Got a LG G2 D802 - or so I think I did, bought from aliexpress.
opened the phone and I saw a missing soldered connector on the top of the phone.
What communication does this connection connect to? didn't find any layout of the antenna online.
please advise.
Also can't get the radio to work and the "knock On" feature (off = works, on = doesn't work)
Thanks in advance!
Hi, look there:https://www.ifixit.com/Teardown/LG+G2+Teardown/20485
You should have two pin that connect an antenna.
So your radio problem should come from there.
About the knock on, it's another issue, try to flash back to stock.
Thanks for the reply,
I know there should be 2 of them, but for what communication device does it belong to?
(I've checked them all and they work - WIFI/BT/IR/GPS...)
The radio - the "antenna" is the headphone-set itself that should be connected, I don't think that it has to do with it as far as I know (I could be wrong)
It is the stock rom as I just received it, all the LG functions are there.
Related
Hi
I wondered if anyone had successfully used the Sim Access Profile capabilkity of the of TyTn to connect with a Bluetooth car kit. I'm trying to get the connection going with a Merc. car kit, but I can't get them to pair.
Thx
Hi petes, I have an slk 55 amg with command and bluetooth. The bluetooth in the command system does not work for pairing with a phone. Even though it says it has bluetooth. To use bluetooth you need an extra module.
Hope this helps...
http://www.benzworld.org/forums/r17...y-arrived-but.html?highlight=bluetooth+module
http://www.wireless4mb.com/phones.html
http://www.benzworld.org/forums/r17...pic-seems-kit.html?highlight=bluetooth+module
Hi Dale
Thanks. I actually already have the module - the european version of the module is different to the US one in that it uses Sim Access Profile, rather than just acting as a headset. The TyTn says is supports SAP, but I just can't make it work - wondering if anyone's actually got SAP working.
pete S
Hi Petes,
I also have an Mercedes-Benz with the european bluetooth module. But I have a Qtek 9100 updated to AKU2 (Which is supposed to support SAP), but no luck at all. Actually the module can not even identify my phone and display it at the search screen of the comand screen. I tried also with a NOKIA 6230i (SAP Compatible phone) which actually I was able to see at the search list of the comand screen which means that the module is working with SAP compatible phones. What I will do next, is to try again with the new firmware I installed to my 9100 (T-Mobiles 2.21 Version) which has a SAP application for bluetooth (Something like SAP Server).
I can not do it yet because I am abroad and I will be back again 1st of September. I will let you know the results ASAP.
If you have any news from your site with TyTn please let me know because I was intending to change my 9100 to TyTn just for the SAP functionality.
Hi Barsam
The reason you can't find the 9100 when you search with the BT module is that it only looks for devices which identify themselves as Phones. The TyTn (and no doubt the 9100) identify themselves as Pocket PCs and so the (stupid!) Mercedes kit ignores them. The good news is that you can hack the registry to tell the Bluetooth stack that it's a phone. The bad news is that you can't pair with it. Getting it into the search screen doesn't mean it supports SAP - I could see my old T68 just when I was testing. Could you actually pair with the 6230i - i.e. when you see it in the list select Call?
When you're back, PM me and I'll send you the hack.
To tell you the truth I didn't try to pair the 6230i, but it's one of the phones that mercedes have tested on the bluetooth module. If I don't manage to do it with the 9100 I may get a 6230i. At least I can use the one that my brother has to test it and even copy my contacts to comand. Have you tried the hack with the TyTn? Can you tell me what is the the registry set to do that?
Where did you find out that the bluetooth module ignores enything elese than phones?
Make the following registry change
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\SYS]
"COD"=dword:52020C
On your own head etc.. Keep a copy of the current value of course. Then do a soft reset. You'll then see it as a phone. I've tried this, and can now see the phone, but can't pair. I've had a mail back from HTC that they're aware of some problem with the SAP and are working on it.
I wish a nice car kit would be released in the USA that supports SAP/850 & 1900/ external aerial...
hello,
i'm trying to get my TyTN working with my Meceder Command too... does anyone tried the English ROM-Update? Someone wrote that he can use it's TyTN with his Audi after updating the ROM. And tha Audi-MMI-System works also with SAP... perhpas after the ROM-Update it works with Mecedes Command System too...
I haven't tried it yet - I've been waiting for the TyTn update to come along, but nothing from HTC yet. If I don't get anything soon, I'll switch over to the iMate ROM and report back.
I have used a nokia 6233 6280 onmy E55 2005 with B/t Module
The mercedes module in conjuntion with the command system is problimatic, hoever I think I have another peice of the puzzle. With both the above phones they only worked using Vodaphone 3g cards Three 3g cards paired using SAP however could not get recieption....Mercedes say (there guessing) its the way the sim card is configured.....
Mercedes BT
I have a TYTN on order and Im desperate to find a solution to the issue before it arrives.....
As a follow on to my last post ...basically what I THINK found out was if the sim card was configured to work only on a 3G phone..(some networks do this so that they cannot be put in a 2.5g phone and constantly roam on).....then it would pair with the Bluetooth module in Mercedes however never get recieption.
I tried this on several phones including 6233 6280 N80 E61.....just to name a few....ALL PAIRED....however If I put a Vodaofone 3g Card in then IT worked .....IF i put a Three 3G card in it didnt.....BUMMER CAUSE I'm with THREE.....
I hope this helps in some way and Im more than happy to be corrected however these are my first hand expeirnces....I WANT TO USED THE TYTN in my MErc so Im keen to help in amy way....I have unlimited access to phones...so if anyone has any other suggestions Im happy to give it a go....
Mark
At the moment, you'll find that by default the merc kit won't even see the Tytn (it's a pocket pc, not a phone as far as Bluetooth is concerned). You can hack the registry to change this, but then the phone will be seen, but pairing will fail. Hopefully, the forthcoming firmware update will fix this - I've had mail back from HTC support to suggest they know there are problems with the SAP support.
Mercedes BT
Is there anyone who had paired Nokia phones with Mercedes BT(euro spec) successfully? I had tried for several Nokia phones (6230i/6270/6280) to pair with BT ,all failed. I can just find the 16-digit PIN on Comand, no phone appears on Comand. Phone & Comand can't find each other. Do I have to set other setting except the "bluetooth setting" for mobile phone? Even I try to "search for audio enhancements" and 'find no devices' at all .
Thanks Petes,
Did they give any idea on time frames?...Did you have any thoughts about my experience with the different sim cards....
Mark
I am considering buying the HTC TyTN and the Merc Bluetooth module so I am very keen to know if anyone can get this working.
Thanks,
Ady
Nope - no news on timescales I'm afraid - just waiting for the firmware update from HTC. I'm reluctant to try the iMate firmware at the moment - until there's an HTC to go back to in case something goes awry. Has anyone had a chance to try SAP with either of the newer firmwares (iMate or Dopod) - might give us a good clue if the HTC one's going to work.
I've connected my 6230i easily enough, just remember to allow "auto connect without confirmation" on the phone after entering the 16 digit code
I have tried my HW6915 pocket pc but like the other PPC's it is not recognised
A reply I got from HTC support on 21/09/2006 asking about the Merc SAP problem was:
At present the TyTN is only compatable with a limited number of kits. A ROM update will be released shortly to update this.
Click to expand...
Click to collapse
So fingers crossed that it will be soon and solve the problem.
I asked them the same thing a while ago and just checked back in on availability. Just got ...
"At present the HTC ROM for the TyTN is being written and tested and we expect it to be released in the very near future."
So, patience is a virtue I hear....
Hello all,
My Qtek 2020 (Himalaya PH10B) fell on the floor with the headphones on, and the mini-jack for connector for the headphones broke inside it.
I successfully opened it, and I was able to see the damages. I can see only 6 pins that connected the mini-jack plug to the main board, and it seems that there could be a seventh that got broken...
Would anyone of you know of a closeup picture of this headset plug/connector ? Do you know if it is possible to find a new one ? If not, mine looks reparable still, but I would feel reassured if I knew the exact connection here
Thank you in advance for your help.
Cheers
Thomas
http://forum.xda-developers.com/showthread.php?t=225372&highlight=connector
Thank you for your answer Rudegar,
I re-soldered the connector, and I realized that a pin was indeed missing. I actually found it freely moving inside the PDA, but I could not solder it back to the connector. The results ? Well, it still does not work, unfortunately... With the headset on, it is mainly okay (there is still a little contact problem) but *withou* the headset, it still has no sound...
So :
1) Can I find this connector somewhere ?
2) Is there a way to tell the PDA not to check for the headset, and use the main speaker all the time ?
3) Would it change anything if I bought a blutooth headset ?
Thank you in advance !
Cheers
Thomas
1.) i doubt it would be a cheap option if htc had a special connector made just for their phones so i'd asume they use some sort of std component
and maybe there even is a partNr og serial on the connector
which could be used to find a replacement in R&S catalog
http://www.rs-components.com/index.html
2.) no pretty sure the switch between headset and internal speaker is don in hardware and software cant control it
3.) no with bluetooth headset you just dont use the audio connector which mean it would be empty and you'd have no sound on the pda
but it would prob solve poor contact issue of your current headset
Thank you Rudegar !
I am going to re-open it and check if I can find any serial # on the component. It looks like it is my best option. Obviously, if I find something, I will post it on that forum, so that other people can know...
Thanks again !
Cheers
Thomas
Ermm this is a very stupid question, but I appear not to be able to send recieve stuff with my brand new Hermes. If a file is selected in the File Explorer and 'Beam' is selected, then the BT search works fine, but the usual Align IR port line doesnt even appear :S
Furthermore, the IR LED doesnt turn on (I checked by watching through another phone camera, which can 'see' IR turn on)?
I cannot recieve files either, it would appear, despite beam being enabled in the communications screen and the 'accept incoming beams': nothing happens, other phones can't find the device...?
Ive searched IrDA problems, but found nothing, can anyone suggest an easy way to test (I realise this is a very noobish problem, so thanks for the time spent reading this)?
PS I am running this rom:
http://www.handy-faq.de/forum/htc_h...ermes_rom_wm6_1_wwe_s64_v2_download_2057.html
this is a new kind of problem and the thing is not everybody is using IR for their communication connection. IR is slower than bluetooth so no body bother for it. Even I have used only 5 times (may be) in two years for business card to some non bluetooth handsets
Although IR is not very popular now, I still use IR function very frequently. I use it to transfer small file to my PC which has no bluetooth function built-in, but has an IR port on it.I like the feeling of "everything always be connected".
Back to the title, you could try two things.
1) Check the settings->connection->wireless send/receive( I don't know the exact name on your phone, I use Chinese version, the english name of it is just my guess ), the check box in it should be checked.
2) In wireless manager, in its setting there is also an controlling stuff related to wireless connection, check it ,and make it appear in the manager main screen, then you can turn it on.
You can try above two thing first.
yinx said:
1) Check the settings->connection->wireless send/receive( I don't know the exact name on your phone, I use Chinese version, the english name of it is just my guess ), the check box in it should be checked.
Click to expand...
Click to collapse
just to help......its called settings->connection->beam in english
Actually I have a similar problem, though I have an Atom.
Tried flashing, didn't work for me. Guess it is a hardware problem.
When I cooked my polish rom there was an option normaly enable witch turn of the irda port. When I turn it of the irda works fine. Unfortunetly my present rom WM6.1 wasn't cooked and irda is turn off. Could somebody shaw me way to turn it on? THX.
Hi, i recently got a HTC HD Touch on Orange which i bought on ebay. The phone already came loaded with WM 6.5 on and so far i love it except for one problem. I have a Datsun 350z with intergrated bluetooth. When i tried to search on my phone it couldnt see anything, so this morning i upgraded my phones ROM to the latest Dutty's_HD_WM6.5_5.2.23016.5.0.3_Leo_R5. Since then i can search and find the bluetooth device of the car, input the pin code for it and it is added in my devices tab, however nothing appears in the "Select services to use from this device" section.
I am wondering if nyone had any idea if i am doing something wrong or whether its jsut that my car doesnt support the phone? I was also thinking about reverting back to WM6.1, would that work? Also, how do i go about getting a vanilla copy of WM 6.1?
Any help would be much appreciated,
Regards
jc0r
Just a quick update. I can get the phone to connect to the bluetooth module in the car but its not easy. Basically when i put the keys in ignition that bluetooth gets power, i then have to quickly search for bluetooth devices on my phone and then it will connect. Would be nice if the phone just connected everytime to the car like my Blackberry did. Is this hardware or software problem please?
Not that anyone actually cares about my problem but i thought i post the answer up for anyone that might be struggling in future.
What was stopping my Bluetooth working with my car was having WiFi on. When i disable WiFi the car + phone works perfectly together. In my particular situation i use my phone to connect to an ad-hoc network, and because the phone is not connected to the ad-hoc when in my car the searching constantly is causing the problem. Whether this would be the same with infrustucture mode im not sure.
Dear Group, having aquired a standalone GPS unit i decided to resurrect my HTC Wizard.
I upgraded it successfully to the WM6.1 (Manilla UI) (forgive me if the details are a bit thin, i'm new to this)
Anyways, the Wizard works perfectly, much faster than before.
But there is one odd issue, I can bluetooth music and files to any mobile phone that i choose, and visa versa, but i cannot connect to the GPS unit.
I even tried borrowing a GPS unit from a chum, but to no avail. The wizard can see the unit, i enter the password, and the bluetooth light shows for a few seconds, then i goes out again, it's very frustrating.
Can some kind soul shed any light on this please?
Many thanks
Maybe a different ROM might be the answer, what do you think chaps?
Nope, thats not it. I tried a different ROM but the effect is still the same, the GPS bluetooth light shows for a few seconds then goes out again.
It's realy frustrating as i know that it worked before i changed the ROM. I'm sure somebody must know the answer.
Maybe as I've changed the ROM it's also changed something with the Bluetooth, i wish i knew more but I've come up blank with the search facility. It's odd that i can pair with my mobile phone but not the GPS.