Related
Every time when there's another new ROM I like to test it and share my comments, but I have passed for bricks that I didn't know how to restore. With ICS you can't.
All you need to do is install the LG Drivers for our phone from LG Website and search for the KDZ Updater. When you are ready retire the battery and re-insert it. Press the Volume - (down) button while you're connecting your phone via USB. Flash your original KDZ of your country and operator. Maybe your phone now don't turn on, and for that you have to flash any KDZ with a CWM installed (of course, already rooted) and search for the stock kernel from JB (if you want it ask me for him, I''ve wrote this from my phone). Flash it via recovery with CWM doing all the wipes before flashing and you can see after you reboot your phone how it turns on again.
Reply your doubts to try to solve it.
NOTE: I will post some links when I take the PC.
Enviado desde mi LG-E610 usando Tapatalk 4 Beta
To Anyone who gets problem to unbrick your LG Optimus L3 e400
It Really works for me.
How to instal LG Firmware using KDZ Updater
1. Download and Install USB driver for Lg L3 e400 from LG website or here
2.Download and install MSXML 4.0 SP3. here.
3.Download KDZ Updater here then extract it to your computer.
4. Download KDZ file according to your country or any compatible KDZ file. Download here
How to use KDZ:
1. Detach your external SD from your phone.
2. Remove your phone battery and wait for a few seconds.
3. Put your battery back to the phone.
4. Press volume - and + (or just in the middle of volume button) and power button at the same time.
5. wait till the phone screen turns to yellow (emergency mode) then release all the buttons.
6. Connect your phone to PC by using USB cable (your LG cable).
7. Stop or disable your antivirus or antimalware.
8. Run KDZ Updater as administrator.
9. Choose the following options in KDZ Updater:
Type: 3GQCT
Phone Mode: DIAG
and browse KDZ file is the one you downloaded, browse where you put this file and then select.
9. Click on “Launch Software Update”
10. If everything goes well, you will see “Finished” on KDZ Updater screen. Your phone will restart itself. You'll see the opening screen.
If something wrong happen it's usually because of the wrong download of KDZ file, broken KDZ Updater, or your antivirus.
I hope this could unbrik your LG L3 phone.
How to Root it.
After doing all the above now you can root your device again with this. Extract the file you just downloaded to your root of your computer.
Connect your device to the computer, then double click run.bat and wait till the device restart.
Now your device is rooted again
How to get CWM
Download from Google Play Rom Manager and download your CWM with this apk while online.
Good Luck
Hi, im a l5 user but the process, im new with this device, but if i flash a rom by kdz i'll need do root,install cwm, and unlock bootloader again?
AfonsoADR said:
Hi, im a l5 user but the process, im new with this device, but if i flash a rom by kdz i'll need do root,install cwm, and unlock bootloader again?
Click to expand...
Click to collapse
Yes, You do need to root and install cwm again.
afonsoadr said:
hi, im a l5 user but the process, im new with this device, but if i flash a rom by kdz i'll need do root,install cwm, and unlock bootloader again?
Click to expand...
Click to collapse
Yes. You do need to root and reinstall cwm because it's very safe.
I have 4.0.4 ICS (cm9) on my LG L3 (e400), I tried to flash to stock since official 4.4 (kitkat) is coming soon but it does nothing, just reboots normally after flashing (no errors reported with kdz flasher) with my wallpaper and everything, and it says that my battery is charging but it's not connected to charger or computer. Any ideas?
I did everything from the guide, step by step, and I'm stuck on this error: Upgrade Error: Wparam: 100 LParam :1010
I especially looked ower firmware, and I'm positive that I downloaded the right one.
I tried several times, and every time I get this error. Also, phone now boots to Emergency mode, and can't boot to something else.
Don't know what to do? Anyone help?
Just reinstall driver, reboot pc after instalation and run kdz as admin.
Sent from my LG-E400 using XDA Premium 4 mobile app
konjkonjkonj said:
I did everything from the guide, step by step, and I'm stuck on this error: Upgrade Error: Wparam: 100 LParam :1010
I especially looked ower firmware, and I'm positive that I downloaded the right one.
I tried several times, and every time I get this error. Also, phone now boots to Emergency mode, and can't boot to something else.
Don't know what to do? Anyone help?
Click to expand...
Click to collapse
You can only enter emergency mode because you haven't finished installing_KDZ. If I were you I would try download and install another KDZ file.
It will only work when you get the right KDZ file for your device. Don't worry to try another KDZ file.
Try another KDZ updater,
Unable antivirus and firewall.
Keep on trying. I hope these will unbricked your phone.
Sent from my LG-P705 using XDA Premium 4 mobile app
mr_techno said:
I have 4.0.4 ICS (cm9) on my LG L3 (e400), I tried to flash to stock since official 4.4 (kitkat) is coming soon but it does nothing, just reboots normally after flashing (no errors reported with kdz flasher) with my wallpaper and everything, and it says that my battery is charging but it's not connected to charger or computer. Any ideas?
Click to expand...
Click to collapse
Try hard reset
Sent from my LG p705 using XDA Dev Soft.
george brown said:
Try hard reset
Sent from my LG p705 using XDA Dev Soft.
Click to expand...
Click to collapse
I can't turn it off completely without removing the battery. When I place back the battery it turns on immediately, so I don't have time to hold button combo..... :/
Download Quick Boot Reboot from play store. Run it select recovery then it should hard reset your device.
Sent from my LG p705 using XDA Dev Soft.
mr_techno said:
I can't turn it off completely without removing the battery. When I place back the battery it turns on immediately, so I don't have time to hold button combo..... :/
Click to expand...
Click to collapse
After removing battery wait about 15 seconds and put it back. If it still fails, remove battery and wait for longer time.
Just keep on trying.
Sent from my LG-P705 using Tapatalk
Delete
help me
please help me... why after i press start upgrade at kdz updater. it says phone was not found even says it Finnish and nothing happen next? either i am connected to pc and already have needed drivers? please can you help me. i installed cyanoid14 standard and my phone goes boot loop like blinking white background infinitely
Have you tried entering into CWM?
If so, then you should do factory reset, wipe cache, and go to advance then wipe dalvik cache then restart your phone.
Sent using Tapatalk
george brown said:
After removing battery wait about 15 seconds and put it back. If it still fails, remove battery and wait for longer time.
Just keep on trying.
Sent from my LG-P705 using Tapatalk
Click to expand...
Click to collapse
Tried that, tried flashing another roms, tried KDZ, tried multiple stock roms....nothing works.... It says it's charging without cable being connected.
stuck with cm9
For those you stuck and cannot flash back to stock ROM. enter to CWM, and leave it there. Connect to PC and flash with EMERGENCY mode (not DIAG)
Works perfectly, tested in Windows 8
Thanks!
Unable to download kdz
Maybe I'm doing something wrong, but when I try click on the link for the kdz I'm looking for it takes me to a tny.cz page and nothing else happens.
What am I missing?
petriedave said:
Maybe I'm doing something wrong, but when I try click on the link for the kdz I'm looking for it takes me to a tny.cz page and nothing else happens.
What am I missing?
Click to expand...
Click to collapse
Nothing wrong with the links. I''ve checked them several times.
Q&A for LG Flash Tool 2014 - The best way to Flash LG KDZ Rom
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
d950
Im having issues with doing the OTA update for my Flex d950, says my phone is not registered. I am going to be upgrading from a rooted 4.2.2 to the 20b 4.4.2
If I do the CSE flash will I lose root? Has this also been confirmed to work on windows 8.1 ? i've been reading of people having issues. Or should I just do the normal flash instead of cse?
AJUDA
Galera to com um problema na hora de restaurar a rom do G2...sempre quando vai atualizar no lg flash tools para com 11% e no celular nao sai de 1% alguem me ajuda ai pq meu G2 só fica na tela de FIRMWARE UPDATE
THANK YOU!!!!!!!!
I could really not be happier right now!!!! THank you SOOO SOOO MUCH!!! Really appreciate it!
there are no pictures, pls update pictures or write down what to choose
LG Flash Tool 2014 this application does not works offline! It need internet connection otherwise works incorrect! Look below attached picture.
Stuck In Download Mode.
Phone: LG Optimus G Pro E988, Android 4.4.2
Updated the phone about 2 months ago with the tool, today I tried to flash the same KDZ file but forgot to copy it to the LG Flash Tool folder, now my phone is stuck in download mode(I tried a number of key combinations to boot it into recovery), I thought it was the LG Support Tool problem, tried to install it, but a window pops up saying I have to connect to the internet and try again, but I was already connected, Downloaded the latest version 1.0.7.1 of the tools, now installation stuck at just about 5 %(attached a snap shot), please help my phone is stuck in download mod.
freegame619 said:
Phone: LG Optimus G Pro E988, Android 4.4.2
Updated the phone about 2 months ago with the tool, today I tried to flash the same KDZ file but forgot to copy it to the LG Flash Tool folder, now my phone is stuck in download mode(I tried a number of key combinations to boot it into recovery), I thought it was the LG Support Tool problem, tried to install it, but a window pops up saying I have to connect to the internet and try again, but I was already connected, Downloaded the latest version 1.0.7.1 of the tools, now installation stuck at just about 5 %(attached a snap shot), please help my phone is stuck in download mod.
Click to expand...
Click to collapse
Yeah... This tool works incorrect. It brick my brand new LG G2 D802 32GB when I upgrade from V20B to V20G. The phone still is brick. I think unable to unbrick without send to LG repair service. I don't recommend use this application! I recommend use completely offline older method:
install on PC LGUnitedMobileDriver_S50MAN311AP22_ML_WHQL_Ver_3.11.3, install on PC LGMobile Support Tool (B2CAppSetup), control panel>show hidden files,folders, from folder UpTestEX_BY_BRIDE_2014>Apps copy the LGMLauncher and past it into folder LGMOBILEAX (Local Disk C:>Program Data>LGMOBILEAX), from folder UpTestEX_BY_BRIDE_2014>Apps copy the LGUserCSTool.exe and past it into folder B2C_Client (Local Disk C:>Program Data>LGMOBILEAX>B2C_Client), if possible in the phone run the USB Debug, if possible in the phone choose method of connection into LG Software, connect phone into PC and wait a moment for install drivers, run as administrator application UpTestEX_BY_BRIDE_2014, select KDZ file, select type: CDMA, PhoneMode: DIAG, CSE web upgrade test, Upgrade Start, Diffrent Country, Language
This method is a 100% offline-not need internet connection.
Good luck!
LG G2 stuck in Boot Loop after flashing firmware
Hi Guys i have a LG G2 which had been rooted and was running CM11 CyanogenMod Android KitKat 4.4.2.
I wanted to go back to stock, so flashed the phone using the LG flash tool 2014 which worked fine till it rebooted to the LG logo and rebooted again and again till battery went flat.
I can enter download mode by holding vol+ and plugging in the usb but can't do anything please could someone advise.
Thanks
For all of you with D802 model who bricked your device using this tool (like I did) use this one (link under) step by step and everything will be fine. This ia .tot method and you'll be 4.2.2 again.You just have to be able to enter download mode to save your phone with this method. It saved mine. Good luck
http://forum.xda-developers.com/showthread.php?t=2687929
wow
Am I supposed to not change language?
I'm stuck on phone screen (download mode) at 13%
Hi,
i used towelroot and used a programm to change my locale setting. I set it to German language and Antarctica location by mistake instead of German and Austria, and that terminated the Android UI over and over again. The phone instantly went into a loop restarting its UI. A reboot did not work, stuck on LG logo. I can enter download mode, but not factory reset.
Used your modded tool. It goes to 99% and then end with "abnormal program termination". It looks like the flashing worked, but the language setting is the same i guess because the phone is still stuck at the LG logo. I am using the normal flash, not CSE flash cause i want to rescue my data.
I leave the default setting cdma and diag. I tried Germany, different country and germany, republic of korea, and even korean, republic of korea in the window before the update starts.
Is there a way to force the Antarctica locale setting to go away without deleting all my data?
Got LG G2 32 gig, unlocked
I am on Sling 2.2.2 on F180L.
I want to go to stock..
Should I have to relock boot loader 1st or KDZ flash will automatically lock BL?
Stock KDZ file is 1.2GB. I assume this Tool won give any error?
Sent from My LG Optimus G F180L Sling 2.2.2 stock 4.4.2 rooted
Hi ppl!
Need some help, in lg flash tool only appers the normal way for flash! Never appers the option to wipe the phone complete.
I'm using win 8.1 64x and already install the additional software that OP indicate.
Any tip to resolve this?
Thanks in advance
Send from D802 32gb OptimusG3 v1.4.1+Dominax Kernel v8.7
LG G2 stuck
I was installing a new kernel using clockwork Rom Manager to reboot the phone in TWRP recovery, didn't know this was bad. So I had my G2 completely stuck on LG logo, no download mode, no recovery, can't even turn it off, then I tried LG mobile support tool, restored after many times a Rom, but when it boot it asks me some kind of PIN/Password, then I did the same using LG Flash tool by goind in download mode, but still the same, what can i possibly do? Thanks in advance
If you have download mode,look at my post #10. There is a link to solve your problem. It definetly solved mine and I only had download mode. Just follow steps 1by1. Don't know which version you have,mine is D802. I think it helps for D800/1/2/3
has anyone used this tool on LG-F370S, South Korea?
help please
i have LG G2 D802 32gb ... heres the details...
i tried to flash twrp recovery which lead me to fastboot with no recovery no download mode no adb connection just fastboot...
after two days of reading threads after threads i flashed "pgpt32g.img" "rpm.img" "sbl1.img" "sgpt32g.img" and "tz.img" with fastboot.. after that i finally saw my device booted normally.. but dont know why the touch went crazy... like theres something wrong with the screen... i thought i messed it up or its some software issue... so i downloaded D80220F_00.kdz and flashed it on my phone... once again i am stuck.. now on LG logo... after that i downloaded ""Europe OPEN D80220B_00"" "TMO-EE 32GB D80210B_00" and "UK Open 16GB D80210B_00" and flashed them one by one ... i am still at my LG logo phone doesnt go further....
now... i found these websites here on xda
http://lg-firmware-rom.com/
http://csmg.lgmobile.com:9002/csmg/b...heck2.jsp?esn=
i searched the firmware with entering my imei and both sites are giving me same kdz now... i flashed this file too... nothing happened all i see is LG logo and led changing colors....ALSO TRIED HARD RESETTING THE PHONE STILL NO HOPE...
hope you guys reply soon
thanks..
Empty "Language" list
Hi,
I have LG F70 D315.
I got an issue when choosing language from the "Language" list (see fig. attached).
Please give me a prompt on how to fix this issue.
ive been trying to flash a kdz using lg flash tool this afternoon but am now stuck in download mode. Every time i try to flash the kdz it gets to a random percentage complete on my phone, a message comes up on the phone saying ASSERT in beg red letters, and then the phone reboots into download mode.
this happens every time.
anyone able to help?
welly_59 said:
ive been trying to flash a kdz using lg flash tool this afternoon but am now stuck in download mode. Every time i try to flash the kdz it gets to a random percentage complete on my phone, a message comes up on the phone saying ASSERT in beg red letters, and then the phone reboots into download mode.
this happens every time.
anyone able to help?
Click to expand...
Click to collapse
I had the same problem while trying to update to lollipop official unrooted using LG PC Suite. Then tried LGMobile Support Tool several times to flash the rom and everytime it was stopping in a random percentage also. After several times it managed to go to 100% but installed the kitkat version instead as i gave up with the lollipop rom, but i am gonna give it a try today (maybe a lot if tries!). Would be nice if someone can tell as what is happening and using pc suite and official rom on unrooted phone gives as this error.
Help please this is what happened I am new to this !! So I have a lg g2 d8003 in Canada it was on 4.4.2 Kk I rooted the phone auto rec v2 twrp recovery installed and flashed the cloudy 3.3 rom.
I was having service issues on cloudy so i wanted to flash back my restore I made with twrp, before I flashed my restore I flashed ( KK_d8003_bootloader.zip) ?? and then flashed my restore
Now me phone just restarts to the Lg logo And says in white (890 source booting error) (940 cause boot certification verify)
Then the screen turns black (The phone is still on)
Next I try to boot into recovery and that does not work it boots into Factory Reset
(If I go though the steps it does not bring me to twrp power bottom three times)
Next I try to boot into download mode and I can boot into download mode THE PHONE SAYS firmware update and and the bottom it says USER B26 and in red it says ROOTED
But on my PC Windows XP Device Manager it says LGE AndroidNet USB Serial Port (COM4)
In with ! In yellow
The phone does not read with Lg flash tool it just crashes the program
LgMonile Support Tool reads my phone it seems and tells me the County Setting: United States, Software Version: D803R20F
Your device has the latest software available from LG Mobile Support Tool
It will not let me install any USB Drivers My phone is not listed under the USB INSTALL
(BEFORE THIS BRICK HAPPENED I HAD FULL USE OFF MY PHONE VIA USB ON MY WINDOWS XP PC
I AM STUCK I DONT NO WHAT TO DO NOW IF SOMEONE CAN PLEASE TAKE THE TIME TO HELP ME
Thank you all very much
Are you using the kdz or tot? If one fails use the other and see if it works. For the Tot method go by on device manager and change the port from 4 to 41 otherwise it will not detect your device
Sent from my LG-D800 using Tapatalk
xmayhemreturnsx said:
Are you using the kdz or tot? If one fails use the other and see if it works. For the Tot method go by on device manager and change the port from 4 to 41 otherwise it will not detect your device
Sent from my LG-D800 using Tapatalk
Click to expand...
Click to collapse
Hello I was using KDZ I don't no how to use the toto can you send me a link on how to I am very new and I am lost in this at the moment
iclone said:
Hello I was using KDZ I don't no how to use the toto can you send me a link on how to I am very new and I am lost in this at the moment
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=45293512
Sent from my LG-D800 using Tapatalk