can help me- I tried to follow az_biker's instructions about rooting installing recovery and flashing ROMs. I'm on NC4, rooted with towelroot, installed busybox, safestrap 3.75, root checker and Chainfire's SuperSu. I was unable to flash or install baja rom. Then in step 8- and in Odin, downloading to target- getting the phone recognized in the hilighted 'ID-COM' and one line in the messages 'ADDED!'. When hitting 'AD' to find the MJE tar file, it was nowhere to be founnd. I even put the file on my desktop but for some reason Odin just dosent see it. I did finally install the Baja 4th of July version since this was a prior step and downloaded it which could only be found in the downloads. In Safestrap I found the zip file and did another wipe, hit back, advanced, wiped all but sd card then installed it. In the process it did say 'can't find MD5 file and continued and did finish- 'installed successfully'. When trying to reboot system, the phone goes dead. The only thing I can do at this point is remove the battery and boot into recovery but system will not boot. I'd gladly send a donation to anyone that could shed some light this and tell me what to do, I'd greatly appreciate it!
Click to expand...
Click to collapse
Were you on NC4 initially and rooted it or were you on MJE and upgraded to NC4? Are you unzipping the file before you try looking for it with Odin and are you using the AP section in Odin? Have you tried booting into the stock recovery and doing a factory reset?
airmaxx23 said:
Were you on NC4 initially and rooted it or were you on MJE and upgraded to NC4? Are you unzipping the file before you try looking for it with Odin and are you using the AP section in Odin? Have you tried booting into the stock recovery and doing a factory reset?
Click to expand...
Click to collapse
Hi thanks for posting- I bought the phone and within 2 weeks the OTA for kitkat came out so I took it. The baseband is NC4 now and I dont know what it was before kk upgrade. Yes using the AP button in Odin. The title of the MJE tar file is this:
ALL_N900VVRUBMJE_N900VVZWMJE_2106277_REV03_user_low_ship_MULTI_CERT.tar.md5
This file does not seem to be zipped up and it has a blank piece of paper for an icon. .
I now see where the md5 came from. I cannot do anything but remove battery and put back in then it only boots into safestrap. Another mistake I made was not making a backup of the stock rom. Any suggestions?
tjmethod said:
Hi thanks for posting- I bought the phone and within 2 weeks the OTA for kitkat came out so I took it. The baseband is NC4 now and I dont know what it was before kk upgrade. Yes using the AP button in Odin. The title of the MJE tar file is this:
ALL_N900VVRUBMJE_N900VVZWMJE_2106277_REV03_user_low_ship_MULTI_CERT.tar.md5
This file does not seem to be zipped up and it has a blank piece of paper for an icon. .
I now see where the md5 came from. I cannot do anything but remove battery and put back in then it only boots into safestrap. Another mistake I made was not making a backup of the stock rom. Any suggestions?
Click to expand...
Click to collapse
You can't use the MJE tar file since you took the OTA, you would need the NC4 full tar file. You should be able to boot into download mode from SS or by turning the device off and holding down Home, then Volume down, then Power. You can try doing a factory reset in the stock recovery by holding down Home, Volume up and Power.
airmaxx23 said:
You can't use the MJE tar file since you took the OTA, you would need the NC4 full tar file. You should be able to boot into download mode from SS or by turning the device off and holding down Home, then Volume down, then Power. You can try doing a factory reset in the stock recovery by holding down Home, Volume up and Power.
Click to expand...
Click to collapse
Ok, I downloaded 7zip and am extracting that file. it finished and I had hit vol dwn, power and menu button and when the first screen came up, I hit vol up and am currently in download mode 'Downloading... Do not turn off target'. After the file was extracted into the same name with a manilla file folder icon which was now then recognized by Odin in the AP an advanced on its own and is currently at this state- (screenshot) I attached- let me know if you can see it?
tjmethod said:
Ok, I downloaded 7zip and am extracting that file. it finished and I had hit vol dwn, power and menu button and when the first screen came up, I hit vol up and am currently in download mode 'Downloading... Do not turn off target'. After the file was extracted into the same name with a manilla file folder icon which was now then recognized by Odin in the AP an advanced on its own and is currently at this state- (screenshot) I attached- let me know if you can see it?
Click to expand...
Click to collapse
Hi again I am just reading what you your reply was after I already inserted on downloaded the MJE. So at this point I should boot into stock recovery. How would I remove the MJE tar file?. I can find the NC4 tar then run Odin again with this file?
tjmethod said:
Hi again I am just reading what you your reply was after I already inserted on downloaded the MJE. So at this point I should boot into stock recovery. How would I remove the MJE tar file?. I can find the NC4 tar then run Odin again with this file?
Click to expand...
Click to collapse
If you haven't installed theh MJE file, or actually even if you have, just boot back into download mode and flash the NC4 file in Odin.
airmaxx23 said:
If you haven't installed theh MJE file, or actually even if you have, just boot back into download mode and flash the NC4 file in Odin.
Click to expand...
Click to collapse
Thank you I am downloading it as we speak. Will I be able to boot up in baja rom or only stock?. Notorious 3 had told me originally "yes you can install the NC2 tar as these instruction are specifically for users who are on NC4 OTA". Doe he mean to install custom roms or can I install or flash custom roms with the full NC4 tar?. Ireally appreciate your help-
tjmethod said:
Thank you I am downloading it as we speak. Will I be able to boot up in baja rom or only stock?. Notorious 3 had told me originally "yes you can install the NC2 tar as these instruction are specifically for users who are on NC4 OTA". Doe he mean to install custom roms or can I install or flash custom roms with the full NC4 tar?. Ireally appreciate your help-
Click to expand...
Click to collapse
Once you boot into the stock NC4 ROM root it with TowelRoot, install SU, BusyBox and SS 3.75. Boot into SS and install BAJA ROM then before rebooting go into download mode through SS and flash the file in the link below.
http://www.androidfilehost.com/?fid=23501681358551261
airmaxx23 said:
Once you boot into the stock NC4 ROM root it with TowelRoot, install SU, BusyBox and SS 3.75. Boot into SS and install BAJA ROM then before rebooting go into download mode through SS and flash the file in the link below.
http://www.androidfilehost.com/?fid=23501681358551261
Click to expand...
Click to collapse
Thanks once again, my only other question is how to find baja rom at that point?- go to xda and download it to the phone?
tjmethod said:
Thanks once again, my only other question is how to find baja rom at that point?- go to xda and download it to the phone?
Click to expand...
Click to collapse
Yeah, just download it and when you boot into SS browse to the download folder and it will be there.
airmaxx23 said:
Yeah, just download it and when you boot into SS browse to the download folder and it will be there.
Click to expand...
Click to collapse
Thanks alot! the phone booting up
tjmethod said:
Thanks alot! the phone booting up
Click to expand...
Click to collapse
Great, I'm glad we got it working. Have fun!! Don't worry about the donation, just hit the thanks button a few times. :laugh:
airmaxx23 said:
Great, I'm glad we got it working. Have fun!! Don't worry about the donation, just hit the thanks button a few times. :laugh:
Click to expand...
Click to collapse
I really do appreciate it, I ended up flashing the firmware file through Odin and installing that way then pulling the battery and it booted into baja but weather, email, google etc. all stopped working errors constantly. Any idea how to fix?. I take it you're a developer? Anyway, I'm TJ
tjmethod said:
I really do appreciate it, I ended up flashing the firmware file through Odin and installing that way then pulling the battery and it booted into baja but weather, email, google etc. all stopped working errors constantly. Any idea how to fix?. I take it you're a developer? Anyway, I'm TJ
Click to expand...
Click to collapse
Did you wipe data, cache and dalvik before installing Baja? I'm not a developer, I just enjoy messing around with my devices and I like helping people out when I can.
airmaxx23 said:
I'm not a developer, I just enjoy messing around with my devices and I like helping people out when I can.
Click to expand...
Click to collapse
It is so nice to see the decent and patient people that are willing to help those that ask for it.
airmaxx23 said:
Did you wipe data, cache and dalvik before installing Baja? I'm not a developer, I just enjoy messing around with my devices and I like helping people out when I can.
Click to expand...
Click to collapse
Hi no hadn't wiped all that since doing a factory reset days ago but I will try that- should I redownload the rom to install? So what's you name and what devices do you have? Everything I have is Samsung
kinstre11 said:
It is so nice to see the decent and patient people that are willing to help those that ask for it.
Click to expand...
Click to collapse
Right on!
tjmethod said:
Hi no hadn't wiped all that since doing a factory reset days ago but I will try that- should I redownload the rom to install? So what's you name and what devices do you have? Everything I have is Samsung
Click to expand...
Click to collapse
You don't need to redownload it. You should wipe everything but the Micro SDcard whenever you install a new ROM. You won't have the errors once you wipe everything and install the ROM again.
airmaxx23 said:
You don't need to redownload it. You should wipe everything but the Micro SDcard whenever you install a new ROM. You won't have the errors once you wipe everything and install the ROM again.
Click to expand...
Click to collapse
Hi again all is worki g fine except lost alot of apps & widgets- voicemail, samsung hub etc., just trying to figure getting it all back on. I notice baja is faster also can't find how to increase battery but I will have to play with it. So what rom do you use?
Related
I truly need the community's help on this one. Trying to fix a rom that I was using, I decided to wipe everything to reflash it. However, some how I read the thread wrong. Using TWRP, I formatted the "internal storage" thinking that was going to fix my Rom problems.
Now, I can't boot into the Rom or any rom, unless I wipe everything and restore one of my back ups. I restored a back up and it booted, but my data is jacked and phone service is not operable. I thought maybe a reboot will fix it, and now my phone is stuck at "Samsung Galaxy S 4". It doesn't move from there.
What should I do? How do I get it it continue the boot into the rom after a regular reboot? How do I get my radio back?
It's funny to me because I usually never get this careless with my phone. So I can laugh about it but damn I have to figure this one out!
Please help!!!!!!!!!!!!!!!!!
I am by know means an expert but I think you may have to start here with the firmware files then try and flash your backup http://forum.xda-developers.com/showthread.php?t=2338919
Sent from my SPH-L720 using Tapatalk 4
Thanks Chief, let me try that!
Thanks Chief. Unfortunately, that didn't work. I used Odin to flash the Firmware files and let it reboot. I'm still stuck at the Samsung Gal...boot screen. Let me try manually going into recovery and restoring.
Any other ideas? Anyone?
Kenjari said:
Thanks Chief. Unfortunately, that didn't work. I used Odin to flash the Firmware files and let it reboot. I'm still stuck at the Samsung Gal...boot screen. Let me try manually going into recovery and restoring.
Any other ideas? Anyone?
Click to expand...
Click to collapse
Have you tried flashing the complete odin ROM? You can find the all in one somewhere on the dev thread, it has rom, kernel, firmware and the rom all in one as it came from samsung. That should take care of your problem. It will wipe everything, or I think there was also a thread somewhere with odin flashables that didn't wipe data or internal sd but I can't seem to find it right now.
ifly4vamerica said:
Have you tried flashing the complete odin ROM? You can find the all in one somewhere on the dev thread, it has rom, kernel, firmware and the rom all in one as it came from samsung. That should take care of your problem. It will wipe everything, or I think there was also a thread somewhere with odin flashables that didn't wipe data or internal sd but I can't seem to find it right now.
Click to expand...
Click to collapse
Exactly. I'm on the target. I'm currently waiting for this tar that will unroot the phone. It is MDL but I will update and reroot. I hope this does the ticket. I'm going to use Odin to flash it or unroot.
Well strike two. That didn't work either. I downloaded a unrooted MDL tar and connected to Odin. When through the entire process and it rebooted. It still is stuck at "Samsung Galaxy S4".
I read on the Nexus 7 that I might have to reflash a system.img and boot.img? Someone else had a similar experience on the N7 and had to download it via flashdrive and then install via recovery. I'm not saying that's the case but I wonder if I need to reflash a boot.img or something.
Please help. Not sure where to go at this point. Unrooting didn't help.
Try downloading this file extract the tar and flash that in PC Odin. (don't check repartion!).
That is the full stock MF9 firmware, boot, recovery, kernel and ROM.
Then maybe use CF Autoroot, then goomanger to get twrp and flash one of your nand's
Progress made.
leaderbuilder said:
Try downloading this file extract the tar and flash that in PC Odin. (don't check repartion!).
That is the full stock MF9 firmware, boot, recovery, kernel and ROM.
Then maybe use CF Autoroot, then goomanger to get twrp and flash one of your nand's
Click to expand...
Click to collapse
leader, chief, ifly4,...I'm making progress.
leader, actually I flashed a previous version, the MDL via Odin. At first it didn't boot as stated in my previous post. I decided to wipe and factory reset. """"Bingo"""" it booted. Now I'm on MDL and unrooted. However, I transferred my phone over to a previous device so I can't update profile and prl. I'm going to activate the phone and see if it works. For some reason I can't can't seem to get a radio signal on it. It shows the be O with the slash in the middle. This is what it looked like before I deactivated it and lost everything before.
I post back with results. Not quite solved yet.
Thanks leader and everyone else.
Sound like your on the wrong firmware/baseband. what does your modem/baseband say?
Yeeessssss
leaderbuilder said:
Sound like your on the wrong firmware/baseband. what does your modem/baseband say?
Click to expand...
Click to collapse
It says L720VPUAMDL. I actually got it going. I had to change it from WCDMA to CDMA and reset. Now I'm unrooted. and going. However, leader, is there away to update the modem/baseband before I root? Or should I root then flash the MF9 Modem?
if you got MDL to activate you can jst take the OTA update to MF9. It will update it all.
Then use CF-Autoroot to gain root. After that same - install goomanager from Playstore and use it to install TWRP.
leaderbuilder said:
if you got MDL to activate you can jst take the OTA update to MF9. It will update it all.
Then use CF-Autoroot to gain root. After that same - install goomanager from Playstore and use it to install TWRP.
Click to expand...
Click to collapse
Awesome. Hey thanks again leader for helping me out. I'm usually never careless with these things. I use SACS rom but decided to try Miui. From some reason every time I flash Miui, I get the "Roaming Indicator Off" thing along with two signals. Reading the thread it suggest to format the internal. Why oh Why did I try that step. The rest is history....
Thanks again. Learned a lot with this process.
Glad you got it working.
There is a 'thanks' button too.
leaderbuilder said:
Glad you got it working.
There is a 'thanks' button too.
Click to expand...
Click to collapse
No doubt. I got to remember that!
Sent from my SPH-L720 using Tapatalk 4
Glad to hear you got it going.
Sent from my SPH-L720 using Tapatalk 4
leaderbuilder said:
Try downloading this file extract the tar and flash that in PC Odin. (don't check repartion!).
That is the full stock MF9 firmware, boot, recovery, kernel and ROM.
Then maybe use CF Autoroot, then goomanger to get twrp and flash one of your nand's
Click to expand...
Click to collapse
Thank you!
Ok so I was running CM 11 while i was on MK2 firmware....i flashed a wrong file now i am stuck, I can get into download mode.
My device is Sprint Galaxy S4 running the MK2 firmware, but i have no idea where to go because it will not boot up anymore and only goes into download mode, any ideas on how to fix?
Thanks
i flashed a wrong file now i am stuck
Click to expand...
Click to collapse
Boy that could be bad...
BUT if you get to Download mode you may be able to grab the full MK2 Odin-able .tar you should be Okay.
Please note that the sph-L720 is NOT the L720T. If you have that version and you flash this .tar you'll be hosed.
leaderbuilder said:
Boy that could be bad...
BUT if you get to Download mode you may be able to grab the full MK2 Odin-able .tar you should be Okay.
Please note that the sph-L720 is NOT the L720T. If you have that version and you flash this .tar you'll be hosed.
Click to expand...
Click to collapse
Ok thanks, i will try this and let you know later after its all downloaded and what happens!
RogSeve said:
Ok thanks, i will try this and let you know later after its all downloaded and what happens!
Click to expand...
Click to collapse
Make sure to Run Odin 'as administrator'.
From the zip just extract the .tar.md5 and place that into the PDA slot. Odin 3.09 seems to be working the best for most on this device.
leaderbuilder said:
Make sure to Run Odin 'as administrator'.
From the zip just extract the .tar.md5 and place that into the PDA slot. Odin 3.09 seems to be working the best for most on this device.
Click to expand...
Click to collapse
Yup just downloaded that odin actually, but i have to wait about an hour for that mk2 file to download. And thanks i know I've actually done this before but on mf9 so it was a little easier. Will this bring me back to stock?
Thanks
RogSeve said:
Yup just downloaded that odin actually, but i have to wait about an hour for that mk2 file to download. And thanks i know I've actually done this before but on mf9 so it was a little easier. Will this bring me back to stock?
Thanks
Click to expand...
Click to collapse
You'll be stock everything - baseband(modem), kernel, recovery and ROM.
You will have the knox bootloader, so when you flash a custom recovery you'll 'trip' that. But not really a big deal. You can remove the 'Knox software(s) if you want - there are some removal scripts here in the forums. Only thing is you can't Odin back before MJA/MK2.
To root you can use CF-Autoroot or Saferoot, then use Goomanager or find a recovery zip here and install custom recovery of your choice.
leaderbuilder said:
You'll be stock everything - baseband(modem), kernel, recovery and ROM.
You will have the knox bootloader, so when you flash a custom recovery you'll 'trip' that. But not really a big deal. You can remove the 'Knox software(s) if you want - there are some removal scripts here in the forums. Only thing is you can't Odin back before MJA/MK2.
To root you can use CF-Autoroot or Saferoot, then use Goomanager or find a recovery zip here and install custom recovery of your choice.
Click to expand...
Click to collapse
Ill try that later if it works, i might just stay on stock mk2 don't wanna mess anything else up....lol
RogSeve said:
Ill try that later if it works, i might just stay on stock mk2 don't wanna mess anything else up....lol
Click to expand...
Click to collapse
Ok so now when i try to open it up in odin it says hash value is invalid....any ideas on what to do for that?
leaderbuilder said:
You'll be stock everything - baseband(modem), kernel, recovery and ROM.
You will have the knox bootloader, so when you flash a custom recovery you'll 'trip' that. But not really a big deal. You can remove the 'Knox software(s) if you want - there are some removal scripts here in the forums. Only thing is you can't Odin back before MJA/MK2.
To root you can use CF-Autoroot or Saferoot, then use Goomanager or find a recovery zip here and install custom recovery of your choice.
Click to expand...
Click to collapse
Ok when i try to open the mk2 file it keeps saying the md5 hash is invalid. Ive tried 3 different odins to open it and i get the same result..
You don't open the .tar.md5 file.
You place this file - L720VPUEMK2_L720SPTEMK2_L720VPUEMK2_HOME.tar.md5 in the PDA slot.
RogSeve said:
Ok so I was running CM 11 while i was on MK2 firmware....i flashed a wrong file now i am stuck, I can get into download mode.
My device is Sprint Galaxy S4 running the MK2 firmware, but i have no idea where to go because it will not boot up anymore and only goes into download mode, any ideas on how to fix?
Thanks
Click to expand...
Click to collapse
have you tried heimdall? its unbricked me a few times, and its way easier to use too. i think you can use ob both windows and mac, i used on mac. if you are familiar with how to use a command line tool or terminal, this is the way to go. just my humble opinion.
I recently had some problems with being stuck at the "Samsung Galaxy S4" splash screen. Everything was fixed once I installed the .Tar files and can now go into the stock rom with ease. I rooted it again, and with Safestrap 3.6.5 it shows that DARTHSTALKER X1 is successful in installing but when I reboot it after Safestrap says "success" it goes form the "Samsung Galaxy S4" plash screen to a blank/black screen and the blue indicator lighter turns on. I've wiped the Rom slot1 (dalvik, system, data, cashe, etc). And i've deleted the ROM slot too and installed it again but it has not worked.
I was using the previous version of DARTHSTALKER but wanted more room and that is when my phone was stuck on the splash screen. I dont know what to do, maybe its the new ROM build or something messed up. Maybe i need a hard reset or im misssing a kernal? I need help guys. It still boots up to the stock ROM easily, but I dont know how to make it work. I've tried wiping it and reinstalling it about 5 times. I've also reinstalled Safestrap a couple of times.
HELP!
Safestrap 3.65 is for MF3 or 4.2.2. The rom above is for MK2 or 4.3.
BlackXLR8 said:
I recently had some problems with being stuck at the "Samsung Galaxy S4" splash screen. Everything was fixed once I installed the .Tar files and can now go into the stock rom with ease. I rooted it again, and with Safestrap 3.6.5 it shows that DARTHSTALKER X1 is successful in installing but when I reboot it after Safestrap says "success" it goes form the "Samsung Galaxy S4" plash screen to a blank/black screen and the blue indicator lighter turns on. I've wiped the Rom slot1 (dalvik, system, data, cashe, etc). And i've deleted the ROM slot too and installed it again but it has not worked.
I was using the previous version of DARTHSTALKER but wanted more room and that is when my phone was stuck on the splash screen. I dont know what to do, maybe its the new ROM build or something messed up. Maybe i need a hard reset or im misssing a kernal? I need help guys. It still boots up to the stock ROM easily, but I dont know how to make it work. I've tried wiping it and reinstalling it about 5 times. I've also reinstalled Safestrap a couple of times.
HELP!
Click to expand...
Click to collapse
You are using the wrong version of Safestrap. 3.71 is for mk2. 3.65 is for mf3.
http://forum.xda-developers.com/showthread.php?t=2448925
Kaze105 said:
Safestrap 3.65 is for MF3 or 4.2.2. The rom above is for MK2 or 4.3.
Click to expand...
Click to collapse
That makes a lot more sense. Thank you. I thought I had completely messed up my phone and couldnt flash any other rom.
Kaze105 said:
Safestrap 3.65 is for MF3 or 4.2.2. The rom above is for MK2 or 4.3.
Click to expand...
Click to collapse
That makes a lot more sense. Thank you. I thought I had completely messed up my phone and couldnt flash any other rom. You wouldnt happen to know how I could flash that ROM onto my S4? or where I could download the right files?
if you're on MK2 this is the post http://forum.xda-developers.com/showthread.php?t=2616221
you could also look around on the dev's section, just make sure you flash the correct rom for the correct version.
Help
hello I have got a problem a rooted phone, then instal savestrap 3.6.5 with packman KK 4.4 everything was ok but i wanted to delete the rest of data in phone. But i checked delete system data so the phone is now in a starting loop. With dead droid robot on screan. Is any way how to force the system into the phone?
Or do I have to put it in to the service?
Or it is completely dead?
Thanx for help. Dave
hajtla said:
hello I have got a problem a rooted phone, then instal savestrap 3.6.5 with packman KK 4.4 everything was ok but i wanted to delete the rest of data in phone. But i checked delete system data so the phone is now in a starting loop. With dead droid robot on screan. Is any way how to force the system into the phone?
Or do I have to put it in to the service?
Or it is completely dead?
Thanx for help. Dave
Click to expand...
Click to collapse
Do you have a rom you can flash in safe strap?
Sent from my Nexus 5
ROM
jd1639 said:
Do you have a rom you can flash in safe strap?
Sent from my Nexus 5
Click to expand...
Click to collapse
I have a rom which one was working as the latest one. But I have no official because it was on SD which is now deleted....I dont know save strap as PC program, only as andorid app....
I will very appreciate the manual how to get force the system...
hajtla said:
I have a rom which one was working as the latest one. But I have no official because it was on SD which is now deleted....I dont know save strap as PC program, only as andorid app....
I will very appreciate the manual how to get force the system...
Click to expand...
Click to collapse
Have you ever used adb? Google that and how to set it up on your pc. Then use adb push rom.zip /sdcard/
Sent from my Nexus 5
rom
jd1639 said:
Have you ever used adb? Google that and how to set it up on your pc. Then use adb push rom.zip /sdcard/
Sent from my Nexus 5
Click to expand...
Click to collapse
Now i get into recovery, by holding +- keys but I have not compatible ROM as it looks like every try for instalation is aborted...
hajtla said:
Now i get into recovery, by holding +- keys but I have not compatible ROM as it looks like every try for instalation is aborted...
Click to expand...
Click to collapse
This will fix it, but you'll lose everything on your phone. Odin the mf3 tar file.
Sent from my Nexus 5
what rom?
jd1639 said:
This will fix it, but you'll lose everything on your phone. Odin the mf3 tar file.
Sent from my Nexus 5
Click to expand...
Click to collapse
Thats not problem to lost data. I had it a while with not much data inside. So what do you recommand? mf3 is some special forcing system format? Do I have to put it into SD card and let update through installing app from SD card?
hajtla said:
Thats not problem to lost data. I had it a while with not much data inside. So what do you recommand? mf3 is some special forcing system format? Do I have to put it into SD card and let update through installing app from SD card?
Click to expand...
Click to collapse
Download Odin 1.85 to your pc.
Go to sammobile.com and download the mf3 firmware. It'll be a zip file, use 7-zip to extract the.tar.md5 file.
Open Odin on your pc and in the PDA slot browse to the.tar.md5 file
Boot your device into download mode and plug it into to your usb.
Start Odin
Sent from my Nexus 5
jd1639 said:
Download Odin 1.85 to your pc.
Go to sammobile.com and download the mf3 firmware. It'll be a zip file, use 7-zip to extract the.tar.md5 file.
Open Odin on your pc and in the PDA slot browse to the.tar.md5 file
Boot your device into download mode and plug it into to your usb.
Start Odin
Sent from my Nexus 5
Click to expand...
Click to collapse
Thanx for your advice, but the thing which is not clear for me is how to browse the md5 file in my phone? It should be done through Odin in PC?
But how to boot my XT894 into download mode? It is by holding the "+-" keys and install update through ADB?
Thanx for your answers. I very appreciate and hope then will be everything clear for me and I will recover it succesfully.
---------- Post added at 07:58 AM ---------- Previous post was at 07:44 AM ----------
hajtla said:
Thanx for your advice, but the thing which is not clear for me is how to browse the md5 file in my phone? It should be done through Odin in PC?
But how to boot my XT894 into download mode? It is by holding the "+-" keys and install update through ADB?
Thanx for your answers. I very appreciate and hope then will be everything clear for me and I will recover it succesfully.
Click to expand...
Click to collapse
PS: where exactly i can download the mf3 firmware? I browse the page but nothing found
hajtla said:
Thanx for your advice, but the thing which is not clear for me is how to browse the md5 file in my phone? It should be done through Odin in PC?
But how to boot my XT894 into download mode? It is by holding the "+-" keys and install update through ADB?
Thanx for your answers. I very appreciate and hope then will be everything clear for me and I will recover it succesfully.
---------- Post added at 07:58 AM ---------- Previous post was at 07:44 AM ----------
PS: where exactly i can download the mf3 firmware? I browse the page but nothing found
Click to expand...
Click to collapse
Mf3 tar file. http://forum.xda-developers.com/showthread.php?t=2504311
Sent from my Nexus 5
jd1639 said:
Mf3 tar file. http://forum.xda-developers.com/showthread.php?t=2504311
Sent from my Nexus 5
Click to expand...
Click to collapse
So I have downloaded and unzipped Tar files, I have run Odin 1.85, I have connected phone in AP fastboot Flash Mode and it says USB connected but in Odin I have no input on COM port.
What to do now? m I in the right mode?
And adb is not working too. it cant find phone. I have no push rom if its needed.
So I thing the phone is dead but if I press on dead droid screen +- then appears update from adb or sd card. So why is every rom aborted? Why it ODin does not recognize as connected device?
hajtla said:
So I have downloaded and unzipped Tar files, I have run Odin 1.85, I have connected phone in AP fastboot Flash Mode and it says USB connected but in Odin I have no input on COM port.
What to do now? m I in the right mode?
Click to expand...
Click to collapse
Yet different usb ports and make sure you use the cable that came with your phone. Usb most be 2.0 not 3.0
Sent from my Nexus 5
Repaired-recovered droid 4
jd1639 said:
Yet different usb ports and make sure you use the cable that came with your phone. Usb most be 2.0 not 3.0
Sent from my Nexus 5
Click to expand...
Click to collapse
So thanx for all your info. I recover my bricked XT894 by RSD and Stock zip rom.
Very usefull thing that RSD I have to say and I learnd very much in this few days about Motorola and android.:good:
I need help. lol. my Samsung note 3 is stuck in bootloop. I posted this in the thread for the hyperdrive rom because its what I was trying to flash.
i wiped and flashed in the stock slot. and now im stuck in the bootloop problem. it says recovery booting in the upper left of the screen and just keeps rebooting. I tried going in to odin and reloading the "n900v kk firmware" and nothing. anyone know a fix for this. is there something I can download to flash to fix this. I know I will have to use odin, just not sure what.
donelam304 said:
I need help. lol. my Samsung note 3 is stuck in bootloop. I posted this in the thread for the hyperdrive rom because its what I was trying to flash.
i wiped and flashed in the stock slot. and now im stuck in the bootloop problem. it says recovery booting in the upper left of the screen and just keeps rebooting. I tried going in to odin and reloading the "n900v kk firmware" and nothing. anyone know a fix for this. is there something I can download to flash to fix this. I know I will have to use odin, just not sure what.
Click to expand...
Click to collapse
Hi I'm kinda new to the community and Android, but I'll try to help. I've been having issues trying to use safestrap to install my custom roms. I know that 3.72 had issues with the extra slots. That was supposed to be fixed in 3.75. In short I haven't reached a loop but have had to flash to stock several times with Odin. I had to remove my battery to get the phone in "power off" mode. From there, I booted to download for odin (assuming you can get it to boot to download-volume down/home/power buttons to get there).
Once I got there, I just made sure I had the firmware version I wanted to go back to, plugged it into odin and bam! Back to stock to start over.
Bryotch said:
Hi I'm kinda new to the community and Android, but I'll try to help. I've been having issues trying to use safestrap to install my custom roms. I know that 3.72 had issues with the extra slots. That was supposed to be fixed in 3.75. In short I haven't reached a loop but have had to flash to stock several times with Odin. I had to remove my battery to get the phone in "power off" mode. From there, I booted to download for odin (assuming you can get it to boot to download-volume down/home/power buttons to get there).
Once I got there, I just made sure I had the firmware version I wanted to go back to, plugged it into odin and bam! Back to stock to start over.
Click to expand...
Click to collapse
I can boot in to the download mode. has no problem. even tried flashing the n900v_kk_firmware.tar.md5 tar,
ALL_N900VVRUBMJE_N900VVZWMJE_2106277_REV03_user_low_ship_MULTI_CERT.tar.md5
and even tried the N900VVRUCNC4_N900VVZWCNC4_N900VVRUCNC4_HOME.tar.md5
and when I do the MJE one it says invalid. am I flashing the wrong file is there something else I should be using. when I get in to manual mode after it boots in to manual recovery mode it says im on NC4. it says in the upper left corner the following:
Android stem recovery <3e>
KOT49H.N900VVRUCNC
volume up/down to move highlight;
power button to select.
reboot system now
apply update from ADB
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
is there a way to flash safestrap or CWM in odin.
donelam304 said:
I can boot in to the download mode. has no problem. even tried flashing the n900v_kk_firmware.tar.md5 tar,
ALL_N900VVRUBMJE_N900VVZWMJE_2106277_REV03_user_low_ship_MULTI_CERT.tar.md5
and even tried the N900VVRUCNC4_N900VVZWCNC4_N900VVRUCNC4_HOME.tar.md5
and when I do the MJE one it says invalid. am I flashing the wrong file is there something else I should be using. when I get in to manual mode after it boots in to manual recovery mode it says im on NC4. it says in the upper left corner the following:
Android stem recovery <3e>
KOT49H.N900VVRUCNC
volume up/down to move highlight;
power button to select.
reboot system now
apply update from ADB
apply update from external storage
wipe data/factory reset
wipe cache partition
apply update from cache
is there a way to flash safestrap or CWM in odin.
Click to expand...
Click to collapse
You're running the same build I have, been having similar issues. I used Odin no completely repartition and wipe the phone. I used N900VVRUCNC4_N900VVZWCNC4_N900VVRUCNC4_HOME.tar.md5 and the HLTE.pit file (for this build). In Odin You put the pit and md5 files in (.pit file in the PIT slot and md5 in the AP slot on Odin 3.09) This took me back to the KK NC4 build, granted, I lost alot of data but I didn't use a Nandroid backup either. This got me back to a functional device but i'm still having issues getting ANY custom roms to work. I did flash to NC2 kernel since then and still no luck. Let me know if that helps. I can get the files I used if you can't find them, but most everything came from xda.
PS. you can find some firmwares with recovery and other things added. I avoided these just to make sure I could get back to stock. I use Towelroot, BusyBox, SuperSU, and Safestrap 3.75 b04
Bryotch said:
You're running the same build I have, been having similar issues. I used Odin no completely repartition and wipe the phone. I used N900VVRUCNC4_N900VVZWCNC4_N900VVRUCNC4_HOME.tar.md5 and the HLTE.pit file (for this build). In Odin You put the pit and md5 files in (.pit file in the PIT slot and md5 in the AP slot on Odin 3.09) This took me back to the KK NC4 build, granted, I lost alot of data but I didn't use a Nandroid backup either. This got me back to a functional device but i'm still having issues getting ANY custom roms to work. I did flash to NC2 kernel since then and still no luck. Let me know if that helps. I can get the files I used if you can't find them, but most everything came from xda.
PS. you can find some firmwares with recovery and other things added. I avoided these just to make sure I could get back to stock. I use Towelroot, BusyBox, SuperSU, and Safestrap 3.75 b04
Click to expand...
Click to collapse
i done a search on the stock firmware you mentioned and after about 2 dozen websites and and trying about 15 flashes I finally got it to work. this has been one heck of a day. I finally got it to work. I am in the process of trying to get safestrap and stuff on it now. I already used towelroot to rot it. what version of safestrap do you recommend. I was told 3.72 was for KK. and 3.75 was for the Samsung galaxy S5.
donelam304 said:
i done a search on the stock firmware you mentioned and after about 2 dozen websites and and trying about 15 flashes I finally got it to work. this has been one heck of a day. I finally got it to work. I am in the process of trying to get safestrap and stuff on it now. I already used towelroot to rot it. what version of safestrap do you recommend. I was told 3.72 was for KK. and 3.75 was for the Samsung galaxy S5.
Click to expand...
Click to collapse
here is the link I found with all the carriers for the note 3
http://galaxynote3root.com/galaxy-note-3-repair/how-to-unroot-galaxy-note-3/
donelam304 said:
here is the link I found with all the carriers for the note 3
http://galaxynote3root.com/galaxy-note-3-repair/how-to-unroot-galaxy-note-3/
Click to expand...
Click to collapse
thanks so much by the way. I greatly appreciate the assistance.
EDIT: I have successfully installed the Alliance ROM. Here's how i did it.
Prerequisites:
Your phone at at least 50% battery
A charge cable
MicroSD card that you can plug into your computer
Odin 3.09
SafeStrap, version 3.75 APK on your MicroSD card
Alliance ROM on your MicroSD card
NCG tar.md5 (the big file, not the kernel)
I started off on a rooted 5.0 VZW Galaxy S5. After some confusion, I downgraded to NCG (4.4.2) using Odin. After doing that, I went to Towelroot, got the APK, rooted, downloaded SuperSU from the play store (I had to sign into google at this point), installed it's binaries (NORMALLY! Don't choose the TWRP method), rebooted when it asked me to. From there, I installed BusyBox from the play store and installed it within the app. Then I installed Safestrap (version 3.75), which I had on my MicroSD card. I used the app My Files to navigate to my MicroSD and installed the APK. Then I installed it within the app, and when the "reboot to recovery" button worked, I rebooted into SafeStrap recovery mode. At this point, the Alliance ROM zip file should ALREADY BE ON YOUR MICROSD CARD, WHICH SHOULD BE IN YOUR PHONE. Now, you're going to press the INSTALL button to the top right in Safestrap recovery, and you're going to navigate to your MicroSD card. It might be already opened to that. Then you're gonna select the Alliance ROM and flash it. After it successfully flashes, reboot into download mode (if for some reason you aren't able to do it immediately, you get into download mode by holding volume down, home button, and power button at the same time). Now, using Odin, you're gonna flash the firmware that the instructions in the Alliance thread tells you to (here's the thread: http://forum.xda-developers.com/ver.../rom-alliancerom-build-3-rom-control-t2818632). If everything works, it's gonna take a couple of minutes, optimize apps, and boot.
Huge thanks to Beans and his team for creating the Alliance mod, and huge thanks to Tulsadiver for helping me get through the process during my confusion.
Original thread below
Hi. I'll cut to the chase. I was an idiot and thought I could just flash the Alliance ROM from my SD card, but my phone is currently a factory restored 5.0. So, after unsuccessfully flashing Alliance ROM, I thought, well, I probably need to be on 4.4.2 to do this. So, what I'm wondering is, do I need to go back down to 4.4.2 to install Alliance ROM? And do I need Safestrap recovery to do it, or can I do it from stock recovery (home button+volUp+Power)? I did a lot of digging in the Alliance ROM post and there were no posts regarding my problem/question, probably because they're all experienced and I'm not (this is my first time trying to flash a custom ROM).
It SOUNDS like I need to flash a full stock tar using Odin, is that correct? Once I do that, I would be on stock wiped 4.4.2, I assume. From there, could I flash the Alliance ROM and continue with the instructions? Or do I need to root first and get safestrap and all that crap? I feel like Beans was really vague with his instructions on installing ROMs, but whatever. Please help though, I'm kind of stuck in the middle of this with a softbricked phone.
Thank you so much in advance, I appreciate it.
~isra
EDIT: Also, I was on ROOTED 5.0 Lollipop just before this. I just got so sick of lollipop, I was ready for something different. So here we are. To confirm, my phone is the standard retail SM-G900VZW model.
EDIT2: Apparently App Ops and SuperSU survived the wipe and, after downloading Root Checker, I can confirm that I'm still rooted... Huh.
israphial said:
Hi. I'll cut to the chase. I was an idiot and thought I could just flash the Alliance ROM from my SD card, but my phone is currently a factory restored 5.0. So, after unsuccessfully flashing Alliance ROM, I thought, well, I probably need to be on 4.4.2 to do this. So, what I'm wondering is, do I need to go back down to 4.4.2 to install Alliance ROM? And do I need Safestrap recovery to do it, or can I do it from stock recovery (home button+volUp+Power)? I did a lot of digging in the Alliance ROM post and there were no posts regarding my problem/question, probably because they're all experienced and I'm not (this is my first time trying to flash a custom ROM).
It SOUNDS like I need to flash a full stock tar using Odin, is that correct? Once I do that, I would be on stock wiped 4.4.2, I assume. From there, could I flash the Alliance ROM and continue with the instructions? Or do I need to root first and get safestrap and all that crap? I feel like Beans was really vague with his instructions on installing ROMs, but whatever. Please help though, I'm kind of stuck in the middle of this with a softbricked phone.
Thank you so much in advance, I appreciate it.
~isra
EDIT: Also, I was on ROOTED 5.0 Lollipop just before this. I just got so sick of lollipop, I was ready for something different. So here we are. To confirm, my phone is the standard retail SM-G900VZW model.
EDIT2: Apparently App Ops and SuperSU survived the wipe and, after downloading Root Checker, I can confirm that I'm still rooted... Huh.
Click to expand...
Click to collapse
Download busybox from play store. Install it. Install safestrap. Once recovery is installed, go into recovery, install alliance, from within safestrap, boot into download mode and flash the full firmware Odin tar.
Tulsadiver said:
Download busybox from play store. Install it. Install safestrap. Once recovery is installed, go into recovery, install alliance, from within safestrap, boot into download mode and flash the full firmware Odin tar.
Click to expand...
Click to collapse
Wait, so I don't need to downgrade my phone? Keep in mind I'm on stock rooted 5.0, which just got factory reset so I got nothing except for the root. Also, what full firmware odin tar are you referring to? NE9? This one: https://www.androidfilehost.com/?fid=23610159112652201
Or this one: https://www.androidfilehost.com/?fid=23622183712472727
I'm getting these links from here: http://forum.xda-developers.com/ver...ment/stock-collection-kernels-modems-t2842069
I really appreciate you replying. Thank you.
The first one. That firmware will downgrade you to NE9.
Tulsadiver said:
The first one. That firmware will downgrade you to NE9.
Click to expand...
Click to collapse
Ok, so I don't need to downgrade to install the ROM. Got it. Thank you. Is there anything else I should know?
Not that I know of. ROM installations are different so always refer to their installation instructions. Some will say to flash the firmware first. The op knows best. Alliance NE9 says to do a full wipe (everything but SD card). Install the ROM, reboot to download mode ( don't hit reboot system). Once in download mode, flash the firmware tar and let your phone reboot.
Tulsadiver said:
Not that I know of. ROM installations are different so always refer to their installation instructions. Some will say to flash the firmware first. The op knows best. Alliance NE9 says to do a full wipe (everything but SD card). Install the ROM, reboot to download mode ( don't hit reboot system). Once in download mode, flash the firmware tar and let your phone reboot.
Click to expand...
Click to collapse
So, I installed Safestrap and did all that, but when I press the reboot into recovery button, it just reboots the phone normally. It doesn't go into safestrap recovery. Am I supposed to hold some buttons or something?
Did safestrap ask for SuperSU permissions? Did you install busy box? You can't just download the app.
Tulsadiver said:
Did safestrap ask for SuperSU permissions? Did you install busy box? You can't just download the app.
Click to expand...
Click to collapse
Yes, I've installed BusyBox and given SS root permissions. I installed the APK 3.75 Safestrap that I used to get into SS recovery when I was getting to rooted 5.0 a while back, so I know that the APK isn't corrupt or anything like that.
I forgot. You are on lollipop. You need to flash the NE9 kernel first ( via Odin). You already have safestrap but it doesn't work on lollipop. After you flash the NE9 kernel you will have the option to boot into recovery. Have alliance on your SD card ready to install.
Tulsadiver said:
I forgot. You are on lollipop. You need to flash the NE9 kernel first ( via Odin). You already have safestrap but it doesn't work on lollipop. After you flash the NE9 kernel you will have the option to boot into recovery. Have alliance on your SD card ready to install.
Click to expand...
Click to collapse
Found a "NE9 Stock tar.md5". Does that sound right? DL is here: https://www.androidfilehost.com/?fid=23578570567721275
Found a "NE9 Stock tar.md5". Does that sound right? DL is here: https://www.androidfilehost.com/?fid=23578570567721275
israphial said:
Found a "NE9 Stock tar.md5". Does that sound right? DL is here: https://www.androidfilehost.com/?fid=23578570567721275
Click to expand...
Click to collapse
That is it.
Tulsadiver said:
That is it.
Click to expand...
Click to collapse
Thank you. I'm going to flash the kernel then, then I'll get back to you if anything comes up. Again, I really appreciate you helping me. Thank you.
Tulsadiver said:
That is it.
Click to expand...
Click to collapse
It booted into stock recovery mode after odin successfully flashed NE9. Now do I install the ROM from stock recovery, or do I boot the phone and get to Safestrap to install the ROM from Safestrap recovery? I am currently in recovery mode.
You must not have had safestrap on your phone after all. Can you get back to download mode? You probably need to flash your lollipop kernel to get back to lollipop.
Tulsadiver said:
You must not have had safestrap on your phone after all. Can you get back to download mode? You probably need to flash your lollipop kernel to get back to lollipop.
Click to expand...
Click to collapse
I definitely had safestrap. Though, here's something: Everyone talks about a menu that pops up during boot that allows you to enter either safestrap recovery, or boot, and I've never had/seen that menu, even when I was rooting 5.0. Yes, my BusyBox worked and was properly installed, and yes, I had Safestrap recovery installed.
I just tried rebooting and it after sitting at the first screen for a while, it rebooted quickly and went back into recovery mode. What if I try installing Alliance from recovery mode? Will it work?
israphial said:
I definitely had safestrap. Though, here's something: Everyone talks about a menu that pops up during boot that allows you to enter either safestrap recovery, or boot, and I've never had/seen that menu, even when I was rooting 5.0. Yes, my BusyBox worked and was properly installed, and yes, I had Safestrap recovery installed.
I just tried rebooting and it after sitting at the first screen for a while, it rebooted quickly and went back into recovery mode. What if I try installing Alliance from recovery mode? Will it work?
Click to expand...
Click to collapse
I've never been on stock recovery before. I think it has to be a custom recovery. You might need to pull your battery and let it set for a bit and see if you can get into download mode.
Tulsadiver said:
I've never been on stock recovery before. I think it has to be a custom recovery. You might need to pull your battery and let it set for a bit and see if you can get into download mode.
Click to expand...
Click to collapse
I can get into download mode perfectly fine. I'm going to kernel back to 5.0 then...
But what do I do now? Should I downgrade to 4.4.2 with the stock firmware once I successfully boot 5.0?
EDIT: Yup, booted 5.0 perfectly fine. Now what? Downgrade to 4.4.2 and flash the NE9 Kernel?
Proof that Safestrap is on my phone:
http://imgur.com/cGa1v1n