[Q] deleted wpa_supplicant.conf - Galaxy S 4 Q&A, Help & Troubleshooting

Hi everyone, I need a help. So I have problem with the WiFi ( it's light green ) , so I rooted my phone got Solid Explorer , and I have read in another forum that it will help if you rename or delete that file : "wpa_supplicant.conf" from the path /data/misc/wifi or /system/etc/wifi. I tried to rename them both in both directories , didn't work, so I decided to delete them both as well. It's supposed to create a new ones when you turn the wifi on but that never happend for me. So now I don't have any of those files, and even worse my WiFi button doesn't even turn any green , just stays grey. Can I restore them somehow? Or what should I do now? I'm getting lost.. Thank you!
P.S. I'm with 5.0.1. Lollipop all stock firmwares and everything, Galaxy S4 GT-I9500

Try to reflash the fimrware you are on. That won't wipe anything.

How do I do that?

cvetelinay said:
How do I do that?
Click to expand...
Click to collapse
Have you tried a reboot? It should create a new one.
And I don't see how that would affect the activation of the Wi-Fi as it only has some configurations stuff. It's basically a "settings" file for the wifi.

Well yes I did try to reboot few times. I have no idea how that file affected the WiFi, but it's a fact. Before I deleted that file the button was staying lightly green for a while than it was turning off, but since I deleted it it doesn't even react like I'm not even touching it (stays gray). And now there is another problem with my firmware . I bought my phone from amazon and its originally from Brazil (its unlocked) BUT now since I'm trying to fix that WiFi issue I discovered that the firmwares has the XX code for the region which I made a search for and its for Poland and etc, but deffinately not Brazil, I live in Bulgaria . I had the UB code (for Brazil) since I was with the KitKat android. And I'm confused now which firmwares should I reflash to try to restore that system file? Could that cause the problem with the WiFi? I need to say my phone updated by itself I didn't do anything. Thank you

Related

After Restore to Factory Setting , every lost

Hi all, I am just depressed, I have tried to root my Defy + , and finaly I found that my version cant be root at the moment, so I decided to Restore to Factory Setting because I think after trying so many root software and failed, it;s better to go back to defult setting, than I am so shock when I see my phone again :
THe lockbar is lost, and also every defult app, and I count have a slide unlock bar, it said I can only make phone calls, and that's it, nothing eles, I cant do anything on it, is that because I have tried so many root softwares so it become liek that?
Or is it just normal and that's solution that I can hae the apps and slidelockbar ?
Please kindly give me some advice, I am so helpless
I have never seen something like that, now that is all off, try flashing it with some stock sbf, i'm sure you will find many of them in the development section, i'm sorry for your loss
Hey, don't panic. Nothing is lost. Just find here proper to your version SBF and burn it with RSDLite.
difr said:
Hey, don't panic. Nothing is lost. Just find here proper to your version SBF and burn it with RSDLite.
Click to expand...
Click to collapse
I went to the Motorola shop today , and actually it's just some se4tting problem , now it's working fine, and the problem I make is the sim card I placed in the phone was different , so the Motorola locked it , and the staff said this function is onlt Motorola phone having : 0

Weird Wifi/bluetooth Issue. Kinda unique. Need help

Ok. This is my first time posting here in the forum hopefully i can explain this thoroughly and get some good help.
My friend has brought me by his gs4 that he wanted first to only be unlocked. It went from this simple task to a huge one. Im slightly technically inclined but im just starting with phones.
First issue. Found that alot was broken on the phone.(charge port , camera, casing dinged) I replaced his camera, got him a new charge port, and install a new back and rim. The phone now looks like new.
I then tried to figure out a free way to unlock.
I dont have all the links to what i did but this is how it went (while he was on ni1 baseband).
I rooted with towel root, installed safeboot, flashed a mf3 modem, and used region lockaway, and profit he was able to connect to tmobile.
i then flashed back to ni1 modem just for consistency.
Now after getting that issue done i handed it to him and he immediately handed it back to me because wifi didnt work. after further research i noticed that wifi nor, bluetooth , or tethering worked.
So i looked up all this fixes with the wpa supplicant file. I delete and moved files around and sometimes i would get wifi but id also get issues like the screen not turning back on in stock and id have to either hold the power button for a long time or pull the battery to reset.
he suggested that we flash a rom so i chose the echo rom from this link.
*cant post link cause im too new*
(this unit has a locked bootloader so flashing a new kernel - which im %100 sure would fix this - is not possible)
i flash the rom, the ni1 modules, the customizations, and a updated su.
when in the new rom i tried wifi again and it doesnt work.
So i then started reading more into the supplicant files and noticed the system folder version has wlan0. i tried replacing the supplicant file in the data folder with this one and still no wifi. i replaced that supplicant file with a supplicant file i backed up before installing the new rom. I go in the file and view its contents after it failing to boot wifi yet again and notice that it actually says my model number is i337. i then delete this file and just reboot. When i reboot wifi and bluetooth come back on simultaneously but when i power off the screen it freezes. I reboot and view the supplicant contents. It now has i9505 as the phones model number in the file. I delete it again and reinstall the old supplicant file and the wifi now doesnt work and the screen doesnt freeze.
i look in the about tab in the phones setting and for some reason this rom does say this phone is a i9505 but im %100 sure this is a att.
What exactly is happening? why cant i get the wifi to work properly? and when it does why does the screen not wake up?
jarool112 said:
Ok. This is my first time posting here in the forum hopefully i can explain this thoroughly and get some good help.
My friend has brought me by his gs4 that he wanted first to only be unlocked. It went from this simple task to a huge one. Im slightly technically inclined but im just starting with phones.
First issue. Found that alot was broken on the phone.(charge port , camera, casing dinged) I replaced his camera, got him a new charge port, and install a new back and rim. The phone now looks like new.
I then tried to figure out a free way to unlock.
I dont have all the links to what i did but this is how it went (while he was on ni1 baseband).
I rooted with towel root, installed safeboot, flashed a mf3 modem, and used region lockaway, and profit he was able to connect to tmobile.
i then flashed back to ni1 modem just for consistency.
Now after getting that issue done i handed it to him and he immediately handed it back to me because wifi didnt work. after further research i noticed that wifi nor, bluetooth , or tethering worked.
So i looked up all this fixes with the wpa supplicant file. I delete and moved files around and sometimes i would get wifi but id also get issues like the screen not turning back on in stock and id have to either hold the power button for a long time or pull the battery to reset.
he suggested that we flash a rom so i chose the echo rom from this link.
*cant post link cause im too new*
(this unit has a locked bootloader so flashing a new kernel - which im %100 sure would fix this - is not possible)
i flash the rom, the ni1 modules, the customizations, and a updated su.
when in the new rom i tried wifi again and it doesnt work.
So i then started reading more into the supplicant files and noticed the system folder version has wlan0. i tried replacing the supplicant file in the data folder with this one and still no wifi. i replaced that supplicant file with a supplicant file i backed up before installing the new rom. I go in the file and view its contents after it failing to boot wifi yet again and notice that it actually says my model number is i337. i then delete this file and just reboot. When i reboot wifi and bluetooth come back on simultaneously but when i power off the screen it freezes. I reboot and view the supplicant contents. It now has i9505 as the phones model number in the file. I delete it again and reinstall the old supplicant file and the wifi now doesnt work and the screen doesnt freeze.
i look in the about tab in the phones setting and for some reason this rom does say this phone is a i9505 but im %100 sure this is a att.
What exactly is happening? why cant i get the wifi to work properly? and when it does why does the screen not wake up?
Click to expand...
Click to collapse
Did you try flashing the stock NB1 ODIN? Try that first. I don't know why the Wi-Fi issues would happen, but it's best to start there and try to fix it.
Sent from my SGH-I337
Thanks im gonna give it a try tonight and ill post back if works and the full method i go through.
jarool112 said:
Thanks im gonna give it a try tonight and ill post back if works and the full method i go through.
Click to expand...
Click to collapse
your friend has the Chinese knock off which is a real frankenstein. FW reports it to be a sgh-i337 but SN or IMEI say it is a i9505.
Check here and tell us what you get:
Code:
imei.info
sndeep.info
We may be able to help you out better if we know whether or not this is the real chinese knock off or not.
Salutations.
@DeadlySin9
i tried the stock tar flashing. I flash with a tar located here :
http://forum.xda-developers.com/showthread.php?t=2674223
with odin 3.09
it got back to stock but if the screen cuts off it still freezes and the wifi did come up but bluetooth was enabled.
@VladimirMan93
no that would be very wierd. if it was it a very very good knock off. lol. but i am about to check the files after applying towelroot

Yotaphone 2 reboots by itself after after the screen switches off.

Hello
I have a Yotaphone 2 running android 5.0. I have a huge problem with the device which is, that the phone reboots automatically all by itself after the screen turns off. The screen timeout is set at 1 minute and once the screen goes off, the phone reboots! I don't know what the problem is but its making me crazy!
Note: The phone does not reboot if the screen doesn't turn off. So I changed the screen timeout to 30minutes. Also note that Wi-Fi doesn't start immediately. It doesn't even start most of the time and is stuck at "turning on"! And also, the phone isn't detecting my SIM Card!
Hope someone can solve my problem.
Wow, seems a lot of problems here. However you provided very few info about your phone.
1) Where did you buy it?
2) What have you done after you opened it, OTA? Which firmware was installed?
3) Have you tried factory reset by wiping data in the stock recovery? (Accessible with Vol+ and Power)
4) Have you tried to flash from scratch the RU .124 firmware with YotaFlasher?
5) The phone was behaving normally before or it's doing this as soon as you started using it?
I got the phone as a gift
TheArt. said:
Wow, seems a lot of problems here. However you provided very few info about your phone.
1) Where did you buy it?
2) What have you done after you opened it, OTA? Which firmware was installed?
3) Have you tried factory reset by wiping data in the stock recovery? (Accessible with Vol+ and Power)
4) Have you tried to flash from scratch the RU .124 firmware with YotaFlasher?
5) The phone was behaving normally before or it's doing this as soon as you started using it?
Click to expand...
Click to collapse
-The phone was a gift from "Aramex Company".
-Yes, I have factory reset it! Note: It wasn't possible to reset it from settings because it would always get stuck in "Shutting Down" phase and nothing would happen. So I hard reset it.
-I found something strange going on though. Whenever I reset it, It would restart (after the reset is over) and say that "ANDROID IS UPGRADED TO 5.0".
I think it is upgrading by itself to 5.0.
-No, I haven't tried any flashing.
-Yes, the phone was working fine for a while and then started behaving like this!
Cheers!
(Thank You for your support and attention by the way)
Video
Hello!
I have made a video showing what the problems are! Please give me your e-mail so that I can send you the "Dropbox" link to the video.
Thank You!
I think the first thing to do here is to flash a clean firmware (RU or EU) on your phone via YotaFlasher, search here on xda how, and then report back if it's happen again! Seems that the firmware it was shipped with wansn't so stable.
Flashed it!
TheArt. said:
I think the first thing to do here is to flash a clean firmware (RU or EU) on your phone via YotaFlasher, search here on xda how, and then report back if it's happen again! Seems that the firmware it was shipped with wansn't so stable.
Click to expand...
Click to collapse
Hey!
As you had prescribed, I flashed it! First I flashed it with Android 5.0.0-ME1.1.60 and after opening the phone I used it for a while and the phone was same as before flashing! There was no difference at all! The phone was restarting on turning screen off as usual, the WiFi wasn't turning on, and the SIM wasn't being recognized!
But then I flashed it with Android 4.4.3-S01-003-ME1.0.3.61a and the phone is still rebooting by itself upon switching the screen off and the WiFi problem still persists! The WiFi just simply won't turn on. It's stuck at "turning on"! The SIM isn't recognized either! Also, the phone is restarting from the inside now (It wasn't restarting before. I had to keep the power button pressed every time I wanted to restart)! But NOTE that the phone still cannot be just shut down, it can only be restarted!
I don't know what to do!
Cheers
can you please help me find 4.4.3-S01-003-ME1.0.3.61a firmware. i tried yotaflasher and i cant make the program work. it exits close itself. i couldnt find any firmware folder in yotadevices ftp too. can you help me found the spesific firmware please?
Why are you unable to make yotaflasher work
lgk350tr said:
can you please help me find 4.4.3-S01-003-ME1.0.3.61a firmware. i tried yotaflasher and i cant make the program work. it exits close itself. i couldnt find any firmware folder in yotadevices ftp too. can you help me found the spesific firmware please?
Click to expand...
Click to collapse
Hi lgk350tr,
Why are you unable to make yotaflasher work, it is a pretty simple application. Have you tried to see instruction videos on YouTube on how to use it? Instructions are also available on XDA Developers' website. ( https://forum.xda-developers.com/yotaphone-one/general/yota-flasher-download-t3480922 )
Don't hesitate to contact, for any problem!
Cheerio
Please help..................I spent 800 USD on this phone and I can't use it
Can someone freaking help me with my phone's problem, I have spent 800 US Dollars buying that phone, and I can't even use it! It has been 6 months since I opened this thread and no one has helped me yet!
PLEASE HELP..............................................................:crying::crying::crying:
akahomeacc said:
Can someone freaking help me with my phone's problem, I have spent 800 US Dollars buying that phone, and I can't even use it! It has been 6 months since I opened this thread and no one has helped me yet!
PLEASE HELP..............................................................:crying::crying::crying:
Click to expand...
Click to collapse
Try flashing the hybrid modem mentioned in the general guide (Part 2).
Try flashing 2 times before rebooting.
If nothing helps, you could try lineageos, @angelll123 made a lengthy guide how to that in the post quoted here , also check my comment.
Is this what you mean?
tomgaga said:
Try flashing the hybrid modem mentioned in the general guide (Part 2).
Try flashing 2 times before rebooting.
If nothing helps, you could try lineageos, @angelll123 made a lengthy guide how to that in the post quoted here , also check my comment.
Click to expand...
Click to collapse
I have attached a screenshot of the Yotaphone 2 General guide page, I want to know if you are referring to the text that I highlighted in the screenshot!
Thank You
I do experience similar issue, but only recently. I haven't done anything like flashing or upgrading my phone, it started by itself .
I am experiencing reboots whenever battery drops below about two thirds of its capacity. Also, charging and handling some load prevents this.
Note that my Yotaphone has both displays damaged. Still working though.

New flashed rom has things I never had

Hi guys!
So I have a S7E 935F unlocked.
I tried to root the device and did everything as written and shown in every tutorial but it failed to do so.
After flashing recovery TWRP and trying to flash SuperSU the device just got into a boot loop.
I was reading around and understood that this is a problem due to encryption of the FS.
So I downloaded my firmware from sammobile and flashed my device again, everything got back to normal.
Well, almost normal. The rom I have has the same build number, version, kernel, everything is the same as the original one only that I have things in the settings menu I never has, like I have "apps" twice, one for apps permissions etc and one for apps manager, I also have "T roaming" no idea what it is, never had it, I have "service provider KT twophone".
Also the settings app crash a lot, browser gets stuck a lot, can't change system language to English (app crash).
At the home screen I Samsung Pay which I never had and I have some sort of a news app integrated on my home screen and it's marked with two stripes.
I verified this is a global rom for my country, not by any mobile company as before, I really don't have a clue what to do.
Can someone please advise?
T roaming and KT twophone service are both from korean carriers, maybe you have a wrong CSC installed or your /efs/imei/mps_code.dat is messed up.
Try to download and install the latest firmware of your region using Samfirm and if it still doesn't solve the problem, open up /efs/imei/mps_code.dat and see if matches your region name.
OK so I D/L the firmware again and same thing...
I checked /efs folder and its empty, maybe the content is hidden? Anyways my device has its IMEI and I can use it to make calls... thoughts?
roeio82 said:
OK so I D/L the firmware again and same thing...
I checked /efs folder and its empty, maybe the content is hidden? Anyways my device has its IMEI and I can use it to make calls... thoughts?
Click to expand...
Click to collapse
You need smart switch on your pc, enter your imei number in smart switch and it will download correct firmware according to your imei, then flash it. Good Luck
Sent from my SM-G935F using Tapatalk
Hi the same thing happend to me in settings but did downloading the firmware via smart switch change the settings and if so how do you do this
Tommmy5555 said:
Hi the same thing happend to me in settings but did downloading the firmware via smart switch change the settings and if so how do you do this
Click to expand...
Click to collapse
Hello, this smart switch method is obsolete. Use odin to re-flash your stock rom in case of any issues. Be sure to use correct and matching binary firmware.

Help with NFC Crashing - AT&T S8 Active

Hey,
Need some help. My brand new AT&T S8 Active arrived yesterday. Since I am located outside the US I'm stuck with utilising Odin to update the software.
The current version listed on the AT&T website was 5CSK1 and I was able to track down the update:
https://forum.xda-developers.com/showpost.php?p=81251867&postcount=743
It installed successfully, everything is going well however I am unable turn on NFC. The toggle found in the settings menu is off and when I attempt to switch it on it greys out for a few seconds then the 'NFC keeps stopping' error appears on the bottom of the screen.
I've cleared the cache/data for the NFC app - no luck,
I've performed a factory reset via recovery menu - no luck.
I've installed the previous build 5CSJ3 from: https://forum.xda-developers.com/showpost.php?p=80903399&postcount=187 with a factory reset straight after - no luck.
I'm currently back on the latest K1 build.
Logcat shows errors with 'libnfc_nci' and a 'Fatal Exception' for the 'com.android.nfc' process. And to top it all off the NFC app is draining my battery.
If anyone can help me that would be awesome.
dchalkley said:
Hey,
Need some help. My brand new AT&T S8 Active arrived yesterday. Since I am located outside the US I'm stuck with utilising Odin to update the software.
The current version listed on the AT&T website was 5CSK1 and I was able to track down the update:
https://forum.xda-developers.com/showpost.php?p=81251867&postcount=743
It installed successfully, everything is going well however I am unable turn on NFC. The toggle found in the settings menu is off and when I attempt to switch it on it greys out for a few seconds then the 'NFC keeps stopping' error appears on the bottom of the screen.
I've cleared the cache/data for the NFC app - no luck,
I've performed a factory reset via recovery menu - no luck.
I've installed the previous build 5CSJ3 from: https://forum.xda-developers.com/showpost.php?p=80903399&postcount=187 with a factory reset straight after - no luck.
I'm currently back on the latest K1 build.
Logcat shows errors with 'libnfc_nci' and a 'Fatal Exception' for the 'com.android.nfc' process. And to top it all off the NFC app is draining my battery.
If anyone can help me that would be awesome.
Click to expand...
Click to collapse
ugh, the active line... there hasnt ever been much support for those. All you can really do is keep flashing the stock firmware and hope that the errors resolve themselves.
Side note: have you noticed how they stopped making the active phones? They were a dismal failure. All they are is the regular phone in a case that you cant take off :/
dchalkley said:
Hey,
Need some help. My brand new AT&T S8 Active arrived yesterday. Since I am located outside the US I'm stuck with utilising Odin to update the software.
The current version listed on the AT&T website was 5CSK1 and I was able to track down the update:
https://forum.xda-developers.com/showpost.php?p=81251867&postcount=743
It installed successfully, everything is going well however I am unable turn on NFC. The toggle found in the settings menu is off and when I attempt to switch it on it greys out for a few seconds then the 'NFC keeps stopping' error appears on the bottom of the screen.
I've cleared the cache/data for the NFC app - no luck,
I've performed a factory reset via recovery menu - no luck.
I've installed the previous build 5CSJ3 from: https://forum.xda-developers.com/showpost.php?p=80903399&postcount=187 with a factory reset straight after - no luck.
I'm currently back on the latest K1 build.
Logcat shows errors with 'libnfc_nci' and a 'Fatal Exception' for the 'com.android.nfc' process. And to top it all off the NFC app is draining my battery.
If anyone can help me that would be awesome.
Click to expand...
Click to collapse
Might try redownloading a different firmware from a differ location. I had this issue on a lg back in the day the camera wouldnt work no matter what I always restored stock with one firm I had. And it ended up being a bad download. Another possibility is a bad NFC chip. If it's new I'd have it warranted
Thankyou, Thankyou Youdoofus and TheMadScientist for your advice.
Woke up early today (3am) with coffee in hand I tried again downloading the K1 and J3 builds; neither worked.
Unfortunately there's no alternative download for them... Google points to the XDA forums which seem to come from some Russian forum.
I've gone to an earlier build - 5CSI3 - https://forum.xda-developers.com/showpost.php?p=80505887&postcount=186 which works.
So it's not a NFC chip issue, yay. Now, just need to figure out what I'll do when the next update hits at the end of this month.
dchalkley said:
Thankyou, Thankyou Youdoofus and TheMadScientist for your advice.
Woke up early today (3am) with coffee in hand I tried again downloading the K1 and J3 builds; neither worked.
Unfortunately there's no alternative download for them... Google points to the XDA forums which seem to come from some Russian forum.
I've gone to an earlier build - 5CSI3 - https://forum.xda-developers.com/showpost.php?p=80505887&postcount=186 which works.
So it's not a NFC chip issue, yay. Now, just need to figure out what I'll do when the next update hits at the end of this month.
Click to expand...
Click to collapse
Make sure your using the latest odin build 3.13. I dont have an active. **** I read it wrong so it does work on other builds?
TheMadScientist said:
Make sure your using the latest odin build 3.13. I dont have an active. **** I read it wrong so it does work on other builds?
Click to expand...
Click to collapse
Yeah, it's working on the 5CSI3 build from October 2019, there's been two recent updates since then (and another will come at the end of the month). I don't know what's happening as no one else has reported this issue .
Just wanting to be on the most recent version for security and the annoyance of having data wiped every update.
Edit: Yeah, Odin v3.13.1 . No errors being displayed, all green.
This issue is very likely to be caused by 3rd party sim unlock or FRP removal and meddling with knox.
I have been trying to get around this problem and it seems it is either a security measure to disable nfc payments on triggering knoxguard or problem with modem.
this problem started after CSJ3 update afaik and only on some phones, if someone can explain this would be great.
Solution:
You will lose all data so backup is recommended
Remove your SIM card, re-install the firmware with ODIN and check Nand Erase auto reboot and F. reset time
Check your KG status(checking or prenormal) on the bootloader, and in settings>device care you will see Security is disabled and it crashes when you click it.
I also noticed the settings menu is weird with many broken options and dailer codes dont work anymore.
EDIT: Workaround Solution:
THIS IS FOR G892A ONLY who have problem with NFC after updating to builds after December 2019
Disclaimer: do at your own risk and can break your phone signal or system detected as rooted/custom
note: you will lose all data, ONLY check "Auto Reboot" and "F. Reset Time" in odin
1) Backup your data
2) Delete your google account, so FRP : OFF in bootloader (this can cause problems if not done)
3) Flash 5 firmware files G892AUCS5CTC1 (latest rom with march 2020 security) and get back to bootloader
4) Flash 3 files from G892AUCS5CSI3 : BL, CP and CSC
(odin will say PASS, but recovery will give error)
5) select wipe data partition then reboot to system
when the phone starts you will see NFC logo in statusbar means you are successful
if you get errors while using odin: flash combination file : G892AUCU5ASD1 if this doesnt work it means you have different problem (cable, socket, pc, bad chip)
i tried flashing CP file only and phone booted into UPLOAD mode, so dont panic if you get into UPLOAD mode just reboot with 3 buttons to recovery and start over
Vcek said:
This issue is very likely to be caused by 3rd party sim unlock or FRP removal and meddling with knox.
I have been trying to get around this problem and it seems it is either a security measure to disable nfc payments on triggering knoxguard or problem with modem.
this problem started after CSJ3 update afaik and only on some phones, if someone can explain this would be great.
Solution:
You will lose all data so backup is recommended
Remove your SIM card, re-install the firmware with ODIN and check Nand Erase auto reboot and F. reset time
Check your KG status(checking or prenormal) on the bootloader, and in settings>device care you will see Security is disabled and it crashes when you click it.
I also noticed the settings menu is weird with many broken options and dailer codes dont work anymore.
EDIT: Workaround Solution:
THIS IS FOR G892A ONLY who have problem with NFC after updating to builds after December 2019
Disclaimer: do at your own risk and can break your phone signal or system detected as rooted/custom
note: you will lose all data, ONLY check "Auto Reboot" and "F. Reset Time" in odin
1) Backup your data
2) Delete your google account, so FRP : OFF in bootloader (this can cause problems if not done)
3) Flash 5 firmware files G892AUCS5CTC1 (latest rom with march 2020 security) and get back to bootloader
4) Flash 3 files from G892AUCS5CSI3 : BL, CP and CSC
(odin will say PASS, but recovery will give error)
5) select wipe data partition then reboot to system
when the phone starts you will see NFC logo in statusbar means you are successful
if you get errors while using odin: flash combination file : G892AUCU5ASD1 if this doesnt work it means you have different problem (cable, socket, pc, bad chip)
i tried flashing CP file only and phone booted into UPLOAD mode, so dont panic if you get into UPLOAD mode just reboot with 3 buttons to recovery and start over
Click to expand...
Click to collapse
Hello There!..kind of new about this so..long story short..
Phone had Android 8, and I really love Night mode on Android 9, so...I've found BL, AP, CP, CSC, USER Data ROM for GALAXY S8 ACTIVE AT&T Unlocked, however..I am a little bit afraid of any NAND Erase.
I am not an expert, but I can tell you are. By any chance do you have any vide or graphic tutorial abot how you can perform these actions? It is very odd that I am unable to have any *# codes working, and lately, I've received this odd message about NFC Service has stopped, so...any graphic step by step guide will be highly appreciated it.
I've tried ....soft reset, then factory reset, then flash again ODIN (BL, AP,CP, CSC and USER DATA ) But I have no idea how to back up my data, and it will be very helpful to have G892AUCS5CSI3 as well.
Thank you very much for your time, I hope you can help me and I appreciate very much your time.
The one that I have is AP_G892AUCS5CTC1_CL16888298_QB29841048_REV00_user_low_ship_MULTI_CERT_meta_OS9.tar
BL_G892AUCS5CTC1_CL16888298_QB29841048_REV00_user_low_ship_MULTI_CERT.tar
CP_G892AUCS5CTC1_CP15398738_CL16888298_QB29841048_REV00_user_low_ship_MULTI_CERT.tar
CSC_ATT_G892AATT5CTC1_CL16888298_QB29841048_REV00_user_low_ship_MULTI_CERT.tar
USERDATA_G892AUCS5CTC1_CL16888298_QB29841048_REV00_user_low_ship_MULTI_CERT.tar
SOLVED!
So...I've followed the steps to install only BL, CP and CSC using G892AUCS5CSI3...however, the system started as usual, and actually did not work =(
RESOLUTION:
INSTALL THE FULL G892AUCS5CSI3. Worked as magic =)
thank you for the thread!!
moncd6 said:
Hello There!..kind of new about this so..long story short..
Phone had Android 8, and I really love Night mode on Android 9, so...I've found BL, AP, CP, CSC, USER Data ROM for GALAXY S8 ACTIVE AT&T Unlocked, however..I am a little bit afraid of any NAND Erase.
I am not an expert, but I can tell you are. By any chance do you have any vide or graphic tutorial abot how you can perform these actions? It is very odd that I am unable to have any *# codes working, and lately, I've received this odd message about NFC Service has stopped, so...any graphic step by step guide will be highly appreciated it.
I've tried ....soft reset, then factory reset, then flash again ODIN (BL, AP,CP, CSC and USER DATA ) But I have no idea how to back up my data, and it will be very helpful to have G892AUCS5CSI3 as well.
Thank you very much for your time, I hope you can help me and I appreciate very much your time.
The one that I have is AP_G892AUCS5CTC1_CL16888298_QB29841048_REV00_user_low_ship_MULTI_CERT_meta_OS9.tar
BL_G892AUCS5CTC1_CL16888298_QB29841048_REV00_user_low_ship_MULTI_CERT.tar
CP_G892AUCS5CTC1_CP15398738_CL16888298_QB29841048_REV00_user_low_ship_MULTI_CERT.tar
CSC_ATT_G892AATT5CTC1_CL16888298_QB29841048_REV00_user_low_ship_MULTI_CERT.tar
USERDATA_G892AUCS5CTC1_CL16888298_QB29841048_REV00_user_low_ship_MULTI_CERT.tar
Click to expand...
Click to collapse
You can backup your data with Samsung backup and restore to Samsung cloud or to your PC with Samsung's Smart Switch app.
As for tutorial I'll try to make one with images for the latest ROM G892AUCU5CTF4 dated 20-Aug-2020 with August security patch. I'll upload it later as I still have to backup my phone before updating.
Thanks!
Thank you so much!
Is it G892AUCU5CTF4 a estable versión for S8 Active? Or does it has any other bugs? I had to "downgrade" and now things are pretty cool, however, I would love to have the newest version. Thank you!
moncd6 said:
Thank you so much!
Is it G892AUCU5CTF4 a estable versión for S8 Active? Or does it has any other bugs? I had to "downgrade" and now things are pretty cool, however, I would love to have the newest version. Thank you!
Click to expand...
Click to collapse
It doesn't have any bugs but some people have issue with flashing new builds, if you have this issue just install CSI3 build or earlier
dchalkley said:
It installed successfully, everything is going well however I am unable turn on NFC. The toggle found in the settings menu is off and when I attempt to switch it on it greys out for a few seconds then the 'NFC keeps stopping' error appears on the bottom of the screen.
I've cleared the cache/data for the NFC app - no luck,
I've performed a factory reset via recovery menu - no luck.
I've installed the previous build 5CSJ3 from: https://forum.xda-developers.com/showpost.php?p=80903399&postcount=187 with a factory reset straight after - no luck.
... And to top it all off the NFC app is draining my battery.
Click to expand...
Click to collapse
Same. I also tried CTA2 and CTL1. Everything after CSI3 has NFC crashing and excessive battery drain. I've tried multiple flashes on multiple phones.
dchalkley said:
I tried again downloading the K1 and J3 builds; neither worked.
Unfortunately there's no alternative download for them... Google points to the XDA forums which seem to come from some Russian forum.
I've gone to an earlier build - 5CSI3 - https://forum.xda-developers.com/showpost.php?p=80505887&postcount=186 which works.
So it's not a NFC chip issue, yay. Now, just need to figure out what I'll do when the next update hits at the end of this month.
Click to expand...
Click to collapse
Same.
dchalkley said:
I don't know what's happening as no one else has reported this issue .
Edit: Yeah, Odin v3.13.1 . No errors being displayed, all green.
Click to expand...
Click to collapse
Same here. I used Odin 3.14.1, though.
Vcek said:
Solution:
You will lose all data so backup is recommended
Remove your SIM card, re-install the firmware with ODIN and check Nand Erase auto reboot and F. reset time
Click to expand...
Click to collapse
This did not work for me, not even with "Nand Erase" checked.
moncd6 said:
It is very odd that I am unable to have any *# codes working, and lately, I've received this odd message about NFC Service has stopped, so...
Click to expand...
Click to collapse
Same. The problem of the secret dialer codes not working parallels the NFC problem for me; that is to say that it doesn't work on any firmware after CSI3.
moncd6 said:
SOLVED!
So...I've followed the steps to install only BL, CP and CSC using G892AUCS5CSI3...however, the system started as usual, and actually did not work =(
RESOLUTION:
INSTALL THE FULL G892AUCS5CSI3. Worked as magic =)
thank you for the thread!!
Click to expand...
Click to collapse
Can you please upload G892AUCS5CSI3? it's all dead links i got
rerenz said:
Can you please upload G892AUCS5CSI3? it's all dead links i got
Click to expand...
Click to collapse
Same. I'm not sure where I originally got it from, but here's a reupload from my archives. I created a list of MD5 checksums if you care to check the five files for corruption.
voidxor said:
Same. I'm not sure where I originally got it from, but here's a reupload from my archives. I created a list of MD5 checksums if you care to check the five files for corruption.
Click to expand...
Click to collapse
Finally, it works! My NFC is back. Thanks, pal.

Categories

Resources