Related
Note: I may not use terms correctly, I have spent the past hour reading threads similar to mine in order to (hopefully) use the correct terms to describe my predicament.
I was using TriForce ROM 3.0 and I wanted to mix things up a bit because it was too much like the stock ROM. I found Negalite S4 and tried my hand at that, with devastating consequences. I booted my phone into TWRP did a wipe and then proceeded to install the Negalite S4.zip onto my phone. It got stuck in a boot loop. After a good 30~ minutes of it continuously rebooting I turned it off and booted back into TWRP. However, now that my phone was wiped, it is not a recognized device by my computer any longer. Since I wiped the phone clean the .zip is no longer on my phone either. So, all I have now is a phone that can boot into recovery (TWRP); which is a soft-brick (correct me if I'm wrong).
I have read other threads and the xda community informs the user to use KIES or ODIN (I have used ODIN once before). However, try as hard as I can to understand their directions... I don't know what to do with ODIN.
My computer does not recognize my device at all. It will only boot into recovery otherwise it's stuck in an infinite boot loop. I am really scared that I have ruined such a valuable phone and so I am not thinking clearly - which is only adding to my "noobishness."
Can anyone please help me out in a way that I can understand? All help is much appreciated!
_retro said:
Note: I may not use terms correctly, I have spent the past hour reading threads similar to mine in order to (hopefully) use the correct terms to describe my predicament.
I was using TriForce ROM 3.0 and I wanted to mix things up a bit because it was too much like the stock ROM. I found Negalite S4 and tried my hand at that, with devastating consequences. I booted my phone into TWRP did a wipe and then proceeded to install the Negalite S4.zip onto my phone. It got stuck in a boot loop. After a good 30~ minutes of it continuously rebooting I turned it off and booted back into TWRP. However, now that my phone was wiped, it is not a recognized device by my computer any longer. Since I wiped the phone clean the .zip is no longer on my phone either. So, all I have now is a phone that can boot into recovery (TWRP); which is a soft-brick (correct me if I'm wrong).
I have read other threads and the xda community informs the user to use KIES or ODIN (I have used ODIN once before). However, try as hard as I can to understand their directions... I don't know what to do with ODIN.
My computer does not recognize my device at all. It will only boot into recovery otherwise it's stuck in an infinite boot loop. I am really scared that I have ruined such a valuable phone and so I am not thinking clearly - which is only adding to my "noobishness."
Can anyone please help me out in a way that I can understand? All help is much appreciated!
Click to expand...
Click to collapse
Okay, download and install Samsung drivers from the Internet if your phone isn't installing them on its own. Download MDL stock. Open ODIN. Put your phone in download mode. ODIN should see your phone. Flash stock MDL. Use goo manager to install TWRP again after your booted on stock MDL. Or use ODIN to do it. Redownload the custom ROM you want and then flash in TWRP. Also wiping the phones dalvik, cache system ect shouldn't have erased your SD card in the first place. You mist have accidentally checked the wipe SD card in advanced wipe options. You never need to do that. So next time also have a nandroid backup on your external SD. I keep one on internal as well in case external card goes bad cause sometimes that happens. And never select that wipe SD card option. Unless of course you really do want to wipe your SD card. Don't do that and keep a full backup of your last working ROM and you'll not have this problem again.
3ncrypt3d said:
Okay, download and install Samsung drivers from the Internet if your phone isn't installing them on its own. Download MDL stock. Open ODIN. Put your phone in download mode. ODIN should see your phone. Flash stock MDL. Use goo manager to install TWRP again after your booted on stock MDL. Or use ODIN to do it. Redownload the custom ROM you want and then flash in TWRP. Also wiping the phones dalvik, cache system ect shouldn't have erased your SD card in the first place. You mist have accidentally checked the wipe SD card in advanced wipe options. You never need to do that. So next time also have a nandroid backup on your external SD. I keep one on internal as well in case external card goes bad cause sometimes that happens. And never select that wipe SD card option. Unless of course you really do want to wipe your SD card. Don't do that and keep a full backup of your last working ROM and you'll not have this problem again.
Click to expand...
Click to collapse
Thank-you for the detailed response, I'll get started now! I did wipe the SD card, you're right. I'm so glad that you posted, thanks again.
If I need help I'll edit this post (no bumping within 24 hours). I'm hoping I have enough smarts to knock this out though. Again, thank you so much.
EDIT: Excuse my ignorance. I'm not sure what MDL stock is, I figured it was the default ROM - I have a nandroid of that. However, even after re-installing the samsung drivers, rebooting both my phone and computer - nothing happens. I don't know how to proceed from here. I can imagine I'm becoming a pain and do apologize.
_retro said:
Thank-you for the detailed response, I'll get started now! I did wipe the SD card, you're right. I'm so glad that you posted, thanks again.
If I need help I'll edit this post (no bumping within 24 hours). I'm hoping I have enough smarts to knock this out though. Again, thank you so much.
EDIT: Excuse my ignorance. I'm not sure what MDL stock is, I figured it was the default ROM - I have a nandroid of that. However, even after re-installing the samsung drivers, rebooting both my phone and computer - nothing happens. I don't know how to proceed from here. I can imagine I'm becoming a pain and do apologize.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2375523
The link above is the tar file for stock MF9. If you just use the link for the from the first post you just need to download the first file (not the kernel). Once downloaded you need to extraxt that zip and you will get a .tar.md5 file from it. Later open odin and make sure only auto reboot is checked. Click on the PDA slot and find the .tar.md5 file you downloaded click on it. Next put your phone into download mode and connect it to your computer. Wait for it to install drivers and you will see a yellow box with "com:[some number]" once you see that click start and from there let it do its thing and whoola you have your phone back to MF9 stock. Good luck!
Sent from my SPH-L720
ROMANTiC KiD said:
http://forum.xda-developers.com/showthread.php?t=2375523
The link above is the tar file for stock MF9. If you just use the link for the from the first post you just need to download the first file (not the kernel). Once downloaded you need to extraxt that zip and you will get a .tar.md5 file from it. Later open odin and make sure only auto reboot is checked. Click on the PDA slot and find the .tar.md5 file you downloaded click on it. Next put your phone into download mode and connect it to your computer. Wait for it to install drivers and you will see a yellow box with "com:[some number]" once you see that click start and from there let it do its thing and whoola you have your phone back to MF9 stock. Good luck!
Sent from my SPH-L720
Click to expand...
Click to collapse
Well, you did it! That post is solid, I understood every-bit! My phone (most likely) is downloading the firmware now. I don't know how long it will take to get off the "Downloading... Do not turn off target !!" screen, but I'll edit this post after letting it sit over night! Thank you both so much.
_retro said:
Well, you did it! That post is solid, I understood every-bit! My phone (most likely) is downloading the firmware now. I don't know how long it will take to get off the "Downloading... Do not turn off target !!" screen, but I'll edit this post after letting it sit over night! Thank you both so much.
Click to expand...
Click to collapse
Your welcome glad to help again, should take less than 10 mins. If its more than that just reboot your computer and repeat the steps from opening odin and finding your file. Another GS4 saved ;D
Sent from my SPH-L720
ROMANTiC KiD said:
Your welcome glad to help again, should take less than 10 mins. If its more than that just reboot your computer and repeat the steps from opening odin and finding your file. Another GS4 saved ;D
Sent from my SPH-L720
Click to expand...
Click to collapse
You were right, it was quite snappy. I cannot believe I was so panicked over this! My babies safe ... for now.
So how did Twrp wipe nor SD card? When by boot into recovery and immediately click on Wipe, it'll wipe everything Necessary except the internal and external memory. Did you click the option to choose what you want to wipe? Happens more than ya may think, cause I've done it myself lol. Good to hear it's back up, I still get freaked out by those occurrences
Sent from my SPH-L720 using Tapatalk 2
reverepats said:
So how did Twrp wipe nor SD card? When by boot into recovery and immediately click on Wipe, it'll wipe everything Necessary except the internal and external memory. Did you click the option to choose what you want to wipe? Happens more than ya may think, cause I've done it myself lol. Good to hear it's back up, I still get freaked out by those occurrences
Sent from my SPH-L720 using Tapatalk 2
Click to expand...
Click to collapse
It wasn't human error through TWRP, it was an error while flashing Negalite. It asks if you want to wipe everything, data, or nothing at all. Silly me thought let's wipe EVERYTHING! Heheh
3ncrypt3d said:
Okay, download and install Samsung drivers from the Internet if your phone isn't installing them on its own. Download MDL stock. Open ODIN. Put your phone in download mode. ODIN should see your phone. Flash stock MDL. Use goo manager to install TWRP again after your booted on stock MDL. Or use ODIN to do it. Redownload the custom ROM you want and then flash in TWRP. Also wiping the phones dalvik, cache system ect shouldn't have erased your SD card in the first place. You mist have accidentally checked the wipe SD card in advanced wipe options. You never need to do that. So next time also have a nandroid backup on your external SD. I keep one on internal as well in case external card goes bad cause sometimes that happens. And never select that wipe SD card option. Unless of course you really do want to wipe your SD card. Don't do that and keep a full backup of your last working ROM and you'll not have this problem again.
Click to expand...
Click to collapse
ODIN IS NOT RECOGNISING MY PHONE ...WHAT TO DO????:crying::crying::crying:
Ridddeathmetal said:
ODIN IS NOT RECOGNISING MY PHONE ...WHAT TO DO????:crying::crying::crying:
Click to expand...
Click to collapse
Reinstall drivers, use different USB ports, used different USB cables?
Sent from my SPH-L720 using xda app-developers app
romantic kid said:
reinstall drivers, use different usb ports, used different usb cables?
Sent from my sph-l720 using xda app-developers app
Click to expand...
Click to collapse
tried 4 ports...in different pc also but same result used 3 cables...but none recognising it.....drivers have been downloaded and reinstalled
Hey guys,
I have an S4 that is stuck on the Samsung logo. I have left it for over an hour at a stretch with nothing happening except the phone is smoking hot.
I have booted into Recovery (stock) and wiped the cache and rebooted with the same result.
I am completely stock and unrooted ... any ideas?
I would try a factory reset in recovery
jd1639 said:
I would try a factory reset in recovery
Click to expand...
Click to collapse
I assume I would lose all data and programs and have to re-set up the phone?
llcooljayce said:
I assume I would lose all data and programs and have to re-set up the phone?
Click to expand...
Click to collapse
Yep, but you phone should with again
llcooljayce said:
I assume I would lose all data and programs and have to re-set up the phone?
Click to expand...
Click to collapse
Have you tried wiping Dalvik cache in recovery as well?
MrKhozam said:
Have you tried wiping Dalvik cache in recovery as well?
Click to expand...
Click to collapse
He's on stock recovery
jd1639 said:
He's on stock recovery
Click to expand...
Click to collapse
Ah, my mistake. Yes, so only option left is wipe data/factory reset.
llcooljayce said:
Hey guys,
I have an S4 that is stuck on the Samsung logo. I have left it for over an hour at a stretch with nothing hapfixes. g except the phone is smoking hot.
I have booted into Recovery (stock) and wiped the cache and rebooted with the same result.
I am completely stock and unrooted ... any ideas?
Click to expand...
Click to collapse
See the Samsung guy at any Best Buy. He has the Samsung Tool and will reflash it for free. You will be back to MK2. Easier than fiddling with various fixes. This happened to my wife's Sgh-i747. Init.d prop build error. Recovery flashing updates didn't work. Odin didn't work. Kies same.
llcooljayce said:
Hey guys,
I have an S4 that is stuck on the Samsung logo. I have left it for over an hour at a stretch with nothing happening except the phone is smoking hot.
I have booted into Recovery (stock) and wiped the cache and rebooted with the same result.
I am completely stock and unrooted ... any ideas?
Click to expand...
Click to collapse
Just re-flash the stock firmware from odin. Use the pda button, check auto-restart and f reset flags only. Use PDA button to browse to the downloaded IMG file. You can get your stock firmware from Samsung-updates.com . just make sure you get the i337m or the i337 (whichever you have, as they are not the same) for your region.
MrKhozam said:
Ah, my mistake. Yes, so only option left is wipe data/factory reset.
Click to expand...
Click to collapse
Did a factory wipe and reboot and I am back in business. Crappy that it happened that way but happy that I was able to recover
Back to the same problem!
I lost my LTE connection and reset my phone ... now I'm stuck back on the Samsung logo.
I assume I have a faulty phone ... any idea what could have happened?
llcooljayce said:
Back to the same problem!
I lost my LTE connection and reset my phone ... now I'm stuck back on the Samsung logo.
I assume I have a faulty phone ... any idea what could have happened?
Click to expand...
Click to collapse
So you say LTE dropped and you did another factory reset? If your APN settings are correct, then this shouldn't be happening unless there's a data block set on your account with your carrier. In this case, I would say something is wrong with the modem on your phone.
MrKhozam said:
So you say LTE dropped and you did another factory reset? If your APN settings are correct, then this shouldn't be happening unless there's a data block set on your account with your carrier. In this case, I would say something is wrong with the modem on your phone.
Click to expand...
Click to collapse
Figured out that it was the microSD card that was causing the issue. I used the program App2SD to move programs from my main memory to run them on the SD card. Somehow the files that were moved over corrupted the boot sequence somehow. Total chance that I removed the card to send out for warranty repair and tried to boot it one last time.
So here we go again...
I tried using Odin to get back to stock but, Odin just kept crashing
every time I tried loading the 'MD5' file. I tried multiple versions as well..
Then I realized even though the computer would say Odin was
'Not Responding' I continued to wait, and finally it loaded the MD5!
So I went ahead and tried going back to stock, but when I did
every stock MD5 file causes my device to close
Google Play, Google Location, and SystemUI rapidly...
I was able to get my original Recovery in there and restore a backup,
but I'd really like to try and go back to stock for a bit and start fresh.
What the heck in the world is going on with my phone?!
I thought Odin was my safety net, here to help me, but
instead I'm getting more and more hassle trying to get it workin'...
Any help at all would be greatly appreciated!!!
Just tried flashing MK6 using Odin
(MK6 came on my phone originally)
and I get the same issue..
Everything I try ends up failing..
Egads!
Adizzzle said:
So here we go again...
I tried using Odin to get back to stock but, Odin just kept crashing
every time I tried loading the 'MD5' file. I tried multiple versions as well..
Then I realized even though the computer would say Odin was
'Not Responding' I continued to wait, and finally it loaded the MD5!
So I went ahead and tried going back to stock, but when I did
every stock MD5 file causes my device to close
Google Play, Google Location, and SystemUI rapidly...
I was able to get my original Recovery in there and restore a backup,
but I'd really like to try and go back to stock for a bit and start fresh.
What the heck in the world is going on with my phone?!
I thought Odin was my safety net, here to help me, but
instead I'm getting more and more hassle trying to get it workin'...
Any help at all would be greatly appreciated!!!
Click to expand...
Click to collapse
What firmware are you on? What version of Odin are you using? Perhaps try using a different version. Also use original usb cable not universal one. Seems to make a difference.
Adizzzle said:
So here we go again...
I tried using Odin to get back to stock but, Odin just kept crashing
every time I tried loading the 'MD5' file. I tried multiple versions as well..
Then I realized even though the computer would say Odin was
'Not Responding' I continued to wait, and finally it loaded the MD5!
So I went ahead and tried going back to stock, but when I did
every stock MD5 file causes my device to close
Google Play, Google Location, and SystemUI rapidly...
I was able to get my original Recovery in there and restore a backup,
but I'd really like to try and go back to stock for a bit and start fresh.
What the heck in the world is going on with my phone?!
I thought Odin was my safety net, here to help me, but
instead I'm getting more and more hassle trying to get it workin'...
Any help at all would be greatly appreciated!!!
Click to expand...
Click to collapse
So the flash was successful but when booting up u get FC's correct? If that is the case then I would guess it's because u didn't wipe data/factory reset preflash. Doing this from recovery should solve ur problem if I understood u right
John The Rhino said:
What firmware are you on? What version of Odin are you using? Perhaps try using a different version. Also use original usb cable not universal one. Seems to make a difference.
Click to expand...
Click to collapse
Im on MK6 originally, on Pac ROM
While I figure all this out…
I have used every 'newer' version
of Odin available and am using the
Original cable..
blankingblank said:
So the flash was successful but when booting up u get FC's correct? If that is the case then I would guess it's because u didn't wipe data/factory reset preflash. Doing this from recovery should solve ur problem if I understood u right
Click to expand...
Click to collapse
So Odin doesn't wipe / factory reset
on its own?
The first time I forgot to wipe but
every other time Im sure I wiped in
recovery before hitting up download
mode.
I did make a ROM using NC1
firmware and added KT kernel to
it. The ROM was a dud and that's
why I wanted a fresh start.
Adizzzle said:
Im on MK6 originally, on Pac ROM
While I figure all this out…
I have used every 'newer' version
of Odin available and am using the
Original cable..
So Odin doesn't wipe / factory reset
on its own?
The first time I forgot to wipe but
every other time Im sure I wiped in
recovery before hitting up download
mode.
I did make a ROM using NC1
firmware and added KT kernel to
it. The ROM was a dud and that's
why I wanted a fresh start.
Click to expand...
Click to collapse
The way I understand it there are 2 types of Odin flashable fws: full wipe and no full wipe. Full wipe fws are the ones that come in separate parts, i.e. BL, AP, CP etc. and no full wipe fws are the complete tar.md5 files. I recently went back to stock to get a fresh start as well and had the same issue with FC's on boot up. Factory reset fixed it
blankingblank said:
The way I understand it there are 2 types of Odin flashable fws: full wipe and no full wipe. Full wipe fws are the ones that come in separate parts, i.e. BL, AP, CP etc. and no full wipe fws are the complete tar.md5 files. I recently went back to stock to get a fresh start as well and had the same issue with FC's on boot up. Factory reset fixed it
Click to expand...
Click to collapse
So I was using an .md5 file, therefore Odin
wasn't able to fully wipe my S4?
I could have sworn I tried wiping..
Will give it another go though! :highfive:
Adizzzle said:
So I was using an .md5 file, therefore Odin
wasn't able to fully wipe my S4?
I could have sworn I tried wiping..
Will give it another go though! :highfive:
Click to expand...
Click to collapse
They're all .md5's. One comes in 4 parts and the other all bundled in one. The latter, as has been my experience, does not wipe data
blankingblank said:
They're all .md5's. One comes in 4 parts and the other all bundled in one. The latter, as has been my experience, does not wipe data
Click to expand...
Click to collapse
I hate to sound dumb here but where
would I find individual parts to do a full
restore of my phone?
Adizzzle said:
I hate to sound dumb here but where
would I find individual parts to do a full
restore of my phone?
Click to expand...
Click to collapse
The single all in one tar will restore all parts of your phone.
Sent from my Nexus 5
jd1639 said:
The single all in one tar will restore all parts of your phone.
Sent from my Nexus 5
Click to expand...
Click to collapse
Well it sure didn't work last time I tried..
I can get the phone to boot but Wifi remains
locked in the off position and my baseband
remains at MK6 when I was trying to flash
the 4.4.2 NC1 build..
Could this be due to the KT kernel I
flashed before trying to restore?
I flashed the Kernel before all this
happened, then realized the kernel
dropped my wifi, so that's why I tried
restoring to stock, but the wifi still
drops on me after odin'ing back to
stock…
jd1639 said:
The single all in one tar will restore all parts of your phone.
Sent from my Nexus 5
Click to expand...
Click to collapse
Ya that's what I used too. I just formatted all the individual partitions first using philz to be sure I got a clean start. Also, if u wanna try it, the leaked NC1 firmware that dropped right before the official OTA's came out, I think that was a 'full restore' fw as it came in 4 sections.
---------- Post added at 03:15 PM ---------- Previous post was at 03:10 PM ----------
Adizzzle said:
Well it sure didn't work last time I tried..
I can get the phone to boot but Wifi remains
locked in the off position and my baseband
remains at MK6 when I was trying to flash
the 4.4.2 NC1 build..
Could this be due to the KT kernel I
flashed before trying to restore?
I flashed the Kernel before all this
happened, then realized the kernel
dropped my wifi, so that's why I tried
restoring to stock, but the wifi still
drops on me after odin'ing back to
stock…
Click to expand...
Click to collapse
There is a boot.img inside the stock fw if I'm not mistaken, and that should overwrite anything you've done to /boot (where the kernel lives).
So if I understand this correctly I have a couple of options one of them being I do the full firmware update using the 4 files provided from the leak. Or somehow install the boot.img and that should fix the wifi drop issues?
G900F
odin3 v1.85
Firmware "three" from this link http://storagecow.eu/index.php?dir=Xda/Galaxy+S5/United+Kingdom/
After doing the above i have lost recovery and can only boot to download mode. I have tried kies but its not picking up the phone. I have also tried the "o2" firmware still same issue
What can i do to fix this? I might of messed up the partitions and i dont have a backup.
Thank you
juDGEY2k10 said:
G900F
odin3 v1.85
Firmware "three" from this link http://storagecow.eu/index.php?dir=Xda/Galaxy+S5/United+Kingdom/
After doing the above i have lost recovery and can only boot to download mode. I have tried kies but its not picking up the phone. I have also tried the "o2" firmware still same issue
What can i do to fix this? I might of messed up the partitions and i dont have a backup.
Thank you
Click to expand...
Click to collapse
Try flashing this G900F pit file https://www.dropbox.com/s/rt314eo7nu4li9c/SM-G900F_pit_16GB(1).zip from here http://forum.xda-developers.com/showthread.php?t=2737448 along with the firmware again.
Uncheck Auto Reboot in odin, after the flash pull the battery, wait 20 seconds, go into recovery and data factory reset and reboot.
gee2012 said:
Try flashing this G900F pit file https://www.dropbox.com/s/rt314eo7nu4li9c/SM-G900F_pit_16GB(1).zip from here http://forum.xda-developers.com/showthread.php?t=2737448 along with the firmware again.
Uncheck Auto Reboot in odin, after the flash pull the battery, wait 20 seconds, go into recovery and data factory reset and reboot.
Click to expand...
Click to collapse
Hey cheers for getting back to me, i did the above but its still doing the same thing.
juDGEY2k10 said:
Hey cheers for getting back to me, i did the above but its still doing the same thing.
Click to expand...
Click to collapse
1. Use Odin 3.09 instead of 1.85
2. Check Repartition if you use a PIT file
3. Check F. Reset Time
Hey mate, ok i worked out what was wrong, the pid file SM-G900F_pit_16GB_SER.zip worked but the SM-G900F_pit_16GB.zip did not work for me.
Thanks so much for the input
juDGEY2k10 said:
Hey mate, ok i worked out what was wrong, the pid file SM-G900F_pit_16GB_SER.zip worked but the SM-G900F_pit_16GB.zip did not work for me.
Thanks so much for the input
Click to expand...
Click to collapse
Happy for you its solved
gee2012 said:
Try flashing this G900F pit file https://www.dropbox.com/s/rt314eo7nu4li9c/SM-G900F_pit_16GB(1).zip from here http://forum.xda-developers.com/showthread.php?t=2737448 along with the firmware again.
Uncheck Auto Reboot in odin, after the flash pull the battery, wait 20 seconds, go into recovery and data factory reset and reboot.
Click to expand...
Click to collapse
it worked thnx
I'm not sure this is a fix for what I have happening.
Last week my phone was completely dead for 3 days (I was camping and could not do much, other than charge it up).
When it decided to come back to life, it would not boot all the way, and stick on the Samsung screen, or boot and run for a while then just turn off.
I reloaded the Recovery (Phil's) thinking that need to be reflashed, but there are still problems.
I used recovery to try to wipe cache, but it seems cache, dalvic cache and some other partitions are size 0MB (I left the phone at home, since it is not working, so I cannot remember which partitions are size 0MB).
So, in searching for a solution, this sounds like what I need (at least for the first step). Will this correct my partitions? Or, do I need to resize them using recovery?
Or, something else entirely? Any help on which direction to go would be appreciated!
Hi Guys,
My brother he updated his phone to the new stock update android 5.0 now his device is just reboots everytime he puts the pin to unlock his device.
What's the option for him? He has already cleared the cache.
Just wondering if he flash a recovery vida odin and then install another stock rom will it wipe the phone data?
He got some important notes and messages he's worried about. Any ideas.
Thanks
hero000 said:
Hi Guys,
My brother he updated his phone to the new stock update android 5.0 now his device is just reboots everytime he puts the pin to unlock his device.
What's the option for him? He has already cleared the cache.
Just wondering if he flash a recovery vida odin and then install another stock rom will it wipe the phone data?
He got some important notes and messages he's worried about. Any ideas.
Thanks
Click to expand...
Click to collapse
Everytime you flash your phone will wipe your data thats not on your sd card. Have you tried connecting to a computer via usb before entering the pin and leaving it on the lock screen? If you can view the device and pull your files on your computer you should be able to recover your data before reflashing.
What kind of phone and carrier do you have? Lollipop is not available on some s4's certain carriers.
Flashing stock roms through Odin doesn't reset the device.
dave106 said:
Flashing stock roms through Odin doesn't reset the device.
Click to expand...
Click to collapse
+1 I had to do this to get mine working and didn't lose anything.
AndroidInitiate said:
Everytime you flash your phone will wipe your data thats not on your sd card. Have you tried connecting to a computer via usb before entering the pin and leaving it on the lock screen? If you can view the device and pull your files on your computer you should be able to recover your data before reflashing.
What kind of phone and carrier do you have? Lollipop is not available on some s4's certain carriers.
Click to expand...
Click to collapse
Incorrect.
Flashing a recovery NEVER wipes your phone. Flashing a stock rom NEVER wipes your phone unless you select re-partition. Flashing anything else trough Odin will NEVER wipe your phone unless you check re-partition.
Question to the op:
What notes/files are you talking about? Are they stored on the internal storage? Did you try to reflash the firmware (or any newer Lollipop version) trough Odin (without re-partion and .pit)?